terminals connected to various types
Hello
This error
but they are the same two data type?
_____________________________________________________
These can be wired together as their data types (digital, string, array, cluster, etc.) do not match. View the contextual help window to find out what type of data is required.
The source type is table 1 d of
cluster 1 element.
The sink type is table 1 d of
cluster 1 element.
_____________________________________________________
Why is this?
Basically, I want to make a xy graph,
1 signal either the x axis and 3 others plotted on axis y
any help is appreciated
VI attached
Thank you
Daniel
Then you need to build the array
Tags: NI Software
Similar Questions
-
I have a Mid-2010 Mac Pro Tower running OS Yosemite to which I would like to connect a Tower (G-Technology) G-Speed Q RAID via eSATA connection. What type of card PCIe eSATA should I install in my Mac Pro tower to enable such a connection?
https://eShop.MacSales.com/item/NewerTech/MXPCIE2E2U3/
https://eShop.MacSales.com/item/NewerTech/MXPCIE6G2S2/
https://eShop.MacSales.com/item/NewerTech/MXPCIE6GRS4E/
https://eShop.MacSales.com/item/sonnet%20Technologies/TSATA6PROE2/
-
Mac OS El Capitan cannot share a VPN connection that is type of IKEv2
I have a few VPN connections, I share via Wi - Fi on my mobile device. Here's what I do:
I have a Macbook Pro with Ethernet port, I have some work VPN connections (some type of IPSec, some IKEv2). First I plug the cable to the Ethernet port, then I start a VPN (settings-> network-> Connect) connection, finally, I share the VPN (settings-> sharing-> Internet sharing) via Wi - Fi connection so that my mobile device can connect and use the VPN connection.
This work really well for me with IPSec VPN connections. But today, I tried to switch to an IKEv2 VPN connection, the VPN works well, but I can't share it on a mobile device via Wi - Fi, because I couldn't see the connection in the list "share your connection from" (Preferences-> sharing-> Internet sharing system)
Are there any technical problem that IKEv2 cannot be shared? Or is there that all parameters must be made so that all VPN connections must appear in the list to share?
evpn https://support.purevpn.com/IKEv2-Configuration-Guide-for-OS-x-El-Capitan-by-pur
-
Router Netgear WNA3100 give up wireless connection with various devices.
original title: netgear abandons the connectionI have a netgear WNA3100 wireless adapter, our router is a WII-G300N buffalo: router wireless Nfiniti broadband
the laptop that I use has no connection problem and stay connected so I know that's not the router, my partner has a ps3 and xbox and none of those who suffer to abandon the connectionI googled various questions about the problem and it seems that there are many people suffer the same probs, I was wondering if there was a way around it.BTW, I'm a complete blonde when it comes to computers any advice could you ensure that a total novice he'd understandThanks in advance :) for all boardsI have a netgear WNA3100 wireless adapter, our router is a WII-G300N buffalo: router wireless Nfiniti broadband
the laptop that I use has no connection problem and stay connected so I know that's not the router, my partner has a ps3 and xbox and none of those who suffer to abandon the connectionI googled various questions about the problem and it seems that there are many people suffer the same probs, I was wondering if there was a way around it.BTW, I'm a complete blonde when it comes to computers any advice could you ensure that a total novice he'd understandThanks in advance :) for all boards13 hours later, I know not if I solved but the only thing I did different is to take the usb adapter out of its cradle and connected directly to the USB on the front of the pc, well, has not declined more than 4 hours and I can now play WOW without loss of connection every two minutes :) -
XP SP3 laptop computer connects to various WiFi hotspots but not to an individual.
Just upgraded to Verizon MiFi 2200 MiFi 4620 the personal hotspot. Our other Office XP SP3 computer, a Windows 7 laptop and Tablet Android ASUS everything automatically detected and entering the network key/password, all connected to the hotspot and the WWW.
Fortunately, the XP SP3 laptop connects to other WiFi hotspots and will always connect to the MiFi 2200 old if it is powered even if, of course, he cannot access the WWW, because Verizon's network no longer recognizes the 2200 due service is transferred to the new 4620 MiFi.
The XP SP3 laptop detects the new hotspot very well. The command 'View available wireless networks' shows the new hotspot, but when 'Connect' is attempted he goes just in the cycle to appear in the connection, but returned eventually to view available wireless networks. The 'Connect' button is available, implying that it would connect so click on new.
Use the same settings (SSID, password, encryption, etc) for the device problem than others who work as they should. It seems to be an incorrect setting or adjustment in the laptop but I can not understand that one. I compared the services running on two XP machines and have found no obvious inadequacy.
Advice?
Thank you!
When you say that the new device has the same encryption, do you mean that you know that both old and new devices use the same type of encryption (for example, WPA2, WPA, WPA-TKIP, etc.)?
I noticed the following two statements in the Guide of the user for the MiFi 4620 L (page 30)
- WPA/WPA2 Personal joint (safer, less compatible with older devices)
- IMPORTANT you must use the profile secured with WPA/WPA2 Personal Mode security settings mixed when possible.
Suggesting that the MiFi 4620 can by default that set... and that the hardware in your computer laptop problem is one of the 'old' devices that is not compatible with this setting.
Just as an experiment, temporarily configure the MiFi to 'Open' (see pages 30 et seq.) and see if your laptop can connect.
-
Application tries to connect to a type of bad plan
Hello
I just found a very unusual thing on my Hyperion Planning (11.1.1.2) installation.
I created two applications with two different plan types and contours (a group).
Now, when I'm working with the second request (created later than the first), it's all right, but when I opened one, it displays a list of the forms of the second request and says that it cannot connect to the database of hyperion.
I checked in the EA and all seems fine (first application exists and has its own type, second plan also exist, with the appropriate plan type).
Guess the problem is within Shared Services, is I not?
I also checked the shared application groups Services and found the plan type artifact is, for the purposes of foreground of the second type.
The obvious question is how to solve the problem?
The second question is what may have caused the problem?
Thank you in anticipation of your response
Marcin StawnyHello
You must have a schema that is separate for each application of planning in other applications will conflict, probably as you see now.
It may be in the same oracle database (I used the term database because I didn't know if it was oracle or sql server you were using) same database, separate schemas.Ok?
See you soon
John
http://John-Goodwin.blogspot.com -
Whenever I click on a link, .jpg, the image opens in Firefox. I want to use another program, but I can't change because .jpg does not appear in the list of file types for which you can specify actions. I know that there is an answer in the forum of Firefox, but I never get the option box that asks me what to do with the file, so I can't go to the box 'do this for all these types of files. Help!
JPEG images are considered normal browser content and do not generate an open/save/Cancel dialog box, unless the site sends a special header indicating that it should be treated as a download (disposition = attachment instead of inline).
To Save the image, your best integrated option is to right-click on the image and use save picture as or if it's a link to an image, right click the link and save the link under.
But to start the image in a different program, I can't think a built-in feature that can do this, then you probably need an add-on.
I see for example, there are extensions to open an image in PhotoShop or Fireworks:
- https://addons.Mozilla.org/firefox/addon/open-with-Photoshop/
- https://addons.Mozilla.org/firefox/addon/open-in-Fireworks/
If these programs are not relevant, if all goes well there is a more general purpose extension on the site that fits your needs.
-
After login to yahoo mail, facebook, flickr and possibly other sites, my sessions are ends prematurely. It wasn't a problem with the latest versions of Firefox. This isn't a problem with IE9, but I prefer to use Firefox. I run anti-malware, but which did not find any problem. Any suggestions how to fix?
I noticed that you have Firefox set to automatically start in private browsing mode. You use this setting in your previous version of Firefox?
Could test you with Advanced SystemCare surf off Protection? You can set the page modules. Either:
- CTRL + SHIFT + a
- "3-bar" menu button (or tools) > Add-ons
In the left column, click Extensions. If it requires a restart to take effect, Firefox should display a link for it.
Also, could you, check your connection here:
"3-bar" menu button (or tools) > Options > advanced > tab mini network > button "settings".
The default setting is "Use system proxy settings" but don't try "No proxy" and see if that helps.
-
Satellite L300 - WLan disconnect tries to connect to various Web sites
I have a Satellite L300.
Can I get the connection to the home page when I want to search other sites, I lose the connection. Page does not open.
Is this a problem with my laptop or a wireless router?Help please
> Is it a problem with my laptop or a wireless router?
Who knows, have you tested the WiFi connection using computers/laptops?PS: it s always advisable to update the BIOS and driver WLan to check if that helps solve these WLan connectivity problems.
-
How to periodically send various types of data via the Serial Port?
Hello! Everyone
I have to send data to LabVIEW to my device on the Serial Port.
I know how to send data on serial port in LABVIEW, I already have this part.
Now the problem is that I have several types of data I need to question my embedded device, if I want to send the query periodically command.
So lets say that my four Op Codes are the following, which will send four different types of query command to my device on the serial port.
(To be honest only OP_LED and OP_SENSOR is used now)
0, OP_SYNC
1, OP_LED
2, OP_SENSOR
3, OP_FUTURE
Structure of basic package is as follows:
Header (0x2C), Checksum, length of the data (n bytes), Op_Code (1 byte), length (length of Code + data Op)
For OP_LED, I need to send the package as follows:
0x2c 0x02 0x01 0 x 00 0x2F (0x2F being the XOR checksum) (calculation of Checksum part is done and SUB Vi form)
Length of the package this is 0x02
0x01 is Op Code for OP_LED
In the same way
For OP_SENSORi need to send the package as follows:
0x2c 0x03 0x02 0x00 0 x 00 0x2D (0x2D being the XOR checksum) (calculation of Checksum part is done and SUB Vi form)
0x03 is length of packet here
0x02 is Op Code for OP_SENSOR
So, how can I do this periodically in labview, in such sort that period can be adjusted whenever necessary.
Is there something in LabVIEW to do.
I had done the reception and decoding part and working properly.
So I must implement read and write the part of same while loop?
Do not insert in the table if you put data in an array at index 0. Just use array to build.
No need to have Visa to write don't be a part of wire to the wire of reference and error VISA go in the upper part. These wires should go THROUGH the entry VISA.
Don't your checksum requires all the bytes up through data? Righ now, you only put the checksum on data bytes and forget the opcode and length bytes.
Your sending is not the opcode for Opsync or Opfuture. You just send the empty tables. At the same time for the other two, you put the opcode in the data table. All your original opcode in the table build thread. Get the data out of these structures in case item which is supposed to represent the opcode.
xpress_embedo wrote:
Now it works but I have now two problems.
(1) OP_SYNC and OP_FUTURE do not data, but still receive its data on serial port, can I do something here as I have nothing when the table is empty in the structure of the case.
I do not understand this statement. Perhaps my answer above will fix any issue you have here.
(2) how can selection operation Code to be send is done using control façade but real application, this task should be automated to a certain frequency, like OP_LED package must go out to the serial port to 100msec and packet OP_SENSOR must go out to 1000msec, I do this.
Now you agree a little more architecture. I would encapsulate the code that is in the while loop as a Subvi. Then with the hand of your program while loop, use two time Express VI, a game for 100 msec, the other for 1000 msec. When an express VI is true, run the Subvi with a command set waiting for the answer. When the other VI Express is true, have it run the Subvi with the other set of commands.
The device responds with anything when you send these commands? You only send data. I see no VISA Read to be able to recover all the data.
-
Using the comparison function where 2 data tables various types
Is it possible to use the comparison function in Labview you to compare 2 arrays of types of different data (e.g. Boolean and double-precision)?
Would this work? Nested for loops of index on the TRUE values of the Boolean table.
-
Impossible to download on several site and various types of files
All of a sudden with Vista Home Premium for several years, cannot download. Have two accounts on the system, the two administrator. One with a passward and the other without. Can download from the account with a password that I rarely access as I am the only user of the system. When I try to download the protected past nonword account it asks if I want to open or save, start downloading but then says cannot download. No error message.
Have checked under Tools, internet options, as much as I can and see no difference. Both accounts have the same Norton running and options. Any ideas?
THX,
Use Internet Explorer 9.
I tried method 1, no change.
When doing method 2 has had some problems, no show stoppers. Creates a new user, and then went to copy the files by using Windows Explorer and found the new user was not in the users folder. Found that once I logged in as that user, he created the folder. While logged in I tried a download and it worked OK. Then I did the copy with the help of another user, less the files specified, I had a lot of ' there already you want to replace it? Invites the new user folder with most of them. Then when I opened a session under the new user, I had the same problem as above, download did not complete.
I then deleted the new user, created another new user but then only copied the files I knew were important to me as Documents, Favorites, and special programs. I have them one at a time and then connected under the new user each time and audited downloads were OK. Right now I'm able to download using the new user, seem to be able to access all my other programs and feel I should be OK. I have password protected user 'wrong', so I can't open it accidentally. Didn't want to delete just in case I need something later.
Sorry to be so long that responded to the questionnaire, long day at work.
If I have additional problems, I'll post. Thx for the help, much appreciated.
Rick H.
-
Connection to any type of Bluetooth or WiFi signal
This probably isn't the right place for this but it is the closest, I could find.
I have a device that uses WiFi for communication between others of its kind, and I want to be able to connect the data it transmits, may reproduce too.Is it possible to make my smart WiFi scan for this device and connect the data being sent?
{Hack us em you patch em}Hi game Hacker,.
No, it is not possible to connect to a Bluetooth or WI - FI activities under windows. However, you can search online for all the non Microsoft software that would help you accomplish this task.
Note: Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I have an oracle server which is our recovery server disaster. When I switch my application of the primary site to secondary site, we have a window of downtime during which it must implement the secondary site. When setting up the application on the secondary site, I am getting below error please take note that primary and secondary are always synchronized. The application uses the thin driver JDBC to connect to the database.
java.sql.SQLException: ORA-01017: invalid username/password; logon denied
However when I use the same user name and password to connect to the SQLPLUS it connects successfully. When I use the sqldeveloper or any other jdbc connection, it fails with the above error.
Can someone please advice what may be the setting on the oracle server that limits connections jdbc or any setting related to jdbc on the oracle client
Concerning
Pierrel
Post edited by: user11093423
For others this has been resolved with
This is the setting in sqlnet.ora
SQLNET. ALLOWED_LOGON_VERSION = 12
later, commenting on the above setting and restart the listener. It worked.
Thanks for all the answers
-
I noticed on all sites, I logged into my email address appear different, even e-mail addresses of my friends who are signed in on sites using my mac - is not only e-mail addresses in some cases, there is usernames for different sites, I agree with.
Clear history of Firefox = form > Prefrences = > privacy = > erase all data and have only checked form story (or what you want) and remove them.
Maybe you are looking for
-
10.11.6 beat external monitor
I have a MBP of 2015 the retina with a Benq 27 '' LCD monitor connected via HDMI. Everything was working just dandy and candy, until what I've updated OSX this morning and after restart - no monitor can be found. I tried SMC and NVRAM reset without s
-
How to use the internet browser on mt tv for something other than to the sony store?
I have a sony kdl-46nx720 braia Is it possible to display the Web page free hulu?
-
Office constantly crashes when you use Windows Explorer
Original title: Vista desktop does not properly Hi all I have a Vista PC, which once at the office, some services starts to run a bit wobbly, apps will work, but if you go in Outlook, which bombards. If you try and run anything specific with explorer
-
I have a simple application, I want to build. Currently I have a 8330, I would use the phone in topic as he test bench. Someone at - he comments?
-
Office 2003 does not work on Windows 7 Home Premium 64 - Bit
I have two new computers that came pre-installed with W7HP 64 bit and both are pre-installed with the product obviously not commercial office 2007 which we do not want to use. I own copies of Office 2003 and use these products on new computers. I t