Tecra Z50 - A - 11 c: external display do not wake

Similar Questions

• Want K203TX: Display will not wake up

  This is a new laptop.

  I did nothing about it, other than updates of Windows install and create recovery discs.

  • I put the option "turn off the display of" 1 Minute.
  • IMPORTANT: I put the brightness screen completely to zero, the lowest setting possible, by using the keys on the keyboard or the brightness option in Windows.
  • Let the laptop computer idle for a minute, the screen can accommodate as it should (the laptop is put to sleep after 30 minutes, only display that sleeps, the laptop is still awake).
  • Move the mouse, press the keys on the keyboard, the screen doesn't come back to the top. The computer is still in place and in the course of execution-i can switch keyboard backlight On / Off with the keys, but the display will not wake up.
  • Press on the "brightness +" button on the keyboard, the screen wakes up. It is the only way to wake up. The other option is to press on and hold the power button, force a stop down and restart the computer.
  • This occurs ONLY when "brightess" is set to the lowest level. If the brightness is set to again one level above the lowest, the issue cannot be reproduced. Move the mouse or press any keyboard will wake up the screen in this situation.
  • The two graphics Intel HD 5500 and GTX 850 M drivers are up to date.
  • BIOS is updated as well.
  • Battery / sector makes a difference. If the display brightness to the lowest, the screen will ALWAYS fail to wake up, regardless of which power source is being used.

  What should I do? Please don't tell me this is a minor problem and I have to live with it.

  There are so many problems minor with this laptop, and all these add make a total piece of cr...

  My almost 5 years probook with a second generation core i3 processor and no discrete GPU is better than this all-new 5th generation core i7 + laptop GeForce GTX.

  I'm starting to regret this purchase. I should have gotten another probook. Thought that offers want a better "bang for the buck", and now I think it was a huge mistake.

  Anyway, no idea how I can get this fixed? Looks like a right driver problem? Or is this a hardware problem? Can we with a trial of mobile Envy this out and tell me if the problem can be reproduced on their platform? It cannot be reproduced on my Probook.

  Thank you.

  Hi @johnwinchester,

  I'm so glad to hear you're solves the problems you had! The key is that you are now without a problem.

  To answer 2 questions;

  1. to my knowledge, if you purchased the HP 3 year extended warranty on the spot with a cover against accidental damage, then it usually starts from the date of purchase. Be sure and check out I would suggest either go this site check your product warranty and/or contact us.

  2. I'd say creating new recovery disks. The old drive will not help to you on your product. You have the ability to create new disks of recovery of the product without any reported problems. I wouldn't take the chance, I just came out with the old and turned to the future.

  I hope this has helped!

  Have a great day!

• Tecra Z50 - A - Intel Rapid Storage Technology does not

  Dear Sir

  We bought a lot of laptops Toshiba Tecra Z50 - A with a hybrid HDD (with SSD cache).

  The exact model:
  TECRA Z50 - A
  PT544E-00D01TBT

  We staged and repartition laptops via SCCM.
  However, when you install all the drivers and the Intel Rapid Storage Technology software, I see that only rge WHAT HDD is used and no partition SSD with the Intel RST.

  How we enable this?
  The problem is that the performance is incredibly bad.
  Laptops are very slow, even if the specifications are good:
  CPU i5-4200U
  8 GB RAM
  Windows 7 x 64

  No idea how to turn this Intel RST?
  In the BIOS I find no option for RAID, as must be enabled for the RST to work.

  Thank you

  To be honest I n don't know what you mean exactly the RAID mode. There is no RAID mode.
  The laptop was equipped with a 500 GB SATA HDD HYBRID.

  The part of the HARD drive is used for writing, the SSD part for the reading of the data.
  The performance of SSHD can be placed between a HDD and SSD, but it s significantly slower than an SSD.

  If you have already installed the - Intel Rapid Storage Manager driver, then the service should work

  In the case where it does not run in the background, try to install the latest Intel RST page of Intel driver.

• Tecra A11 - utility to change device display does not work

  Hi all

  I have a problem frustrating with my * laptop Tecra A11 - 11J * (PTSE1E).

  I did a clean install of Windows XP Pro SP3 for x 86 (all updates/patches installed) and I can install a large number of drivers to get my hardware working, but * I can't get the display device change utility work *. I installed version 3.2.2 on the Toshiba site. I see that it installed under the Panel, software, but no entries in my Start Menu. When I press FN + F5, nothing happened. Also, I installed the rest of the software (i.e. common modules and Hotkey for display devices). But always impossible to duplicate my display via Fn + F5.

  When I take a quick glance at my display properties I can replicate my screen and/or extend my desktop!

  Any help is very appreciated. Thanks in advance!

  Best regards, Sjoemie1.

  Hello

  I'm pretty sure there must be something wrong with the installation order to here is just install so that Windows XP Home edition:

  Windows XP SP3
  Trusted Platform Module
  TOSHIBA Assist
  TOSHIBA security assist
  Chipset SW installation utility
  Toshiba Common modules
  ALPS Pointing Device Driver
  TouchPad utility On_Off
  TOSHIBA Mobile Extension
  180 degree TOSHIBA Rotation utility
  TOSHIBA Network Device ID registry tool
  Password TOSHIBA utility
  TOSHIBA utilities
  View TOSHIBA smooth
  Wireless keyboard shortcut
  TOSHIBA PC Diagnostic Tool
  Sleep USB TOSHIBA and service charges
  Intel Management Engine Interface
  Intel AMT software
  Display driver
  Intel Turbo Boost Technology driver
  Intel Rapid Storage Technology driver
  Realtek Audio Driver
  NVIDIA driver HD Audio
  LAN driver
  TOSHIBA controls
  O2Micro smart card reader driver
  Ricoh card reader
  Bluetooth Stack for Windows by Toshiba
  TOSHIBA software modem
  TOSHIBA Software Modem region Select utility
  Wireless LAN driver
  ConfigFree
  TOSHIBA HDD Protection
  TOSHIBA HDD_SSD alert
  TOSHIBA Hotkey Utility for display devices
  TOSHIBA screen utility unit of change
  TOSHIBA Power Saver
  TOSHIBA Web Camera Application
  AuthenTec fingerprint driver

  Please check and try to know what lack us.
  It is not easy to give you some good advice. What you did is right but...

• Pavilion G6 1006sh: HP Pavilion G6 1006sh external display does not work with Windows 8.1

  Hi all

  After you perform a clean installation of Windows Professional 8.1 on my Pavilion G6 1006sh I can't use my external Samsung monitor connected to the HDMI port.

  The windows installation is well unrolled without all the problems of the operating system had builtin readers for all devices. So there is no unknown hardware in Device Manager there is no sound, wifi, LAN, etc. In regards to the video card, I see two different devices. There is a generic VGA in Windows and there is an AMD Radeon HD 7400 installed M. The AMD Catalyst software has been installed successfully. In the graphic properties of windows that I can choose from two different outputs video, one is the general Windows VGA is the Radeon. However, windows detects monitor connected only on VGA General (i.e. integrated laptop display) and nothing on the Radeon so I can't use my external monitor.

  Of course, I tried to restart the laptop / monitor repeatedly, unplug / plug the HDMI cable but without success. When I plug the HDMI cable into the laptop the screen displays a message that it is connected, but there is no input signal. The HDMI port on monitor and works in the laptop I used the same setup with Windows 7 x 64 Professional without any problem. It is only the operating system that has changed.

  I tried to remove the General VGA device to force using Radeon, but after restarting it that nothing posted on the screen, I saw nothing on built-in or external monitor so I had to restore a previously saved system configuration.

  I tired to install the latest version of the graphics driver Radeon downloaded from the website of AMD, but crashed and restarted during the installation process of Windows.

  Please help me with this question or make a statement that this version of Windows is not supported on this machine and I must therefore go back to the old system.

  Configuration:

  model: HP Pavilion G6 1006 SH

  RAM: 2 x 4 GB

  OS: Windows 8.1 Professional x 64 (HUN)

  Drivers: installed and automatically updated by windows

  Antivirus: Symantec Endpoint Protection 12.1

  Thank you

  Zoltan

  Hi there @nzole

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you have installed Windows 8.1 on your system, but now you can not detect an external HDMI monitor. I'm happy to help you with this.

  First of all, in response to your question, this model is not supported for windows 8.1. It was sold only in the versions that have been configured for Windows 7.  That would mean there is no drivers especially customized by HP for this model for Windows 8.1.  It is possible that you could find a suitable drive for a model that Windows 8.1 which can be strong support enough in terms of hardware, that his driver might work, but there is no guarantee.

  Here is the support page for your model: HP Pavilion g6-1006sh Notebook PC

  Products HP - what happens if I do not see my operating system?

  Do you still have the recovery partitions, or you did a set of recovery discs, before installing Windows 8.1?

• Tecra Z50 - C - 12F M.2 SSD replacement not detected

  Hi all

  I just received a new Z50-C-12F and wanted to replace the 256GB SSD with a more wholesale (Samsung 950 Pro 512 GB m2)

  Unfortunately, the new SSD is not detected at startup, but I don't understand why.
  The original SSD is a Samsung MZ-NTY2560 (B & M-button) a new is a key of M, but this is the connector to the laptop.

  I tried to adjust the UEFI to MSC (default is UEFI (Legacy)) in the BIOS but even boot from a DVD of magic parted shows no signs of new SSD.

  TIA,

  Steve

  I tried a second new m2 (Samsung 950 Pro 512 GB m2) and still no sign of recognition.

  Any thoughts?

  Steve

• Qosmio F20 with Vista: display is not wake up from sleep/standby

  I hope someone can stop pulling my hair out - please!
  I have a Qosmio f20-136 that I upgraded to 2 GB of RAM. I managed to install Ultimate Visa on what actually works very well. I get a score of 3.4 Visa which means Aero works very well. The lowest score of void is actually the CPU (the 1.6 GHz Pentium M) with following 3D graphics to 3.9 with the Geforce Go 6600.

  However, I have an annoying problem.
  Hibernate works very well - he hibernates and returned very well. I have the power button set for the Hibernate now and also in the start menu power button.
  If I close the lid it goes to sleep and when I opened the lid it picks up perfectly. There is the sound of a device connection / disconnection when I open and close the lid.

  However, here's the problem. I would like to use the power button to sleep rather than hibernation and I don't want to wear and tear on the hinges of the screen by keep opening and closing the lid. So, I tried to set the power button to sleep and also tried selecting sleep in the start menu options. In both cases, the machine goes to sleep but then a problem when I try to resume.

  The powers of the machine upward but the screen is black. Everything is alive, but I don't see anything.
  If I unplug the power cable and plug again (which changes the brightness of the screen), then it comes to life. If I close and re - open the lid, it comes to life. Nothing else he raises.

  Some would say that I'm picky because I'm almost there with vista, but I dearly would solve this issue. Can anyone help please.

  Currently using the video driver 97.52. I installed the added G30 package (without the energy control) that works. FN buttons not working (although the multimedia keys - if anyone has a solution for that I wouldn't be thrilled!.) I tried support button for the G30 but does not work).

  Please help if you can.
  Concerning
  Jules

  Hello

  Try to install Nvidia Driver 156.72

  from there: -.

  http://www.laptopvideo2go.com/forum/index.php?showtopic=15580

  Good luck

• Tecra Z50 - need to connect two external monitors

  I think to buy Tecra Z50, but one of the features that I need is the ability to connect two external monitors.

  Is it possible to have a monitor connected to the HDMI and a VGA (with computer laptop lid closed)?

  * Hi-speed III Port Replicator is not an option, because it is not available in my country (Croatia).

  Hello

  I don t think you will be able to connect two external monitors to this laptop using HDMI and RGB port at the same time because of different types of signals.

  The RGB/VGA port supports analog signal.

  The HDMI port provides the digital video output and when the external monitor is connected to the HDMI port the device is set to HDMI.

  > * Hi-speed III port replicator is not an option because it is not available in my country (Croatia).
  What of the Dynadock? Its an external device connected to the s for computer laptop USB port.
  It supports own graphic unit and you can connect to another external monitor such Dynadock 2nd.

• Re: Tecra M5 - Windows 7 - external display problem

  Hello

  I have a Tecra M5 and now I decided to install windows 7 on it.
  Everything is ok except the external display output.
  Chosse the external display with shortcuts to windows 7 (w + P key) or Fn + F5, it does not work.
  The screen external ir well recognized, but there is no picture.
  The computer has the latest drivers from the toshiba support page.

  This experiment was done with resolutions and different monitors...

  Can you help me?

  Thank you
  Pedro Lisboa

  Hey Buddy,

  This means that your external display is recognized correctly in the menu display driver?
  Have you tried to extend or clone display in the display driver? Normally the external monitor should show a picture

  Have you checked if the other FN keys work? Maybe added package must be reinstalled to who controls the FN keys.

• Does not work on Tecra A2 - FN or key how to switch to the external display?

  Hello

  Tomorrow (Saturday 6) I have to show a little presentation my Tecra A2 on an external display or projector.
  After that I have to install my laptop for the second time last month, the Fn or function keys do not work.
  With this problem I don't know how to work with the external display.

  Please can you advice?
  Sorry for my English at low altitude.

  Buist huh
  The Netherlands

  @J.Verberk
  Sounds you're a newbie and you're talking nonsence
  You comment is simply not qualified.

  @Hein
  You said that you have installed you mobile again. Did you use the Tosh recovery CD?
  If this isn't the case, I think this might be a reason for the FN key anomaly.
  After recovery use the laptop must switch with FN + F5 external peripheral connected to the laptop.
  If you use try beamer to turn the trap settings.

• Tecra S2 cannot switch to the external display

  With my Tecra S2 and when it is docked in the Port Replicator APR - III, I used to be able to connect my external (via DVI) display so that it was to automatically screen output to we by default, not only to the windows startup screen (Yes, I noticed the topic on the forum at the start of windows) but also when display login screen and beyond.

  Only problem now is that there is no more than anything, she now only sends the output to the external display when starting and then switches back to the computer screen displaying the screen Windows login and when you are connected to Windows.
  Also after commissioning and connection, FN + F5 does not at all, even when you switch to DVI, display does not illuminate.

  I feel that either the nVidia properties settings (double screen, unique, etc.) or the Mobile Extension Manager have something to do with it.
  Anyone who knows the answer / solution to this problem?
  Experts on the Mobile Extension Manager or several monitor in nVidia settings with of Toshiba Tecra?

  Thank you

  Arjen

  Hello

  Well, as I know it is not possible to set the external monitor as a default monitor.
  I use a Satellite phone and sometimes I plug it into the external monitor and use the extended desktop option.
  During notebook startup procedure the windows boot image will appear on the second screen, but the user name and the operating system appears on the screen of the laptop.
  I think you can use the external monitor but you can't set it as a default monitor and you can use it if the operating system has been released.

• What is the best external display for use with Tecra A8?

  It is perhaps off of a question, but I'm in the market for an external monitor for my Tecra A8. The price range of 400 euro round. Any suggestions?

  Hello

  What size of monitor you want bye? 17TO? or 19a?
  I read checked the product on some websites and the Samsung SyncMaster 970 19a testing? is not a bad choice. You should get to 400Euros.

  But it's usually? not easy to say which screen is best. I think you should visit some computer dealers and compare external displays. You know that you can check the clarity, brightness, contrast and response time. CA? It's important if you want to play games. It should support a low value. For example 8-6 ms

• Tecra Z50-A-181-built in microphone not working/not found

  Hello!

  I recently bought for laptop Toshiba Tecra Z50-A-181 supplied with Windows 7 64 bit (have 8.1, too but never installed it).

  Anyway, once I started using it, I discovered that the microphone is not functional or not recognized at all.
  So, what happens is that, once that I plug my headphones into the audio handset Jack / micro, whoever I'm talking (on Skype, for example) to stop to hear me (and my camera is on).

  I tried several things mentioned in other topics, however, the problem does not turn off. In addition, there is no driver for the camera or the bed at the microphone, or whatever.

  In Device Manager there is no extra, unrecognized device and in sound recording options /, no other microphone to use appears.

  I will appreciate if someone can help.
  Thank you in advance!

  You have a problem using an external microphone?
  Your laptop is preinstalled with original image of recovery for all the necessary drivers must be installed.

  You can use internal mic? It should be listed under recording devices.

• Tecra Z50 - A - 11 c: without capital letters when shift caps lock is enabled

  Hello

  I have a laptop Toshiba Tecra Z50 - A - 11 c with 3.70 BIOS...

  I noticed a strange problem with my laptop. Occasionally, when the CAPS LOCK is turned on, I can not write in capital letters when it is off, I can write in capital letters. I couldn't find the thing to replicate.

  Is there someone with a similar problem?
  What could be the problem?

  Thank you.

  The keyboard should work as follows:

  SHIFT CAPS LOCK is enabled-> uppercase
  SHIFT CAPS LOCK is on and down SHIFT-> small initial letters
  SHIFT key-> uppercase

  If this isn't the case, test the external USB keyboard.
  The use of the external USB keyboard can be useful to find out if the internal keyboard is malfunctioning.

• Billboards on Tecra Z50 - has

  Hello

  does anyone know if the Billboard in the A-h-less expensive Tecra Z50 13 is the same as in those prices higher as the A - 12 K (so a slab IPS)?

  For me and colleagues good vertical view angles are really important.

  Hello

  The Tecra Z50 A-h-13 was equipped with an IPS TFT Color LCD (not CSV) 15.6 display "(Full HD 1920 x 1080) LED window."

  The same view was built in Tecra Z50 - A - 12 K as well as in other Z50 - A Tecra models.