TestStand 2012, BatchModel treatment of intermittent problems result.

During execution of the BatchModel results are supposed to be going to separate directories for each Socket.  What we see is that intermittently, the path is not correct for a few shots, that is to say the results for a socket will be written to the badly taken directory.

What could be cause the shells to the incorrect path generator?

To obtain the path and the following file names has been added to USE Start, in NI_ReportGenerator.seq:

Parameters.ModelPlugin.PluginSpecific.Options.ReportFileBatchModelExpression = ""-"-... \\\Data\\\"+ Parameters.UUT.ModuleType + "-" + StationGlobals.JSFPNR.TestType + (Parameters.UUT.ModuleType == ""?) "" " (Reports\\\":"\\\Reports\\\") + Parameters.UUT.SerialNumber +" \ "+ Parameters.UUT.ModuleType +"[] - TR2_ _MSN"+ StationGlobals.JSFPNR.TestType +" _PN ["+ Locals.UUT.PartNumber +"] [] []. " \"",

Parameters.ModelPlugin.PluginSpecific.Options.BatchFileBatchModelExpression = ""-"-... \\\Data\\\"+ Parameters.UUT.ModuleType + (Parameters.UUT.ModuleType == ""?) " (Reports\\\":"\\\Reports\\\") +" BatchReport [] []. " \""

You can insert steps Lock acquire and release the lock "TestStand - determine report File Path Mutex" around the stage that you added AND current steps of determination of file report so that the report expression file values are not changed by a power outlet while being still used by another taken?

Lock: Acquire 'TestStand - determine the report queue Path Mutex'

Lock: Open early 'TestStand - determine the report queue Path Mutex'

Tags: NI Software

Similar Questions

  • TestStand 2012 launch problem

    Hello

    I have an annoying problem with TestStand 2012. Whenever I run the TestStand application a Visual Studio 2010 Shell dialog box appears "invalid license data. Reinstall is required. ». I have no Visual Studio is installed and I've ever had. I certainly never enter any license key. The same dialog box appears when you launch Version TestStand selector.

    I am running Windows 7 Professional 64-bit SP1. Only Microsoft that's installed products are SQL Server Express 2012 and the .NET Framework 4 Runtime. I tried to reinstall times TestStand and .NET Framework always the same dialog box that appears. If I just press "Close" in the dialog box, everything works fine, but really annoying needing to do.

    Someone at - he seen this before and have a solution?

    Thank you

    Mattias

    Mattias_Ericsson wrote:

    Hello

    Well, could work, but I really think that NEITHER should solve this problem properly. I am sure that many will have this problem more as SQL Server 2012 is becoming more common now.

    Thanks for your efforts in trying to help.

    Mattias

    This question, I recorded it in our tracking database. It will probably be addressed in a future release. You might want to try to install Visual Studio 2010 Express (I think it's a free download from Microsoft), or the alternative, I suggested.

    -Doug

  • The location of the file TestStand 2012 report variable

    Hello

    TestStand 2010 SP1, I have the "path to the report file' as one of the column in the database by using the RunState.Report.Location.  He worked until I upgraded to TestStand 2012.  The RunState.Report.Location is always empty.  I also tried to use the RunState.Root.Locals.ReportFilePath, but I get an error that it is an unknown variable when you connect to the database.  Even to remove the in the expression of path of file below, there is no difference.

    I use the following report file path expression:

    "C:\\TSReports\\------_Report [] [] [USE]" _.".

    Which variable contains the path of the report file in TestStand 2012.

    I have not tried, but RunState.Report.Location can work if you set the new discussion of the report and the database on False (assuming that the report is the first in the list) so you can be sure that the report was generated before you check this value.

    You must set set it up > result treatment > show more Options to see the options for new discussion.

    This should give access to the report path is displayed (the one with the check mark in the display column). However, in TS 2012, you can have any number of reports.

    There is a new recall, GetReportFilePath, you can add to your sequences to get the paths of the report they are committed. You can store the paths in a total station or varying lengths for use later, if necessary.

  • TestStand 2012 keeps the value of the variable

    I have a problem with TestStand 2012 that preserves the value of the variable. I have a step and its parameters in the string variable. I use the expression step as Step.Settings += "00". I run the sequence under sequential model and the problem is that Step.Settings is equal to "00" on the first run, '0000' on the second throw, '000000' on the third race and so forth, but it must rest '00' on each race. I can't find the root cause. Anyone has the same problem and can advice how to solve?

    Try to uncheck the properties of the sequence > optimize reentrant calls to this sequence to the sequence that contains the step.

  • iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

    Hello!

    My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

    Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

    What could be?

    Please help me!

    4ntoine

    Here is my model of iMac:

    iMac 27 "mid-2011 model 12.2

    Intel Core i7 3.4 GHz

    AMD Radeon HD 6970M 1024 MB

    OS X El Capitan 10.11.6
    SMC 1.72f2

    Boot ROM IM121.0047.B23

    reset the SMC

    Reset the management system (SCM) controller on your Mac - Apple Support

  • I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. Update

    I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. -Update

    1 iphoto sees not iphone - restart

    2 iphoto sees iphone but says "no pictures" - restart

    3 Iphoto sees phone and photos and I click Import all or import selected - then I have problem of file format and nothing is imported

    NOTE: I have similar problems with image capture - sometimes you can see the phone and photos, and sometimes is not

    I have an imac 2015 - execution of yosemite

    Help my new iphone because 7 is coming today and I am terrified of the transfer.

    Not sure, but in any case iPhoto is a dead - it would be really smart to learn pictures (a totally new and different program with a learning curve and different workflows)

    With the help of pictures with my new iPhone 7 and iCloud photo library all works well without any problem - nothing different photos with my iPhone except the news and the best quality Photos 5

    LN

  • intermittent problems / macbook air 2015 250 GB/8 G RAM / Yosemite 10.11.5

    Hello world

    I have intermittent starting problems. Technician at the shop said that it is important to reproduce the problem so that they can provide recommendations for repair. This mac is still under warranty and if I want to do the repair, it must be respected, that is me being left without a computer for a few weeks. I tried several steps to solve and I'm not sure if it has been set of troubleshooting. Please see below for details.

    13 July: tried to turn heard chimes, seen... progress bar on the mac, the computer stops

    • -restart the mac, called logo appears and it stops.
    • -J' tried reset SMC, it was answered, rebooted the mac, apple logo appears and it stops.
    • -WAITED 15 minutes, on the mac, it was completely start-up, but it stops after 10 minutes.

    I went to the Apple repair center, controlling material by staff and it happened, reset the ESCM and LANDAU. For some reason, we couldn't reproduce the problem. It has worked well.

    August 4: turn on the mac, punt managed could connect po... then he froze.

    • -made the hard reset, it fully charged, but it froze when I tried to log in
    • -did the reset once again, he lit. Clicking on my avatar, can you stop
    • – on return, he showed dashes flashing on the left side of the screen

    • -a tried to turn it back on, it showed the folder flashing with an exclamation mark.
    • -Restart the mac twice, but it showed the same thing.
    • -For access to the I tried the recovery disk, but it was inaccessible.

    I went to the apple repair center, he showed the foder flashing with an exclamation mark. They tried to test the material (they have connected a cable to test), but the computer has failed. The technician said it's dead. I went home and did not want to send my mac for repair coz I was on a business trip.

    August 5 - tried to turn back, until I did the reset SMC and he responded.

    • -He was able to start successfully, and he was able to log in. 15 minutes later, he stopped.
    • -Fact reset the PRAM and resetting the SMC
    • -in turn, and it has functioned and somehow solved the problem.

    Now August 6, it still works very well, I ran the diagnostic Apple and it didn't find any hardware failure or display errors.

    I don't know what to do. My mac is under warranty, but I couldn't replicate the problem and I'm not sure if it's a hardware or software problem. The technician at the apple Center said that it is better to reproduce the problem and observe the mac. I can't afford to be left without my cell phone. t

    I installed the most recent application is the Vmware fusion (24 May), which is something I rarely use.

    Hi Dabmeister, intermittent problems are difficult to diagnose.

    As a first step, I suggest to use the Combo Update 10.11.6 to replace any system software that is corrupt.

    https://support.Apple.com/downloads/MacOS

    The Combo update is a complete installation, as opposed to an incremental "delta" update, so you have to overwrite all files are damaged or missing. It does not matter if you have previously applied. All your data and settings must be kept, but that said, you should always have a backup.

  • Cannot start TestSTand 2012

    I can't start TestStand 2012. I get this error.

    I am administrator on my machine.

    Tteststand 2012 was the only instalation I

    Reinstalled .net framework 4.0 full.

    Reinstalled teststand 2012

    At TS2014, it works

    Switched back to 2012 through the picker version TS-> always the same error

    I can reproduce this error by manually editing the contents of a file of Type palletes.


                                
                                    
                                        <--------------- changed="" this="" to="" another="" value="" and="" the="" error="">

    .................

  • Using intermittent problems "invoke the node-&gt; default reset" command to delete a table

    I use the 'default' reinitalization invoke the node to clear a table after sending the data to a file. The next time that the vi is called the table should appear all items, set the default values. However sometimes the picture is not deleted and data since the previous call of the vi are still in the arrary, or at least it appears that way, since the same data for the previous time called appear in the file when new values are added to the file. New data looks good, as the data points in the table that I don't update appear with the old values. And again, it is an intermittent problem. I can solve this problem for a while in any case stop labview and re-run it.  Any ideas what's happening?

    Thank you.

    Chuck


  • HP Color LaserJet CP2025: Intermittent problem with printer producing pink wide unslightly strips

    I use a HP ColorLaserJet CP2015.  From time to time he overprinted documents with pink ribbons which is unslightly.  The documents can be used only for use in-house.

    It is an intermittent problem and may occur as early as the beginning of printing or begin in the middle of a print job.

    I ran a diagnostic report, but I do not know how to interpret it.

    Any suggestions?

    Thank you

    Alan

    P.S. I'm sure that the printer is out of warranty.

    Just thought that I'll let you know that so far I did not have pink wide overprinting.  It seems that it was a faulty cartridge.  Thank you very much. I would not have thought this.

  • It is an intermittent problem, as the excellent files, powerpoint will corrupt network drive.

    It is an intermittent problem, as the excellent files, powerpoint will corrupt network drive. Any help will be much appreciated.

    To avoid this, I'm making sure that files are not left open so much because we run backup incremental three times in a week.

    Files is not very high - about - 2 MB

    Some screenshots are inserted

    Thank you

    Amit

    http://answers.Microsoft.com/en-us/Office/Forum/office_xp-Excel?tab=unanswered&TM=1373425932359

    above is office xp, excel forum you might be better off poster in this forum that many people are familiar with excel and powerpoint.

  • Intermittent problem with IE8

    Using XP Prof SP3. When the computer is turned on for a while IE8 does not connect with the router. Firefox, Outlook and other programs work OK. If I reboot computer IE8 OK still once, after maybe an hour or two of IE8 doesn't is not the same problem came back

    Hi Sean,.

    I see you have some intermittent problems with internet Explorer 8. I'll help you with this problem.

    1. What is the brand and model of the computer?

    2. what security software is installed on the computer?

    3. have you made changes on the computer recently?

    4. What is the brand and model of the router?

    Method 1.

    How to troubleshoot possible causes of problems of Internet access in Windows XP: http://support.microsoft.com/kb/314095

    Method 2.

    Wired and wireless network problems: http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab2

    Method 3.

    You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

    Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

    Let us know if you need assistance with any windows problem. We will be happy to help you.

  • Updates KB2518864, KB2633880, KB2572073 downloaded several times on 22/05/2012. Is this a problem?

    Updated KB2518864, KB2633880, KB2572073 installed 3 times on 22/05/2012. Is there a problem with that or is this normal to leave it alone?

    Hi ChristineBurda,

    1. are you able to correctly install the other updates?

    2. have you done any hardware changes or software on your computer before this problem?

    This problem occurs when one of the following conditions is true:

    (a) an error has occurred during installation. The update has not been installed.

    (b) the update has been installed. However, a file was not updated to restart the computer.

    You can follow this link & check if it helps:

    Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

    Hope the helps of information.

  • My new copy of Quickbooks Pro 2012 seems to have a problem of compatibility with Explorer 9

    My new copy of Quickbooks Pro 2012 seems to have a problem of compatibility with Explorer 9.  If anyone has experienced this problem and do you know a solution?

    Hello
     
    What is the full error message?
    The average while you can also contact QuickBooks for additional help.
  • LAN printer prints not - need to remove and add another printer to obtain a paper copy. Intermittent problem.

    LAN printer prints not - need to remove and add another printer to obtain a paper copy. Intermittent problem.

    http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

    Have a read of the link above re Vista file and printer sharing.

    Permissions/Share info is there as well.

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for

  • Server settings fail but work elsewhere

    I tried to get Thunderbird to work on Windows 7 for a few weeks now (not continuous, but I've tried several times during this period.) He said: it could not find the server settings. All parameters to be entered are correct (and checked dozens of tim

  • 12 Firefox guard start full screen mode.

    Since upgrading to Firefox 12, he wants to start full screen mode. I don't want to say extreme full screen mode where even the menu bar is hidden. I mean the most "typical" full screen mode where it just gets as large as possible, but has the same co

  • Pavilion Gaming 15-Ak007tx: supported size M.2 SSD for Pavilion 15 game?

    As the subject says, what size of m2 is supported?

  • NEVER, received WIDOWS updates

    HELLO, I have "WINDOWS VISTA HOME PREMIUM". A Presario, HP 2GIG Desktop.I have not tried anything yet, because I'm not a pro, but can follow easy tasks or repairs. I sent my computer to HP for repair, (replacing the "audio in" 1/8 input plug on the b

  • Wake up on sms and listen to extracts

    Hello It is possible to configure the z3 compact xperia, to wake up and preview a received sms? Thank you FP