Tecra S5 - slow ethernet with USB 2.0 Port Replicator

Similar Questions

• Toshiba PX1173E - 1PRP USB 2.0 Port Replicator II windows 7 drivers

  Hello, I can, t find windows7x64 drivers for my Toshiba PX1173E - 1PRP USB 2.0 Port Replicator II. I find the driver for win vistax32, but it's not work.

  Hi Michel,.

  The point is that 32-bit drivers will not work on a 64 bit OS and you can get all the drivers on the Toshiba page:
  http://EU.computers.Toshiba-Europe.com

  But it seems that there is no 64-bit available driver and you can use t Port Replicator II with 64-bit so far :(
  Maybe Toshiba going 64-bit in the near future

• Satellite Pro M70: What USB 2.0 Port Replicator is compatible?

  Would be grateful if someone could advise me on the purchase of a USB 2.0 port replicator.

  I think the 3 USB 2.0 ports on my laptop Pro M70 are not enough, and that's why I want to buy a USB 2.0 Port Replicator.

  The site of the Toshiba shop specifies USB 2.0 Port Replicator II (UK) with port network, part number: PX1173U-1PRP, price: 49,93 GBP.

  It has 4 USB ports 2.0, which would give me a total of 6 USB 2.0 ports, which would be the absolute minimum I want. (It also has 2 PS/2 ports, 1 serial port RS232 and 1 USB 2.0 port network that takes in charge rates of 10 / 100 Mbps).

  Can anyone tell if it is powered by the laptop, or by it's own adapter?

  Unfortunately, the Web of Toshiba site has advised that it is currently out of stock and are difficult to get in on all the time, as they are the subject of a sort of "green manufacturing" test.

  This prompted me to consider buying a replicator USB 2.0 ports alternative and all I would prefer one with more than 4 USB 2.0 ports, and in fact 6 or more USB 2.0 ports would be preferable. I'm not really interested in other types of ports that are often provided with the replicators of USB 2.0 ports.

  I would be grateful if someone could recommend/Advisor at a replicator USB 2.0 ports alternative that would be compatible with my laptop Pro M70.

  One of my concerns is how the port replicator USB 2.0 Port is powered. I think I would have preferred that the unit is powered by its own adapter, I understand is 5 Volts with 500 milliamps for each port, rather than to the laptop (probably would be less tax on the laptop, with less heating).

  Thank you
  AlanCB

  I can't comment on the question whether the Replicator you mention has its own power source, although I suspect, he does

  However, I have a satellite Pro M70 too and with a similar problem and wanting a hub to connect to all my external printers, Sandy etc using just one connection, I buy PA3390E-1MPM - a hub of Toshiba, Audio/USB multimedia center, which goes a step further and provides a hub not only for USB sources , but also for the speakers etc.

  It has its own power supply to the unit and connects via USB 2.0 to my laptop. It is also stackable with the Toshiba Gigastore 250 GB USB 2.0 external hard drive (PA3392E-1MPS) which I also use for backups, storing external data etc.

  Had the two units for 3 months now and everything works fine. I got headr of some problems with people in loss of access to the hard drive, but it seems that it was never if it has been disconnected by pulling the cord out usb, rather than make a ' Safely Remove Hardware to disconnect the USB device and so far have had no probs at all

  It has 4 ports, more port network and connections from the speakers for the configurations 2/2.1/4/4.1/5.1 full, more Creative software like drivers, more remote control useful to control audio devices. Oh, and also a Surround sound, and EAX

  Maybe a little more of your option, but worth it in my opinion. If you can't find it on the Toshiba site I have purchased from www.insight.com

  Hope that helps
  Steve

• LT2323z - connect to the USB 3.0 Port Replicator

  I just bought the LT2323z monitor to go with a X carbon 1 and connect via the USB 3.0 port replicator.
  However the LT2323z has displayport digital connections and the DVI-d port replicator. Any ideas how to connect to their place? Here are the flagship of Lenovo products, bought directly with Lenovo, but they do not seem to be compatible. I'm missing something until I send them all back for my money!

  The LT2323z, take the VGA connection, which takes care of your USB docking station 3.0 with the adapter DVI to VGA, which is included in the box. But the quality of the video connection is not terrible.

  There is no solution from docking station USB supported displayport. If you need to connect to the screen, you must use a direct miniDP to DP cable connector (which is unfortunate).

• Tecra M11-LaTeX runs slow on external monitor using Express Port Replicator

  Hi all

  I am having trouble with my Tecra M11 with an external monitor, through an Express Port Replicator II.

  It is very accurate, but I am running texlive 2010 on my laptop to write a thesis. Whenever I use my laptop screen feature is very good, and it works very fast, no lag when I compile my document. As soon as docking it into my docking station at work to use it on a big screen, whenever I use the same program, it slows down a lot, finally causing the crash program. Its frustrating to lose a lot of your thesis like this! When I connect the external monitor directly to the laptop, it works fine again.

  Something goes wrong in the docking station. Anyone know how I can fix this? Im a little confused and ideas. Maybe I pilot or something im unaware of. My docking station is maybe defective?

  Thank you

  Jake

  Port replicator port on which do you use? VGA or DVI?

  It won't be easy to provide the answer to your question. It is not possible to test all the software available with docking station and research solutions.
  I would say: bad luck.

• Hi speed USB via a Port Replicator advanced for a Tecra 9100?

  I have the same problem with a Tecra 9100 and upgrade to hi speed USB as a previous post where the proposed solution was to use a PCMCIA card.

  (see link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=24103)

  I had an idea, but I don't know if it will work and need some advice?

  Can you buy an Advanced Port Replicator that has Hi Speed USB 2.0 ports on it (like the PA3082U APR II that works with the Tecra 9100) instead of the PCMCIA card.

  If the docks of Port Replicator in the motherboard will it give you Hi Speed USB 2.0, or is the Tecra 9100 forced to USB 1.1 via hardware in the laptop itself and the Replicator will not help?

  Also if I go down the road of Port Replicator I need drivers for speed ports Hi of the Replicator to work on the Tecra 9100?

  Or to ask the question – what is the PCMIA USB 2.0 card in that advanced with HI Port Replicator speeed USB is not?

  Thanks in advance

  Hello

  the Tecra 9100 has NO usb 2.0 and it's a fact. Given that the Replicator has these USB ports 2.0 does not mean that your machine when it is docked to the Portrep, is able to manage USB 2.0 devices. The portrep, it's like a usb hub and behaves like. So if your machine doesn´t have it then that's it.

  And the explanation on the PCMCIA/Cardbus solution:
  The pcmcia card USB 2.0 Chipset, this is the reason why it IS a USB 2.0 device (roothub).

  I hope this was clear to you :)

  Just buy this card and you will have USB 2.0

  Welcome them

• what external hard drive should I buy to save a 2009 MacBook Pro with USB 2.0 port?

  I want to back up the hard drive on my circa 2009 MacBook Pro (13 '') with Snow Leopard.  There are so many things out there and I want to get the right one!  My MacBook has only a USB 2.0 port.  I need to do this because I take the machine to have the battery replaced and because I am buying a new machine soon and would like to transfer things I backed up on my new machine.  Any recommendations for what is the most appropriate portable drive would be greatly appreciated.  Thank you in advance.

  Frances

  I use this external enclosure: http://eshop.macsales.com/item/OWC/MSTG800U3K/

  Can take any 2.5 in drive (HD or SSD).  I swap currently 3 bare drives (WD 750 GB Black) for familyvideos/data, clones, test data discs.  $72 seems expensive, but it has Firewire 400/800 and USB 2.0 and 3.0 interface for use with many computers.

• Mobile Mouse 4000 stopped working with USB 2.0 port, works with 3.0 port.

  I just bought the Mobile Mouse 4000, eventually find the necessary drivers, installed, but still does not work, after plugging in all my USB ports so I decided to plug in on my single USB 3.0 port, it works. Nowhere on the site, or on the box does say USB 3.0 required, I went through my device manager and all the usb ports work correctly, even, I went in the power options and turned off the selective USB power option so that they are all on. How to work with normal 2.0 because I would like to save the port 3.0 for my WD external hard drive.

  Original title: is the Mobile Mouse 4000 only USB 3.0?

  Hello

  1. What is the brand and model of your computer?

  2. are you able to work with other USB 2.0 devices normal port?

  3. what happens when you try to plug the USB key?

  4. What is the operating system installed on the computer?

  I suggest you to connect the mouse to another computer and check with the question.

  Method 1: Run the Fixit described in the article:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  1. click on Startand then click Control Panel.

  2. click on system and Maintenance, click System, and then click Device Manager.

  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  3 in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  4. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  If you are still having the same problem then you can check the device USB drivers updated using windows update.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps.

• Satellite C850D-115 - problem with USB 3.0 port

  Maybe you are my last chance to solve this problem.

  I bought a C850D-115 PSC9UE-00N00MGR without BONES. I've installed two times Windows 7 top on two different partitions.
  I downloaded and installed all the drivers needed from the Toshiba site and updated on day of Windows 7.

  My problem is, the driver for USB 3 AMD do not work,
  My 3 USB ports do not work and I cannot use it. It will work if I disable the USB 3 and use it as USB 2.

  Device Manager says driver is not installed, while AMD Catalyst Control Center says driver is installed and running.

  Someone knows how to fix this?

  Hello

  Toshiba technical page shows the laptop supports 2 x USB 2.0 ports and 1 x USB 3.0 port

  I m wondering how did you test the USB 3.0 and selected the correct port?

  You said that you have installed all necessary drivers have you installed all the drivers available from the Toshiba page?

  I found this [USB 3.0 driver v2.0.7.176 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 7516 selSh ortMod = 3620 & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 3 & ID = 87792 & OSI D = 30 & driverLanguage = 42]

  Have you installed it?

• The Xbox 360 wireless receiver only works on a PC W8 with USB 3.0 ports?

  So my question is: is the X Receiver 360 works on a USB 3.0 port or not, because I think to buy one, but I don't know if it will work or not.

  Hello

  Reference:

  http://support.Xbox.com/en-in/Xbox-360/accessories/Xbox-360-Wireless-gaming-receiver-Windows

• Tecra 8100: Don't know if the Network Port Replicator II is working properly

  I had a PA3017E-1PRP, i.e. a Network Port Replicator II, for my Tecra 8100. The fact is: I don't know if it works. I plug the computer in and no new material appears. At least the 3Com NETWORK adapter should be recognized, but no sign of life is presented at all.

  In addition, the USB ports does not work, but at least, the leds of the watch of the computer there is come from there because they show that battery is charging and the power comes from the DC.

  So, how can I check that everything works correctly? The computer is Windows XP SP2 installed, and I installed all the drivers and the support of the utilities (common modules, mobile and other extensions) util Toshiba USA and Toshiba Configfree of Toshiba Asia...

  Hi Toka

  I really put t know why you install software mix on your device. In my opinion, you should install European tools and utilities if you live in Europe. But if everything works it is also OK. I just want to make this comment because I don't know if all tools can consort with each other.

  As much I know this unit only is not supported for Windows XP Home in Europe. If the US page has mobile extensions for Windows XP Home edition, I assume that it has been tested.

  You can use a ports from there or all of them are dead?

• Satellite Pro M10: IO error, cannot read DVDs/CDs, USB driver for Port Replicator

  I had to format my m10 pro like the multidrive dvd kept as an IO error and refuses to read my dvd/cd etc.
  I reloaded all software and the multidrive dvd (Panasonic coursc 810) will always return the same IO error.
  I have also continued to asked a USB driver load? Replicator port, I can't find my original installation CD?
  Someone help please?
  Thank you very much
  Joe Dawson

  [Edited by: admin on 21 January 06 16:24]

  Hello Joe

  I saw in some your previous assignments that you use external DVD drive too.

  I use my Tecra with Replicator port and a multi LG external DL disk attached to the port replicator (due to the fast data transfer firewire connection). Everything works fine and I wonder how you can have all of these problems.

  If your device is set up correctly, including all the original drivers, tools and utilities that you can find on Toshiba download page should not have any problem. I hope that you have installed the unit without port replicator and you don t forget Mobile extension tool. As much as I know there is no driver for Replicator port and all the signals are loop just to the ports of the replicaror port.

  What is the status of the Panasonic player in Device Manager? The drive is displayed in Windows Explorer?

• USB 2.0 Port Replicator II - need drivers Vista

  You have the drivers windows vista for usb port replicator?
  Thank you.

  I don't know who you mean with you, but it will be interesting to know what model of laptop you have.

  Is your model of laptop that Vista supported?

  As far as I know that it is not necessary to install drivers for PRII. I use the same with my Tecra (WXP).

• Need drivers for USB 2.0 Port Replicator

  I just bought a Satellite Pro laptop computer with the Windows Vista operating system. I would use my replicator USB ports, but you need to download the driver for this? Can someone tell where I can find a site for me?

  Hello

  I Don t understand why you need the drivers for a usb port replicator? Usually you don t need drivers because windows automatically installs the port replicator.
  Would be interesting (and useful) to know that you have materials. Tell me what portreplicator and mobile you have.

  Would appreciate some comments.
  Welcome them

• Compatibility issue on Satellite Pro A60-129 and USB 2.0 Port Replicator II

  It is: are they compatible? I bought the Port Replicator, loaded drivers and plugged.
  All the lights come on as it should on the 4 USB ports, and the device manager says its working properly. But if I plug the router in there (instead of directly into the USB port of the laptop), or if I try to plug in the mouse inside (once again, instead of directly into the laptop) or work.
  He also seems to have some effect on Windows - where when I try to stop the machine, it "hangs" in the section "Logging Off", until I physically unplug the duplicator.

  Any guidance appreciated.

  Hello

  I don't know what the problem is here, but you should try to download and install the latest available driver from Toshiba support page Package. You can find it under http://eu.computers.toshiba-europe.com > support & downloads.

  Product type OPTIONS
  Family CONECTIVITY
  Series of products DOCKS & DUPLICATORS

  You will find driver Package for Windows XP Home edition.

  By the way: perhaps some additional software for mouse blocks or a modem. Who knows