Test lab guide: set up an integrated Exchange and Lync laboratory to Test SharePoint question

Similar Questions

• setting up pop3 in exchange server 2003 service

  Hello

  I would like to configure the Exchange server pop3 service so that the user can access their emails outside my local network with their application to Ms outlook.

  Please help with the necessary configurations, I need to point users will be able to access their emails outside my LAN

  Thank you for visiting the Microsoft answers community site.

  The question you have posted is related to Exchange and would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Integration of MS Lync with telepresence

  Hello world. I have a question about the integration of MS Lync with telepresence. VCS - C will be sufficient for the integration with MS Lync server 2013? I heard that VCS gateway additional Lync is needed for this. And what about licensing, we need to activate the license of Microsoft on CV interoperability to make integration work?

  Would appreciate your responses.

  I would recommend that you read the deployment guide.

  http://www.Cisco.com/c/en/us/support/unified-communications/Telepresence...

  Please also search the forum, you will find several threads dealing with these issues.

  In short, the official way is to deploy a dedicated VCS - C or C-Expressway.

  But depending on the size and the friendly deployment you may have other options.

  If you want to have appropriate support, Yes, you would need the collaboration enhanced, now called

  Key to Microsoft Interoperability.

• Unable to add agents to Exchange and active directory fglam

  I'm having issues getting the announcement and exchanging cartridges to add new agents. The Exchange and the advertising agent package has been properly deployed. However, when you try to add and configure new agents, errors will prevent the installation of the future.

  I get the following error whenever I try to install Exchange followed 5.6.3.1 agent version.

  "Access error to the mydomain.com with the supplied user name and password: javax.naming.CommunicationException: mydomain.com:389 [root exception is java.net.ConnectException: Connection timed out: connect].

  I confirmed usernames are correct and work passwords and user account has access to connect to Exchange and to perform operations.

  I opened all the ports required by the installation docs and Foglight requirements. The network between the FMS and fglam boxes and Exchange are on opposite sides of a firewall.

  I fear that port 389 is not yet open, and I was wondering if anyone has experience with the exchange connection and agents of the AD through the firewall. If so, what has been your experience?

  Thank you

  A number of things I've noticed in the past:

  1 make sure that the machine/machine virtual fglam is running have enough memory for the fglam create agents.

  2. for AD and exchange please check the release notes for these agents, especially when AD/Exchange running on Windows 2008 R2, there are a lot of prerequisites to allow agents to collect data.

  3. If you did the pre requirements, I saw cases where it took a long time for the system to respond. In these cases what I usually do, is go to administration > dashboard status agent and change the properties of the agents. I give the connection timeout, a very high value (typically, I add a few zeros to the number that is there).

  In addition, if you check the edocs you will see both for AD and Exchange there is a troubleshooting section and a guide to diagnosis remotely.

  http://eDOCS.quest.com/Foglight/565/files/RemoteAccessDiagnostics_Guide.PDF

  There is also support solutions to talk about troubleshooting problems

  https://support.quest.com/SolutionDetail.aspx?ID=SOL76251&PR=Foglight

  https://support.quest.com/SolutionDetail.aspx?ID=SOL74226&PR=Foglight

  https://support.quest.com/SolutionDetail.aspx?ID=SOL70765&PR=Foglight

  If it still does not respond, please open a case of pension.

  Golan

• Extensions Exchange and Kuler, unable to connect costs to install CC products

  I just installed CC yesterday (PS, ID, I, PR, FL, DW, LR, AE, Exchange and a few others). After the success of the download and installation, nothing in the extensions Panel will load. Of course, I have that Kuler and Exchange at the moment but, no connects to any product. The product of Exchange will connect stay but the extension won't. Here is a screen-cap of the window. Any suggestions? I already checked the "allow the Exchange to connect" button is checked in all products.

  

  Hi djlotus,

  I got your email, but unfortunately there was no attached zip file.

  -The fact that your AdobeOnlineDefault registry value is set to 0 is most likely the problem.

  Set this value to 0 tells the Adobe Extensions to "do not connect to the Internet" - and 1 configuration allows extensions to connect to the Internet. It is very curious that this value is set to 0 in your registry - perhaps another extension on your machine previously set this property to 0 without intending to influence the other extensions. Can you try changing this value to 1, by restarting your computer and then by opening the Panel change once again?

  If it still does not work, try to send the newspapers for me and I'm going to continue the investigation.

  Thank you

  Fraser

• Flexible, set up including the tables and columns of text?

  I need to set up tables (annual report) and some text between the two notes.

  I would like to have frames as little as possible on every page - for InCopy workflow later.

  If I paste the text of the regular column in the frames containing the tables anchored that I must apply the shift of different basis for each block of anchor text, text which is not a nice workflow.

  Can you recommend a skillful means and flexible to set this place that will make the tables and text boxes flows if more lines or more text are added?

  Best regards

  Nina storm

  For this test I did it manually, but I have no reason to think that it would behave differently as part of a style. As far as I know, ID will attempt to balance the two columns automatically. If there is not enough text to divide into two columns it will not appear to divide but always see you any extra spacing and add just enough text to be wider than the column width of Courland and your line will have a gap in it for the gutter of the column.

  OK, I've just defined a style with the attribute of split, and Yes, it works in the same way. If you have a single paragraph, the paragraph is divided. If you have more than one, the block is divided, reading down by the first paragraph to the second (assuming that the linecounts work that way) in the first column before splitting into the second column. Paragraphs distributed individually. ID is to balance my columns automatically and will adjust the break if I edit, and if the number of rows is not divisible by 2 short column is on the right.

• I have an oval window on my desktop (Mac), which sets out everything I do and he's also very strong! Malware? Adware?

  I have an oval window on my desktop (Mac), which sets out everything I do and he's also very strong! Malware? Adware?

  If it looks like something like this, you have probably enabled VoiceOver.

  

• Is it safe to remove files from my macbook air now that I have set up my time capsule and backed up with time machine? My boot drive is full. How can I access files of my time capsule once they are deleted from my computer?

  Is it safe to remove files from my macbook air now that I have set up my time capsule and backed up with time machine? My boot drive is full. How can I access files of my time capsule once they are deleted from my computer?

  1 n ° put them on a regular external drive and the value of Time Machine to back up as well; the files you want to keep should be at least two disks in case one of them goes down.

  2. they will not be usable until the restoration.

  (140480)

• try to set up my mini iPad and it won't let me choose a network that no backup is compatible with the version of iOS on iPad (9.1)

  Try to set up my mini iPad and it won't let me choose a network that no backup is compatible with the version of iOS on iPad (9.1)

  kellycfromlosgatos wrote:

  Try to set up my mini iPad and it won't let me choose a network that no backup is compatible with the version of iOS on iPad (9.1)

  First talk you about selection of a network, and then say that there are no compatible backups. Do you have an older device? Having problems connecting to Wi - Fi, or restore a backup problems? If you had a device more former, is - it possible that this device had 9.2 on iOS? If Yes, then you will need configure the Mini iPad like new, update the iOS 9.1 to 9.2, and then you must use the settings > General > reset > erase all content and settings, to bring him back to the installation wizard. From there, you will be able to restore your previous backup.

• Set up connection VI start and stop without losing or deleting data

  Hello

  I currently use a PCI-6280 M-series and a card PCI-6601 of counter measurements on Labview 2010.

  I have 3 tasks implemented, 2 tasks of linear encoder on the 6601 counter and 1 analog input task with 4 inputs x on my 6280.  All of these are timed with a counter on the 6601 through a RTSI line.

  All of these tasks, I have a similar setup as the picture in http://zone.ni.com/devzone/cda/tut/p/id/9574 except that they are all set up as only "Log" and "create/replace" for the logging.vi configuration file.

  Because I want to have the encoders permanently locate my position, I never "stop" the tasks of meter.  However, I need to use the data acquired after each trip along the way to get and process location and subsequent analogue input data points I have.  What I did, I would be 'stop.vi' my clock on the counter sample, and then open the PDM file, read the file PDM, get the table from there, close the PDM file, then "run.vi" the clock on the counter sample.  However, I found when I stop the sample clock, not ALL data points have been listened to in the file.

  For example, say I move my cart to 100mm to the right during recording, then stop the sample clock, get the PDM file table, find the size of this table called 'X' for future use.  Then I get the ramasseherbe on the origin WITHOUT restarting the clock.  THEN I start the sample clock and move from 100mm to the left.  After that, I once again, stop the sample clock and get data from my file tdms starting at the offset of reading on "X + 1".  I EXPECT that this table SHOULD start at 0 then go to the 100 mm to the left.  However, what it does, is that I see the data begin at 100mm from the right for a few data points, then GOES to 0, then moves to the left as planned.

  I propose this means that when I stop the sample clock, data from meters (stamp?) not all were listened to the tdms file yet, and when I start the clock, the rest becomes she dumped.  Here, I'm confused because I thought that 'configure logging.vi' stream directly in the file without a buffer.

  I was wondering if I'm doing something wrong, wait bad things, and if there is a way to apply what I want.  As in, is there a way to dump data remaning in the "buffer" (I tried the tdms vi flower, but that didn't work and I didn't think it was relevant) after I stop the clock or something like that, or is my implementation to offshore competely.

  Thanks for reading,

  Lester

  PS. have a way to read the most recent point counters would be great also.  However, whenever I put the offset or relative to the most recent, it is said that I can't do during indexing, even if I saw a community post saying that it works with analog inputs.  This is perhaps off topic, but yes, now I'm just trying to get the tables of PDM works, thank YOU!

  
  

• Why Exchange and no Lotus notes?

  I used Outlook and Lotus notes.

  for centralized mailing lotus notes are good and cheaper so why use the exchange and no Lotus notes?

  Hello

  1. What is the exact problem you are facing with exchange?

  You can read the following article and check if it helps.

  By comparing the Lotus Notes and Microsoft Exchange

• Need help to set up officejet pro 8600 and scanning to the network on OSX Lion folder

  Hello

  I'm trying to implement my Officejet Pro 8600 more scan to a network under OSX Lion folder.  I have correctly set up the printer otherwise (and can scan and flown from my Mac).  I created SMB sharing as described in the documentation.  My only question is what to enter in the Web server of the printer when it asks for the network path of the shared folder.

  For example, I have the following shared folder:

  / Users/me/Documents/scans/Durable goods received

  on my computer that has name is:

  My iMac

  has an IP address:

  172.16.1.4

  wonder web server of the printer a network path (for example: \\mypc\sharedfolder) but I do not know how to translate my way above in the correct format.

  I tried the following:

  AFP://172.16.1.4//users/me/documents/scans/durable------Goods\ recipes

  but he doesn't like it.

  I also tried:

  Recipes of \\172.16.1.4\Users\bvz\Documents\scans\Durable of goods.

  Nothing helps.

  Thanks for any help or ideas!

  Hello

  First of all, make sure to install the latest firmware for the printer.

  SMBX (used by Lion sharing protocol) support added lately, and the device fails to access any forlder Lion shared with an older FW version:

  http://support.HP.com/us-en/document/c02919168

  You have shared the folder durable goods received ?

  If so, I guess the correct path would be as follows:

  \\172.16.1.4\Durable goods received

  Please let me know of any changes,

  Shlomi

• How can I set the default font size and type for the outgoing Hotmail mail?

  How can I set the default font size and type for the outgoing Hotmail mail?

  Hi Dale,

  What is the email client do you use?

  Outlook can be configured per - start Outlook-> Tools-> Options-> mail-> fixed Format and fonts... Select the font and size you need... Click ok on all screens.

  I hope this helps.

• Windows vista update 3 of 3 will not set up, computer continuously, stop and restart; Unable to access computer

  Windows vista update 3 of 3 will not set up, computer continuously, stop and restart; Unable to access computer

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  04:17:0407/17/11

• How to set an IP address manually and manual DNS servers for my printer HP Photosmart 7525?

  Cannot print.  EU of evil when the printer was initially put in place.  "Happytohelp01" Assstance solved the advised me; a manual IP address unBalayage DNS servers for the printer.  I did not write the information and now my printer is not working (it only worked for about a month), now nada.  I've had at the start of the connection to the web server problems - now its doing the same thing, but I don't know what IP Address and DNS to use.  Please help if you can.

  Hi @LaceyNo1,

  Welcome to the HP Forums!

  I understand that you are wondering, how to set an IP address manually and manual DNS servers for your printer HP Photosmart 7525. I am pleased to see that for you!

  After some research, I think I found the post, my colleague @happytohelp01, helped you with. In this post, Re: Photosmart 7525.

  Hope this is what you are looking for and have a good day!