temporarily, Windows 7 freezes and shows icon treatment

Similar Questions

• If my connection interrupted by the ISP, my connection broadband (PPPoE) on my windows 7 freeze and it does not cut, and he does not answer to disconnect click.

  If my ADSL connection disconnected by the provider of the connection on my computer freezes instead of disconnect!

  As the title suggests, if my connection interrupted by the ISP (for example: Internet service provider who use dynamic IP automatically disconnects after 24 hours permanent connection), my connection broadband (PPPoE) on my windows 7 freeze and it does not cut, and this isn't answer to disconnect click, even if I uninstall the Ethernet card, keep the connection.

  Everything else works fine, and the only way to connect to the Internet is to restart my pc.

  Also if the connection is disconnected due to a traction cable or ADSL Modem power connection broadband (PPPoE) on my PC disconnect normally without any problems and I can reconnect without any problem.
  any help with this.

  Hello

  PPPOE software th whole arrangement never worked well from the first day more than 10 years regardless of the operating system.

  So most serious DSL carriers actually give free Modem/Router so that authentication would be by the side of the router WAN.

  They give it for free for phone support for this problem cost them more than the $10 adds the router to the Modem

  For example, get a router, simple routers in the United States are sold for less than $15.

  Router solved the problem PPPOE provides, security with NAT firewall, and stream DSL is actually faster than with authentication of software.

• Windows 8 freezes and gives the Blue error screen every hour approximately

  Hello guys. I have a problem with my system: windows 8 freezes and gives the Blue error screen every hour or more. usually it freezes, displays a blue error screen (clock watchdog timeout knode or not handled exception or something on a system request), I force restart it, and then it happens again (sometimes 3 - 4 times in a row, then it will be fine for another time). Here is the link to my dump leader : https://www.dropbox.com/s/uv27xr54esjlen0/MEMORY.DMP?dl... . The machine I built myself: amd fx 8350, card mother m5a97, dvd - r, 1 ssd, 1 hdd, PSU 500w, gtx 650 ti video. Also, here is a report of CPU monitor ID: https://www.dropbox.com/s/k1ma0m6maap404q/HWMonitor.txt... . I have already done all the windows, direct x updates and drivers and ran ideas
  If anyone has advice like how to do to solve this problem, please help me because I'm going crazy.

  Thank you.

  AS

  DMP file is corrupted and useless.  Please reconfigure your system for dmp files small as described in this wiki

  
  
  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

  Please provide us with your administrative Event Viewer logs by following these steps:

  Press Win + 'R' and type eventvwr > enter

  Expand custom views
  Click the administrative events
  Right-click Administrative events
  Record all events in custom view as...
  Save them to a folder where you will remember which folder and save it as Errors.evtx
  Go where you saved Errors.evtx
  Make a right click Errors.evtx-> send to compressed (zipped) folder of->
  Download the .zip for Onedrive or a file sharing service file and link to it in your next post

  *

  If you have updated to win 8.1 and you get the error message " " " the system cannot find the specified file" it is a known problem.  The work around is to change the registry.  If you are not comfortable doing this DON'T.  If you are, save the key before making

  Press Win + 'R' and enter regedit

  
  Navigate to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/analytical.

  
  

• temporarily, the computer freezes and buzzes then restarts then simultaneously using spider solitaire and play itunes worked fine util is about 2 weeks.

  Fix a computer temporarily freezes and buzzes, then restarts when simultaneously using spider solitaire and playing itunes worked fine util is about 2 weeks. Dell vostro, windows 7, office 10, itunes 10.6.3

  Help!

  Hello

  1 done only if you use iTunes and solitaire spider together?

  2 have you made any changes to the computer before the show?

  Method 1: Uninstall and reinstall ITunes and see if this is useful:

   

  Reference:

  Uninstall or change a program:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

   

  Method 2:  Put the computer in a clean boot state and see if that helps.

  A clean boot to test if any element of service or third party application startup is causing this issue.

  Reference:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

   

  Method 3: Restore the computer to a date when it was working fine before.

  Reference:

  System Restore: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• Windows 7 freezes and unresponsive

  A few days ago did this start happening, but my laptop freezes and nothing works.  I can't open the windows, all my open windows have the title [name of program] is not responding.  CTRL Alt Delete sent it to me to a page saying:

  "Task manager has failed to operate, and if you feel this once again, then your operating system can be unresponsive."

  Or something similar to this.

  Return to normal, the only way is to press the power button until it turns off and then turn it back on.  It happens all the time now, but I've had this laptop for a few years, and it did not before.  I had to reformat the computer twice recently, due to a virus which plays audio sounds random and commercial without my intervention.  One of these wipes was right this morning, so if you ask my logs, they will be completely empty.  It comes to the computer:

  http://support.gateway.com/s/notebook/2010/gateway/NV/NV55C/nv55cnv.shtml

  If anyone knows what the problem is or how to fix this, I would greatly appreciate it if they responded.

  Thank you

  Jackson

  Hi Jackson,

  Follow the steps mentioned below:

  Method 1:

  I suggest you to start the computer in safe mode. If the computer boots to the office in safe mode, then try to start the calculation to a clean boot.

  Step 1:

  See the link to start in safe mode.

  Startup options (including safe mode).

  http://Windows.Microsoft.com/en-in/Windows7/advanced-startup-options-including-safe-mode

   

  Step 2:

  If your computer starts on the desktop in safe mode, I suggest you perform the clean boot.

  See the link to perform the clean boot.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8.

  http://support.Microsoft.com/kb/929135

  Note:

  After the clean boot, start the computer in normal mode.

  Follow the steps to start the computer in normal mode.

  a. click Start, type msconfig.exe in the Start Search box and press ENTER. If you are prompted for an administrator password or for confirmation, you must type the password or click continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click restart.

   

   

  Additional information:

  Crashes Windows or freezes

  http://support.Microsoft.com/kb/2681286/en-us

  Anti Virus Disclaimer : The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-in/Windows7/ways-to-improve-your-computers-performance

  I hope this helps to solve the problem. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Windows update fails and shows code error 80070490

  Hello, I have Windows Vista Home Premium, 32-bit operating system and installed Service Pack 2.

  I set Windows to update automatically, but I noticed today that this wasn't working properly, so I clicked on "check for updates" and she came back with the following message:
  "Windows could not search for new updates, error found: Code 80070490 Windows update encountered an unknown error.

  Under the error message, it lists that the ' most recent Check for Updates "was on 11/25/2009 and"updates have been installed"on 11/25/2009.
  But when I checked "View update history" to see updates did not, all the updates that are listed have actually managed, no updates have been identified as having failed. The last update was actually - definition update for Windows Defender on 12/29/2009 - and the previous update - update for the Microsoft XML Core Service Pack 2 (KB973688) 25 / 11 / 2009.

  I had this same problem earlier this year with the code 80070490 error come when I tried to update Windows and after trying all the solutions suggest online (including the assisted Microsoft Online Support), I had to contact the Support of Tecnical Microsoft on the phone and he needed someone to help me create a completely new Windows which meant that I lost everything in my old windows.

  I don't want to go through this again, can anyone help?

  Ebony

  I'll give you three options then I'm outta here for the new year.

  1.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  2 uninstall SP2, and then recover (AKA repair installation) by http://support.microsoft.com/kb/958044.

  3. backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the deletion appropriate before installing any Windows Service Packs or IE updates and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  =============================

  If it was my computer or I was responsible for setting, I would have #3 now. Good luck & Happy New Year!

  On & outta here...

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I'm trying to update, but the creative cloud window freezes and shows a small window with the red icon cloud in. that neither of these respond to mouse, a beep is heard for error when you click it. can close only with windows Task Manager. I can send a sc

  

  uninstall the desktop application, cleaning by use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6 and reinstall, apps download Adobe Creative Cloud | CC free trial Adobe

• Windows 7 freezes, sometimes shows bluescreen and shows different errors

  Over the last 2 or 3 weeks, I had intermittent problems with my pc. Packard Bell iXtreme 6620 UK.

  I got a pc of HRT for a few months.
  When I acquired, I added an extra hard drive and I replaced the wifi card
  with a USB ports.
  Since then, the only change is a new graphics driver.
  No hardware or software changes for at least 3 months.

  Problem just started occurring a couple of weeks.

  Most of time, I have no problems running Win7, but sometimes the
  PC won't start, just beeps and restarts. This is it 2 or 3 times,
  and it can offer repair system. If I don't, then try to
  restart normally, and then usually it starts ok. If I accept it then
  says it is the repair, then try to reboot. I usually then power
  downwards.

  Sometimes during the restart cycle where I put upward, then after a
  shortly, I get a continuous beep of high slope and nothing else happens.
  I've then power off, and if I leave for about 10 minutes, then it usually
  restarts ok.

  Sometimes when I walk to get the Packard Bell splash screen, then the
  PC crashes, nothing else is happening.

  Sometimes I get to the Windows startup screen that says only: departure
  Windows and once again it hangs and nothing else happens.

  Sometimes when you run then the pc freezes. In this case, I usually for
  turn the power off and tell it to start normally when I turn on again. Generally
  in this case I do not get the above mentioned beep.

  Sometimes when it's cold, I get a BSOD indicating usually
  INTERRUPT_EXCEPTION_NOT_HANDLED.
  Stop: 0x0000003D
  (0xFFFFF880009CB1B0, 0 x 0000000000000000, 0xFFFFF880016FB50)

  Today, I also received the message
  ataport.sys
  Address FFFFF880016FBB5DA1FFFFF8800...

  I just got a message that the pc has been a mistake.
  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 2057

  More information about the problem:
  BCCode: 3B
  BCP1: 00000000C 0000005
  BCP2: FFFFF800032839E3
  BCP3: FFFFF88006CC0070
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\080614-21637-01.dmp
  c:\systemp\WER-52681-0.SysData.XML

  This occurred after the pc rebooted while I had an open file.

  Asked me if I wanted Windows to seek a solution. I answered Yes
  and after one or two seconds, the dialog box has disappeared without a message.
  I ran Memtest who reported everything is OK. From others
  suggestions that I found that I also ran TDSSkiller from Kaspersky.
  This also gave a certificate of good health.
  I had these problems again a few minutes, turned off and rebooted
  and all is well.

  I got a pc of HRT for a few months.
  When I acquired, I added an extra hard drive and I replaced the wifi card
  with a USB ports.
  Since then, the only change is a new graphics driver.
  No hardware or software changes for at least 3 months.
  Problem just started occurring a couple of weeks.

  Windows - custom views - administrative events Event Viewer gives the
  Next:

  Error:
  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  Caution:
  The driver failed to load unit WpdBusEnumRoot\UMB\2 \Driver\WUDFRd & 37c186b & 0 & STORAGE #VOLUME # _____? _USBSTOR #DISK & VEN_GENERIC & PROD_MINI_SD_READER & REV_1. 06 #7 & 29D2AFC & 0 & 058F63776378 & # 4.

  Error:
  The computer was restarted after a bugcheck.  The bugcheck was: 0x0000003b (0xfffff800032839e3, 0xfffff88006cc0070, 0x00000000c0000005, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 080614-21637-01.

  Error:
  Audit events have been abandoned by public transport.  0

  Criticism:
  The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.

  directly after
  Error:
  System shutdown prior to 16:48:33 on? 06 /? 08 /? 2014 was not planned.

  And:
  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  Hello

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. have you installed Windows 7 Professional before the show?
  2. What is the exact model of your computer number?

  I appreciate your efforts to resolve the issue. Thank you also to provide details on the issue.

  The problem may occur due to device driver damaged or problems with the hard drive.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Remove all external devices connected to the computer except the mouse and keyboard and check the issue.

  If this does not help, then use method 2.

  Method 2:
  As you tried to run the memory test that shows that the memory has no problem, it is possible that the hard drive has some bad sectors, then I suggest you run the disk check and see if it helps.
  Refer to this article:
  Check your hard drive to find errors in Windows 7
  http://support.Microsoft.com/kb/2641432

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Windows vista, freezes and then crashes.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: all or any program, internet, photoshop, illustrator, facebook, gmail, live.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Check to see if there are any BlueScreens or more are available with BlueScreenView and MyEventViewer
  information to help. If no BlueScreens post anything relevant you see in MyEventViewer in a message
  in this thread and proceed b. below. If there is BlueScreens post any information that learn you
  them with BlueScreenView (as well as MyEventviewer) and check this thread for more information on
  Troubleshooting the BlueScreens - has. (my two answers albums).

  A. http://social.answers.microsoft.com/Forums/en-US/vistarepair/thread/842fa8cf-535e-4b5d-9416-85eb31edbe6f

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and
  Displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP)

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  =================================

  B. after having only checked with her above, if no blue screen.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to for many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Lightroom 6 / Windows 7 / freezes and goes to not responding do not state on launch

  I just bought and office intstalled LR6 on my windows 7 (64B).  When he asked to import my photos that I stressed my "My pictures" directory and it treatment to import each photo/file in the directory... which was more 19 000.  He finished about 2 hours later... and seems to work correctly.  Now the two day I can't program for work at all.  The main screen of LR comes with pictures of mountain, but he's right there with the windows cursor (circle) is going round and round... forever.  When I do a mouse click on the screen, it just says: LR is not responding and I have to stop him.  Don't know what to do... any ideas?

  Can or should I do an uninstall and reinstalled?  Adobe will allow me to do it with the code already used?

  Any help appreciated... Thank you

  Pete

  Hi Pete,.

  Update of Lightroom in version 6.3 first, then check you suggest.

  Visit this link to download the version 6.3: keeping up-to-date for Lightroom

  Kind regards

  Claes

• YouTube 1080 p export freezes and shows Video ghost green or yellow

  We run PR 2015.2 on a new Nvidia 970 i7 - 5820K, 64GB system and exported several videos using the YouTube HD 1080 p preset. Videos play perfectly in Chrome, but always get a green or yellow reverse video ghost effect that last a few seconds to the timecode even in the video or periodically hang when played in Safari on a Macbook Pro, OSX El Capitan 10.11.5, Safari 9.1.1 11601.6.17 2012 system. I had my son check out the videos on his Macbook in another State and they exhibit the same behavior.

  The videos are:

  https://youtu.be/qAZRr93teIA

  https://youtu.be/fG_4WBWkV5c

  Any help or suggestions greatly appreciated that this continues our business start.

  Thank you

  Rob

  We now use Vimeo Pro and they play perfectly in Chrome, Firefox, and Safari.

  Thank you...

  Rob saffron

  sharewisdom. TV

• Devices and printers icons

  How do I change the icon of the generic printer for a period that best represents my printer. No problem on the other two systems with Win7, but the new machine gives me a way to change. It is for me a custom icon for my HP printer, but a generic for my Epson printer. Have some custom icons for the two printers on other machines in Win7. Help!

  There is a lot of information on the web about this.  For example, to see the results of this research--> https://www.google.com/search?q=windows+7+devices+and+printers+icons+change&ie=utf-8&oe=utf-8

  This tutorial explains how to make custom icons for devices Printers &--> http://www.sevenforums.com/tutorials/224162-devices-printers-change-device-icons-custom-icons.html

  But since your other Win 7 systems give you a specific device for your printer icon, I think all you have to do on this system is to check the appropriate box as shown here--> http://www.thewindowsclub.com/windows-7-download-latest-drivers-icons-devices-automatically once you check the box, you need to maybe reboot or do a manual Windows Update check updates to download the correct icon.

• Windows 7 freezes the first time I turn on my pc

  Hello

  Every day I turn on my computer for the first time, my windows 7 freezes and I have to do a hard reboot, so I can use my pc normally.

  I do not get a blue screen... windows only remain with jelly screen (it can still freeze for hours), without error, without newspaper... I don't know what to do to understand what is happening.

  Any ideas?

  Thanks in advance.

  David

  Hi David,

  Thanks to join Microsoft Community where you will find all the required information on the Windows operating systems!

  When the computer is turned on, it freezes.

  To work with the issue, I suggest you check out the site:

  Crashes Windows or freezes

  http://support.Microsoft.com/kb/2681286?WA=wsignin1.0#method22

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  For any question related to Windows, feel free to contact us.

• Windows 7 taskbar and start menu large icons are either missing (empty by default) or do not show the right program.

  I use Windows 7 Home Premium on an AMD Athlon (TM) II X 4 630 2.80 GHz with 6.0 GB of RAM (64 bit OS). PC is up-to-date with the latest updates and use Norton Anti Virus.

  I used this PC for several months with no problems. After doing some research in my menu of the taskbar Windows Explorer and start icons have become corrupted. The links always work but do not show the right program.

  I tried several things to fix this. I removed everything in the start menu and taskbar, rebooted, added a few back but the problem still exists. I deleted the icon cache file (renamed to db.old), restarted, problem still exist. I made a recovery of a checkpoint system before the problem was still not fixed. When I go to small icons, the problem disappears. The problem only seems to appear when you use large icons in the bar of tasks and the start menu.

  Based on what I've tried so far is there any other suggestions on how to fix this?

  This tutorial is to rebuild the icon cache when the cache is corrupt.

  http://www.SevenForums.com/tutorials/49819-icon-cache-rebuild.html

  Option One is easier.

  If that doesn't do anything for you, please repost to Windows 7 forum, section office and customization:
  http://social.answers.Microsoft.com/forums/en-us/w7desktop/threads

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Icon "Are the selected markers to separate the export audio files" is grayed out outside in the markers window. The titles show starts but no end of times, and yet time is calculated.

  I have a large wav file to finish securities as a mixer and inserted the CD markers where I want the marked pistes. Icon "Are the selected markers to separate the export audio files" is grayed out outside in the markers window. The titles show starts but no end of times, and yet time is calculated. Why can't I export those items marked as separate files?

  You must make the markers of track in regions for the Export of work function. Make sure that you have placed a marker at the end of the file, as well as at the beginning of each track. Then select all the markers in the marker list by left clicking the first then shift left click on the last. You can then merge markers in the channels using the comb as icon (3rd from left) at the top of the list of markers. You will then be able to export the lines marked as separate files.