Test bench for myDAQ

Hi all

I'm designing a test bench for myDAQ, I implemented using a test of VI for each function in the model of test bench and in the end, I write all these results in a word file. In fact, there is not any specific problem I want that the community please check this test if it needs any improvement specifically to report.

Thanks in advance for your help and time.

Concerning

Omer

To see a picture (or save) in the largest size, just right click on it with your mouse and click on the first option in Firefox (see the photo or something).

I am also attaching the control of typedef in 2013 version. BTW, you should use a project, LabVIEW, for your main VI and typedef controls in one place.

For example, if adding items to your control of the typedef:

Unbundle the cluster for the creation of report:

EDIT: finished the missing parts and wires for your VI.

Tags: NI Software

Similar Questions

  • Example of test bench for several elements of e/s FPGA

    Hello

    I'm looking for an example on the creation of a test bench that simulates multiple FPGA of e/s digital lines.

    I went through the tutorial of creation of test benches, but it uses only a single element of I/O.  E/s reading Point Name.vi is obviously an important part of this but I don't know how to structure the VI and assign the name (especially since things seem to get wired upward as if by magic of a single element of IO).

    Pointers to examples would be greatly appreciated.

    Thank you

    Steve

    Hi Steve,.

    Do you mean multiple channels or multiple signals for each channel?  In the tutorial, you have published, you can find the answer for each.

    To create multiple channels, just repeat steps 5 to 9 in section 'Test the FPGA VI on it development with a Custom VI' for your entries and steps 5-7 on the 'Testing out the i/o Item' for outings.

    To create multiple test samples for one channel, you can consult the section "Testing the FPGA VI with a more complex Custom VI".

    Best,

  • How to trigger the test bench to assign the stage = error

    Hi all, I have a LabVIEW VI my sequence step and I have a button give up the user can choose to interrupt the UI VI.  I want the button "Cancel" boolean to pass back to test stand this button drop = TRUE and I want to step in the sequence must be set to "ERROR".  Y at - it a command to send to the engine test bench to mark this milestone as an error?

    Thank you very much!

    Hello

    You can use the following APIs to set the result of your efforts.

    RunState. PreviousStep.Result.Status = 'Error' - this function will set the status of the previous step.

    You can use a stage of "Power adapter" (comes with TestStand), set the result of the previous step using the expression above. You can set a precondition for this step to run only if the Abort button = True.

    or

    runstate.step.Result.Status = 'Error' - this function will set the status for the current stage.

    There are also other values that you can pass for example of 'Success', 'Failure' and 'Jumped'

    I hope this helps!

    Deepak

  • interfacing with test bench

    I have an application that uses LabWindows under the MISTLETOE and the testbed as the test of leadership.  I see the function where Labwindows handles the events that triggers test bench.  However, I don't know where events are in my test application.  Where to define the mapping of events between the two applications?

    CalStand,

    More information is available here http://zone.ni.com/reference/en-XX/help/370052H-01/tsapiref/infotopics/app_user_interface_ui_message... and here http://zone.ni.com/devzone/cda/tut/p/id/4532 you can define custom user interface Messages that can be passed to your UI. More information on the inside of the UI event handling on the TestStand Reference Manual http://www.ni.com/pdf/manuals/373435d.pdf 9-17. Who help me?

  • How to become a tester microsoft for win8 beta?

    How to become a tester microsoft for win8 beta?

    Hi Yaniv Rosenblatt,

    You can read the following article and see if it helps:

    How to apply to become a beta tester for Microsoft

    You can also consult the following thread link:

    When can I request in beta for Windows 8?

    Hope this information is useful.

  • Test bench set property Value.vi - error 97

    I get error 97 test bench set property Value.vi.  I posted my code as an attachment.  AMP - PW FG1 - 1A_SPS.vi is the main VI.  The cluster of error can be seen in the .bmp file.

    Thanks in advance.

    I think that my problem was that I ran the VI outside TestStand.  When I ran the TestStand sequence called the VI, I had no errors.

  • Link to serial number USE of test bench with a labview VI

    Hello

    I want to use the number of input series to USE test bench in one of the labview VI of in my sequence so that I can output a few numbers in a spreadsheet, and they include the serial number of the object to measure. Is there a way to link the 2?

    Chris

    (See the attached example)

    Hello

    You can get your serial number using the following search string "RunState.Caller.Locals.UUT.SerialNumber".

    There is an example on the following link:

    http://forums.NI.com/NI/board/message?board.ID=330&message.ID=6938&query.ID=198397#M6938

    Hope this helps

    Concerning

    Ray Farmer

  • MMC hangs with print server when I try to print a test page for the server. Windows Server 2008R2 Printer HP1606n

    MMC hangs with print server when I try to print a test page for the server.

    Windows Server 2008R2

    Printer HP1606n

    Signature of the problem:
    Problem event name: BEX64
    Application name: mmc.exe
    Application version: 6.1.7600.16385
    Application timestamp: 4a5bc808
    Fault Module name: hp1100su.dll
    Fault Module Version: 0.3.1.36655
    Timestamp of Module error: 4dba6516
    Exception offset: 00000000000159bd
    Exception code: c0000409
    Exception data: 0000000000000000
    OS version: 6.1.7601.2.1.0.272.7
    Locale ID: 1033
    Information additional 01:00 c 6
    More information 2: 00c62f6d4134d9a2c3306d7c5b5b94b0
    3 more information: c9eb
    Additional information 4: c9eba0fb841db4dab90b359385c03455

    The module that seems to be the cause of the accident is the hp1100su.dll:

    Fault Module name: hp1100su.dll
    Fault Module Version: 0.3.1.36655

    The hp1100su.dll is a part of the driver for the printer.

    What you could try is uninstalling and reinstalling the driver of printer using the version of HP.

    I believe that the following may be the printer:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=4110410

  • Set up test environment for 8.6 CUCM

    We currently have CUCM 6.1.5 and it is expandable to 8.6.  I want to set up a test environment for our 6.1.5 of the migration on the database to 8.6 for the test.  However, when I go to download/order the product upgrade tool software it states that the software upgrade.  I guess I can't install a stand-alone installation 8.6 because it would take me install 6.1.5 and then upgrade.  Is this correct?

    Hi Eric,.

    The media may say 'upgrade', but on the DVD .iso image file can be used for the construction

    a standalone 8.6 so version

    See you soon!

    Rob

    "Always Movin' 'advance and never Lookin' back '-Springsteen

  • No Test simulation for VCAC510?

    Any Test Mock for VCAC510 launched... ?

    Everyone loves to share link for same, if run?

    Also, is there a dump of VCAC510... Everyone knows to share. Will be appreciated!

    Yes - all VCA exams are "open book" and each has a practical exam which is on the specific page for each certification: VMware Certification

  • Encryption with dbms_crypto does not correspond to vectors of tests published for OFB mode

    Hello

    I use the dbms_crypto package in Oracle Express 11.2 I am trying to see that changes of encryption according to the "operating mode".  For reference, I used vectors of tests published on the web site: AES Test vectors I used these test vectors for a while with several languages such as Python PyCrypto and have generally found the information on this page to be reliable.

    When you try to use the BBA (output feedback mode) with AES256 encryption, I get a result that does not match the name on the web site of Test vectors.  Curiously, the result I get when using BBA mode matches the indicated result on the vector of Test for the ECB mode Web site, and in fact, if I use dbms_crypto ECB mode I get the same result. (If I try the CBC mode, I get the result the CBC matches appear on the web site of Test vectors).

    This suggests that when you specify the OFB mode in the call to dbms_crypto.encrypt, it's actually using ECB instead.

    I'm happy to share my code with someone who is interested.  I have not write it here now, though. It's pretty simple.  I use to set the mode,

    l_modNUMBER: = dbms_crypto. ENCRYPT_AES256
    + dbms_crypto. CHAIN_OFB
    + DBMS_CRYPTO. PAD_NONE;

    very similar to the Oracle documentation on this topic.

    Thanks for your interest,

    Norbert Kremer

    Hi Norbert,.

    Please report to us that I did a quick test on versions Enterprise Edition 11.2.0.3 and the 12.1.0.1.0, the 12 c seems to be OK, but 11.2.0.3 has a problem:

    Using the first vector to test for the OFB 256 - bit AES encryption mode

    Encryption key: 603deb1015ca71be2b73aef0857d77811f352c073b6108d72d9810a30914dff4

    Initialization vector, ciphertext Test vector

    6bc1bee22e409f96e93d7e117393172a dc7e84bfda79164b7ecd8486985d3860 000102030405060708090A0B0C0D0E0F

    Result:

    Connected to:

    Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

    With the partitioning option

    SQL > @ofb

    Result: F3EED1BDB5D2A03C064B5A7E3DB181F8

    Expected: dc7e84bfda79164b7ecd8486985d3860

    PL/SQL procedure successfully completed.

    Connected to:

    Database Oracle 12 c Enterprise Edition Release 12.1.0.1.0 - 64 bit Production

    With the options of partitioning, OLAP, advanced analytics and Real Application Testing

    SQL > @ofb

    Result: DC7E84BFDA79164B7ECD8486985D3860

    Expected: dc7e84bfda79164b7ecd8486985d3860

    PL/SQL procedure successfully completed.

    I'll file a bug for this issue shortly and put you here,

    Greetings,

    Damage ten Monkshood

  • Creation of test data for a problem

    Hello

    I use this forum for a few months and it has been extremely helpful. The problem is that I really have no idea how to create some test data for a specific problem. I tried Googling, but to no avail. I had other users to create data test for some of my problems using a 'WITH' statement, but it would be great if someone could explain the logic behind it and how to address a specific problem where in the application, I use several tables.

    I know this is probably a stupid question and I'm relatively new to sql, but it would help a lot if I understand the process.

    Banner:
    Oracle Database 11 g Release 11.2.0.2.0 - 64 bit Production
    PL/SQL Release 11.2.0.2.0 - Production
    "CORE 11.2.0.2.0 Production."
    AMT for Linux: Version 11.2.0.2.0 - Production
    NLSRTL Version 11.2.0.2.0 - Production

    WITH construction is known as factoring request void.

    http://download.Oracle.com/docs/CD/E11882_01/server.112/e26088/statements_10002.htm#i2077142

    (Not easy to find unless you know what it's called)

    It allows you to start your request with a sub request which acts as a view definition that can then be used in your main query, just like any other view or a table.

    This example declares two views on the fly - master_data and detail_data, which are then used in the example query. Each query sub emulates the data in the table by selecting literal values in the dual table a line using union all to generate multiple lines.

    The two queries shows different results when an outer join is used in the second (+) {noformat} {noformat}

    SQL> -- test data
SQL> with
  2      master_data as
  3      (
  4      -- this query emulates the master data of a master detail query
  5      select 1 id, 'Header 1' description from dual union all
  6      select 2 id, 'Header 2' description from dual union all
  7      select 3 id, 'Header 3' description from dual union all
  8      select 4 id, 'Header 4' description from dual
  9      ),
 10      detail_data as
 11      (
 12      -- this query emulates the detail data of a master detail query
 13      select 1 id, 1 detail_id, 'Detail 1.1' description from dual union all
 14      select 1 id, 2 detail_id, 'Detail 1.2' description from dual union all
 15      select 1 id, 3 detail_id, 'Detail 1.3' description from dual union all
 16      select 2 id, 1 detail_id, 'Detail 2.1' description from dual union all
 17      select 2 id, 2 detail_id, 'Detail 2.2' description from dual union all
 18      select 2 id, 3 detail_id, 'Detail 2.3' description from dual union all
 19      select 2 id, 4 detail_id, 'Detail 2.4' description from dual union all
 20      select 4 id, 2 detail_id, 'Detail 4.2' description from dual union all
 21      select 4 id, 3 detail_id, 'Detail 4.3' description from dual
 22      )
 23  -- main query
 24  -- to select from test data
 25  select
 26      m.description,
 27      d.description
 28  from
 29      master_data m,
 30      detail_data d
 31  where
 32      m.id = d.id
 33  order by
 34      m.id,
 35      d.detail_id;

DESCRIPT DESCRIPTIO
-------- ----------
Header 1 Detail 1.1
Header 1 Detail 1.2
Header 1 Detail 1.3
Header 2 Detail 2.1
Header 2 Detail 2.2
Header 2 Detail 2.3
Header 2 Detail 2.4
Header 4 Detail 4.2
Header 4 Detail 4.3

9 rows selected.

SQL> edi
Wrote file afiedt.buf

  1  with
  2      master_data as
  3      (
  4      -- this query emulates the master data of a master detail query
  5      select 1 id, 'Header 1' description from dual union all
  6      select 2 id, 'Header 2' description from dual union all
  7      select 3 id, 'Header 3' description from dual union all
  8      select 4 id, 'Header 4' description from dual
  9      ),
 10      detail_data as
 11      (
 12      -- this query emulates the detail data of a master detail query
 13      select 1 id, 1 detail_id, 'Detail 1.1' description from dual union all
 14      select 1 id, 2 detail_id, 'Detail 1.2' description from dual union all
 15      select 1 id, 3 detail_id, 'Detail 1.3' description from dual union all
 16      select 2 id, 1 detail_id, 'Detail 2.1' description from dual union all
 17      select 2 id, 2 detail_id, 'Detail 2.2' description from dual union all
 18      select 2 id, 3 detail_id, 'Detail 2.3' description from dual union all
 19      select 2 id, 4 detail_id, 'Detail 2.4' description from dual union all
 20      select 4 id, 2 detail_id, 'Detail 4.2' description from dual union all
 21      select 4 id, 3 detail_id, 'Detail 4.3' description from dual
 22      )
 23  -- main query
 24  -- to select from test data
 25  select
 26      m.description,
 27      d.description
 28  from
 29      master_data m,
 30      detail_data d
 31  where
 32      m.id = d.id (+)
 33  order by
 34      m.id,
 35*     d.detail_id
SQL> /

DESCRIPT DESCRIPTIO
-------- ----------
Header 1 Detail 1.1
Header 1 Detail 1.2
Header 1 Detail 1.3
Header 2 Detail 2.1
Header 2 Detail 2.2
Header 2 Detail 2.3
Header 2 Detail 2.4
Header 3
Header 4 Detail 4.2
Header 4 Detail 4.3

10 rows selected.

  • The user equivalence test failed for user 'oracle '.

    Hello

    I try to install the Clusterware Oracle 10g as part of my RAC installation.
    I have configured in RHEL 4 to 2 nodes (rac and rac2). But when I run the runcluvfy utility, I get the error below:

    [oracle@rac cluvfy] $./runcluvfy.sh stage pre - crsinst - rac n, rac2
    Conducting due diligence to install cluster services
    Audit accessibility of node...
    Check for accessibility of node is passed node "rac".
    Verify the equivalence of the user...
    The user equivalence test failed for user 'oracle '.
    The test failed on the nodes:
    RAC
    CAUTION:
    Equivalence of the user is not defined for nodes:
    RAC
    Audit will proceed to nodes:
    Rac2

    The problem is that with the first node (rac). The second node passes.
    SSH works fine. Don't know what the problem is!

    Thank you!

    Have you set up SSH for the equivalence of the user?
    Or
    Did you establish the user equivalence?
    If Yes... Please check...
    $ ssh hostname rac
    RAC
    $ ssh hostname rac2
    Rac2
    You should establish the equivalence before user...
    exec/usr/bin/ssh-agent $SHELL
    / usr/bin/SSH-Add

    If you do not configure ssh for the equivalence of the user
    http://www.Oracle.com/technology/pub/articles/smiley_rac10g_install.html
    Or
    read the SSH user equivalence is not defined on the remote nodes

  • How to become a good user/punter in Labview & test bench

    Hi all

    Nice day!!!

    I recently started to use OR Test & Lab View.

    I want to know life scope of reviews and NO bench test & Lab, by learning from this what are companies we can only enter/work.

    How to become a gambler in these. Please do the needful.

    Kind regards

    Sivaprasad.CH

    Jigg, I liked your comment about how LabView and TestStand is spelled... lol... Although the word becomes crazy when you put TestStand and LabView for the first time if you add them to the dictionary lol...

    I also agree with Jigg on how LabView has several fields of expertise it is difficult to be good/expert in each of them.

    Is difficult to find a job of TestStand/LabView you 100% that. Usually, what I see is that companies also want to make you a hardware design and know how to ask a panel of the map above to simulate this on spice etc... then you'll do the tester also lol...

    If you join a small consulting company, you'll have for breakfast LabView, LabView for lunch and for dinner Labview and I bet you will learn a lot.

  • Beta-Tester required for Sierra?

    What should I be a beta tester for download Sierra?  I tried several times to download and still get a message that it failed.

    Second, how to register for the beta test?

    Thanks Barry

    Is there other information with the message that "failed"?

Maybe you are looking for