Tecra Z40-A-12Z - frequent crashes in the morning

Hello

I have a Tecra Z40-A-12Z with 7 fully updated Windows (Windows Update AND Tempro).

When the PC goes to sleep, very often, he refuses to wake up: sometimes the screen remains blank and I have to do a long press on the i/o button to force a shutdown and then it reboot. Or sometimes, I get a BSOD with 0x9f DRIVER_POWER_STATE_FAILURE message.

Someone knows what's the problem?

Hello

I googled a bit around (error code) and there are a few hits in the google list.
According to some people with this problem, the problem might be related to one of the drivers installed
Probably one of the devices doesn't wake up upward or doesn't function properly after wake-up system. This can cause the BSOD.

One of the users in the Microsoft community solved the similar problem, update the Intel graphics driver.

I think you should check all the drivers maybe you should also get the laptop back to factory State and should test the functionality of the system immediately after that the laptop was recovered.

Tags: Toshiba

Similar Questions

  • Re: Tecra Z40, Win 8.1 - malfunction of the fingerprint reader

    DESCRIPTION OF THE PROBLEM:

    My Tecra Z40 arrived with Win 8.1.
    From the beginning I couldn't use the fingerprint utility.
    When you access the utility won't happen for a while and then the error: "Could not connect to the fingerprint reader" has finally popped up.

    I could also not use the actual construction of fingerprints 8.1 Win (error: this device has biometric devices is not suitable). (PS mind that this built in function is now integrated into the subway and no device biometric parameters are not now present in the control panel to 8.1 win!)

    The problem has persisted despite the last fingerprint utility (which comes with the drivers) have been installed to win 8.1. 64-bit directly from the website of TOSHIBA and despite that a biometric device was still present in the Task Manager ("this device is working properly").

    SOLUTION:

    After literally weeks of research (including getting help from the shop and service Toshiba), I could finally solve the problem.

    I uninstalled the driver and the reader of fingerprints from the Device Manager (then only fingerprint reader drivers really disappear).
    Then I cleaned the registry (I used CC cleaner software) (or install new wasn't a reason any).

    Finally, I installed a Fingerprint Utility equivalent and the driver for Tecra Z50 (fp - sw - 20140605164020.zip) (which I expect to be using the exact same sensor)... and since then everything works fine.

    I can now access the utility of fingerprinting and fingerprint log on in Windows.

    SUGGESTION OF CORRECTIVE MEASURES:

    It seems the driver on Toshiba support website (I think for me it was the Poles) for my exact machine (made by TOSHIBA - detector.exe) is incorrect.
    To make matters worse the driver does not communicate useful information on his miss - fit in the Task Manager! If I had to recalculate, in money, as long as I have and a whole lot of support persons had spent on it, there really meaning to improve this list of drivers!

    (PS: one of the files in the same directory online regpatch has a virus (VIRUS A Yes) it has been recognized by Antivir!) -Toshiba, you can communicate with someone responsible for the Polish support site!)

    OUTSTANDING ISSUES:

    No fingerprints, login is possible in Mozilla or Internet Explorer despite the appropriate plugins have been installed as well as the utility of fingerprints, where the web password option has been activated. (no suggestion seems to appear to reach the service fingerprints for the sites that require passwords, maybe that your service gets blocked by popup blocking browser protection?).

    I'm really looking forward to this feature.
    Make sure that the plugins work correctly with the latest browsers.

    Greetings

    Hey thanks for this interesting thread and a detailed description.

  • Frequent crashes causing the stoppage of work

    I'm having a lot of difficulty with the computer crashes almost all the time making me lose what I'm getting.  I have Trend Micro Internet Security installed and run it frequently to keep my computer free of malicious viruses and malware/adware software.  I used Dell to help verify the hardware that does not appear to have any problems, therefore leading me to suspect the Windows software.  I used the Windows repair without success finally restore the computer to its original state.  That didn't solve the problem either so I eventually resorted to reinstalling Windows Vista again which has not cured the problem either.  In the process, I also lost all the photos and other files that I would like to be able to restore it if possible.  I need help about where to go from here to solve this problem with the accidents, but also issues sometimes get the same opening windows.  Help, please!

    Hello

    Begin with, if the system is crashing after a new installation, then you are missing a necessary driver for Dell equipment or a component is defective. Hardware Dell Diagnostics does not test all the components, just memory and hard drives. You have a motherboard problem.

    Precisely diagnose what is wrong is best done by someone with physical access to the machine, but you can post text and details of stop (blue screens) errors and it can lead to some preliminary indications to at least point you in the right direction. To be specific, as "my system crashed" doesn't tell us much, the details are necessary for a significant response.

    Continuing to reinstall will not solve the problem. If the system is still under warranty, you must contact Dell immediately to protect yourself from costly repairs.

    Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

  • frequent crashes on the Macintosh

    Muse and other CC 2014 applications are constantly crashing and works way too slow, even when it comes to very simple tasks. Everyone knows the same problem.

    It happens when opening a file in particular? Have you tried to create a new site and repeat the process. See if Muse is always cold. In addition, where the muse file, is it on any network/cloud drive or local drive?

  • Tecra Z40 - Has - frequently freezing / hanging under Win 7

    Hello

    I have toshiba tecra z40, a laptop brand new, that I use for two weeks my laptop frequently freezing and hanging

    After that not able to do anything I force restart

    OS win 7 64 bit 4 GB ram i5 processor

    Pls suggest...

    Concerning
    Vishnu K

    Hello

    Do you run a specific application while the laptop freezing?

    These symptoms may be related to some software conflicts between installed applications or some drivers not work.

    Have you ever tried to recover the laptop back to factory settings?
    Otherwise, I think you should try this procedure and it must conduct audits after the device has been recovered...

    Please also keep an eye on the MS updates would install automatically... sometimes it may happen that MS updates could confuse the system, and finally the windows would start freezing

  • Frequent crashes - using 900, 00 k + memory, multiple tabs open - is the memory use a problem?

    I have a frequent crashing Firefox, several times a day.

    I have several tabs open, 100 +, and the memory usage is around 900 000 and more.

    I wonder if the memory usage is the origin of the crash, or something I can fix it?

    My task manager says that I use 67 percent of the available memory.

    Total: 2941

    Caching: 1202

    Free: 74

    Total: 207

    Paginated: 153

    No paged: 53

    Pagefile 2981M / 6116M

    This is the id of the 10 reports last crash:

    BP-c79bc97e-D502-4319-a49e-7bc0b2130917 9/16/201311:38 PM
    BP-19f60b05-F268-4693-B622-066f42130917 9/16/20139:59 PM
    BP-f43d9597-9023-487A-90d4-994d32130916 9/16/20137:15 PM
    BP-b552cdc4-6920-4EED-bff7-cb7cf2130916 9/16 / 20136:16:00
    BP-b62272cb-f4ef-4F30-ACC9-4a1752130916 9/16 / 20135:14:00
    BP-f4bebdd3-20f9-4444-8245-520c42130916 9/16 / 20133:20:00
    BP-bad99992-5b2b-4ac1-96bc-e03812130915 9/14/201311:31 PM
    962c451e-DC19-4707-9def-b2dd5cd4caed 9/14 / 201310:19:00
    BP-8de4bc69-0f86-417A-9727-e88622130914 9/14/20132:29 AM
    BP-6ae9815f-1472-492d-8738-1cd842130914 9/14 / 20131:01:00

    Where can I set preferences for dom.ipc.plugins. *? (I see no plugins or extensions of Tools-Addons that resemble a dom.ipc.plugins?)

    Extensions I have are:

    AddBlock

    Protection of navigation

    Troubleshooter

    YesScript

    PLugins:


    Java

    Shock wave

    Could you point me to where in mozilla crash reports that I would find the number of open tabs and memory as being the cause of the accident? (just so I can check after I have try to reset that plugin.exe run to start again I can take a look and see if the memory usage is better - or should I look at the Task Manager for that information also)?

    I noted the crush in the report was "EXCEPTION_BREAKPOINT", I guess that's a reason for exception error due to many different causes?

    I also noticed a report of incidents listed:

    Total virtual memory: 2147352576

    Available virtual memory: 533061632

    System Memory use Percentage: 72

    Available page file: 3324129280

    Physical memory available: 852447232

    What is the indication of memory, you see?

    Are these 'bad' (high usage) values of memory?

  • Activate the TPM on Tecra Z40

    I have a number of Tecra Z40 I'm setting up a client for a deployment of Windows 8.1. They have a manufacturers mish mash and so far I left Toshiba because it seemed not as suitable for companies like HP and Dell.

    Other manufacturers have mechanism for handling the BIOS so I'm after smilar tool

    did someone familiar to a tool that I can run TPM for a build process?

    Thank you

    Usually, you can change the settings of TPM in the BIOS...
    On Toshiba laptops, you can also find a preinstalled software Toshiba HWSetup as Toshiab Security Assistant.

    These own Toshiba tools offer different options that are also in the BIOS.
    The TPM module must be listed using one of the tools mentioned

    Here check the box of "security assistance".
    https://support.Toshiba.com/support/...tentId=3368363

  • Tecra Z40 - Caught in the loop of pre-launch workspace Ironkey

    I have implemented an Ironkey with Windows To Go and managed to boot into it since several H.P. machines and even 3 years A.c.e.r.

    However, when starting on my Tecra Z40 - has, the workspace of pre-launch Ironkey load and shows the standard message that she is about to start on Windows and will restart.

    After this restart, it starts again in the same workspace Preboot screen, reboot, same message, same workspace.

    I guess there is something in the BIOS that needs to be changed to get this working, but have no idea what it could be.

    Ideas? Thoughts?

    I guess you try to start the system (Ironkey) external USB flash memory stick
    Well, to start a laptop equipped with the UEFI BIOS, first you must disable secure boot option. It is in the BIOS settings.

  • Tecra Z40 - A - the upgrade (RAM RAM)

    Hi all

    Ordered little RAM to upgrade my Toshiba Tecra Z40 - A, but can not find, for the life of me, anything where you want to insert online.

    I previously installed RAM under the keyboard (couple of clips holding it) and on the other, a small cover on the bottom, but the Z40 does not appear to be anywhere easily accessible.

    Has anyone upgraded RAM on the Z40? Or is it a big no, no, because of the guarantee?

    Thank you
    Lance

    Memory upgrade on this model Tecra is a bit complicated and, in my view, should not be done by the owner of the laptop. For some models of Ram upgrade can be done by the owner of the laptop and exact instructions how do proposed in document s user manuals, but not for your Tecra.

    For full access to the RAM modules lower lid should be removed and it can be done by people of service only. If you do this alone you can void the warranty valid.
    I recommend you contact the nearest Toshiba service provider in your country and ask for help or advice.

  • Tecra M2V crashes during the Windows 2000 format

    I'm working on the installation of Windows 2000 for a laptop Tecra M2V in my school. The installation process crashes when the disk has reached 6% format. It is always in the same place that the deadlock occurs. Is there a way to get around this, or can I change a setting in the bios Setup? Any help appreciated.

    Hello

    Not easy to say what can be the problem, but if the formatting process always freezes at the same place I assume that there is a problem with the HARD drive sector faulty or bad. I recommend you to check the HARD drive using a tool. Google a bit and you will find many tools for free.

    Good bye

  • Tecra M2 crashes when the Intranet navigation

    We have two machines Tecra M2 in society which connect to the office in our company LAN. When they are used to surf the Internet, they are very good - speeds are OK and load pages correctly. However - when users browse our intranet of the enterprise, pages loading slowly and the whole machine is tied up, while the loading of pages.

    These are the laptops only where it occurs on. Desktop computers are beautiful and other models of Tosh are OK. All the world experienced this or found a fix?

    Hello

    In your case the very important is that the feature network is OK. If you have this kind of problem, first you must contact your local network administrator. I'm sure they have a good explanation for this issue.

    I'm not an expert in LAN, but please ask your LAN administrator if you are using a Proxy Server. Check in your browser under Tools > Internet Options > connections > LAN settings > Server Proxy option. If the option turn on, you can find there an option called proxy server for local addresses. Activate this option.

    I'm sure it should work much more quickly.

    Good bye

  • Tecra Z40 - A - win 7 blue screen of death (BSoD)

    I have 3 times the BSoD on TECRA Z40 - A experience running windows 7 64-bit English last month!

    No new hardware has been installed, only the Toshiba and Windows updates carried out official.

    I have attached two screenshots from the dump files, files that have probably caused the crash...

    BSOD appears due to serious system problems or malfunction of the equipment.

    I think first of all you should get the phone to the factory settings.
    If this does not help, the parties must be checked.

    I think RAM memory modules.
    It is very important and must be checked in the first place.

  • Tecra Z40 - A - 16 c - indicator battery life problem

    Hello

    As from 2015, I own a Toshiba Tecra Z40 - A - 16 c.

    I noticed a strange behavior regarding the battery life indicator. When the laptop is fully charged, the indicator shows 100% remaining. And when I use the laptop, the percentage drops slowly, as expected.
    However, as soon as somewhere around 50%, the indicator is suddenly decreases and says he has only 5 or 4% left and I should switch it on immediately.

    Any ideas on how to solve this problem?

    Kind regards
    Oliver

    The battery may need calibration. Load and unload completely several times.

    If it happens again, the battery needs replacing. You can check the level of wear using HWMonitor from cpuid.com.

  • mSATA SSD + 2.5 "HD on Tecra Z40 - B - 12 p

    Hello

    soon I'll be getting a laptop Toshiba Tecra Z40 - B - 12 p, reference PT45GE-06S03F7J, it comes with a 250GB SSD mSATA. I want to know if it is possible to install a second hard disk 2.5 "additional or I have to choose between having a regular vs 2.5 mSATA SSD" HD.

    Thank you.

    Well, some models are equipped with an mSATA SSD instead of a hard drive.
    But there is only one place to connect the hard drive SSD SSD/HDD or mSATA.

    In the case of mSATA SSD drive, there is a special mSATA HOLDER that lets connect you the mSATA SSD to a 2.5 SATA controller ".

  • Update disk on Tecra Z40

    I want to buy Toshiba Tecra Z40-A1402 - 14 "- Core i7 4600U"
    This article has 128 GB SSD in this regard. Is it possible to install a regular hard drive on this ultrabook?
    Someone has an idea?

    Hello

    Is this the right specification of Tecra you want to buy?
    I see a 500 GB SATA HDD inside.

Maybe you are looking for

  • Graph XY lasso data points

    Hello. I am looking for a way to draw several XY cursors, then use a lasso (like paint or photoshop) tool to select a subset of the sliders. Lasso would allow the user to outline to draw a region with the mouse to select cursors within the lassoed ar

  • When trying to load the Yahoo Games it gives a yellow triangle with an exclamation mark.

    Original title: Yellow triangle with exclamation point. Have used the yahoo on my e-machine games regularly; now, when I go on the site and click on a game, I get a yellow triangle with a black exclamation point as well as the word is in the lower le

  • How use only one key USB to transfer 'easy' data once it's full.

    I try to do a Windows easy transfer to transfer all my files from my old PC with XP (17 GB) to my new one, which has Vista.  I am using a portable USB drive that can hold 8 GB.  After the first round of copy of the files on the disk, inserting in the

  • How to restore old files on my computer?

    How in the old files on my computer?  I have not backed up my computer, I used my original cd to restart my computer.  Not very computer and im afraid im going to this ruin once again.  I really need help looking for photos and videos of my grandchil

  • The kernel memory dump

    What is a kernel memory dump?