TestStand open problem

Similar Questions

• PDF attached used open - problem just started

  This week, a PDF file attached to an e-mail gives error message "error downloading, the download could not be saved, because an unknown error occurred - try again. On the download window, the message is "failed, resource mailbox. Yet, I can save the file to the desktop and open it.

  This problem just started happening.

  Help would be appreciated... Thank you in advace

  Perry B

  Problem solved, kind of...

  I went and changed the options of attachments to use my own Adobe Reader instead of the (in Thunderbird) option. Now by clicking on the attachment in Thunderbird works fine. There must be something wrong with the drive of Thunderbird.

• Safari - open problem www

  I cannt open web www.cetin.cz in Safari - version 9.0.3 (11601.4.4). If I try Opera, everything is OK.

  The site loads on the Mac without problem after hitting the Cancel button when the dialog box drops down.

  

  If Safari does not load a page or a page Web elements are missing

  https://support.Apple.com/en-us/HT204098

  If Safari is slow, unresponsive, which closes unexpectedly, or has other issues

  https://support.Apple.com/en-us/HT203353

• 60 d-opening problem when shooting video

  I have a 60 d with 18-135 mm 3.5 lens. I set the camera to manual exposure. When I have the full lens large, the opening reads 3.5, then I tighter zoom, opening turns into 4, 4.5, etc.. Looks like there is something current automatic that I don't understand. If I'm on manual exposure, shouldn't ' the opening remains to 3.5 until I change it? Thanks a lot for all ideas.

  I wouldn't call it a problem... your lens has a variable maximum apertures according to the length of lens - f/3.5 at the end wide and f/5.6 at the tele end.  When you set the aperture f/3.5 value to the wider end, he was welcomed, but when you zoom in, 3.5 is no longer reached, the camera is simply smart enough to set available for you, max aperture even in manual mode.

• Internet speed when opening problem

  Hello

  A month ago I bought a new laptop HP PAVILION 15-P020ND.

  Everything worked well I got a fast internet connection after some time using it I closed it so happened in sleep mode.

  Later, when I opened it once again and I wanted to download, my internet connection was terrible and sometimes it stopped connecting. I did some research but could not find anything about it.

  So I decided to download the latest version of the driver for the Realtek RTL8723BE. I installed the driver and I got my internet speed full again. (found here http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=nl&lc=nl&dlc=nl&softwareitem=ob-132572-1...

  But evertime I close and goes into sleep mode the internet speed is terrible the next time I open it a connection slow link

  When I install the driver again he's going fast Fast Link Connection

  Hope someone can help me with this problem.

  I think I solved it. I downloaded the driver realtek on the lenovo site installed and reboot. I checked the speed of connection and it was a good connection then better before. I put in sleep mode a couple of times and he will wake up again and I've always had a perfect connection.

  So it's resolved.

• QFile open problem

  Hello guys,.

  My question is perhaps stupid and I don't know that I'm doing something wrong, but I can't do https://developer.blackberry.com/cascades/documentation/device_comm/networking/tutorial_http_comm.ht... sample works correctly.

  The problem is that

  mFile->open(QIODevice::ReadWrite))
  

  Returns the false value each time. I initialed mFile-variable the follwing way

  mFile = new QFile("models/model.xml");
  

  I mean I followed the instructions and made the same way... But it does not work.

  Please notify.

  Thank you!

  It won't work because I've already initialized mFile-variable in the file of all.

  So, I did the following:

  QString appFolder(QDir::currentPath());
  QString fileName = appFolder + "/app/native/assets/models/model.xml";
  mFile = new QFile(fileName);
  

  And now it works. Faced with another problem, but it is the subject of another topic.

• Photos of opening problem.

  Hello!

  I cannot open my pictures on my laptop! I use windows 8 on an HP laptop.
  When I opened the pictures in MY PC (contains about 900 pictures), it opens and the photos start to load. But half way through loading, the entire screen goes blank and then to the office.
  I don't have unfortunately saved photos.
  Help, please!
  Thank you! :)

  Hello

  I certainly understand the inconvenience caused to you.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Do you receive an error message? If Yes, what is the exact error message?

  2. You did it all changes (hardware / software) on the computer before this problem?

  3. What is the file format of the images? Y at - there no specific file format photos that you are not able to view in the system?

  4. What program you use to see all the photos? Is - this Windows live Photo gallery or a Photo app?

  5. The place where you saved the photos?

  6. You are able to find the pictures after getting the blank screen?

  I suggest you access photos using the Photo app Please, try the procedure described in the given Microsoft Help article and check if it helps.

  Photo using Windows app

  http://Windows.Microsoft.com/en-GB/Windows-8/photos-app-FAQ

  I hope this information is useful.

  Please provide us with the above information for further assistance, we will be happy to help you.

  Thank you.

• Photoshop does not - open "problem connecting to the server.

  I'm having a problem with Photoshop is not opening.  It opens, and load it, but then I get a pop up notifiaction saying:

  ' There was a problem on the server 'server name' connector

  The server may not exist or it is not available at this time.  Check the server name or IP address, check your network connection and try again.

  Server, as it is at work, because I have the opportunity to take my laptop to work.  I get error at home, when I'm no longer connected to the server, and on a totally different WiFi network (the server is through WiFi). I tried to restart and turn off WiFi all together, but I still get the error each time.  I don't want to uninstall and reinstall because I recently moved, and I don't know where my box is provided with the serial number.  I use Photoshop CS on Mac 10.7.5 5.5 (Macbook Pro).

  Any suggestions?  Thank you.

  Looks like you put a link/alias/shortcut in Photoshop file to a network server that is not currently online.

  Check all the stuff in your Photoshop file that you changed (plugins, presets, expansion boards, etc.).

• Unusual firefox not opening problem

  I clicked on something in facebook, I exit firefox, go make a cup of tea. Come back and click here to open firefox again, it seems that he wants to open but nothing, no message or window at all. It completely opens at all. I then proceed to perform a virus check, nothing. I can do a complete uninstall that went surprisingly well and hassle then a reinstall full. After reassembly, it says 0% extraction then the window closes and nothing new just. Ive tried a complete restore of the system for a few days before, but who did not as he said that nothing was there. Admitadly 18 year old a little techno-phobique im (gimme vinyl anyday!). But I really need mozzila because Internet explorer has none of the my bookmakers or tabs. Hellpppp!

  3 days ago

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; GTB0.0 .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

  Hello Hamish.

  I hope that this support article is what you need:

  https://support.Mozilla.com/en-us/KB/Firefox+will+not+start

• PS opening problem cs6

  When I click on PS to open it, a dialog box appears saying uninstall and reinstall the product. Can I uninstall and reinstall without the original disc?

  Yes, you can download the installation files.

• Adobe first pro opening problems

  I want to install Adobe premiere pro and when I did, it takes a lot, but well... then all the world has a button that says open but I Don t and I can´t find any where, but a photo I opened can´t. What should I do?

  check c > program files > adobe > adobe first pro cc 2015, assuming that it was the cc version 2015 you have installed.

• File open problems removal

  How to remove the program open a file when adding deletion not to do so. I think that the File Open program blocking the download of Adobe Reader software.

  Try to download the installer from the http://get.adobe.com/reader/enterprise/ reader

• Windows8 tile problem - when I click on a tile, it opens, then closes instantly...

  Windows8 tile problem. When I click on a tile, it opens, then closes instantly. I have studied the site of Microsoft to solve this problem, but all attempts have failed. I tried to click with the right button on tile and used the feature, turn off, then I was instructed to shut down the computer, restart the computer, click with the right button on tile and select turn on, it did not work. Microft offers a COMPREHENSIVE ANALYSIS of the SYSTEM using Norton. I did and it did not resolve the tile not not opening problem. Can someone help me solve this situation. Is this a common problem with Windows 8?

  My problem has been resolved. I down loaded Windows updates more added Bing bar.

  I can open the tiles now.

  Larry

• Problem correct launch of sequences shortcut on the desktop file

  I created a shortcut on the desktop that runs successfully a sequence file.  The icon I have chosen was "C:\Program NIUninstaller Instruments\TestStand 3.5\UserInterfaces\Full-Featured\LabVIEW\TestExec.exe".  The problem is the following:

  I have several set up desktop shortcuts to launch multiple sequence files.

  If the operator closes TestStand before closing the current file in the sequence, by activating another shortcut, TestStand opens with the previous sequence file loaded.  The file in the correct sequence is displayed in the ListBox on the left of the screen; However, the file of the previous sequence is loaded.  This will inevitably cause confusion with the operator.

  Any ideas will be appreciated.

  Thanks in advance.

  2 options:

  1. tell the users to close the sequence when they are made by choosing File > close all files of sequence and executions.  TestStand remembers the last sequence which was open.  He re - opens there next time that TestStand gets run.

  2. change the source code of TestExec.exe close the file in sequence on farm.  Or do not remember the open movie file.  If you are using the full user interface, you want to look in the VI called Full UI - configure Application Manager.vi which is called UI - full Initialize.vi.  You will see a property with ReloadSequenceFilesOnStart node.  Change the enum to ReloadFile_All to ReloadFile_None.  Rebuild the exe file, and then deploy it.  You will have to look for it if you use the Simple graphic interface, but it will be the same property node.

  If you go with several it's more work for you, but then you don't have the problem of the operators running the wrong test on WEAR it wrong.  Option 1 is a matter of training.

• From TestStand ExtraPuTTY installed

  Hello

  I am currently using TestStand 2012, specifically the version 5.0.0.262 according to the button ' words of TestStand 2012 ". I would be interested in using ExtraPutty to send commands to a test remote computer using SSH. I came across the following of document http://digital.ni.com/public.nsf/allkb/A254FE727B22258586257B6E002DF401. As suggested in the document, I downloaded the latest version of snapshot of ExtraPutty from this page: http://www.extraputty.com/download.php. And as mentioned in the same document, I have a problem from TestStand after the installation of ExtraPutty. The document suggests to change the file ExtraPutty.ini residing in TestStand 2012\Components\TypePalettes so that the version numbers correspond to the version of my installation of TestStand. In fact, I can find a file named 'Install_ExtraPutty.ini', but not ExtraPutty.ini.

  In Install_ExtraPutty.ini, I found several seemingly relevant entries such as "Prodversion, TypeLastMod, Version", etc. Most had numbers like 3.0. I tried to change these numbers at different values (5.0.0.0, 5.0, 5.0.0.262, 5.0.0.252, etc.), each resulting in the next window, after having tried to launch TS:

  

  I also took a look at the other .ini files in the same folder. All are difficult to read binary files. But I found what looks like to me (for the most part 5.0.0.0 and 5.0.0.252) version numbers which I also tried in Install_ExtraPutty.ini. Each time, the windows error above appears at the launch of TS.

  I'm running out of ideas and any help would be appreciated!

  Thank you

  Christian DB

  Hi Christian,

  Even I tried to install and it did not work in TS 2012.

  I did the following:

  Downloaded the zip - ExtraPuTTY -.zipversion (binary, help files, examples...)

  Copied from ExtraPutty.ini to C:\Users\Public\Documents\National Instruments\TestStand 2012\Components\TypePalettes

  TestStand open - it gives a conflict dialog box - choose currently responsible option.

  Close TS - it should ask to save the ExtraPutty.ini file.

  Copy the folder ExtraPuTTY-0-28 C:\Users\Public\Documents\National Instruments\TestStand 2012\Components\StepTypes\ExtraPuTTY-0-28

  Open dialogue pallets Type (CTRL + T)

  Right-click on extraputty.ini

  On the right side window select function TL_init

  Right-click Properties - dialog box opens

  Click default button of the module - Check for path of the module.

  Select the extra PuTTY DLL which is present in the folder copied above.

  Repeat this operation for all functions.

  Save the ini file (do not change versions if you are prompted for).

  There are two DLLS in the PuTTY extra folder and one more. I assume it's the extra PuTTY dll only.

  I hope this helps.