Tecra W50-A-118 - no Fn - F2 after ECO Utility 3.0.1.6403 update

Similar Questions

• After ECO Utility update missing TecoPower.dll

  Sorry, I'm somewhere in the middle of Europe and I can't speak English so well.

  I have a problem: after updated eco Utility in my laptop and it restarts and then whenever I start my laptop it's just watch: System failure: TecoResident.exe cannot start because there is missing TecoPower.dll. I read that this file is very important, but my laptop doesn't actually still works very well. So please: what should I do? Thanks a lot for the answers...

  Robert Berzkowitsch

  I have the same problem.

• Satellite L70-A-118 - problems with WiFi after Windows 8 to 8.1 Win update

  Dear Sir/Madam,

  After that update of Windows 8 for Windows 8.1 WiFi disconnects regularly and if there is a connection
  the connection is limited.

  I followed the update instructions I downloaded with the Windows 8.1 drivers.

  The WiFi LAN adapter settings are intact on DHCP.

  Waiting for assistance to help me a stable wifi connection.

  Kind regards

  Low van Leeuwen

  Two weeks ago I've updated my Satellite U940-103 and everything went well. There is no problem with WLAN. I use it all the time.

  What model of laptop do you have?
  Have you installed the driver for the Toshiba download page or driver provided by Windows update (sometimes classified as important update)?

• Tecra W50 - Has R/W - speed and performance

  Hi, received the new Tecra W50 - a and have to say I'm gutted with the speed and performance.

  8.1 we partitioned the drive 50-50 and the reading/writing is terrible. If I copy from C: to D: I lucky to get 10 Mbps

  Copy from or to external Sata I get more of 50mbps and around the same by ethernet.

  I got rid of the partition and tried to copy locally and get the same result.

  The Task Manager displays disk to 100% performance all the time and I can't do with my machine while copying going on.

  Copied 2gig file 1 and it happens in seconds. Try a folder with a few thousand of files and everything grinds to stop.

  Any ideas greatly appreciated

  Type of drive is MQ01ABD100H 1 TB and I have 3 machines to do the same thing

  Thank you

  Lee

  Type of drive is MQ01ABD100H 1 TB and I have 3 machines to do the same thing

  There is an SSHD (SSD hybrid drive) a combination of SSD and HDD.
  SSHD performance depends on the cache controller (SSD).
  Why?
  The flash cache is used for the most used data... the special controller must decide what data will be loaded into the cache.
  But the SSHD needs some time to 'learn' data that uses the cache and the write speed at the beginning would be similar to the common HARD disk.
  After some time this performance will increase and the SSHD should reach the higher writing speed.

• Tecra w50-a-114 - Intel Wireless Display not working / available

  Hello

  I want to ask question on Tecra W50-A-114. My boss bought this because in the specifications tecra was there Intel Wireless Display.
  But now, he wants to use it, connect to the projector, but missing buttons or the applications for it.
  OS is Win 8.1

  I tried to install the software driver Intel WiDi toshiba support pages for its Tecra w50, but installation finished with error that there is no graphics taken in charge?

  Ghaphics is Nvidia Quadro K2100.

  Why I don't get error message there is no graphics supported when I use the automatically detected driver support page toshiba, as well as its specifications in this laptop has Intel Wireless display?
  How can I make it work?

  Thank you very much for the help.

  Martin

  Try the latest version of the intel.com Wifi software
  https://Downloadcenter.Intel.com/Pro...Ay-Intel-WIDI-

  Update the display driver Intel can help too (from intel.com)

• Tecra W50 - A Replicator III, Audio USB problem

  Hello

  I use a port replicator (Toshiba HI SPEED PORT REPLICATOR III PA5117E-1PRP) with a Toshiba Tecra W50 - A with Windows 7 (64-bit).

  I need to use the audio input to speaker and microphone on the Replicator, but no sound is coming or in.

  When I anchor my port replicator (Toshiba HI SPEED PORT REPLICATOR III PA5117E-1PRP), then an unknown device appears in the Device Manager with then the Advanced USB Audio Driver name.

  I was unable to find a driver on the support pages.

  Can someone direct me to the appropriate download area please?

  Help is very appreciated.

  Concerning
  Christian

  Hello

  It is very interesting how Toshiba cares about the problems of their users.
  I think this is the last time I bought some stuff from them.
  Maybe I'll go back to DELL. They care more.
  My post will be probably deleted now...

  Christian

• Tecra W50 - cannot start when installing the second hard drive (caddy).

  Hi all
  I have a Tecra W50 PT640A 04103NN1.
  When a second hard drive is installed in the Bay of DVD player cell phone will try to boot from the drive bay, not the internal drive
  This second drive has no operating system installed and so the fails to start.

  If I hit F12 at startup and select HARD drive, while the machine starts correctly. That is starts on the main hard drive.
  Change the order of boot in the BIOS makes all the difference; He will always try to boot from the second drive bay drive first.

  All known A it works correctly?

  Thanks in advance!

  Hi Doppelfrog,
  I had the same problem with my W50, got my HDD caddy a few days ago.
  You have a bit of luck to fix this problem?
  I believe that the Bios for this laptop is not developed to serve both drives (like the computer I had that one drive Bay) and it is not possible to prioritize the witch THAT HDD should start first...

  Kind regards
  Marcin

• Tecra W50-A-114 - blinking display - brightness up and down

  Nice day

  + First of all sorry for my English. +

  I have problems with the display on my tecra w50-a-114. * Sometimes display blink (ca for 5 min.) (brightness go on 100% and then again the current settings). *

  I don't know what happened. I'm not aware that I changed a few settings. I have check all power management settings, but each parameter is in my opinion very well.
  Do you have idea what happened?

  _Thank for all suggestions. _

  Hello

  I assume that the level of brightness of display changes no matter if the laptop is connected to the mode of battery or AC adapter? Is this correct?

  Usually, the function FN + F7 and FN + F8 keys increases and decreases the brightness of the computers.
  But I put t think that theses function might be related to your question.

  For me, it sounds a bit like hardware issue of Billboard, but it's only my personal opinion

• Question about viewing on Tecra W50-A-104

  HI, I red a good review on the Tecra W50-A-104 on notebookcheck and they say it rises from this Panel and it is a very good display:

  * 15.6 grips 16:9, 1920 x 1080 pixels, TOS508F, IPS LED, 92% sRGB, brilliant: No. *.

  But if I go to the Toshiba.de I see that specifications are:

  * type: anti-reflective display eDP Toshiba Full HD TFT high brightness with backlight LED, 16: 9 aspect ratio *.

  A TFT instead of IPS

  They are the same characteristics as the W50-A-116, which is available in my country, the Italy. I am interested in the W50-A-116 of course and I want to know if the 116 and 104 times the same mount slab IPS as says the review.

  Thank you
  Haitham Jaber

  Both Tecra models have the same part number - PT640E then I'm 100% sure that both models have the same display. It is 15.6 FHD 300 SFCL LD-DISH EDP (TFT Color LCD IPS) Full HD.
  I can imagine that the description on the Toshiba and some independent Web page is not the same.

  Tecra W50-A-116 with PT640E-06603KIT part number is available in Italy.

• How is it that after I put 41.0b1 as a 'update crucial"my youtube DVDVideoSoftware updated buttons are disabled?

  How is it that after I put 41.0b1 as a 'update crucial"my youtube DVDVideoSoftware updated buttons are disabled?

  Maybe it's because the add-on is not longer supported by the latest version of Firefox. You can try to see if a new version of the add-on is available and can be downloaded. If this is not the case, contact the developer so they can inform you of alternatives or when the add-on is working again.

  Thank you!

• TB 31.5.0 Win 7 after the TAB key for the automatic update no longer creates new address line "write" (enter the done key) but I want the TAB key! Why this keep happening after

  TB 31.5.0 Win 7 after the TAB key for the automatic update no longer creates new address line "write" (enter the done key) but I want the TAB key! Why is - this seems to happen after each automatic update? Cant we get 'option' to use the TAB key to navigate through the lines of address "write"?

  TAB through the fields that exist. It is the function of the TAB.

  Otherwise you could never use TAB to go out in a field for example: subject. It would create an indefinate number of fields and are unable to function as a TAB key.

  TAB does not back to THE fields,
  New crests to THE fields or donkey typing/selection enter/return address, you can use the selection of mouse click.

• How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please?

  How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please? If possible, please cover all platforms, Mac, Windows, Linux, although the first mentioned is what currently applies to my situation.

  Thank you.

  Such a download is usually recorded in a updates or updates folder in the program folder or the Firefox application.
  You can delete this folder to cancel the download.

  If the files have already been downloaded, then delete the files in the folder updates\0 and updates.

  • http://KB.mozillazine.org/Updates_reported_when_running_newest_version
  • http://KB.mozillazine.org/Software_Update

  Mac: /Applications/Firefox.app/updates "/path_to/Firefox.app/Updated.app"
  Linux: "/path_to/firefox/updated"
  Windows: C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  

• my iphone 5 c opens more after that I was invited to be updated with itunes. now, the display shows only itunes usb cable and logo. read some tips here, but nothing happened. any help will be much appreciated.

  My iPhone 5 c opens more after that I was invited to be updated with iTunes. now the display shows iTunes logo and the USB cable. I have read and applied some tips here, but nothing happened. Any help will be much appreciated. Thank you.

  https://discussions.Apple.com/message/30014877#30014877http ://

  Read the post from sierrawren . It helped me to fix my phone. Now it works perfectly fine. Hope it can help others too.

• Satellite L850 - after that the WLAN of WIn8.1 update light is always on

  After Windows 8 for Windows 8.1 update the indicator lamp amber wireless is always enabled, even though the wireless feature is disabled.

  The key to turn on or turn off the airplane mode does not work.
  Wireless works in any case perfectly and enabled or disabled with the mouse.
  Is there a solution to make it work as before the update?

  Thank you

  This topic has already been discussed in another thread, and the SOLUTION can be found here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=73900

  Please don t start different threads on the same topic!

• The digitized files disappear after that scanning with HP Solution Center update

  The digitized files disappear after that scanning with HP Solution Center update

  Have a HP Officejet Pro L7590 all-in-one.  Under Vista 64-bit.

  Updated my Center of solutions for version 14.  Now when I scan something, it scans OK then when I save to file it away.  Looked on the HP site and found Update critical for this problem, however, the critical update is to version 13 and when I try to run it it tells me I need not and will not continue.

  Also: (maybe something to do with the problem) when using the / opening of the solution Center, when I goes to the buttons "ScanPicture" or "Scan a Document" and then click on "Change settings" there is nothing in the drop-down list for the ' Scan To: ' section.

  Have tried uninstalling and reinstalling several times.  Does not work.

  See you soon!

  Hello

  Two questions actually related to each other.

  Please, try the following:

  Make sure that the HP Solution Center is closed.

  Enter C:\Program Files (x 86) \HP\Digital Imaging\bin and search for the file hpqxmlul.dll .

  Move this file to a temporary folder elsewhere as your office, just to backup porpuses.

  Download and save the following file to your desktop, remove it by double-clicking, a new hpqxmlul.dll file appears on your desktop.

  Move this file in C:\Program Files (x 86) \HP\Digital Imaging\bin.

  Today the launch of the HP Solution Center and test analysis, check any changes with the sweep for list as well.

  Please let me know of any changes.