Telnet does not not windows 7 64 bit

Original title - question of Telnet for Windows 7 64 bit

How to enable Telnet from a command prompt window that I could make with Vista 32 bit and earlier versions of Windows NT4 to.  With 64 bit Win7 I've been able to start Telnet to run in the Start Menu, which is a real pain.  In addition, how to configure the substitution here control?  In the past it has always been control-] but that doesn't seem to work now and I can't find the configuration for this option.  Thank you.

Harvey

O.K.  This time, I REALLY found the problem.  It was the command-line interpreter I use JPSoft TCC.  It is necessary to disable the Win64 file system Redirection.  Everything works now.  Thank you!!!

Harvey

Tags: Windows

Similar Questions

  • Epson 830 xp print driver does not (Windows 7-32 bit)

    Last week, I bought a new printer multifunction Epson XP-830.  I have used Epson before without problem.  Can't get the driver to load.  Has been able to load the scanner software.  Driver is not displayed.  I think that the computer sees the right printer cannot find a driver that loads.  I loaded the driver for the Epson web site.  The drive, they sent me will not read in my drive.  I spent a lot of time on the phone with Epson troubleshooting - in the end, he said to call Microsoft... I feel I'll send this printer back.  I have disable check verification in the wind, it was an unsigned driver.  When I ran windows update - the 830 do not show upward well that several other models of xp has.  There was a generic of the 800 series and I tried this - it loaded - but it did not work.  Very frustrated.

    Sharon

    The symptoms you describe its pretty strange.  You may be correct that the unit you received is defective.

    Recently, I have not run Windows Update to update the list of printer drivers on my Win 7 system, so I do not have drivers from the Epson XP series on this system.  However, looking at the Windows Update Catalog indicates you're right: there are drivers there for XP - 800 series, XP-810 series and XP-850 series printers (as well as upper and lower XP series), but not XP-830.  Here is what I expected appear in the list of drivers when you use the "Add a printer" Wizard after running Windows Update.

    However, Epson has an available for download driver for XP-830.  Have you downloaded the printer driver or you downloaded the "drivers and utilities Combo Package Installer?

    For Windows 7 32-bit, you downloaded epson16387.exe (combo package installer) or epson16463.exe (driver only).  What file did you, in fact, download?

    Also bizarre is your statement that ' the disk they sent me won't play in my player. "

    • Wasn't there a CD supplied with the printer?  If there was, what happened when you tried to use it?
    • What exactly happens when you insert the CD they you sent in your drive?

    The first time you tried to install the printer, if using the CD supplied with your printer or otherwise, did you make sure that the printer was NOT connected to the computer until the next DAY, the software has been installed?

    At this point, you have all the printers installed on this computer?  In other words, if you click on the round to start and go to devices and printers, which icons appear, in the category 'Printers and faxes' or in the category "not specified"?

  • The proxy server does not-Windows Internet Explorer

    After completing the windows updates, I started getting the following message every time I tried to enter in IE10: the proxy server does not-Windows Internet Explorer.

    1. try changing the proxy server settings in Internet Options > connections > LAN settings.  All the options are greyed out, cannot be changed.

    2. I checked that I am an administrator on the computer user.

    3. get the same error message, both wired and wireless configurations in.

    4. do you have a restore point at an earlier date - the same error.

    5A attempted to use Firefox 15.0.1 and I get the error message: the proxy server refuses connections

    My system:

    Acer

    AOD255

    Intel (r) CPU Atom N550 1.50 GHz 1.50 GHz

    1.00 GB OF RAM

    32-bit operating system

    Windows 7 Starter

    Service Pack 1

    Hello.. Please try following method to solve your problem.

    Tools-> Internet options and click the Advanced tab, and then tap on restore avancΘs to restore the default settings of Microsoft internet explore.

    If you still have problem

    go to tools-> internet Options-> Advanced-> Reset internet explore settings click on the Reset button.

  • A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

    A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

    I can't believe it.

    When I start up a virtual computer, it gives a wrong message shown in the picture below.

    Does anyone have any ideas on this?

    Usually not enabled virtualization technology in host BIOS.

    Take a look at can not power on a 64-bit Windows VM

  • "Your operating system does not support the 64-bit version of Silverlight" when you try to install Silverlight on your computer.

    Original title: Silverlight problem

    OK, so something was wrong when I was watching Netflix and I had to uninstall Silverlight. When I tried to reinstall it, it says "your operating system does not support the 64-bit version of Silverlight". I have a 64-bit version of Vista and I use Chrome. Can anyone help? I don't want to lose to Netflix.

    OK, so something was wrong when I was watching Netflix and I had to uninstall Silverlight. When I tried to reinstall it, it says "your operating system does not support the 64-bit version of Silverlight". I have a 64-bit version of Vista and I use Chrome. Can anyone help? I don't want to lose to Netflix.

    Clean installation of silverlight and reinstall...

    How to clean a facility damaged Silverlight and then reinstall Silverlight

  • I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight.

    Silverlight installation problems

    I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight. I have Vista Ultimate, a 64-bit system.  Help, please.

    Hello

    It's the operating system Vista Installation Forum.

    Microsoft has set up Forums to specifically to questions of Silverlight.

    They should be able to help you there.

    http://forums.Silverlight.NET/

    See you soon.

  • Bought Windows 64 bits but hotel does not work on 64-bit

    I needed a 32-bit Windows 7 for my client of the hotel lock software installation, unfortunately, HP distributor misled me into buying 64-bit instead of 32 bit.
    The software does not run on the 64-bit and 32-bit and the Distributor is unwilling to change the system for me.
    What should I do to install this driver on the 64-bit or change the 64 bit to 32 bit?
    Thank you

    If you install virtual Windows XP, you can install your software in this environment, virtualwinxp emule Windows XP 32-bit

  • Acrobat 8 Pro ' Check for Updates ' does not not (Windows 7, 64-bit)

    I have Acrobat 8 Pro installed on my Windows 7 (64 bit) system; specifically v8.1.3. When you try to use the feature of ' Check for Updates ' application, Adobe Updater displays the following message: "no Internet connection found.  Please check your Internet settings or firewall. »

    I do not encounter this error if you use the "Update" functionality with other applications such as Photoshop Adobe elements & Reader.  I have an internet connection.

    I installed on my laptop Vista Acrobat 8 Pro and the feature "Check for Updates" works as expected.

    All the words of wisdom on why I encounter this problem on my Windows 7 system and/or how to fix it?  Thanks in advance.

    Problem has been resolved (the solution in a post on the forum of the Adobe Web site):

    CONTROL PANEL > NETWORK CONNECTIONS >

    Windows "gave me" a "Wireless Network Connection 3" that has been identified as a "Microsoft Virtual WiFi Miniport Adapter"

    I clicked it and chose to "disable."

    Once the 'virtual' card has been deactivated, my Adobe Acrobat Update Manager launch worked well.  I've seen this problem on Windows 7; never lived with my XP or Vista systems.

  • Windows 8 x 64 overview does not load in 64-bit mode vm Workstation 9

    I can't get vmware workstation 9 load windows 8 x 64 iso image in 64-bit mode.   It comes to getting the error message:windows8_x64_preview_error.jpg

    How can I solve this problem?  I think I activated the VT in my BIOS, but I'm not entirely sure.  HP Elitebook 8560w Windows 7 Professional 64 bit

    I think I activated the VT in my BIOS, but I'm not entirely sure

    'VT - x' as well as 'Execute Disable Bit' must be enabled in the BIOS to start Windows 8 64-bit as a virtual machine. Please double check the BIOS settings and make sure that the power cycle the system after you changed these settings!

    Unless you need "Trusted Execution", you can also consider to disable in the BIOS.

    André

  • I have Ellis Mega Bible Library 6 version which ran on 32-bit, but does not load on 64-bit.

    This program does not load and the message that I said that I must have 32-bit system. I have 64. All solutions?

    Hello

    Please see the link below for results of compatibility:

    http://Windows.Microsoft.com/en-AU/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

    Also, check the link below for more information.

    http://Windows.Microsoft.com/en-us/Windows7/understanding-hardware-and-software-for-64-bit-Windows

    Hope the helps of information.

  • Does not, how I update BITS?

    I reinstalled IE8, after which the Windows updates did not work and I got error 0 x 80070424. (XP SP3)

    I have re installed SP3, but this does not solve it.

    I tried the FIXIT suggested by David Vinod

    (http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/updates-continue-to-pop-up-but-cannot-download-no/73ccc5a1-64c1-4ffe-90be-32e4c7c93bbd)

    but this is a no cure.

    My latest updates have been in November 2012, nothing since. Any ideas how to fix?

    This Microsoft hotfix fix 50687 allowed me to download the updates, but they wouldn't install.

    (BITS is re appeared under Services)

    Microsoft Update does not store my update history, so he re scan each visit.

    These were not installed:

    Update for Windows XP (KB946648) security
    Update security for Windows XP (KB2510531)
    Microsoft Office Compatibility Pack Service Pack 3 (SP3)
    Update security for Windows XP (KB2758857)
    Update security for Windows XP (KB2770660)
    Update for Windows XP (KB2779562)
    Update security for Windows XP (KB2753842)
    Update for Windows XP and Windows Server 2003 (KB2798897)
    Update security for Windows XP (KB2802968)
    Update security for Windows XP (KB2780091)
    Update security for Windows XP (KB2807986)
    Update security for Windows XP (KB2820917)
    Update security for Windows XP (KB2813170)
    Update security for Windows XP (KB2813345)
    A security update cumulative for Internet Explorer 8 for Windows XP (KB2817183)
    Update security for Windows XP (KB2808735)
    Windows Malicious Software Removal Tool - April 2013 (KB890830)

    Ko 2757638, which I installed it manually, has not been downloaded or installed.

    I downloaded and run Microsoft Fix It Center (21 patches) and this explains that the problem has been corrected. WELL WELL, IT IS FALSE. The problem persists.

    But the power down of all installed updates then maybe it's fixed. I'll report later.

    Hi, pawn,

    Please restore the computer and when you receive the prompt to install the nvidia update, please hide and it woun't install. Here are the steps:
     
    To hide updates:
     
    (a) click Start, type: Windows Update in run
    (b) press on enter on your keyboard
    (c) a list of the updates
    (d) right-click in the update/s in question and click Hide.
     
    Update the adapter driver video directly from the Nvidia site.
    Let us know the result. If the problem is still not resolved, we will be happy to help you further.
  • Windows Search service does not (Windows 7)

    I am running Windows 7 64 bit.
    Whenever I try to search that I am asked to turn on indexing, and I do.
    Because it is a recurring event, I studied further in indexing options.
    Indexing options said "indexing does not work" and and only allows me to enter the advanced options.
    Automatic troubleshooting futher gives me error measage "Windows Search service does not..." "Not fixed".
    I checked the services and tried to force start this service and get "error 3: the system cannot find the path specified."

    Can someone help me with this service?

    Security of Windows 7 is a PIA and what my problem was. "Indexing does not' and my inability to start theWindows Search service has persisted despite all these tips above and much more.

    When I went to C:\ProgramData\Microsoft\Search\Data and took possession of it (http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/), I was able to restart the Windows Searchservice. Subsequently, indexing ran and worked.

    We need the value of the securities of the ProgramData (C:\ProgramData) directory in order to stop this _ to interfere with the installation of programs and, often, the execution of programs and services. Right-click on C:\ProgramData and select Security, then the set of permissions to allow all permissions (http://www.blogsdna.com/2159/how-to-take-ownership-grant-permissions-to-access-files-folder-in-windows-7.htm) and the problem disappeared. (Note C:\ must be path of your window or use your default root.)

    Thank you Microsoft Support for your irrational, frustrating security measures and the fact that your support team has no idea. You have not been able to write a user friendly OS from XP and probably since MSDOS. Too bad I hate Apple more than you.

    6 hours of BS to understand this.

    I hope it works for you.

  • USB 3.0 does not, Windows cannot find drivers

    Hello

    I recently got a Buffalo Drive Station axis speed HD-LXU3. I plugged in a USB 3.0 port as suggested, and Windows did not. So I tried some things and ended up plug it into a USB 2.0 port, after which he started to work very well. I also have a webcam connected to a USB 3.0 port, which the computer does not exist. So I went into Device Manager and it shows two USB controllers that not have installed the drivers. I clicked on "update drivers" and Windows have searched, but found none. I tried looking for drivers on websites (manufacturers of motherboard and processor) Biostar and AMD, but failed to find the right one. Could someone help?

    Danny

    P. S.

    Moterboard: Biostar Hi-Fi A85W

    Processor: AMD A8 - 5600K APU

    OS: Windows 7 64-bit

    I fixed the problem by reinstalling the software AMD Catalyst by selecting the option USB 3.0.

  • "" File to error message "does not contain a 32-bit software" what xerox workcentre pe220 installation' pilot

    Original title: xerox workcentre pe220'drive does not work

    I need help. I downloaded xerox workcentre pe220' 32-bit disk. When I try to install, it's been declined (Advisor: folder does not contain software for 32-bit)

    I use windows 7 ultimate 32 bit.

    Could you help me?

    Thank you

    Liana Almeida

    my email: * e-mail address is removed from the privacy *.

    or * address email is removed from the privacy *.

    Hello

    Follow the steps below and check.

    a: Right-click the installation file.

    b: then select run as administrator.

    Hope this information helps.

  • The Task Manager does not (Windows 8)

    Recently got my ASUS Windows 8 and for some reason any my task manager does not work at all. I have Avast and I ran a bunch of virus scans but nothing. Now it was working fine a few days ago, that I have no idea what continues to everything and I'm just a bit of new features in Windows. When using the commands to open the taskbar, it does not open but the icon appears at the bottom. I click on the taskbar icon and nothing appears at all the... When I move my mouse over the taskbar button I can see, but it will not appear. It's like he is completely invisible now and I can see it is more more.  I have no idea what to do and I tried clicking and running as administrator but still it even will not open I'm out of ideas.

    Hi Anthony,.

    Thanks for posting your question on the Microsoft Community forum.

    We understand that you aren't able to open the taskbar. We appreciate the steps of troubleshooting that you tried it on the computer. We would be happy to help you. This could cause because of system files corrupted on your computer.
     
    1. Since when are you facing this problem?
    2. don't you make changes to the computer?

    Try the following methods:

    Method 1:

    -Press on the Windows key + R

    -Type taskmgr

    Check if you are able to access Task Manager

    Method 2:

    -Press Ctrl + SHIFT + ESC key

    Check if you are able to access Task Manager

     

    Method 3:

    Run the Microsoft safety scanner.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Use the System File Checker tool to repair missing or corrupted system files

    Refer (to repair manually corrupted files, see the details of the File Checker process system to find the corrupted file and then manually replace the corrupted file with a known good copy of the file)

    http://support.Microsoft.com/kb/929833

    Reply with the results.

Maybe you are looking for