Text elements not centered more once the project goes live

Similar Questions

• Body CC - change of automatic recording location once the project is put in place

  Been charged research, have not found an answer. I know how to specify a location for the automatic backup files when you create a new project. How can I change them once the project is turned on?

  To change the setting for automatic backup project:

  1. open the project.

  2. Choose file > project... settings > disks work > automatic backup of the project.

• Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Scenario is,

  1. smart card reader is connected to the VM with card inserted in

  2 initiate a prompt suspension of the VM toolbar

  3. now to resume the virtual machine by using vmrun command into the host machine

  WS t vmrun start xxx.vmx

  Now, the recovery of VM but the smart card reader that was previously connected does not work properly in VM that is to say, sometimes after CV chip card reader driver is uninstalling and a few other times, chip connected to the drive is not available on a virtual computer

  My requirement is after power, smart card reader can stay connected to the virtual computer with the already installed driver and the smart card.

  Kindly help with this problem.

  Host operating system: Victoire 2012 R2

  The VM OS: win 10 x 64

  Thank you!!

  Dear all,

  I had a work around for this problem. By adding "usb.autoConnect.device0 ="0xVID:0xPID"" this statement to the VMX file, solves this problem, that is, whenever the VM is wake-up by clicking on the link CV or using vmrun commands, it connects the unit in question automatically and it is charging correctly with his driver. Obtaining smart card detected after sleep\hibernate with no problems.

  VID & PID is respective ID of the device that can be seen in the properties of the Device Manager "Device Instance path".

  For more information about this, visit VMware KB: automatic connection of USB devices to the virtual machine power on

  ~ Surendra

• An expression of EI is always assessed once the project is implemented in a .mov format?

  Hi all

  I am very new to AE and I m checking to see if it is possible to have an expression of AE assessed once the project is implemented in a .mov format?

  For example, I want the motion to be built to display the name of a computer of the person who plays the motion.

  Thanks for your help

  The video is video and video is not interactive. You can have interactive video players, but this isn't happening with AE. Think HTML5, javascript, or flash. You will need a custom video player and the external code.

• AE CC Mac: After Effects collect Files do not collect files, including the project!

  I need to send a customer projects collected, but the file > addictions > command collect the files does not collect some files (once the project has been reduced, so all files in the project are needed), including the project file!

  I end up just with a record collected containing a 'Pictures' folder which includes some files and others not. This is a nightmare! There are hundreds of cases that will take days, I don't have to track down each file manually.

  Any suggestions?

  J

  Hey everybody-

  Running on Mac 10.9.5 CC 2014

  I kept getting this error when you try to collect:

  After effects WARNING: the file 'filename' could not be found.

  So I know this is going crazy, but the problem was the mouse and a Wacom tablet. Whenever I gave him entry when he began to collect mistake like that. Then I tried to put in the wacom pen and clicking on save dialog enter and boom - worked perfectly. Really strange bug - I hope Adobe that address it soon. Accessories for chandra hope on creative cow to track down the problem:

  https://forums.CreativeCOW.NET/thread/2/1052704

  hope this helps, and hope, that the issue is dealt with quickly.

  Wes

• "could not open score because the project has no audio file?

  I just bought the urban package of the resource centre and transferred to 'Bridge', I double click on the file "sbst.

  to import into soundbooth and I get this, "could not open score because the project has no audio file? When I single

  Click in the audio bridge plays very well and shows the size of 4.61 file, so there are audio files, can you tell me what is

  is happening?

  After you have purchased the Pack, you downloaded a ZIP file.  How did you go to extract the contents of the zip file?

  Here are the steps I took:

  1 downloaded UrbanBundle.zip

  2. in Windows Explorer, right-click on the zip file and choose "extract all..."

  3. I extracted the contents of a folder on my Dekstop named "Soundbooth scores"

  4. I open Soundbooth and click file > open...

  5. I found the file "Soundbooth scores", open the "Urban_Bundle" folder inside of that and double click on "Wreckage.sbst".

• Videos no longer work once the project is hosted (Captivate 9)

  Hi all
  

  I built, published a hosted online which seems to me to be a fairly simple non - LMS.

  It is pretty much a straight overhaul of an older project was in need of a new look and feel, design and update of content. But the videos I use in Version 2.0 are the same exact files used in version 1.0.

  I appointed carefully and videos (mp4s) organized and placed throughout the presentation using media > video > video event > Browse (progressive download video).

  Preview mode and published project worked fine, however I noticed that at the time of publication, the videos are automatically re-named when tone was collected in the folder "vr" to simple names like "Vi2.mp4".

  Once I downloaded the project on our server any of the videos worked more. You can see what is happening here (hit launch unit, there is a video on slide 1):
  

  Strengthening of the highlights: learning that supports all students

  All you get is this delicious pre-loader Fail:

  

  Now, I thought: hey I can just go back to my project folder and type in absolute links for these vids because they are implemented on the server that is to say: http://UFV.ca/strength-demo/Unit1/VR/Vi2.MP4 ... bon ?

  I can't use the video format progressive download.

  I tried to use 'Adobe media streaming service' as it was the only one who allowed me to specify a http:// link but it wasn't a go.

  'Streaming vidéo' was a no-go.

  So I related to the renowned video in the published folder, and alas, once I re - download the project it still does not work. Hmmm, ideas?

  Thank you!

  Did you check if your server is actually put in place to allow video files of this type?  Sometimes, the problem is that your server administrator must specifically allow the file MIME type.  He could have a few changes in the server environment that have disabled now which previously worked for you.

  First crazy should check if the MP4 videos are directly accessible on the server to prove whether or not the problem is with the server settings.  If the MP4 videos can normally be served, but they are just not work for you, try to download the same zip on SCORM cloud LMS SCORM output to see if they work from there.  If they do, go back to your LMS provider and tell them that the issue seems to be with the LMS. If SCORM cloud has no problem with the content, why their LMS?

• BlackBerry Smartphones sms texts are not 'threaded' more

  My text messages are not threaded more - every single incoming text appears even if it responds to a previous text.  I do not know exactly when this happened, but it's probably in the last week or so.  I have not installed any new apps and tried a hard reboot.  The only thing that I can remember recently is to remove my account gmail and adding a different Gmail (via BIS).

  I have not found any setting in my BB "BOLD" for this and I had no luck looking for an online solution.  Does anyone have any suggestions?

  Look at the Options > SMS text > number of previous items.

  What is your set number to? Set it to '7' and then observe what does what you want.

• Menu text does not show up with the new update

  When you use the new reactive update in Adobe Muse, the Menu text is not displayed when the image previewed in the browser. It appears on all pages when publishing in Muse.

  Is this a bug or I do something wrong?

  Thank you!

  Select menu and confirm that it is not browser pinned to the bottom of the browser window or define a footer element (which would cause it to move down in the white area). You can also temporarily replace the filling of the page to help you determine where the text is moving to.

• First Elements 11. Cannot open the project (file PREL) in point 8.1 of Windows.

  I created the project (file PREL) in the first 11 elements in the Windows 7 Professional environment. I was able to open it without problem.

  Now I have Windows 8.1. When I try to open this project, I have a saying "this file type is not supported, or the required codec is not installed."

  Help!

  Levalt

  Thanks for the reply.

  When you import media source in a first Elements (any version), you are not importing real media. What you have in the media of the project are copies of the originals which are stored in the designated place hard drive. But the project needs to trace these originals to the save location as they were when they were imported in the project. If you move the source media, delete rename them or even that they are in the folder, you will encounter some bad media reconnect issues. At this point, the message "Where is the file...?" that you get when you try to reopen the saved closed project will be a major asset by her reconnects. Alternatively, you can use the function replace images for her reconnects.

  The following links go to the above factors...

  http://help.Adobe.com/en_US/premiereelements/using/WS09e4b3c48f3a79fc19b622510385d4355c-7d cb.html

  http://www.atr935.blogspot.com/2013/04/pe11-replace-footage.html

  Troubleshoot damaged projects | Adobe Premiere Elements

  Do not hesitate to ask if you have additional questions on this or need for clarification on what written.

  Best wishes.

  RTA

• How to get the text that is centered vertically in the box of Li

  I update the website of our company in another area of the system is why you will see a tf in the web address, that I am about to give.

  http://www.essentialfinance.NET/TF/products/reconciling/accruals_manager.asp

  Now, the problem I have is that the options in the boxes are aligned at the top.

  I had a problem understand quite how to get these boxes to work so that they show when hovering etc, but eventually came through a tutorial that appears to create a class of nav hanging to the ul.

  I tried to change all ul.nav, li ul.nav, ul.nav one is regarding the text vertical alignment centered but without success.

  The css file is here:

  http://www.essentialfinance.NET/TF/main.CSS

  I put this link because someone may be able to choose my faults.

  I just put a link to # (not going anywhere) to get the < a > code initialized...

  In fact - don't worry about the color scheme... it's only temporary to test the feature.

  And I would not wander anywhere else on the site - it's a shambles that is why I am interested in it.

  Can someone please advise? Thank you very much in advance for any comments.

  Terry

  For the ul.nav one rule, delete the height attribute.  Then add the padding attribute in this same area.  The padding will give you the height of the button you are looking for without setting the height, which is the typical way to do it.  About 10 to 15px padding should do the trick.

• Text custom not appearing only on the stage if not preloaded.

  Hello
  I've added the page to the stage, and if I test using ctrl + enter, it does not appear. If the swf file "charges" / "simulate the load" and then the text shows, but not in the correct font.
  
  This is the error when the SWF is not preloaded:
  VerifyError: Error #1014: class flashx.textLayout.container::ContainerController not found.
  
  at flash.display::MovieClip/nextFrame()
  at spot_fla::MainTimeline/l()
  
  I recently added a preloader AS3 (CS5) that is when it started. Library mc items were set to export in frame 2, but the police is not displayed. The police has been incorporated as well but link/unlink it does nothing. The preloader AS3 is a simple script that lots of tutorials online use. Let me know if you want that it sent.

  The "Advanced ActionScript 3.0 Settings" are default except:

  Export classes in the framework: 2

  Preloader method: loop custom preloader

  The textfield object is located in the frame 2 of the scenario and is not referenced in As however, he is inside a mc that has a mouse on it (mc) listener.

  
  Is that what the problem of ideas? Thank you.

  Use the classic text instead of TLF if really not necessary.

• Element not found error despite the use of cfparam

  Hello-
  
  I was hoping that someone could identify the problem with my form. Despite the fact that I set all my entries with cfparams at the top of the page, unless all fields are completed, I get 'Undefined Element' errors do not filled in all the fields.
  
  I don't see a "Join Code" button so here is a link to a zip file of the page. Please let me know if you need anything that anyone else.
  http://www.sfcatholicschools.org/new_employee.zip

  I use the cfparam in the action page, and not on the original page. In this way, if a field has come without value, it now has one.

• New methods in the project request module not available to view the project

  Hello
  
  I have migrated from 10.1.2.3 to 10.1.3.4 JDeveloper and received the application (Struts base) upwards and works well.
  But when I add methods to the ApplicationModule class, is not available in the classes of the action in the draft opinion.
  
  In the project settings for the draft opinion, the model project is in the list of dependencies.
  What will take to make it work?
  
  Kind regards
  Terje

  Hello
  just my experience:
  You must remove all the way classes (model view controller) and then rebuild the model and the view of the controller. JDev sometimes left a few old files, classes and never build them again even if you have changed the java file. I never really learned when this happens, so there is no test case to reproduce this. We use an ant script to clear the path of classes before you rebuild an application.

  If the error persists after this own reconstruction, debug the application and the st a breakpoint in your action class where you get the module of the application. Then check the class of the returned request module. If you see a class of the type of your ApplicationModuleImpl, you should be able to access your methods. If you do not see your ApplicationModuleImpl something wrong with the cpx-file configuration struts - config.Xml.

  Timo

• TripAdvisor.ca does not answer more to the clicks of the mouse on the Web page, such as the drop-down list to disconnect. It started with the last update.

  As I downloaded the latest version of Firefox (29.0.1) I have problems with the webpage Tripadvisor.ca . The mouse may not seem to work on Web pages. For example I can't select a tab to view pictures or details of a vacation rental. Also I am not able to use the drop down menu next to my username for me to disconnect it.

  Does anyone have a solution?

  I found that after Firefox v29, a LOT of my settings and
  
  Add - ons have been changed / reset. Try this;
  Launch Firefox in Mode safe
  
  While you are in safe mode;
  
  Firefox Options > advanced > General.
  
  Find and stop using hardware acceleration.
  
  Then check ALL your settings. Browser and Add-ons. Then restart.