Teredo tunneling pseudo interface of windows 8 pro driver works do not error code (code 10).

Please answer as soon as possible... That's what it shows... code (10)... I tried to update the driver... It shows that it is the best driver available and installed in my camera...

OT: teredo tunneling pseudo interface driver Windows 8 pro does not not work... Please help (code 10)... I tried to update shows it is updated and the best driver is installed on my laptop

Hi Shilratna,

The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

I suggest you try the steps from the following link:

FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

I hope this helps. Let us know if you have other problems with Windows in the future.

Tags: Windows

Similar Questions

  • Teredo Tunneling pseudo-interface "could not load driver software error" windows vista business 32-bit

    I found "Teredo Tunneling pseudo-interface" which showed a yellow exclamation in device under network adapter & just below the Realtek PCIe Ethernet controller Manager & the error was that the driver does not work properly. This is why unfortunately I uninstalled the driver. now, who disappeared from the Device Manager & I can't find even after restarting the system.

    so kindly advise me what is the problem if it does not fit in its original location & how to get it in the Device Manager?
    Please find the screen pictures of the error for your reference on skydrive https://skydrive.live.com/#cid=D98B7D8BBADFB4CF&id=D98B7D8BBADFB4CF%21105

    Hello Asif,

    Thanks for the reply.

    It could be that he was corrupt entry that has been duplicated. Uninstalling the one with the bang yellow doesn't cause problems with job entry.

    I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

  • I have no sound it says windows Teredo Tunneling pseudo-interface must be re installed

    It isThere there's a problem with the driver for Teredo Tunneling pseudo-interface. The driver must be reinstalled.


    I suggest you go to Device Manager and see if there is an exclamation in addition teredo tunneling. If Yes, then follow the steps in this link to update the drivers:


    If not, try running this fixit and check if it helps:


    It will be useful.

  • Teredo Tunneling pseudo-interface must reinstall in WIndows 7

    I need to reinstall Teredo Tunneling pseudo-interface so that I can use the homegroup in Windows 7, because it requires IPv6. IPv6 is avoided in network adators etc.

    How can I reinstall Teredo Tunneling pseudo-interface to only show in network adapators in Device Manager, please?

    I have my Dell Windows 7 upgrade DVD but do not know how to retrieve this file.

    Possibly a Dell-techno read it may be able to help?


    Do a system restore, choose a date before things are flawed.

    All programs > Accessories > system tools > system restore.

    Thanks for the suggestion

    I've since found a solution to the problem, can be useful if others suffer from the same problems:


  • Could not load the driver for Teredo Tunneling Pseudo-Interface


    Does anyone know how to fix this problem (Vista) Business

    Teredo Tunneling Pseudo-Interface

    Could not load driver software

    Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 10.

    Signature of the problem
    Problem event name: PnPDeviceProblemCode
    Architecture: x 86
    Hardware ID: * TUNMP
    Configure the class GUID: {4d36e972-e325-11ce-bfc1-08002be10318}
    The PnP problem code: 0000000-a
    Driver name: tunmp.sys
    Driver version: 6.0.6000.16386
    Driver date: 02/11/2006
    OS version: 6.0.6000.
    Locale ID: 2057

    Additional information about the problem
    Bucket ID: 12121968


    Hi Dave

    Can you please give us more information on your laptop and what is happening exactly?


    My laptop is a HP G7030EA - MS Windows Vista Home Basic 32-bit SP2 Intel Pentium Dual CPU T2330 @ 1.60 GHz, 1.0 GB RAM, Mobile Intel 965 Express Chipset Family, bought new in February 2008.  I have not changed any hardware, software, etc.  I do not use it for games, only for things such as e-mails and visit websites

    Until last month when my desktop computer broke, I used the laptop only occasionally as a backup of the computer.  It never quite worked and seems to be unable to handle several tasks at once, often taking minutes for Google to load.  When I get impatient and click the mouse too much I heard a horrible noise and the screen mouse cursor freeze for a minute or two.

    As the laptop has become my main computer at the moment, I downloaded AVG PC Tune Up to see if it would improve it performance has not helped.  I was surprised to see how much memory the AVG2013 anti virus program uses, but wonder if the speed of connection and freezing problems I experience result (AVG Tune Up conclusions on) the Teredo Tunneling pseudo-interface unit does not properly.

    I follow AVG on screen re boards: looking for a software driver update but none was found, and I got the message "the best driver for your device software is already installed.  Windows has determined that the driver software for your device is up-to-date, Tun Miniport, Microsoft Map.

    This left me confused.  If there is a problem with this device, no solution seems to exist.

    Any help that will allow my laptop to function normally is welcome.

    I understand that you want to know if the teredo adapter can cause performance problems.

    The teredo adapter should not cause performance problems.  It is really just used to allow devices work IPv4 with IPv6 Internet service provider.  If the ISP was using IPv6 and your system did not have the adapter teredo, so it wouldn't work properly with the service provider.  For now, IPv6 is a significant minority that the world continues to work on IPv4 as not all networks, Internet service providers, and businesses are not entirely passed to IPv6.

    This thread on the Microsoft forums goes into a little more detail about the adapter teredo including how to disable it so that you only see it in Device Manager.  Unless you are using IPv6, this shouldn't really be a problem.

    If you start in safe mode, the performance problem persists?  Turn on the computer and press F8 once per second for the Mode option, safe mode with networking.  This will help you to further isolate the performance problem.

    Furthermore, does this happen that the adapter is connected or not?

  • Teredo Tunneling Pseudo-Interface

    In my view, that it is a Trojan horse virus. I updated my computer security, Microsoft Security Essentials both Trend Micro Internet security. None of them was able to remove this from my system cards. I even had to put a wireless adapter on my computer because when I tried to connect for updates when you use an Ethernet cable, it could block the updates. anyone with this problem let me know how you got rid of him. Thanks, Ron

    Hello RonBowen,

    Thanks for your post.  It is not a virus, it is also a part of the Windows operating system.  I understood as well a link that contains information to repair the adapter and a link to turn it off if you want.  Please see:

    How to repair Teredo Tunneling pseudo-interface 6to4 adapt

    How to disable Teredo Tunneling pseudo-interface 6to4 adapt

    I hope this helps.

    See you soon

  • How can I fix adapter Teredo Tunneling Pseudo-Interface of network problem that shows an indication of a problem in the Device Manager?

    I've never seen this problem before.  The yellow triangle with the exclamation point is visible on this network adapter called Teredo Tunneling pseudo-interface.  The driver update does not work, and apparently the last and the best driver is already installed for this device.  I tried to disable and searching for the hardware changes.  Whenever the device is displayed again with an indication of problems triangle and even yellow exclamation point.  It is said that the device cannot start.  I rebooted the machine to see if something has changed.  There can be no.
    I just uninstalled the device and scanned for hardware changes, but it has not been detected and remains missing under the network adapter category.  I ran diagnostic system provided by HP software, but nothing seems to be defective.


    1. What is the code that you see under the status of the device and the exact error message?
    2 have you made changes on the computer before this problem?
    As you have already tried updating the drivers and still you face the same problem, you can try to uninstall the existing driver and manually download the stand-alone version of the driver and install it.
    Step 1: first of all, I would say you temporarily disable any security software and then try to install.
    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
    Step 2: Now try to install the drivers
    a. open the Device Manager by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Device Manager.
    If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    b. identify the sound card, right-click on it and select Properties .
    c. go to the driver tab and click Uninstall to uninstall the driver associated with the device.
    Restart the computer and install the latest driver.
  • How to install Teredo Tunneling Pseudo-Interface

    Dummy me... In Device Manager, I uninstalled the Teredo Tunneling pseudo-interface. I need to know how to reinstall this interface. I've seen the other reviews on the web on how to set it up, but all those who assume that the interface is still visible in Device Manager.

    So where can I find the procedure to install this?

    I'm on Windows 7 Professional x 64.

    Thank you

    You have enabled the option - Show hidden devices ?

    Device Manager > view > CHECK show hidden devices.

    Expand the network adapters

    Microsoft Teredo Tunneling adapter is it listed?

    See you soon! "That's all a pension chequer nights and days,"
    Where destiny with men for pieces plays;
    Here and there, mates and kills.

    In a world without walls and fences, who needs windows and doors? Life sucks! Getting used to!

  • [SOLVED] Error 404 Google + card Tunnel Teredo Tunneling Pseudo-Interface disabled in NetBIOS over TCP/IP

    I realize that it is a long title.  It could be useful describe my problem.

    Recently, I downloaded something (not sure if I can't talk about website) and with download received 4 bad files found by Malwarebytes named: PUP. OfferBundle and PUP. ToolbarDownload.  These 4 files were quarantined and then removed, but this does not solve my problem.  I ran Microsoft and other spyware, but nothing more has been discovered.

    I have Norton Internet Security, which extends constantly and I always have these terrible files.

    I can not access Google search engine.  I get this message: error 404 (not FOUND)! 1

    The address bar reads: cgi-bin/redirect.ha.  I have another computer and am able to access Google since the router same use so I know there are still a few malware rootkit on my computer which may be connected to the Teredo Tunneling adapter, I don't understand.

    I'm not sure how to solve this problem.  I don't know where watch, but ran many scans of data collection.  Here is a part of a single test showing wireless and LAN configurations:

    Windows IP configuration

    Name of the host...: StrikingEagle-HP

    Primary Dns suffix...:

    Node... type: hybrid

    Active... IP routing: No.

    Active... proxy WINS: No.

    ... DNS suffix search list: att.net

    Wireless Network Connection 2 wireless LAN adapter:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Microsoft Virtual WiFi Miniport adapt

    Physical address.... : 20-10-7A-1C-AF-7D

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Wireless network connection Wireless LAN adapter:

    The connection-specific DNS suffix. : att.net

    Description...: Realtek RTL8188CE 802.11b/g/n WiFi adapt

    Physical address.... : 20-10-7A-1C-AF-7D

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    IPv6 address: 2602:306:cdb8:5300:b5fc:b411:6df0:e722 (Preferred)

    Temporary IPv6 address...: 2602:306:cdb8:5300:b9d4:2772:d89a:3a5f (Preferred)

    Address IPv6 local link...: fe80::b5fc:b411:6df0:e722% 13 (Preferred)

    IPv4 address...: (Preferred)

    ... Subnet mask:

    Lease obtained...: Sunday, April 22, 2012 23:29:35

    End of the lease...: Monday, April 23, 2012 23:29:34

    ... Default gateway. : fe80::42b7:f3ff:fec9:a2e0% 13

    DHCP server...:

    DHCPv6 IOOKING...: 320868474

    DHCPv6 DUID customer...: 00-01-00-01-16-A6-EF-8E-2C-41-38-5C-76-B6

    DNS servers...:

    NetBIOS over TCP/IP...: enabled

    Ethernet connection to the Local network card:

    The connection-specific DNS suffix. : att.net

    Description...: Realtek PCIe GBE Family Controller

    Physical address.... : 2C-41-38-5C-76-B6

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    IPv6 address: 2602:306:cdb8:5300:584d:2ddf:6 a 08: f6a7 (Preferred)

    Temporary IPv6 address...: 2602:306:cdb8:5300:575:56e9:298d:9097 (Preferred)

    Address IPv6 local link...: fe80::584d:2ddf:6 a 08: f6a7% 11 (Preferred)

    IPv4 address: (Preferred)

    ... Subnet mask:

    Lease obtained...: Sunday, April 22, 2012 23:29:32

    End of the lease...: Monday, April 23, 2012 23:29:32

    ... Default gateway. : fe80::42b7:f3ff:fec9:a2e0% 11

    DHCP server...:

    DHCPv6 IOOKING...: 237781304

    DHCPv6 DUID customer...: 00-01-00-01-16-A6-EF-8E-2C-41-38-5C-76-B6

    DNS servers...:

    NetBIOS over TCP/IP...: enabled

    Tunnel adapter isatap. {38655146-6231-4777-AB1C-2DC12E0017FD}:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Microsoft ISATAP adapter

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 9:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Microsoft 6to4 card

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Tunnel adapter ISATAP.att.NET:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. : att.net

    ... Description: Adapter Microsoft ISATAP #2

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Card tunnel Teredo Tunneling Pseudo-Interface:

    The connection-specific DNS suffix. :

    ... Description: Teredo Tunneling Pseudo-Interface

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    IPv6 address: 2001:0:4137:9e76:2413:2ee1:3f57:feb8 (Preferred)

    Address IPv6 local link...: fe80::2413:2ee1:3f57:feb8% 14 (Preferred)

    ... Default gateway. :

    NetBIOS over TCP/IP...: disabled

    Server: dsldevice.att.net


    Name: google.com


    Please note the last entry.  DHCP is not enabled.  NetBIOS over TCP/IP is disabled.  Now, it's for the Tunnel Teredo Tunneling Pseudo-Interface AND Google map is registered immediately thereafter with a list of IP addresses.

    Would be - why I can't access Google?  How can I fix it?  How can I activate this card Tunnel?  I want to do this?  I did a ping for the Tunnel of the card test and it seemed to work OK.  How do I know if card Tunnel is really on?   Why is the Tcpip BIOS

    people with disabilities in the last list of IP and not on others?  Why are all those Google IP addresses listed?

    Any help is greatly appreciated.  I'm very stuck.  Thank you.

    Edit = Edit

    has run another scan: MicrosoftSecurity Agent (I think) that produced a VERY long report, CBS.  There are a lot of mistakes in this report, and I don't know which ones were repaired my Microsoft or if errors are related to my problem.  Here are some of the errors.  All t errors are repeated throughout the report. I hope this info is helpful:

    2012-04-11 07:29:06, CBS Session info: 30218206_2951615106 initialized by the WindowsUpdateAgent client.

    2012-04-11 07:29:06, missing version of the CBS identity information. [HRESULT = 0 X 80070057 - E_INVALIDARG]

    2012-04-11 07:29:06, error CBS has no identity shred: Microsoft-Windows-Internet Explorer-LanguagePack [HRESULT =

    0 X 80070057 - E_INVALIDARG]

    2012-04-11 07:29:06, CBS Session info: 30218206_2951615106 initialized by the WindowsUpdateAgent client.

    2012-04-11 07:29:06, missing version of the CBS identity information. [HRESULT = 0 X 80070057 - E_INVALIDARG]

    2012-04-11 07:29:06, error CBS has no identity shred: Microsoft-Windows-Internet Explorer-LanguagePack [HRESULT =

    0 X 80070057 - E_INVALIDARG]

    2012-04-11 07:29:07, CBS Session info: 30218206_2956451109 initialized by the WindowsUpdateAgent client.

    2012-04-11 07:29:07, info CBS doesn't have the package opened internally. [HRESULT = 0X800F0805 - CBS_E_INVALID_PACKAGE]

    2012-04-11 11:20:30, CBS M² info: could not start the download with pattern file: C:\Windows\servicing\sqm\*_std.sqm, flags: 0 x 2 [HRESULT = 0 x E_FAIL 80004005]

    We are pleased to know that the problem is solved.
    We know in the future if you have problems with Microsoft Windows.
  • Teredo tunneling Pseudo-Interface driver problem


    I was wondering if anyone else has had problems with this driver "teredo tunneling Pseudo-Interface"?

    I just bought a computer laptop sony vaio with windows 7 preinstalled (and a buncha need other nonsense that I don't really want or (?)), and from the day I brought it home I was getting blue screen breaks down every day, sometimes several times a day, with the 'bad pool head' as a reason.  (the computer used to determine tool wasn't bad RAM, which seems to imply bad driver any...)    After HOURS of research, relocation, etc. (and I'm really NOT very savvy... was a hellish nightmare of tedious) I found that my vaio under the "devices" window, said there was a problem with this driver.  I don't know what it is, how it happened on my computer and even after researching online, I can't even really tell what it is supposed to do.  I have since uninstalled/removed and for 48 hours up to now no blue screen... I keep the crossed numbers.

    even had squad geek of the best buy on line today, to try to make sure there weren't remainders hidden him somewhere and the gentleman, that I spoke also put doubt how it came to be installed on my computer, and how it got damaged.

    anyone has any comment on the issue, is known to cause problems or was my isolated problem? I have not intentionally saved all depressed, I have no idea how to do that, with regard to troubleshooting.

    any help is greatly appreciated.

    a life seriously "non-geek" in a world of geek...


    Since this is a new computer, you really need to get Sony to repair or replace the system. BlueScreens
    on a new system of are NOT good and should be set by the manufacturer of the system.

    Sony - Contacts

    Sony - drivers

    Sony - Support


    If you want to troubleshoot problems check this thread for more information on using BlueScreenView.
    MyEventViewer and other methods of troubleshooting BlueScreens - two top answers.



    Check these threads for the teredo pseudo-interface.



    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Map Microsoft 6to4, ISATAP Adapter #2, #3, Teredo Tunneling Pseudo Interface, PCI Device do not work in my ASUS k55VM laptop. Help, please

    Map Microsoft 6to4, ISATAP Adapter #2, #3, Teredo Tunneling Pseudo Interface, PCI Device do not work in my ASUS k55VM laptop. Code 31 for others and for the PCI device is code 28.

    Hi Amit,

    Thanks for the reply.

    Step 1: Check out the link: http://www.microsoft.com/en-us/download/details.aspx?id=8957

    Step 2: See the articles for the problems of driver on the computer:

    Update drivers:

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Automatically get recommended drivers and updates for your hardware


    Note: The article applies to Windows Vista too

    Tips for solving common driver problems


    Step 3: Run the hardware troubleshooter

    Open the hardware and devices Troubleshooter


    To solve the problems of slow computer performance:

    Optimize Windows 7 for better performance


    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss

    How to make a computer faster: 6 ways to speed up your PC


    Ways to improve your computer's performance


    Slow PC? Optimize your computer for peak performance


    Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    Please let us know the result. If the problem is still not fixed, we will be happy to help you further.




    Please, do not type in uppercase.  It is difficult to read and is considered rude/scream.  Thank you.

    Follow the solutions listed here


  • Problem with the HP 430 (bluetooth and teredo tunneling Pseudo-Interface) drivers


    recently my bluetooth function cannot to connect to other devices... This is what happens to the Device Manager:

    What is teredo tunneling pseudo-interface is for? is it important?
    If so, how to solve this problem?
    How to solve the problem of the bluetooth?

    Generic Bluetooth adapter:
    USB\VID_03F0 & PID_311D & REV_0001
    USB\VID_03F0 & PID_311D

    Teredo tunneling pseudo-Interface:

    * TEREDO

    Go to Device Manager, right click on the device and select Update driver. Path to the .inf file that you downloaded for use.

  • Teredo tunneling Pseudo-Interface desintaler

    Teredo tunneling Pseudo-Interface uninstall how to reinstall


    Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:


Maybe you are looking for