TestStand directly accesses table generated in LabView? How to do?
Hi all!
I am a new hand to TestStand, so I have several problems.
I generated a digital picture in LabView and dynamically display in the chart. When I want to use TestStand to generate the report, can I go directly to the table? Otherwise, how? My ultimate goal is to display the chart as a chart in the report.
Thanks a lot for your help.
You have several options here. Pass the transom to TestStand and save it as an additional result. Or you can just put a picture of the LabVIEW Control in the report.
Option 1: https://decibel.ni.com/content/docs/DOC-38945
If you use Option 1 it is important to understand this: http://digital.ni.com/public.nsf/allkb/7AE2EB304D4F9D4F86256B8100795B83
Option 2: http://www.ni.com/example/30736/en/
It also depends on what version of TestStand you use as well as the type of report you want to generate.
Tags: NI Software
Similar Questions
-
How can I view an excel file generated by labview?
Hello
I'm looking for an example view (open) a .xls file generated by labview after simulation but without using the generation of reports in the Toolbox.
someone knows how can I do?
Any suggestions?
Thank you
LONGAR
PS: I use labview 8.6
There is an example called 'Write Table to Excel.vi' which shows how to use ActiveX control in Excel. Simply use the example Finder and search key Word Excel.
-
Hello!
Sir, I have a few questions about generating word reports using (C language in labwindows) please.
1. How can I add a border to a page in word?
2. How do I add border lines and grid to a table generated in Word report (not "cvi control table"inserted from gui, I wonder about the table generated in Word report)?
3. How can I fill a table cell of report word with the data type other than 'character '.
And sir a question on the use of the timer in labwindows cvi please.
Sir, I'm trying to set a time minimum interval timer to 1millisecond (0.001 s), that I have set, timer cares about the interval set by me he only meets the minimum default time interval which is, I think as 10milliseconds (I'm using windows xp service Pack 3 version 2002).
Concerning
Imran
Pakistan
Have you read this statement ? It explains how to set the registry value:
If the REG_SZ useDefaultTimer does not already exist, you must create it under HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\CVI Run-Time Engine\cvirte. "" This can be done navigate to the appropriate folder, and then click Edit "New" string value. Then, click on means the name of the new value created, select Rename, and then specify useDefaultTimer as the name. Finally, double click on the name and specify the value True or False.
-
I get the above answer everytime I turn on the computer. (This is with AutoCorrect blocks checked). If I leave blocks unchecked, it follows a procedure 3 pass without rebooting and does not produce a result.
* original title - to try to start the procedure of checking disk I get the answer, "cannot open volume for direct access. How can I fix? I ran the GET Microsoft virus check tnd an own result.*
The application-specific permission settings do not authorization for the application server COM with the CLSID{DCBCA92E-7DBE-4EDA-8B7B-3AAEA4DD412B}the user NT AUTHORITY\SYSTEM SID (S-1-5-18). This security permission can be modified using the Component Services administrative tool.In the opposite case
http://blog.ray1.NET/2008/01/WinXP-SP3-DCOM-system-error-dcbca92e.html
http://TechNet.Microsoft.com/en-us/network/bb545879
http://www.blackviper.com/wiki/Network_Access_Protection_Agent
-
Hi all
We use JDeveloper Studio Edition Version 12.1.3.0.0 and deployed on GlassFish Server Open Source Edition 3.1.2.2 (build 5) and connect to the SQLServer database.
How to get the selected line in a programmatic (using a SortableModel custom not a display object) ADF table (generated from a bean)?
We are trying to get the selected row in a bean of a programmatic ADF table to retrieve data based on the selected line.
Any idea?
Well, you can use selectionListener to set the selected line to a variable of bean (but this bean must be in extended view or some superiors)
Something like this: http://www.awasthiashish.com/2015/07/get-selected-row-singlemultiple-from.html
Dario
-
How to import the access table to XE
Hi all
I'm a newbie in the XE. I kinda dababase in access. I would like to import this table to XE. There are about 200-300 rows and 7 columns, it is possible to import this table? If Yes, how can I do this? more I'll add a few columns durong or after importation.
Thank you and best regards,
Rustam
Published by: user10897725 on March 9, 2010 13:51Hello. I'm still a beginner and still regularly to seek help from the experts.
But I do not have an alternative to the import and export Access tables with Oracle 10 G Ex.
PS - I am running Windows XP.It is set up as an ODBC source Oracle.
The notice must be in 2 parts.
REM - start the Oracle database
1 - set up the ODBC connection.
2 export Access table in Oracle and import an Oracle table in Access.
1 - setting up the ODBC:
Open:
Control Panel
Administration tools
Data sources (ODBC)You will see then 7 tabs.
I used the first "User DSN" tabIn this tab, click 'Add '.
In the drop-down list, select "Oracle XE', which is at the bottom of the list. Click on "Finish".
You will then go into the Configuration of the ODBC Oracle driver.
You will be asked for a "Data Source name".
Type in what whether, for example G ex as long as you don't forget what you call the 'Data Source'.
The name of G EX later appears when you start using the ODBC connection.Description is optional.
The TNS service name is a drop-down list. Select XE
User ID. Enter the user name of the Oracle user to establish the connection.
Don't forget that the user must have been granted connect and privileges of the resource.Next step is to "test connection".
You should get a box that says "successful" etc...
There are other tabs and drop down menus at the bottom of Oracle configuration. Pilot, but leave these as default and can be changed at a later date.
You should see your newly created ODBC 'G EX' connection on the user DSN tab.
Close the Admin Tools screen and Control Panel.
2. move the table Access.
You can use ODBC to Access tables to export in Oracle and Oracle Import tables in Access.
The two will be in Access by using the tables import/link or export.
Imports and exports follow the same path.
For example. Export Access table to Oracle.
In Access go to the display of tables and right-click on the table that you want to export.
Select export and enregistrer save as Type, select ODBC databases in the drop-down list. (bottom)
Click Ok.
You will then get a screen "Select data Source".
Choose the tab 'Data Source Machine', and you should see your named data source. (EX G)
Select it and click OK.
The service name must say XE
Enter the Oracle user name and the password of the user with connect and resources.
It should then be exported.
Reverse the import process.Tips for Access tables.
Oracle likes the names of tables and fields in capital letters. He doesn't like spaces in domain names.
You may need to export the tables to one another access empty db to rename the table and or fields before exporting to Oracle.I hope this helps...
-
How can I add a Microsoft Access Table for Dreamweaver CS6?
Hello world
I am trying to add my Access Table already created in Dreamweaver CS6. When I try the file > Input > tabular data, it does not work. It must be in the format Microsoft Access SQL. The version of Microsoft Access that I use is 2013. Computer Windows 10.
Thanks in advance for your help.
YourAccessFile.accdb">Click here to download an Access file
Nancy O.
-
Table 7.1 LabVIEW and LabVIEW 12
Hi all
I don't know why this is happening. I have a program here where I have controls for the enumerator who has 0,1,2 and which leads to a Boolean condition (0 - F, F, 1-F, T, T-2, T that appears in table 3. However, table 3 is the inverse of what we indicate at the outset.
The program has 3 main buttons: NEXT, FINISH, and STOP.
The program does not stop until you press STOP.
Whenever you press the OTHER, going to all the controls of the enumerator value in the table and it keeps adding until I click on FINISH. The number of times is THEN pressed into guarded is saved
The FINSIH leads to two operations:
(1) there is a loop FOR who runs the number of times you press the OTHER.
(2) inside of the loop, it modifies each row of the table of 48 items in a 2D of 4 X 12 table, where the position of the element is reversed. The original numbering of the table from left to right, where each item is sequenctially added with rest more element of port 0 as the 0th value of table and continues. , but in the table shown in the annex, it passes to the numbering from right to left with the right most element affecting the element 0 1 Port.
(3) it is powered by an array of Boolean leading to an array of Boolean T/F.
Later I want to feed this T / F my acquisition of data values.
Here, I'm a bit confused because this program works perfectly well inLabVIEW 12 but it does not iterate table properly in LabVIEW 7.1. In LabVIEW 12, I am able to get results than expected and there is a perfect match between 'annexed table' and the 'array3. However, in LabVIEW 7.1, there is a mismatch between the "annexed table" and "table 3". From what I can see, the 3 table 7.1 uses data n of the previous run for iteration 0 array. And then uses the data for iteration in table 1, 0E current tracks. and then for iteration in table 2, it uses 1 data of the current tracks... and so it goes up to n - 1, then it stops.
Please suggest what would be the best way to solve this problem, and I do not see that in LabVIEW 12.
Thank you
G
As has been said, your program fits with the race conditions and general misconceptions about data flow programming.
You are all far too complicated! I can assure you that this could be done properly with less than 10% of your current code. For example, your rings 48 photo could be placed in a container of cluster instead of a decoration. Now, all you need is a single terminal followed 'cluster to table' instead of this gigantic Spider Web of the code in the event "next". Why is "number of orange occurrences? This must be an integer. Why don't you use one of value instead of directly wiring? Why the number of iterations depends on [i] from the outside while loop? No it has no logical sense. You have access to the main draw of the regisiter to SHIFT, so do not even an indicator is hidden. Why involve the front panel for stuff that only the code must? Waste duplicate code all this blue in the event 'Finish' could grouped in a single small loop.
See how far you get. The final code should probably fit on half of a postcard once you do this. You don't need the properties of value!
Once you reduce the code to 10%, you can make a 10 x more complicated program with less effort than what you have here!
-
error when pass array 1 d by data in table pointer via Labview-built c++ dll
I'm trying to generate a Labview VI to a DLL and let it be invoked by vc ++, by which a 1 d array is passed. However, I can't generate the DLL when you use the data pointer to the table, which gives the error like below:
[ERROR]
Code :-2147221480
Strengthening of the DLL.
Error when compiling the DLL as a function name or a parameter is illegal. Check function and parameter names are legal C identifiers and are not inconsistent with the LabVIEW headers.
Additional information: 9 project link errors
Type Library generate error. MIDL.exe failed during the compilation of the odl file used to create the type library.
Note: The error indicates that the odl file has unknown types. This error is possible when
works with non-standard types is exported using the method qualifier exporting files in
release the configuration that have not been recompiled during the build process.The Prototype of VI define is as below
But, if I use the pointer to manage through the table, the generation is successful, error-free. I write something to call the DLL built labview, which basically reads 1000 double the data of an instrument.
#include "TestDQMaxDLL.h" #include
using namespace std; int main(int argc, char** argv) { cout << "Start testing DQMax DLL" << endl; int leng{ 1000 }; DoubleArray rawDPData = AllocateDoubleArray(leng); test_dqmax_dll(&rawDPData); cout << "Successfully invoked the DLL!" << endl; cout << "DoubleArray.len: " << (*rawDPData)->dimSize << endl; for (int i = 0; i < leng; i++) { cout << (*(rawDPData + i))->elt[0] << "\t"; if (0 == i % 10) cout << endl; } system("pause"); DeAllocateDoubleArray(&rawDPData); } But the printed results are not correct.
My questions are:
1. why cannot generate DLLS with the data of table pointer. In this case, the argument of the function is as simple as a double array.
2. for table handle pointer, when the resutls are incorrect and how to get the good ones.
Any comments would be appreciated.
BTW: I use Labview 2012 with Visual c ++ 2013 on Windows7 64 bit.
I never needed to pass a table of LabVIEW handle external code. Search this forum for posts of RolfK, it is most likely to have posted such an example. I recommend that you keep things simple and remodelling your table a table 1 d 2D before moving on to external code and manage as a 1 d table (it's just a little extra math).
Sorry I don't have a solution on why you can't build with a 1 d as a pointer of table table. If you post your project I'm happy to try to build (I'm on LabVIEW 2012, however), but as you said, it will rely on another machine, it seems more likely to be a problem with something on the specific computer where there is a problem.
-
Directly access an IP of D-Link camera
Is it possible to directly access an IP camera. Don't know there is a block that can enter user and password but I don't know what it is. Can someone explain how I can directly access an IP camera in addition to the block is called.
Thank you
Andrew
Hi André,.
I guess you are trying to access the camera by MAX or LabVIEW. This would require the use of our driver NOR-IMAQdx. Unfortunately, our IP IMAQdx camera support is limited to the cameras manufactured by Basler and axis. Please take a look at the following link for more precision.
http://digital.NI.com/public.nsf/allkb/4331B4AA3AE95233862574C200539A2F?OpenDocument
So, I do not think that you will be able to access your D-Link IP camera via our software. I apologize for all that mind which can cause.
Best regards
-
Direct access to the form fields in the process?
HI -.
I am building an Apex application that has a section of form, I need to generate manually - I need a lot of Javascript custom treatment within this block of fields (generating an arbitrary number of fields based on other user input, update totals the user to change values, etc.). I have no problem to build that portion of the application.
However, I am now not sure how to access the fields I create in a post submit processes (so I can process/save the data entered). Y at - it has a syntax that I use in the process through a list/collection of all submitted fields, or (b) directly access the value of the field named "xyz"?
Thank youIf you mean spit your own tags to entry with htp.p, you can do that in the APEX. You must use the APEX_ITEM package. When you submit the form, you will get an error because the procedure of wwv_flow.accept is not the settings that correspond to the fields in your form.
Tyler Muth
http://tylermuth.WordPress.com
[Oracle security application: development of secure database and Middleware environments | http://sn.im/aos.book] -
TestStand can't find subVIs with Labview RTE
I read the user manual on how config map if I want to call a VI with RTE labivew, but I'm still, puzzle on TestSatnd can not find the subVIs.
Here's what I have:
1. a development PC teststand with the right version of Labview RTE installed.
2 another PC installed labview development system
3. I created a VI in labview, PC using features of Report Builder. Of course, she calls a few vi.lib of labview subVIs.
4 then I copy this VI to Teststand PC and try to load the sequence VI, he transforms a cannot find the subVIs.
I wonder if Labview RTE includes all vi.lib, instr.lib. What should I do if I want to call this VI without installing the development system in the machine of teststand?
-
someone was able to access my laptop remotely today, how would I know if they let any virus or spyware on it. I have norton 360 virus protection that has not detected any viruses. IM worried about using my computer to stuff order online where they can steal my credit card details / number while im using it
Hello
How do you know that someone will access your computer from outside? Allow access and do you
you know who it was?Here is some information that should help you:
Was it a SCAM phone call that initiated the connection distance:
Avoid scams to phone for tech support
http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspxIts a total scam. Uninstall their software and then perform a system restore before you install.
Change all your sensitive passwords at all sites - e-mail, Bank, credit cards and others. (Do not
on the computer compromise and it would be better to do it on the phone or in person.)You can even restore your system to factory fresh to make sure their software violates not
your security. (Ways to re - install Windows Clean - removing everything on the backup drive so all the data
before hand.)It is also possible that they consulted Bank, passwords and information of credit card on your computer. If
in order to check for malicious software as shown below. Change your passwords. Contact the Bank and credit
phone card companies. Do the same for any investment or other sensitive professionals or personal
accounts that may have been violated.====================================================================
====================================================================In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
Watch groups. Arm yourself with knowledge.No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
computer. So that's the fraud or scams to get your money or worse to steal your identity.Do not fall for the fake phone Tech Support
http://blogs.msdn.com/b/securitytipstalk/archive/2010/03/09/Don-t-fall-for-phony-phone-tech-support.aspxAvoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
phone calls to help you fix your computer
http://www.Microsoft.com/protect/fraud/phishing/msName.aspxScams and hoaxes
http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3Microsoft Support Center consumer
https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1Microsoft technical support
http://support.Microsoft.com/contactus/?ws=support#TAB0Microsoft - contact technical support
http://Windows.Microsoft.com/en-us/Windows/help/contact-support===========================================================
===========================================================Follow these steps carefully:
If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeSuperAntiSpyware Portable Scanner - free
http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGERun the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htmMicrosoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx----------------------------------
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
After the removal of malicious programs:
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
======================================
If necessary AFTER THAT you are sure that the machine is clean of any malware.
How to do a repair of trouble Windows 7 installation (it's for Windows 7 and there are similar procedures
for Vista if necessary.)
http://www.SevenForums.com/tutorials/3413-repair-install.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Original title: Direct access component problem - must close. incompatible tfswct.exe
I uninstalled Shield Deluxe, restarted, then tried to start installing Webroot SecureAnywhere Essentials from the installation CD.
I did not demand the product key so no Webroot software is installed.
How to solve the problem of tfswctl.exe?
Hi DW_758,
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Follow the steps in the article.
Problems installing and uninstalling programs on Windows computers
http://support.Microsoft.com/kb/2438651
Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start and then click Run.
(b) type msconfig and click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 3: Install the applications as an administrator.
HOW TO: Use the RUN AS command to start a program as an administrator in Windows XP
-
Cannot open volume for direct access?
OK so I have windows vista 32-bit home... and I installed this program from avg that solves all the problems on the computer... Well now when I boot, I get a cannot open volume for direct access... and I loaded my computer finally and its telling me everything is corrupted?
Hello
I'm sorry but most of the posters, which I am part, who come here do not believe in using Tuneup Utilities, registry cleaners, etc. to improve performance or solve problems.
They are completely unnecessary.
Do a Safe Mode system restore to before the problem started.
http://bertk.MVPs.org/html/restoresysv.html
How to access Safe Mode
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Or, if you don't have one, borrow a DVD of Microsoft Vista, not a recovery disk and you could do a upgrade in repair facility.
"How to perform a repair for Vista Installation"
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And I have contacted AVG or their Forums as you say it was their program that caused the problems.
http://free.Avg.com/us-en/support
See you soon.
Maybe you are looking for
-
How to get or make a triangular LED with LV8.6?
Hello LV8.6 have rectangular or round Boolean indicator "LED". How can I do a triangular? (More generally: How can I make a special order or a display that are not only the modification of existing?) Tanks of the reunion island
-
Vista OEM of Emachines detail record
My client purchased Vista OEM of Emachines. It seems to be a retail version as I'm prompted to save the operating system. Originally, the OS is XP Home, but the computer is out at the time that Vista appeared on the scene. Microsoft and Emachine indi
-
BlackBerry Z10 problems with the battery while using the LTE
Given that I am connected to LTE (4 G) battery is not longer than 8 hours. Is this normal?
-
I have already created an image, I'm about to order a banner online. they have it on hold until I answer them because they say it will be blurred because the resolution is too low. any help would be greatly appreciated. I don't know anything about.
-
need to download the driver for my printer
I have windows 8 on my new computer and I have a lexmark 5470 printer how to download the driver for this printer