text\graphics prints 75% smaller

Windows 7 pro 64-bit. hp ojprol7x00_full_14 - software.

HP p7 - 01380t

Reinstalled the printer software today to try to solve the problem of size. No luck.

Tried settings and the HP site but no luck.

Thanks for any help.

No problem. If you need anything else, let me know.

Tags: HP Printers

Similar Questions

  • When I print a booklet in word 2010 the text prints really small. Only, it takes 1/4 page and should be 1/2 page. I don't know how to fix it.

    When print my document in booklet form always prints very small text. If small the page takes only 1/4 of page of the book when he should be taken to the top of the opening page of 1/2. I don't know how corect the problem. Any help would be aprisheated.

    You'll have more luck asking experts in the Word 2010 forum.

  • Printer HP PhotoSmart C309g print is no longer black text, graphics, etc.

    Hello:

    We have a HP laptop.

    We have a C309g wireless HP PhotoSmart all-in-One printer/scanner/copier.

    It has worked very well for a few years, until 2 days ago.

    It allows to print is no longer in black (colors and black Photo work very well).

    We have it removed... removed all ink cartridges, removed the cartridge caddy,

    clean the electrodes, replaced the caddy, installed 5 cartridges (all) new, etc.

    We went through the process of removing the cartridges, caddy, locking,

    remove the power cord, wait a few minutes, and then make the process reverse.

    When you turn on the printer, it does its auto-check/install and after about 4-5 minutes

    We said that the installation failed, the press the OK button.

    We went thorugh this process several times, and the facility has failed every time.

    In the past, installation of printer cartridges, cleaning, calibration... executed quickly.

    The printer will not print anything that is black, that he me a print from Word, Notepad,

    make a direct copy of the glass, etc... together, with the phone on or off, but it will not

    print anything in black standard.

    The colors and black Photo print correctly but the regular black does not.

    The output of the other 4 cartridges are sharp, crisp, etc..

    Anything... text, graphics, etc. in the standard black does not print.

    Any ideas.

    Thank you

    -DaleBr

    OK, I understand you have checked the vents and they were OK (or you clean them?).

    Have you run three rounds of cleaning of the façade?

    Did you soak the printhead?

    If you've done everything above, I've seen a few cases was a hard reset solves the problem.  To do this turn on the printer, then unplug the USB cable from the printer and then unplug the power cable from the printer for a minute.  Then replace the power cable and turn on the printer, then replace the USB cable.

  • Graphic printing without cursors

    Hi all

    I have a graph with a vertical sliders. The problem is that I want to print the chart but without the sliders so I have to make invisible before printing, and then print the chart and finally, after printed graph to make them visible again. The problem in doing this is that the user sees how the sliders are hidden before printing and shown after printing and I don't want. So is it possible to print the graph without cursors when they are currently visible?

    THX.

    Hello

    I found a pretty easy solution for this.

    Look at the code below.

    using System;
    using System.Collections.Generic;
    using System.ComponentModel;
    using System.Data;
    using System.Drawing;
    using System.Linq;
    using System.Text;
    using System.Windows.Forms;
    using System.Drawing.Printing;

    namespace PrintingWithoutCursors
    {
    partial class Form1: Form
    {
    public Form1()
    {
    InitializeComponent();
    }

    private void Form1_Load (object sender, EventArgs e)
    {
    xyCursor1.BeforeDraw += new NationalInstruments.UI.BeforeDrawXYCursorEventHandler (xyCursor1_BeforeDraw);
    }

    Private Boolean print = false;
    void xyCursor1_BeforeDraw (object sender, NationalInstruments.UI.BeforeDrawXYCursorEventArgs e)
    {
    If (printCursorCheckBox.Checked == false & print == true)
    {
    Cancel the drawing if cursor
    // 1. "Print" key is clicked, which is printing = true.
    and 2. cursor to print checkbox is activated...
    As the slider is not to shoot by canceling the drawing.

    e.Cancel = true;
    }
    }

    private void button1_Click (object sender, EventArgs e)
    {
    Graphic print here...

    print = true;
    Print();
    print = false;
    }

    Private Sub Print()
    {
    Write code to print here

    The PrintDocument PD = new PrintDocument;
    PD. PrintPage += new PrintInkEditForm (pd_PrintPage);
    PD. Print();
    }

    Image bitmap b;
    Sub pd_PrintPage (ByVal sender As Object, e of PrintPageEventArgs)
    {
    create a bitmap
    b = new Bitmap (waveformGraph1.Width, waveformGraph1.Height);

    Plot the graph of a bitmap image
    waveformGraph1.DrawToBitmap (b, new Rectangle (0, 0, b.Width, b.Height));

    Draw the bitmap to the printer graphics object
    e.Graphics.DrawImage (b, Point.Empty);
    }
    }
    }

    This is what my screen looks like:

    The check box is selected, cursor is printed if no cursor is printed. But still, the chart on the form indicates the cursor.

    I hope this helps.

    Kind regards

    Habim stone

    National Instruments

  • How can I edit a PDF file to have an expanded text box and more small margins?

    I just read a long discussion initiated by a guy who wanted to reconstruct a PDF file to print less pages. I do not ask this topic. I am aware that Acrobat 9 Pro will not recompose the pages in a PDF for you. as someone has said, it is not a word processing program. I want to copy a PDF file into a new file with an expanded text box and more small margins, so I can read it more easily. My view is not so great.

    I try to print a U.S. supreme court decision, for my study. The problem is that these PDF files of such decisions are composed of 10-points with generous margins, in pages of Folio-size smaller than 8 1/2 x 11 "." When you open PDFs of these decisions, you get the margins very broad and relatively small characters. Essentially, I would like to re-rasterize the document so it prints on my 8 1/2 x 11 "paper in a larger size of apparent type, but at the same high resolution as the original. Moreover, the decision that I'm getting is almost 200 pages long, so I won't do that, of course, in a page-by-page manner.

    I guess I could do it in Photoshop, in pages to blow and their culture. Photoshop does a good job of eliminating aliasing when you do this. But it seems to me better to re-rasterize pages of the source PDF file. If any player would be nice enough to explain this process? (I'm fairly warned in Photoshop, Illustrator and printer of computing concepts, but a complete newb in Acrobat).

    If you want just this for printing, one thing you can easily do is to crop all pages to remove the margins. For example, you can RP 2 "on the left and right sides, and 1.5" off the top and bottom. Then print using a Scaling of the Page to "adapt to the printable area.

    To crop in Acrobat 9, select: Document > Pages of culture

    Be sure to select all for the page range.

  • Why my text on screen become small suddenly? I restored it but I want to know why this happened?

    Why the police on my text suddenly become so small? Please NOTE that I corrected this problem, but I want to know why he has done in the first place as I scoured her internet and can't find the answer?

    Sounds you zoom a page by accident.

    You may have done this via Ctrl and - or keeping the CTRL key and turning the mouse scroll wheel.

    Reset the zoom of page on pages that are causing problems.

    • View > Zoom > reset (Ctrl + 0 (zero); 0 + Command on Mac)
  • Photosmart 6520: Prints too small

    I'm more able to print a normal size postage label. I used to and now suddenly it prints so small that there is no way a factor could read them. Any ideas?

    Hi @Pattinyk.

    Welcome to the Forums of HP's Support. May be that the print settings need to be adjusted. You print what program postage labels?

  • Microsoft Paint - Image is normal on screen but prints too small?

    Microsoft Paint - Image is normal on screen but prints too small?

    When I'm in the paint all my settings are the same that I use always and my image appears normal size on the screen but when I go to print I put it on the scale to fit on page 1 x 1 (so it's all about a piece of paper), but then I have print preview and the image is just a 1-inch picture in the upper left corner. I had done several times in the past and never had a problem. Why does the image offset? Also when I remove the scale down to 1 x 1 page it can tile the image on 4 pages. So if the image is the great whys it shrinks it do much when I as a single piece of paper? Help!

    Go to the options of paint by clicking on the top left of the menu bar icon (the one to the left of the 'Home' that looks like a sheet of paper lined w / an arrow next to it).  Choose 'Properties' from the menu drop down.  Keys to your measurements of paper (ie. 8.5 x 11 "or 8.5" x 14) depending on the direction you have chosen - portrait or landscape (under print options: Page layout) which should solve your printing problem.  Unfortunately, the program seems to use some default preset every time that you open the Paint program.  That's how I came across your question;  I'm trying to find how to change the default setting. During this time, I guess that we just have to continue to change it before printing.

  • HOW TO SELECT FONTS IN Microsoft generic/text only printer

    Hello

    How can I change the font of TEXT ONLY printer by using the tab selection of police under the PROPERTIES MENU in xp?

    Thank you.

    Please be patient and wait for the answers in your original thread...

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-hardware/set-the-font-of-generic-text-only-printer-as/6c96f5e4-845f-4935-9105-b22cbb684c38

  • My Dell V305 printer prints very small. How can I get to fill the page?

    My Dell V305 printer prints very small.  How can I get to fill the page?

    Hello

    Were there any changes made on the computer before the show?

    Method 1:

    I suggest you to refer to the article and see if it helps:

    Resources for the resolution of the printer in Windows XP problems

    http://support.Microsoft.com/kb/308028

    Method 2:

    See the articles and check if that helps:

    To set printing preferences

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_setting_document_defaults_personal.mspx?mfr=true

    To set the properties of the printer

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_setting_printer_props.mspx?mfr=true

    Settings that affect printing

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_c_properties.mspx?mfr=true

  • My HP PSC 1210 Al lin One xi does not print the small print on a soup Plantation coupon

    My HP PSC 1210 xi all in one printer does not print the small print on a soup Plantation coupon. I was able to print very clearly a letter that I had written and recorded in the notebook. Printing in Notepad is quite small, but it is still much more that the small print in the coupon which wouldn't not print... I printed these coupons several times before without a problem. Also, the small print very clearly appeared on-screen.

    Ron Nimmo

    Hello

    1. do you get an error message? If Yes, what is the exact full error message?

    2. are you trying to print online or that you have the coupons saved on your computer?

    3 If printing online, what web browser do you use?

    4. is the specific question about the site?

    Follow the article:

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    If still the problem continues contact HP support for help.

    http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=90767

    Hope the above information is helpful.

  • Printer prints really small in Windows Vista.

    Original title: lost by default on the computer is to tap printer want small return to factory settings, how do I do?

    I would like to set printer back to factory cnat seem to have happened for printer and choose the default settings but still feel really small... Thanks for help

    Hello

    1 did you change on your computer before this problem?

    2. you receive an error message?

    3. What is the brand and model of your computer and the printer?

    Is this a problem with a specific application or all applications?

    You can read the article and see if it helps.

    The problems of fonts

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-font-problems

    See also:

    Choose printing options

    http://Windows.Microsoft.com/en-us/Windows-Vista/choosing-print-options

  • HP Photosmart C4480 - blurry text when printing *.pdf

    Hi,

    I seem to be a common problem but can't seem to find a common solution. I have a printer [HP Photosmart C4480] who works well for ages. Now, however, seems to have problems printing pdf. As I said (or rather typed), This seems to be a common problem. In other sources on the internet, it is described as dark printed text or text that looks blurry (for example, here). It seems also the text is printed in a shade bluish the color of the font of the text itself is black. Just for the record:

    -J' restarted my computer. 3 times;

    -J' have 2 new hp original cartridge in the printer. The printer is aligned cleaned and everything;

    -L' printer is OK with other files (meaning not being not not *.pdf);

    -This isn't the files. They are ok. It's several files from several reliable sources (for example, my University) that all print sharp printers not HP. I would include a sample attachment, but I can't... O well. I'll add a link. You are here. (* Edit: link has been removed after the problem has been resolved).

    -The problem with the same printer on 5 consecutive laptops running Windows XP upwards and up to what Windows 8. All have the latest version of Adobe.

    -Adjustment of the color to print in black and white (only black and white) does not deny the problem.

    * Edit:-connected via USB.

    * Edit:-portable Test computer running Microsoft Windows 7 x 64 Home Premium (Microsoft Windows 7 Home Premium
    Version 6.1.7601 Service Pack 1 Build 7601).

    * Edit 2:-tried another cable USB (thanks for the suggestion Rich1!). Unfortunately, no results .

    * Edit 3:-problem solved partially. Software incompatibility between HP and Adobe. See the workaround. Only works for gray-scale printing.

    * Edit 4: Rich1 helped me to identify the problem. Seems that when printing the PDF files, the printer does not seem to use black ink and in turn simulates black by combining the primary colors (which gives all the quality of the results, where the blur). This problem also exists in Acrobat with Foxit substitution (for example).

    With sincere friendships.

    J

    I think I've solved the problem, even though it may persist in color prints.

    HP, this seems to be a widespread between the printing software and Acrobat Reader problem. I suggest that you find a more permanent solution. First mention of the problem lies in 2008 and it is widespread, but you seem to be ignorant.

    As to the question.

    This question seems to raise its ugly head after an update to Acrobat Reader. Several sources confirm this. As is the case, software HP seems to be an incompatibility with Acrobat Reader. It sucks because it is the most popular format for sharing on the internet of documents.

    As for the solution.

    1. do not use any web application to print. Save the file. Open it in Adobe Acrobat Reader;

    2. open the print menu [file > print];

    3. click [Advanced] at the top right of the screen.

    4. under color management, check that box to the left of something to the effect of "let the printer choose colors". (I have an English version of the software Acrobat Reader installed, bear with me. Press [OK];

    5. to return to the main print window, go to the menu of [Properties] in the top right of the screen. It should be next to the menu advanced;

    6. in the Properties menu, select the [color] tab. Once there, select an item to the effect of "print in grayscale". Directly under this option must be a menu drop-down. In this menu, select "use only black ink. Press [OK];

    7 print the file. As long as you print in black and white, the focus should be good.

    Hope this helps someone else! If you like my solution, give this guy there Rich1 some kudo is such that at least he had the kindness to answer and help me solve this problem.

    Thank you!

  • printerHPdeskjetF4140 prints very small and slow

    my printer HP deskjet F4140 when printing from internet print very small print and print very slowly. Print also more than selected pages. Example I request a copy of the article on the internet and I get 5, 6 or 7 copies in very small print. Thank you

    Greetings!

    OK, well, when you print, use file > print or Ctrl-P on the window that appears click Preferences, and then click the effects tab.  See if you print in Acutal size, like this:

    If I helped you with your problem please mark as resolved

    * You can say thank you by clicking on the stars Kudos *.

  • range of HP Office jet 5850 printers will not print. Small yellow light flashing. Ideas for a cheap solution?

    Printer HP 5850 deskjet ceased to print.  Small lfashing of yellow light.  Help!  Thank you.  R.

    The troubleshooting steps described in this document can help solve the problem of flashing lights on your Deskjet 5850.

Maybe you are looking for

  • V22 Firefox cannot open emails in Outlook, Internet Explorer works, the problem began July 19, 2013

    V22 Firefox since July 19 could not open emails or look in the folders in MS outlook. Internet Explorer works well. I reinstalled firefox v22 but no change

  • How to access the mails Exchange?

    Hello My company uses Exchange server. I tried to use mail on El Capitan, but it downloaded all the emails and devours the capacity of the disk. Some articles were advised to log on to 365 portal, but it advisable to download the MS Office package, I

  • Cannot depend on ReadyCLOUD (Pioneer Pro)

    Hello I have a Pioneer Pro upgraded to OS6. 6.2.4 ReadyCLOUD worked completely fine. I've just updated to the latest 6.4.1 beta 3 and I can not get ReadyCLOUD to switch on it. I tried to leave and add account several times, rebooting between departur

  • for distribution to the rajasthan or mumbai

    Hello I am the computer owner shop in hometown in India, now I want to become an authorized dealer of Dell products such as laptops and PC to the rajasthan or mumbai. Thank you best regards &! Mujahid Ahmed

  • FlexVPN and OSPF question

    I have a problem with rountig OSPF on the routers configured in the hub-and-spoke topology. One question is on a course that OSPF don't advertise hub to rays. Created on a hub, router subnets are not seen on the rays, but new added subnet on talk app