Test UUT and SIngle Pass disappeared during deployment

Similar Questions

• single-pass status banner

  is there a good reason why the status of "Pass/fail" banner is not displayed in mode 'single pass '?

  There is a prerequisite to UUT post - step banner of status, check whether it is 'Test DUT' or 'Single Pass '.

  Is it possible to display the banner without changing the model, but using a tp reminder post use more or less?

  BR

  Nikolaj

  Hi Nickolaj,

  Are what version of TestStand you?

  A good reason? Probably, but I'm only guessing: Historically, the two process (dating back to TestStand 1.0) model entry points are designed for two types of tests. Test loop, for what I like to think is for tests 'widgets' and unique performance tests, w / popups of process model minimum for running the test using test data entries by default once.

  In v4.2.1 TestStand, they run as described above, but do not include the same reminders. Because the only crossing has no PreUUTLoop, PreUUT, PostUUT and PostUUTLoop callbacks, you can't easily the banner to appear. To display the PostUUT Single Pass would need to have the recall of PostUUT added to it. Also, there are no prerequisites to which entry Point is used on this version.

  IN TestStand 2013 (and no doubt 2010 and newer) has changed the process templates and Single Pass has a call to the PostUUT callback. As this seems to be what you use, you can override this in your test, the copy of the sequence of DoPostUUT and sequence, and change the reminder copied for use your version of DoPostUUT, but change your to remove/change the prerequisites to your liking.

  I hope this helps.

  -Jack

• can I add a serial number to a single pass selected to the test

  Hi, I have a number of tips that I test which are marginal passes or marginal failures and wish I could re - test failures by running the test steps pass / single selected and adding the result to the map existing under the same serial number result of UUT (unfortunately the test together take 20 minutes so it would be much faster I could re - test just the test that failed).

  I know that you can add results under the same serial number, but don't know if you can add a single test to this same result.

  At least, it would be good that I was able to store the individual result by using the serial number of the object to measure

  Thank you

  Chris

  Thanks, that's great.

• HP Envy M6 1125dx running Windows 8.1 and my fingerprint reader/single pass does not work

  Hello

  I'm not able to use my finger print reader/single pass, now that I've downloaded windows 8.1

  Read a few other questions and difficulties people exercise but were not able to always operate.

  I have a HP Envy M6 1125dx

  00179 60246-20486-AA0EM

  64-bit Intel Core i5

  Running Windows 8.1

  Thank you

  Hi Ricksd,

  Welcome to the HP Forum.

  If you still have an old driver Validity Sensor in your system, you may need to upgrade to one that supports 8.1:

  sp58869 validity sensor V4.4.234.0 Win8

  If you still use an older version of the HP SimplePass software, you may need to upgrade the program.

  If you have recently upgraded to 8.1 Windows, make sure that all of your Windows updates are up-to-date.

  If everything is already at the level of the correct version, then you can get away with just reset the drivers:

  • Close all your programs and shut down your computer
  • Unplug everything (little unifying for the keyboard / mouse external can stay)
  • Perform the Hard Reset for your laptop
  • Start the computer and connect

  If the Hard Reset does not help,

  so check out this guide for advice on how to relax program in order:

  Simple Instructions for upgrade HP SimplePass

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

  Dragon Tip: Export your SimplePass Webcards!

• Creative Cloud Desktop manager and application manager Adobe disappeared during some sort of update. Tried to uninstall and reinstall creative clouds (received the message I needed to App Manager). Tried to install App Manager (got the message, I needed c

  Creative Cloud Desktop manager and application manager Adobe disappeared during some sort of update. Tried to uninstall and reinstall creative clouds (received the message I needed to App Manager). Tried to install App Manager (got the message, I needed creative cloud). Tried Cleanup tool for CC and CS6. Always impossible to install CC desktop manager or Adobe Applications Manager. Running on Mac, Yosemite 10.10.3.

  See the link below:

  Of nowhere, cloud Creative works not

• Differences in the ResultList after Run vs Single Pass?

  I noticed that if I run MainSequence instead of Single Pass, limits and model are missing in the ResultList. What is the reasoning behind this?

  Is it possible to connect the limits and the same comp after MainSequence run?

  In the end, I would right-click on an individual sous-suite and run it, but this does not seem to record limits and Comp, I need for a data record personalized VI.

  Thanks for any input in advance.

  This happens because the models call Initialize execution Entry Point to ModelSupport.seq. To include in the results and the Type of comparison include in outcome measures during this call of the Execution.AddExtraResult sequence to ensure that these data appear in the result list even if they are not resident in the result property.

  If you copy these steps to your main sequence, it should work.

• Single-pass does not work for Web sites after the last update of firefox

  Single-pass does not work for Web sites after the last update of firefox. This works in IE and Chrome and it works under windows (when starting the computer), but not with any website in Firefox.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to SimplePass, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the control on the right side of the SimplePass.

  You may need to exit Firefox and start it again before it takes effect.

  A little luck?

• How a shared single process variable be FIFO and single element?

  How a variable shared unique process can we both FIFO and the only element at the same time?

  I read the NOR recommended for communication between a loop deterministic and non-deterministic loop.  He is said to use SVariable ingle-process Shared FIFO and single element.  OK I can't have something... because in my mind these two things must be mutually exclusive.  How do you have a single item 1?

  

  What 'RT FIFO activé' means, that when you use the variables shared in a timed loop it actually is written to a RT FIFO created automatically.

  The key here is that generally shared variables are shared resources and can add jitter to deterministic tasks if another loop uses the variable at the same time as your loop of deterministic.

  So here's the takeaway, when shared with RT FIFO active Variables using:

  • Normal loops read and write the shared variable in the same way as they always do.
  
  
  • Call loops read and write a FIFO RT rather
  
  
  • The data is automatically passed between the RT FIFOs and shared in a nondeterministic loop variable

  RT FIFOs exist because their architecture referred to as non-blocking so that when the timed loop trying to access it is guaranteed immediate access to a memory space.

  Does that answer your question?

• Hardware diagnostics: "SMART short Self Test - failed" and "targeted read Test Failed.

  Original title: "SMART short Self Test - failed" and "targeted read Test Failed", all the patches?

  When using PC checkup of Dell I get the following errors; during the analysis of the material. "SMART short self-test - failed" and "targeted read Test Failed", all the patches?

  Hello Duane,

  Teke section of the Web site that speaks of similar problem.

  http://forums.techguy.org/hardware/906455-smart-short-self-test-fail.html

  The problem is with the hardware and you can get in touch with Dell computers.

• Minimize, maximize and close button disappears

  For some reason any him minimize, maximize and close buttons disappear on top of my windows. This happens for all applications. The buttons are not visible, but they still work. For example, if I click on the top right of the application, the application will close.

  I don't know what the cause. Sometimes right after that I started my PC. Sometimes he does not occur for more than an hour. I tried to detect the reason, but I couldn't.

  I surfed on the internet trying to find a solution, but could not find something that works (they often speak of nvidia drivers, but it is not a nvidia driver in my laptop).

  Does anyone have a solution for this problem?

  First to try all the findout if this is related to any recent changes you've done on the machine.

  These rendering problems may occur due to display driver? Try Inbox driver if you have installed an additional driver for the graphics card.

  Do you see the same problem in safe mode or safe mode with networking?

  Using AERO? If so, disable AERO help?

  Try to disable all third parties using shellexview shell extensions and test. http://www.NirSoft.NET/utils/shexview.html

  If you are not using the default windows theme change 7 that him and test?

• Error 25004 config.xml not specified as a configuration xml file is valid must be created during deployment (null)

  Error 25004 config.xml not specified as a configuration xml file is valid must be created during deployment (null)

  Hello niecy1963,

  Thanks for posting on the Microsoft answers Forum.

  If you get this error when you try to install Office 2007, then be sure that you have uninstalled the trial versions of Office from your computer.
  It may be a software problem with an uninstall of Office add-in Microsoft any component snap-in via the control panel. Reset. Then you can reinstall the add-in.

  You can also follow the article below for assistance.
  KB Article ID: 928218 -how do I uninstall manually Office system 2007 if you cannot uninstall it by using the function "Add or Remove Programs".

  If you experience this error with another program and not Office 2007, with more details please reply and we will be happy to help.

  If please give an update and let us know your status.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Installer of creative cloud disappears during installation

  I got creative cloud and on the update, most of the applications went along with the icon on the desktop.

  I tried to reinstall the creative - but just clouds, it stops at halfway and disappears during the installation.

  I tried installing safe mode

  Ive renamed folders OOBE in the two libraries

  I tried the adobe application manager and crashes during installation

  I tried Adobe Cleanup tool

  Nothing is seeking a creative cloud to reinstall on the computer - I have lost about 4 creative cloud applications

  Work on a Mac - OS from Yosemite

  Hello!  The cleaner failed--simply couldn't detect the products creative of cloud. (He found an installation previous cs6, long since uninstalled, actually).

  Has not had the chance to try the ROOT, as a technician in Adobe (ahamed) remote in and made a few corrections of "known"... basically he cleaned the failed to install Office CC (deleted a few files) - then gave the permissions "wide open" to a couple of sets of folders in the library (one for the machine) and one for the user. I think they were

  / Library/application support of /.

  / Library/application support/Adobe /.

  /Users/ [username] / library/application support of /.

  /Users/ [username] / library/application support/Adobe /.

  Still could not install Office CC, (not twice!) BUT at least allowed the installation of "Adobe App Manager" - who was later TRANSFORMED into Office CC. Something of a workaround smart if you ask me!

  And now its all working OK again.

  I'm a little bothered by the little Cavalier ""Everybody"permissions apply to folders in the library, but if I understand correctly what are the quick fix when no one quite knows what the Devil's going on with the permissions...» (I guess access ROOT gives much the same effect for facilities)

• With photoshop 2014 cc 2.0 in edit, fill, pattern, script, I get only 6 options. Trees and executives have disappeared.

  With photoshop 2014 cc 2.0 in edit, fill, pattern, script, I get only 6 options. Trees and executives have disappeared and I only get the filling of symmetry, filling of brick, cross weave, place along the path, random fill and spiral. This is normal or is my corrupted photoshop version?

  options are passed to the FILTER - RENDERED

• How to export a H264 video with 2 audio conversion and Wave passes?

  "QuickTime" format allows you to export a H264 with audio wave, but with a single pass conversion.

  "H264" format allows you to choose the compression of VBR 2 pass, but force you to use the AAC codec for audio.

  Is it possible to export a video using the H264 codec with a 2-Pass VBR compression, without compressing the audio?

  OK, what is the way to lose the black bars?

  So far, the best solution I've found is to create an MKV to H264 video created with first and the wave of 24-bit with ProTools. I think I'll stay with it, but if you can suggest something better...

• Compiling jsx to jsxbin, Palette disappears during the race

  Hello world

  My ID version is CS5, I added # targetengine "session."

  I compile jsx to jsxbin, but the palette disappears during the race.

  Anyone can tell me the reason?

  Thank you.

  Best regards

  Goldbridge

  You can wrap the content of jsxbin inside app.doScript () routine and add engine target in front of her.

  

  Hope that helps.

  --

  Marijan (tomaxxi)

  http://tomaxxi.com