Temperature of the GPU on Satellite P100-102

Similar Questions

• High temperature of the GPU on Satellite P100-108

  Hello

  Since 2 weeks ago I noticed that my GPU temperature goes up to 82 degrees. Everything to the left of the laptop gets hot after a few hours.
  I remember that a fan used to put on when obtained temperatures high, but lately I don't hear it. HARD drive and CPU temperatures are normal.

  If linux is used with acpi disabled, then a fan runs all the time and temperature of the GPU is around 50 degrees. I don't know what fan making all that noise, it could be the fan of the CPU or GPU maybe.

  So, I'm not sure if it windows or hardware failure. Any ideas?

  model: p100-108, last of the drivers installed
  Windows XP
  Everest used to measure temperatures

  Hello

  Is perhaps a problem with the fan. Please check this box.

  By

• Satellite A500 - problems with the temperature of the GPU

  The thing is playing Age of Empires online I started having problems with the temperature of the GPU. When you run the AIDA64 the CPU stress test can hold up well, but after 35 minutes the test what AIDA suspended while the GPU fan can't seem to download their revolutions, (I guess that if there was that a rise in temperature would increase the speed of rotation of the fan, don't).

  I consulted the manufacturer of the GPU, nVidia, (the graphic is nVidia GeForce GT 230 M) and tell me to contact Toshiba for other options, since, according to them, the problem is not the GPU.

  Any ideas or suggestions?

  You use your laptop to factory settings?
  Have you installed something that may be responsible for this (non-Toshiba display driver)?

• Satellite P100-102 without digital-video output TFT-connection-Port?

  Hello

  We do not understand why mobile phones latest, as the Satellite P100-102 would be produced without digital-port connect TFT´s...

  On the market-enduser TFTs are popular, but it is not possible to use the digital interface with the portable toshiba. We are not interested in the purchase of laptops from other manufacturers, but our time flee.

  Can you give us a tip, then of the next generation Satellites with digital output to connect TFTs will reach the market?

  Best regards
  Sascha

  Hello

  Sorry, but I disagree with you.
  Toshiba designs laptops that support the digital port (D-video output port)
  Check for example the Qosmio of E, F, G series.

• Replacement of the GPU on Satellite A210

  Is it possible to replace the GPU in Satellite A210?

  As a little faster plugged PCIexpress for example?

  Hello

  What do you do exactly?
  You want to remove the VGA card only or you want to upgrade the GPU with another?

  I think the GPU are removable (means not fixed/welded) but it of not possible to update the graphics card of laptop s. The BIOS would not support another graphics card.

• Is the card in Satellite P100-437 reader also supports format SD HC?

  Hi all

  not sure if the card in Satellite P100-437 reader supports also format SD high capacity?

  Thank you.
  Kind regards
  teo_ost

  Post edited by: teo_ost

  Hello

  Please check this thread for your question:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=99339𘐋

  Welcome and good weekend

• Order WMI - what command can I use to get the temperature of the GPU?

  Which command can I use to get the temperature of the GPU in WMI?

  Hi Daniel_99,

  ·         Do you use some kind of scripts?

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP forum.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

   

  I hope this helps.

• Temperature of the GPU 103C on Latitude E6420

  Hi, I recently started the Test PassMark Burn-In version 7 on my i7-2630QM Latitude E6420 with Nvida NVS 4200 M 512 M card. During the test, I noticed that the temperature of the GPU is about 103C and software reported "Test failure" due to the high temperature.

  The temperature of the CPU is also high, around 93 C.

  Is this normal? I would return this laptop?

  Thank you

  It is a known problem with the E6420 14 "laptop and the Quad core CPU. I have an E6420 and E6520. The E6520 manages the heat much better and higher out of GPU and 95 c 85 CPU when you run Diablo 3 for an hour on the resolution max and max graphics settings.   My laptop comes with the heatpipe heatsink only, he would downclock the CPU because of excessive heat and same judgment. After I got the radiator double pipe with a new thermal pad, my time is up to 100 ° C max on CPU and GPU and cell phone stops is more due to overheating.

  The problem is Dell packed plenty of power in a computer 14 "laptop. When running at load max, the cooling system can not just keep it up. Dell should really fix this, but you can do some improvements on your end. FYI - don't try if you are not comfortable to do this or are tech / mechanical savvy.

  Here's what I recommend:

  1 make sure you have the latest version of the BIOS installed. Dell changed the thermal curves for the fan of the bios updates.

  2 make sure you have the radiator HEATPIPE DUAL DELL P/N - TYP01. My E6420 comes with heatsink tube bad in the photo below.

  One pipe radiator - ONLY for the DUAL CORE i5, i7. NOT FOR i7 QM QUAD CORES.

  Forum.NotebookReview.com/.../564579-E6420-Owners-thread-83.html

  There is a "gap" between the radiator and the Nvidia NVS 4200 M GPU. Dell uses a NOTE from the ADMIN: profanity removed according to the TOU > heat transfer heat pad. many users have done the following to reduce even lower time by replacing the thermal pad with a wedge of copper sandwiched between two layers of thermal paste / compound. I don't know that Dell probably does not support below this mod even if users have reported the lowest time after the mod which stresses in turn of components less.

  3 order the copper shim kit. www.eBay.com/.../260718120394

  4. use a good thermal paste / made up for example ceramics 2: www.newegg.com/.../Product.aspx

  Finally - browse the forums on this site because there is a lot of information on your E6420.

  Forum.NotebookReview.com/.../564579-E6420-Owners-thread-95.html

  E6420

  I7-2760QM turbo up to 3.5 ghz

  16GB DDR3 @1600 MHZ - Yes the E6420 and E6520 will accept 16 GB and run at 1600 MHZ if you buy 1600 Mhz Ram AND have a Quad core CPU RAM supports 1600 Mhz in native mode. You can search your cpu here and look under 'types of memory' for the speeds supported. "The memory of max size" for memory max your CPU is compatible.

  ark.intel.com/.../Intel-Core-i7-2760QM-Processor-(6M-Cache-2_40-GHz)

  500 GB HARD DRIVE AT 7200 RPM

  1600 x 900 HD display webcam w

  Keyboard backlight

  Intel 6250 WiFi

• Satellite P100-102 works badly since the installation of Vista

  Hello!

  I installed Windows Vista on my Toshiba p100-102 (A3E) but I had a 'small' problem. In each 3D app, I had a lot of shifts and slowdowns. I think it's a problem with the graphics card and I think the grapics card fan works slow since installing vista. Thus it reduces the mhz for a few moments (1 minute at) (I think, I'm not shure)

  so... anyone have any idea what I can do? Maybe should I use an alternativ graphics driver?

  SRY for my bad English = /.

  Oxford

  Hello

  did you properly installed all the drivers for your system? It s absoulutely necessary that everything is correctly installed and configured.
  Another thing is: Joanie to install the latest version of the bios, because I had a problem with my Satellite A100 after installation of Vista and I was able to solve it with my bios update.

  Regarding the graphics drivers, I can give you some links that might help you with your performance problems:

  http://www.laptopvideo2go.com/
  http://www.OmegaDrivers.NET/

  Try these links and you will find drivers for your VGA. And please look carefully, a lot of people I have given the link tell me that they don t find anything, but the drivers are there.

  Welcome them

• Satellite A100 - I have a negative temperature of the GPU

  Satellite A100
  Negative temperature - 99 of the GPU. NVIDIA go 7600 card.
  Is this supposed to be?

  Hello

  I put t know how you get this value of the temperature, but I guess you used the 3rd party applications that are not certified by Toshiba and I doubt that these tools would provide a good temperature.

  And to be honest, I never heard a negative (less) temperature. For me that's nonsense

• GPU on Satellite P100-217 fan never turns on running Linux Gentoo

  Hello

  I am running Linux (Gentoo) on my P100-217 (Geforce 7600). The graphic card fan never turns on, and the GPU gets to a temperature higher than 100 ° C when executing some 3d games. When I boot to windows, the graphics fan does not turn and the GPU is much cooler, running the same games.

  Can someone Toshiba please give me some information on how to solve this problem under Linux.

  Here is some additional information:
  Driver version: 1.0.9755
  nvclock version: 0.80.
  Nvclock message: you the fanspeed adjustment only is not supported on your video card type

  Thank you

  Chris

  Hello

  I'm not Toshiba, but maybe I can help you too.

  Type in the console:

  detection sensors

  and follow the instructions. Maybe you need to compile some kernel modules yourself.

• Replacement of GPU on Satellite P100-216

  I joined this forum on behalf of my brother who lives in Turkey. He took with him to England a Satellite P100-216 laptop.
  He had problems with him and he took to a workshop in Turkey to tell the graphics card needs to be replaced and the installer had problems to make a. He suggested to one of the United Kingdom and next time someone visits, they can take the card to the Turkey. I live in England and also told me of a repair shop here that the card is integrated on the motherboard, and it cannot be replaced, it s not worth repair.

  Could someone advise me if this is the case. If it s not integrated, y at - it another card that would fit. It only play hidden object games, so I doubt that he would need a top spec.
  Any information would be very useful and I thank in advance for the help

  Hi dude

  You shouldn't be disappointed. The forum is a user to user forum.
  If others think they might be able to help then they will post here in this thread.

  > I live in the United Kingdom and also told me of a repair shop here that the card is integrated on the motherboard, and it cannot be replaced, it s not worth repair.

  That s right the GPU is a part of the mobo and if the GPU would be defective, then you need to replace the motherboard. But the new motherboard is not cheap, so maybe better to buy a second hand laptop before getting the mobo replaced.

  PS: as you can see that it is a user to user forum... maybe other users expect a notice from you too as you did too, so to be part of the community and try to help others also...

  Welcomes :) and welcome to our community

• How can I change/turn off the led under the speakers on Satellite P100?

  How can I change/turn off the led under the speakers? (in Satellite P100 (PSPA6E))
  Now I see the light only in the left side, but when I bought the computer left and right led line lights blue under the speakers.

  Gazz's right. It is not possible to switch off the LEDs. If just one LED is on the other must be faulty. Contact the customer Service of your country partner. I'm sure they can disconnect one too if you n t need her.

• How to turn off the blue lights under the speakers on Satellite P100?

  Does anyone know how to turn off the blue lights that lie beneath the speakers on a Satellite P100? They are evil in my sight!

  Thank you, John.

  Hello

  You are a lucky man. This is a very new unit and I wish that I would also have one of the new Satellite models. But you know, the money is the key :(
  However, I don't think that it is possible to put out these fires.
  In my opinion, it is a part of the design of laptops. It seems very futuristically.

• Strange noise coming from the fan on Satellite P100

  My Satellite P100 just makes a noise like a seriously heavy drill. Nothing else happened significantly so I turned off immediately and left for an hour or so overheating had the broken fan.
  Now back on and everything seems fine, but I'm worried. Is there something that can explain this? I got 5 interviews next week for which I use the laptop to prepare a presentation and I do not want to fail on me at the last minute...

  Any help much appreciated.

  Hello

  that could be an object (something really little) is/was blocked in your FAN and is now gone. If this would be a problem of turnover so the fan would still some strange noises.

  I suggest you do the following: use your machine as usual and if noise appears again then ask a technician to clean the fan/ventilation system. I Don t think it s some malfunction of the equipment.

  Good bye