TestStand display bug

Hi all

I created a few types of custom step Teststand this control NI Switch, scope and other cards that perform tests as part of a sequence of automated test. The problem I have is that sometimes when hurtling through a set of steps in a sequence, the teststand immediate window, post "success" or "Failed" result of status before the execution actually got to this point in the sequence.

Everything although the problem can be lived with, doesn't look good for the customer!

An ideas

Price of Derren

Software engineer

AmFax

Hello...

Finally stumbled on the reason for the strange result before executing

This point.

The reason for the strange going-ons is custom-stage types when created and updated the, over

upward with "Failed" string entry in the 'Step.Result.Status', so that every time the stage wont afin que chaque fois la coutume etape type type has

placed in a sequence, it already seems to have a result in it and Teststand decides then to

display the result for this same step if it n, t actually arrived!

So clear the string "Step.Result.Status", and everything is as happy as a pig in you know what!

Price of Derren

(Now if everything goes well with a more happy customer)

Tags: NI Software

Similar Questions

  • widgets - Panel - accordion display Bug

    I add a widgets Panel accordion & when I click on the accordion in preview the page footer go to the display Bug

    you can see in http://formula.BusinessCatalyst.com/

    (the green buttons on the right)

    Hello

    Please uncheck the "Sticky footer" option, and then test.

    Kind regards

    Aish

  • The El Capitan Mail smart folders display bug?

    I upgraded from 10.10.5 to 10.11.6.

    Mail.app is having display problems in smart folders.

    When I click on a smart folder, it lists the previews/messages like this:

    As you can see, the content of the Panel overview/list more jammed to the left.

    The only way I found to restore it how it should be, is to adjust the width of this Board. As soon as I set (even by a just a pixel, so be it) messages are again occupy the entire width.

    But if I switch switch to another folder, and then return to a smart folder I "fixed", it will again appear incorrectly. If the "fix" lasts as long as I still watch one of this file.

    I restarted the post, and it has no effect.

    Is this a known bug?

    Is there a suggested way to try to resolve this? Basically, he made unusual Mail to me (or, at least, considerably annoying to use).

    If it's just the smart dance which gives bad try this.

    Exit the Mail.

    In the Finder, select go, then go to the folder and paste the path below into the box and click Go:

    ~/Library/Mail/v3/MailData/SmartMailboxesLocalProperties.plist

    In the window that opens, select the file SmartMailboxesLocalProperties.plist and move it to the trash, but do not delete it. Start Mail and see if it works now.

    In case of problem, you can always leave Mail, open the Recycle Bin, right-click on the file and choose put back to restore and replace the new file created.

    If the above does not work, try this:

    Exit the Mail.

    In the Finder, select go, then navigate to the folder. Copy and paste the path below and click GO:

    ~/Library/containers/com. Apple.mail

    Move the entire folder com.apple.mail to the Recycle Bin, open Mail and test. If all goes well, you can empty the trash. You may need to re create your user settings.

  • MacBook Pro retina display bug?

    I don't know how to submit a bug report, so I post the problem here. Can't move the mouse outside the window of computer virtual and the movement of the mouse is extremely slow and erratic when you enable the full resolution for the retina display and set the size of text and other items to 200% in the control panel to Windows 7. Everything works as it should with 150% but as soon as you change to 200% (which is a must work on a MacBook Pro with the retina display) the problem starts immediately. I have a MacBook Pro with the retina with Mac OS X 10.8.1 and Fusion 5.0.1 and Windows 7 with SP1. Everyone has noticed this annoying problem?

    Turn off the power of the shadow of cursor. On 192DPI, shadow strength slider the slider made software, that really seems to shake the ease curve smile fusion.

    For some cursors generally less crappy, please take a look at:

    http://kaizoworld.deviantart.com/art/Windows-7-high-DPI-324612252

  • display bug display interface

    Hello

    text this thread to report a problem I've encountered with indesign that can maybe help some of you.

    I called adobe service technique pour end of to come. I did not solve the problem, but I found an acceptable interim solution pending an update assent that would correct this bug.

    explanation bug of the:

    I ended up concluding that the bug occurs between index of indesign and options of windows displays.

    So in indesign, the main tool bar tools was not always well clickable only accessible by the shortcuts keyboard. Of pallets options are impossible to activate...

    for example:

    • tool selection (arrow), can't activate it by clicking with the left button of the mouse hotel, but it works with the shortcuts well-tempered clavier (v). This is not the only affected tool.
    • Impossible to activate the options of pallets (by impossible example of Center display the text with the corresponding button in the paragraph, cannot be selected - palette / was - lock unlock a layer in the palette layer)...

    and so on.

    So I called Adobe support who, after some tests by telephone, sent me a letter inviting me to follow the instructions given on a page not here is the address:

    http://helpx.Adobe.com/FR/x-productkb/global/troubleshoot-unexpected-behavior-user-account - 2.html

    I have therefore followed scrupulously would address each of the operations but nothing has solved the problem apart from the last point

    7. use a new account.

    actually indesign it's handed to function normally.

    Once back on my user account, it didn't work again.

    I had a little idea however, the parameters display on the new user account are different, I wondered if it would not come.

    So I in my traditional modifier user account preferences display with right click on the desktop-> preferences, clicking display bathroom opens a page entitled facilitate the Conference onscreen...

    I had to place selected the option "large - 150%" which seems to be the element in question causing the bug in indesign. Once back to the option 'medium - 125% ' or 'small - 100% ' and after having restarted the session to activate the new display settings, o miracle, indesign resumes its normal behavior, everything seems to work properly.

    I therefore reminded the adobe service technique Pour signaler the solution that seems to solve the problem at home and who was not given in the page that was told to consult.

    This problem will be seems you he submitted to the developer and can be corrected in a future update.

    Pour info my config:

    PC Windows 7 Ultimate

    CPU AMD phenom II X 6 1090 - t - 12 GB of DDR3 Ram

    Display:

    NVIDIA gforce 9800 gtx +.

    Here I hope that this post will come to your aid if encounter you the same type of problem.

    And if there is a soul to make and the English translation, if not I'll try to make it a little later with my somewhat broken English.

    You can find more information about this to panels and tools InDesign respond not to the clicks of the mouse (Windows 7/Vista)

  • Flash plugin display bug

    Hi all!

    I really hope you can help me! I did a site in Flash 8 Professional that has a main index.fla that loads different SWFs into a square, according to a menu on the left.

    Nothing special, except for the fact that almost every time the sections of swf are loaded, the flash plugin displays half of still less the content that should appear. To see the contents of a section, click the button in the section several times and finally everything is displayed.

    This does not happen on the local computer, but it also happens in IE and Firefox on my computer and much else as well the computers of people who have accessed the site.

    For those who want to have a look at the site, the address is
    happilyeverafterdr.com bug


    Thanks in anticipation,
    Ciprian

    Hello!
    Sorry for the late reply, seems real life made me...

    It was indeed poor design... my charger was testing _root.getbytestotal against _root.getbytesloaded to see if it's done
    but of course who does not work in a file external loaded swf.

    Also, you're right with the code in the files! I had to change it in each file, so I guess I won't remember to do as
    you said the next time.

    Thank you very much

  • Display bug with Tuner TV Toshiba, MCE and WinDVD Creator 2 for Toshiba

    Hello, I discovered a bug that has been troubling for a long time.
    When I watch TV in MCE, the image is a little tense and off-center to the right, which means that I do not see the right side of the screen.

    When I reinstall the TV Tuner driver, version 1.2.0.6, it corrects the problem, and the image is full screen and perfectly centered in Media Center.

    So I spent some time trying to find what was causing the centered and stretched image bug and it seems that it is created by 'WinDVD Creator 2 for Toshiba' which has been packaged with my Qosmio.

    I tracked the problem to be a parameter in the registry to the following key:
    HKEY_LOCAL_MACHINE es\ttv200x\Parameters
    The "VideoRes", which is set to '0' by the TV tuner driver, is set to '4' after WinDVD Creator 2 for Toshiba is used and from that moment, the bug is visible in MCE.

    I've found a workaround with the parameter 'VideoRes' return '0' and restart the computer, then the screen is OK once again in MCE.

    If for some reason, WinDVD Creator 2 makes this change automatically in the registry of TV tuner setting.

    Can Toshiba releasing a patch for WinDVD Creator 2 fix the problem?

    I think it's affecting all the owners of Qosmio with TV tuner.

    Thank you for your support.

    Alcahest

    Hello

    WinDVD Creator 2 is designed by Intervideo, not Toshiba.
    But like you said that the new version of driver has solved this problem.
    Nevertheless thanks for your posting. It s very useful.

    Good bye

  • Weird time display bug

    I'm sorry if this has already been reported. I don't know if it's a Droid Maxx or a problem of Android, but if you go into the settings of-> apps, slide to the 'running' tab and look at the time that one of the applications were broadcast, it seems to be a display error. You see things like "B1:09:11", or "; 1:15:52 ', 'A3:40:59', etc.


  • Exhibiting in context sensitive help display bug

    Hello

    I found a bug, but just didn't know where to report so I'm posting it here. (What is the suitable channel for bug reports)?

    When I wriggle-over "before software final Position" on the property of an axis node SoftMotion, context-sensitive help contain this line:

    Valid values are between 0 and 253. The default value is 230.

    I was puzzled, because I use (successfully) values well beyond this range. In any case, I detailed assistance from opening and saw:

    Valid values are between 0 and 253. The default value is 230.

    It's a very big difference! Is it simply a typo, or a result of formatting stripped using the context?

    Hi JKSH,

    I presented the CAR #390204 to our R & D group for the survey.

    In addition, here a link to a page describing the process of bug reports.

  • Permissions insufficient to display Bug

    I ran into a problem for the first time, I've not met before. Since the notes version of Jabber, I tried to access a warnings (CSCuv50354), and returned the bug toolkit: "insufficient permissions to view Bug". I am connected and I never had a problem to access the details of the bug before. Someone saw something similar, or knows how to solve this problem? Thanks, Sandor

    Hello

    You can't solve it see much time before on live just missing bugs, it basically means bug is still being developed by the team OF there is no solution yet and it is not made public, so only personal internal Cisco can consult them. You can lift with TAC and he can go TO to see if there is anything they can release you, sometimes, you get lucky sometimes that you will be turned down depending on the bug itself

  • 6.2 display bug?

    I found some problem with sight as well as areas of approval one way. It seems there was no problem when I added the domain (client1.lab) to exclude the domain. But no error when I take off the field list exclusion.

    My setup is two areas; HQ.lab and client1.lab;

    One-way trust

    HQ.lab-> client1.lab

    (leaving)->-(incoming)

    View connection is a member of HQ.lab.

    CLIENT1-VM-01 is a member of client1.lab.

    Here is the error log when I entered "vdmadmin-N areas-exclude - domain add CLIENT1" to hide the domain on the list of areas in Customer View; If the user must enter UPN.

    2015 09-19 T 02: 31:22.841 - 05:00 INFO (09 A 0-08 A 0) < ajp-nio-8009-exec-1 > [UserContext] (SESSION: 95eb_ * _0b70 [email protected]) UPN Login: user whose [email protected] UPN is the user CLIENT1\user1

    2015 09-19 T 02: 31:22.879 - 05:00 INFO (09 A 0-08 A 0) < ajp-nio-8009-exec-1 > [AuthorizationFilter] (SESSION: 95eb_ * _0b70) CLIENT1\user1 user has successfully authenticated to VDM

    2015 09-19 T 02: 31:22.880 - 05:00 INFO (09 A 0-08 A 0) < ajp-nio-8009-exec-1 > [PAEContext] (SESSION: 95eb_ * _0b70) Client supports idle session management. Timeout for the user value: never. Desktop SSO: enabled. SSO application: enabled.

    2015 09-19 T 02: 31:22.885 - 05:00 INFO (09 A 0-08 A 0) < ajp-nio-8009-exec-1 > [Audit] (SESSION: 95eb_ * _0b70) BROKER_LOGON: USER: CLIENT1\user1; USERSID:S-1-5-21-1754858777-1199020022-3019864467-1106; USERDN:CN=S-1-5-21-1754858777-1199020022-3019864467-1106,CN=ForeignSecurityPrincipals,DC=VDI,DC=VMware,DC=int;

    2015 09-19 T 02: 31:23.207 - 05:00 INFO (02c 0 - 0a 80) < Thread-33 > [g] (Request2) user1 user connected to the Secure Gateway - session ID server: 04A6_ * _00B4

    2015 09-19 T 02: 31:24.619 - 05:00 ERROR (0 B 80-1640) < MessageFrameWorkDispatch > [ws_winauth] cannot bind to LDAP://client1.lab (the user name or password is incorrect). {SESSION: 95eb_ * _0b70}

    2015 09-19 T 02: 31:24.619 - 05:00 ERROR (0 B 80-1640) < MessageFrameWorkDispatch > [ws_winauth] could not connect to SID=S-1-5-21-1754858777-1199020022-3019864467-1106, field name = client1.lab {SESSION: 95eb_ * _0b70}

    2015 09-19 T 02: 31:24.624 - 05:00 ERROR (09 A 0-1004) < ajp-nio-8009-exec-6 > [PAEContext] (SESSION: 95eb_ * _0b70) could not determine whether the user account (User1) is valid for the connection of the AD, assuming that disabled.

    In addition, the user (user1) will see an error after selecting the pool (pool-c1). "Your user account is disabled. I checked the account and it is always enabled.

    When I entered "vdmadmin-N areas-exclude - CLIENT1-delete area" in order to expose the field to the field list in the view client. The user can enter either UPN or enter the user name and select the field.

    It works perfectly. No errors appear in the newspaper.

    Weird thing. I tried already bind LDAP with UPN and without. It works very well. No idea why it doesn't have a LDAP bind when the domain is to be excluded? And it works very well even if the domain is not to be excluded.

    Is - this bug?

    Hello

    Thanks for reporting this.

    View has an additional security check to determine if an AD user account is disabled. This check is always performed at the opening of the session, but it is also possibly run (enabled by default) for each sales order. The by checking the order is what is missing in your case and generating errors in the log.

    The command controls are ignored when view detects that the user's domain has a relationship of limited confidence or go with domain name of the server to connect. This, because the view will be not able to bind on the one-way trusted domain. The field has been excluded in your case, so the view cannot determine the user's domain has a one-way trust relationship. This translates the audit being attempted and the failure to bind. The fail action plan linking the only safe is to deny access, where the error that you are experiencing.

    I raise problem report to manage this better long-term scenario.

    Thank you

    Griff

  • Help - Flash 8 display bug w / transparency and Drawing API

    Hello

    I was wondering if anyone has a work around for this bug?

    When I use the drawing API to create a full circle in a new MovieClip (with the drawCircle function defined in the docs), and then set the new video at 50% alpha, half of the race is set to 100% alpha. It is easy to reproduce, simply paste the following text in a new flash document and you'll see what I mean:

    createEmptyMovieClip ("a", 10);
    This.a._x = 50;
    This.a._y = 50;
    This.a._visible = true;
    This.a._alpha = 50;
    this.a.lineStyle (10, 0xFF0000, 100);
    this.a.beginFill (0 x 888888, 100);
    drawCircle (a, 50, 50, 50);
    this.a.endFill ();

    function drawCircle(mc:MovieClip,_x:Number,_y:Number,_r:Number):Void
    {
    Taken directly from the Flash documentation
    mc.moveTo (x + r, y);
    mc.curveTo (r + x, Math.tan (Math.PI/8) * r + y, Math.sin (Math.PI/4) * r + x)
    Math.Sin(Math.pi/4)*r+y);
    mc.curveTo (Math.tan (Math.PI/8) * r + x r + y, x, r + y);
    mc.curveTo (-Math.tan (Math.PI/8) * r, r + x, y-Math.sin (Math.PI/4) * r + x)
    Math.Sin(Math.pi/4)*r+y);
    mc.curveTo (r + x, Math.tan (Math.PI/8) * r + y, r - + x, y);
    mc.curveTo (- r + x, - Math.tan (Math.PI/8) * r + y,-Math.sin (Math.PI/4) * r + x)
    -Math.sin(Math.PI/4)*r+y);
    mc.curveTo (-Math.tan (Math.PI/8) * r + x, - r + y, x, - r + y);
    mc.curveTo (Math.tan (Math.PI/8) * r, - r, + x, y, Math.sin (Math.PI/4) * r + x)
    -Math.sin(Math.PI/4)*r+y);
    mc.curveTo (r + x,-Math.tan (Math.PI/8) * r + y, r + x, y);
    }

    You can see that it looks like there are two lines instead of one. This is a very serious bug in my chart and I don't know how to get around it! Does anyone have advice?

    I use Flash 8.

    Thank you very much
    Michael

    1/2 stroke is overlaid with the filling. to remedy this, create your race 'outside' of the filling. That is to say, draw the line with the same Center, but with a RADIUS has increased to 1/2 the width of the outline.

  • Display bug?

    Someone had problems with the flex builder coding window (display, no cursor) focus moving to the front of the line that the cursor is currently in? It's kind of a pain - happens when the line you type on to moves out of sight on the right side, and it becomes impossible to see where you type without dragging the scroll bar on in this direction. This happens to me every time I have stop to type in a section beyond the right edge of the window.

    All I have this problem, or is it a kind of preference setting which can be turned off?

    ekokurtz wrote:
    > Has anyone at - he had problems with the flex builder (display, no cursor) accent
    > coding window moving toward the front of the line that the cursor is currently in?
    > It's kind of a pain - occurs when you tap the line of moves out of sight
    > on the right side, and it becomes impossible to see where you type
    > without dragging the scroll bar on in this direction. What happens to me
    > whenever I have stop to type in a section beyond the right edge of the window.
    >
    > All I have this problem, or is it a sort of preference that
    > can be disabled?

    Looks like we have fixed this after beta 3 - I can't reproduce in our
    current build.

    --
    NJ
    Flex Builder team

  • Disperse the display bug?

    Let's say it's my data:

    (X, Y)
    -------
    (4, 85)
    (4, 106)
    (6: 39)
    (7: 58)

    Only 3 of the 4 points are plotted - whenever there are several points that have the same x axis value (in this case, x = 4 a 2 y values), only one of the points is drawn. Here is the code:

    < cfchart >
    < cfchartseries query = "qryMyData" type = "scatter" PostesColonne = "MyXdata" valuecolumn = "MyYdata" > < / cfchartseries >
    < / cfchart >

    This seems to be a bug. Anyone know of a workaround? Thank you.

    Pete

    I submitted the question of products 64506 for this problem. It is likely to be looked at until the next version of CF.

    Ted Zimmerman

  • How to fix a Firefox menu display bug?

    By clicking on one of the dropdown menus at the top, for example. folder, tools, help, show the whole Firefox window I have open instead of the usual options such as the "Firefox Help" etc. Of course, it is very small because it reduces the entire window in this area until I move the mouse around, then I can see all the Firefox options.

    Tried to uninstall and install older versions (22 and 23), reset Firefox, seems to have occurred after you install an add-in.

    Try disabling hardware acceleration in Firefox.

Maybe you are looking for