Test MessageListener
Hey guys,.
I'm writing a SMS listener for the blackbery using MessageListener. The code I use is from this page. The question I have is that I'm unaware of an appropriate way to test this. Because I am not allowed to run two simulators at the same time I can't simulate sending an SMS. Now, I'm sure that there is a way to make it so I came for the experts!
I'm doing my development using the Eclipse Plugin of the RIM. If you need more information, I would be happy to provide it.
-Fnab
OK, if your current running on the same localhost, you must use the following command
NC u 127.0.0.1 4000<>
Before that, run a nestat to ensure you port 4000 is listening.
BTW, udp nc stop normally. Its normal.
Good luck
Tags: BlackBerry Developers
Similar Questions
-
I just enjoy the three-month trial. Does include the free downloading of music?
Yes, but once the trial is over, you must be a paid member to play any music that you have downloaded through the test.
(145150)
-
Is it possible to run a diagnostic on my MacBook Pro to determine if my RAM slot is bad, I was told one of the slots is burned and were released on a single.
-
I have an iphone 6. The ringtone does not make a noise. I tested the ringtone and it sounds however when I receive a call or text or email, the Bell is silent
Hello Jimmy10 66,
Thank you for reaching out to the Community Support from Apple. I know how it is important to follow your alerts, and I want to help you get your work again.
Before we get too far, it's always a good idea to check that your 'secret' button just above your volume controls is not engaged. If you see that the yellow indicator go ahead and switch to the other position to turn it off.
Alternatively, you can drag up from the bottom of the screen and make sure that the control of "do not disturb" is disabled.
If those who are for the time off, go ahead and restart your phone and retest alerts. If the behaviour continues or if you encounter any problems, please reach out again and let the community know what other steps you have tried. The entire community is here to help.
Best regards
-
Site XFINITY Speed Test, no results.
I'm going on the XFINITY Speed Test site and try to get my test results, but start the speed Test does not appear? I used this site many times in the past.
Could be a cookie problem.
If you use Safari...
Go to the Safari menu bar, click Safari > Preferences then select the Privacy tab, then click on: Marches site Data , and then click remove all.
Then quit and relaunch Safari and try again > http://speedtest.xfinity.com/
I just tried the test and it works fine for me on Safari 10.0.
If the deletion of cookies did not help, make sure that Flash is up to date.
Open system preferences > Flash Player, click the updates tab, and then click: check now
-
Beta-Tester required for Sierra?
What should I be a beta tester for download Sierra? I tried several times to download and still get a message that it failed.
Second, how to register for the beta test?
Thanks Barry
Is there other information with the message that "failed"?
-
Since the update to the latest version of Safari, I was not able to access beta.speedtest.net by OOKLA (the no flash version). I can access it using my Macintosh plus former 10.5.8 running, but does not on my iMac running 10.11.6 with Safari 10.
All attempts to enter this URL returns the speedtest.net (flash version).
Anyone know this problem?
I tried to clear my memory cache of Safari and flushing the DNS cache, but still no joy.
.. .a update.
I was able to successfully run the other speed tests no flash with Safari 10 (e.g., Verizon and other speed test), but trying to access beta.speedtest.net, I'm automatically redirected to the flash-based OOKLA test.
-
updated to ios 10.0.1 and now when I run the conectivity test my pc can't find my iphone so I'm not able to back up or synchronize it with my pc. everytime I connect my phone to my PC the pc revealed the companion phone which is no use to me as I want to get back to the top of my IPhone and syncing old content like movies without having to use my wireless
You have restarted your computer?
If iTunes does not recognize your iPhone, iPad or iPod - https://support.apple.com/HT204095
Device are not not immediately after the upgrade - https://discussions.apple.com/thread/6573744 - try to restart
Make sure you use the original or a spare cord Apple. Some third-party cables transfer that power and no data signal.apple.com/message/28002758#28002758
https://discussions.apple.com/message/29154537#29154537 - removed then reinstalled iTunes application
July 2016 Lawrence_Finch post - https://discussions.apple.com/message/30402529#message30402529 - connection dirty?
-
How to become a product tester Apple?
Samsung wonder test and review, they are produced to my 2 million subscribers and I am a person of apple. They want to prove they are better and I want to prove that apple is better so is there a way Apple could send me one of the products out there to via samsung rule? Hope to talk to you soon from apple.
It is a forum for technical support of users supported. If you wish to contact Apple, information is available on the link in the lower right corner of this web page contact us.
BTW, to my knowledge, that apple doesn't send material of public trials. They do it all the internal product tests. The sites you see looking at Apple products purchased these devices themselves, as part of the cost of the execution of an advertising review site or business
-
App - test available, you can keep track of the health
Is there anyway to add a new test that you want to keep track of the application? Some test results important for certain medical contains are not available, and I want to add and then on my dashboard.
Thanks for the help!
No, not for the moment.
Comment asking this feature here:
-
model of iMac end 2013 13.2
I7 to 3.4 Ghz
32 GB OF RAM
OS X El Capitan
Hi all
Just did a test of hardware on my iMac computer and the test revealed an ERROR with the code below;
4MEM / 60 / 40000000: 0X8075F390
Can someone tell what means this error code?
Thanks in advance!
Seems that one chip memory, your machine must be
four of the chips of RAM, may be defective or not standard.
Memory maximum 32 GB
Slots memory 4-204-pin PC3-12800 (1600 MHz) DDR3 SO-DIMM
• Installation of memory in an iMac - Apple Support
If you went from the memory of the original stock, you might come back to the
such configuration delivered to test.
Good luck!
-
This procedure is a diagnostic test.
The question how to delete this file EtreCheck found:
~/Library/LaunchAgents/com. [email protected]-SharedServices.Agent.plist
/System/Library/frameworks/CoreServices.framework/frameworks/OSServices.framewo rk/Versions/A/support/CSConfigDotMacCert - /Users/GeoffreyMcCabe/Library/Logs/[email protected]- SharedServices.log u l @me.com SharedServices s t
Search me has led to an older discussion-"this procedure is a diagnostic test"...
I ran the test recommended in the Terminal, but this window says there are invalid characters...
Are there any alternatives to the procedure or updates?
Thank you...
Open your library folder of the user by holding down the Option key and selecting the library from the menu go to the Finder.
Find the LaunchAgents folder and open it.
Search for the file with the same name as on the Etrecheck and delete it.
-
How do you add the test results in the application of the health data?
I had a medical test yesterday, and I want to keep a record of the results.
I want also to a record running of my blood pressure, pulse and hemoglobin, I take each week.
Hello
To add data manually, open the application health and go to: data on health (tab) > choose a category (or select all) > tap on a data type (for example, blood pressure) > add a data Point > add your data.
-
I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to get a screen tested on it because she does not have the person had not on is it did not work, even if the person has used only flow to correct and get a few corosions out with the replacement of some components of the person responsible for 10 minutes after having plugged in and the battery it wamer so it as I said her test with a multi meter test and he registered 12v and I wondered if something was wrong with it and if I could fix it easily?
Check the liquid Indcator of Contact.
Instructions here > liquid for iPhone or iPod is not covered by the warranty - Apple support
Just so you know, the service of the liquid damage to an iPhone or iPod is not covered by the limited warranty of one Apple or an AppleCare Protection Plan (APP).
-
I tried to put it on my iPod today and instead got this message. I could not get out of the screen that says
Please wait
Run: BL on
Pass: Blink BL
Fails: B: off
Reset to continue
I have an iPod classic. I don't want to plug it into my computer because it was hacked this week and I need hackers to spoil my iPod and my computer.
Thank you
It would seem that you have managed to get the camera in diagnosis mode, may be performed automatically. A reset (hold MENU + SELECT for 6 seconds) you should get out of it. See also corrupt iPod Classic to learn how to run manual tests useful while you're there.
TT2
Maybe you are looking for
-
Instructions not clear for erasure of data from the app
The mode of deleting the data from an application say go to settings-> general-> storage & use Icloud-> Manage storage (under storage)-> select app-> then choose Edit in the upper left corner. I am running the latest version of the software and I do
-
Satellite C660D - 15 X - overheating and slow
My Toshiba C660D became very slow responding to orders. The fan is constantly on. I downloaded SpeedFan app and it shows the GPU at 81 degrees Celsius and 80 Core... All the updates installed to date. I thought that maybe it's a few problems with the
-
WRT120N allows 255.0.0.0 subnet?
I have currently a network using IP 10.1.x.x and 10.2.x.x and 10.3.x.x with a 255.0.0.0 subnet, I bought 2 of wrt120n wireless routers to test and find that I can't use the 255.0.0.0 subnet someone has tried this or have I missed something?
-
Router WRT54G3G-ST - no internet connection - cannot reset the router
Hello. Some longer story certainly not short (I apologize for the length of hiking... I don't know what is and isn't important, will scan, please... I'm sorry...) : recently my computer (Dell XPS 400, Windows XP Service Pack 3, Internet Explorer 7
-
Windows 7 64-bit. Recently switched to the screen. I used resolution with 125% and visible taskbar, then move on to 100% and hidden taskbar because some things don't completely showing on the screen. Not a novice. I use Comcast XFINITY to my mail