Text in black with white border

Hello

I draw a text on the map with drawText and the text color is black. I want the text has a white border for visibility.

Something like this:

Is there a solution for this problem?

THX,

Andy

Advertisement

Try this:

paint the text to the x - y, y-1 in white

paint the text to x + 1, y + 1 white

then paint the text in black to x, y

This should give you a reasonable facsimile of what you are looking for.

Tags: BlackBerry Developers

Similar Questions

  • iPhone 6 my screen is all black with white lightning

    The screen is all black with white flashes when I turn it on. Is it a broken screen / digitizer or would it be a hardware problem? This also happened to me a months I did a factory reset. The screen flickered a few minutes after, but was wrong after that until now. Tried to do the same thing again with no luck.

    I suspect a hardware problem. But try:

    -iOS: do not respond or does not light

    https://support.Apple.com/en-us/HT201412

    -Also try DFU mode recovery mode post-test

    How to put iPod touch / iPhone in DFU "Karthik doodles."

    https://geekindisguise.WordPress.com/2009/07/16/how-to-put-iPod-touch-iPhone-int o - dfu mode.

    -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

    -Try a different cable

    -Try on another computer

    S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

    How to make a genius bar appointment? Apple support communities

    Shop Apple Store - Genius Bar

    https://www.Apple.com/retail/Geniusbar/

  • Import of bitmap images with lingo (importfileinto) WITH white border

    How can I import files jpg with jargon (importfileinto) WITH white border?

    You can use a list of options with importFileIntoand set a #trimWhiteSpace property value of 0;

    vMember = new (#bitmap)

    vOptions = [#trimWhiteSpace: 0]

    vJPG = "Path:To:Your:test.jpg".

    vMember.importFileInto (vJPG, vOptions)

  • LR 4.1 export with white border

    I see there is a way to export a photo with a white border using the print module but is there another way? (I know that I can use CS5)

    Maybe a nice plugin?

    Mark has soon

    The Mogrify Plugin will do that for you: http://www.photographers-toolbox.com/products/lrmogrify2.php

  • Screen on Satellite C series is black with white writing

    Hello

    I need help, I've only had the phone for a few weeks so still to get used to it. (first computer).
    It was working fine but now I have a black screen and all the writing is white and yellow.

    Either I or my children have touched something we shouldn't have, it still works very well that the screen is annoying
    and not all icons appear.

    Also need help with a printer to use with this laptop, which is best to use.

    Thanks for any help you can give me Jo.

    > It was working fine but now I have a black screen and all the writing is white and yellow.

    Please don t be angry with me, but your description isn't very useful.
    First you don t say anything on your laptop model and the system you are using.

    Secondly you said something about white and yellow writing on the black screen, where did you see that?
    It is not by using special software such as Microsoft Office Word?

    Please share more details with us!

  • SCREEN BLACK WITH WHITE AFTER START POINTER

    I went on vacation and turned off my computer.  When I got home, I stupidly plugged in my blackberry storm, while the system was starting the system.  Now all I get is the black screen with the white pointer stupid.  I tried the solution of Task Manager and a few others who were listed in the similar questions to no prevail.  At one point I did a boot repair tool and he returned with it could not repair the iso standards, ico or something like that.  I did a system restore to an earlier date to before I left and that did not help.  Please help me.  Thank you.

    Hello

    You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
    Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
    on devices and UNINSTALL - REBOOT.

    Another method to try to get to the desktop (try in normal Windows Mode without failure)
    CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
    on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
    by tapping F8 as you start several times.

    First check this thread in case it is simple and if not to come back to this thread.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

    Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
    That there is no information on a black screen as it is on a blue screen just adds to the
    Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
    Google to see the proposed repairs, whom some have worked however these cover a wide
    field efforts.

    Here's a video of one of them.

    http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

    Here's another fix
    http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

    You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
    system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can create a recovery disc or use someone even version (making the system restore it)
    must be bootable).

    How to create a Vista recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    ------------------------------------------------

    These require the correct Vista discs since you can not start safe mode.

    Try the Startup Repair tool-

    This tells you how to access the System Recovery Options and/or with a Vista disk
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    -----------------------------------------------

    Here are a few Google searches where many have found different solutions:

    Vista black screen - check that a 1st
    http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

    Vista black screen Solution
    http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

    Vista black screen Fix
    http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

    -----------------------------------------------

    If necessary and you can access all ordinary Windows.

    You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
    (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

    You can use another DVD that aren't copy protected but you you need to own
    Product key.

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    If nothing works, you can make a repair facility that must save the data but you will need to
    Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
    need to know your product Code.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    ---------------------------------------------------------------------------

    Another method that works sometimes: at the command prompt, type of Vista startup disk:
    (a line type or copy and paste one line at a time and hit enter - enter a bracket)
    or "BOLD")

    c:

    cd\

    CD c:\Windows\System32\winevt (there is a space between cd and C :)

    Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

    RESTART Windows

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Text Wrap, image with white background

    CS4 Mac Tiger - when using Quark, I am able to import an image (see image of Zebra head) with a white background (effectively a cut without a route clipping) and tell Quark to the text "wrapping" of the image regardless of the white background. In InDesign, seems to only be able to do if I actually change the shape of the box to resemble the image of the picture. Am I missing something, or this function does not exist in InDesign

    PS. bear in mind I do not always come the image and the design of magazines too Photoshopping does not allow date limit.Picture 1.png

    ID has some pretty sophisticated packaging options. Go to object > Clipping Path > Options... If you do not have a channel alpha in the image file, or a clipping path, choose edge detection and play with the sliders. A string created in Photoshop, where it is relatively easy to isolate the background will work best, however, 99% of the time, or by removing the background entirely if it is an option.

  • setttings seem to have changed, now black background with white text. How do I change back? ___

    The settings seem to have changed (CAT sleeping on keyboard) wallpaper now black with white text and how the format appears on the screen has been altered.  How do I change back?

    The settings seem to have changed (CAT sleeping on keyboard) wallpaper now black with white text and how the format appears on the screen has been altered.  How do I change back?

    > How the format appears on the screen has been altered.
    I don't understand this part. Maybe you don't mind developed.

    Do a system restore. Pick a date before that happen as your restore point.
    Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
    To sit and wait. The machine restarts when it's done.

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • HP Color Laserjet CM1312 / Windows 7 / Microsoft Office Word 2010-> black and white text only

    I bought a HP Color Laserjet CM1312 and plugged on my 32 bit Windows 7 PC. Of course, I downloaded the newes of HP drivers. Then, I wrote a text in Microsoft Office Word 2010. Parts of the text in red. When I printed this text, all the text was black and white. No color.

    Also, when I print PDF documents with colored text or grafics, it is printed in black and white.

    When I include an image in color in my word document, then the image is printed in color, but not the text.

    How can I solve this problem.

    Thanks for a quick reply.

    Erich

    The problem has been resolved with the HP PS universal print (v5.1) printer driver.

    After several hours of a kind of obstacle course, I come to the conclusion that HP is

    wonderful printers

    but poor software .

  • Boots Vista black screen with white cursor and nothing else (Black Screen of Death)

    After a download from Microsoft update last week, my system has rebooted. He first had a screen blue error, rebooted, reported a disk error and automatically run CHKDSK. Since then, the system has started a black with white slider screen and nothing else. This happens at startup options (Normal, safe, safe with the last command good known configuration). Not even sticky keys would come to the top. CTRL-Alt-Delete, Ctrl-Alt-Esc and all other keys has nothing did. Even with a right click.

    I searched all over the web for solutions. I found (and tried) several over the past week, but nothing has worked.

    Here's what I tried...

    F8 held key on boot to the top and entered the startup recovery. Ran of recovery. Initially so found of disk errors. Those fixed. Then he said he could not repair the system and reported two pilot errors.

    Tried system restore. He said that I had no restore points (even if I know that I had before).

    With the help of recovery options, I went to the command prompt. Asked to RegEdit and load the Software hive. Checked the connection entry Windows NT; made sure, it has been set to explorer.exe

    The system, checked RpcSs Key hive. Already the NT AUTHORITY\NetworkService value

    Renamed event connects winevt and not create the Logs folder

    Removed the hard drive. Attached to another system (as slaves), and the registered file permissions. They have screwed everything up. The fixed file permissions and drive put back in original system.

    Œuvres self-retaining keys now. Do not, however, as my sticky keys doesn't have a link to configuration.

    Went back into recovery startup via the F8 key at startup. Now, when I run start recovery, it says that everything is going well and there is no problem.

    I have download the hotfix from article 977675 Microsoft, but I don't know how I can apply it without being able to get into windows. I would like to contact MS e-mail or chat support, but I can't get the product ID without being able to connect (frustrating talk).

    I would like to reinstall OS, but HP does not provide an installation disc with their systems (only a full restore partition). My system is backed up (with the exception of the Windows folder), but I really don't want to have to make a full recovery, as I have a lot of specialized programs and settings that would probably take me a week to re - install and re - set.

    Anyone have any new ideas?

    Hello

    Here's my usual BlackScreen convenience store, because it may be that you haven't tried
    or if you have access you might be able to come back and start some of them.

    ----------------------------------------------------------------------------------------------------------

    You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
    Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
    on devices and UNINSTALL - REBOOT.

    Another method to try to get to the desktop (try in normal Windows Mode without failure)
    CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
    on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
    by tapping F8 as you start several times.

    First check this thread in case it is simple and if not to come back to this thread.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

    Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
    That there is no information on a black screen as it is on a blue screen just adds to the
    Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
    Google to see the proposed repairs, whom some have worked however these cover a wide
    field efforts.

    Here's a video of one of them.

    http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

    Here's another fix
    http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

    You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
    manufacturer will sell them at low prices. Or try in safe mode if you can get there.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can create a recovery disc or use someone even version (to do the system restore there only to)
    being bootable).

    How to create a Vista recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    ------------------------------------------------

    These require the correct Vista discs since you can not start safe mode.

    Try the Startup Repair tool-

    This tells you how to access the System Recovery Options and/or with a Vista disk
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    -----------------------------------------------

    Here are a few Google searches where many have found different solutions:

    Vista black screen - check that a 1st
    http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

    Vista black screen Solution
    http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

    Vista black screen Fix
    http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

    -----------------------------------------------

    If necessary and you can access all ordinary Windows.

    You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
    saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

    You can use another DVD that are not protected but you will need to copy you have the product key.

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    If nothing works, you can make a repair facility that must save the data but you will need to
    Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
    need to know your product Code.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    ---------------------------------------------------------------------------

    Another method that works sometimes: at the command prompt, type of Vista startup disk:
    (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
    or "BOLD"
    )

    c:

    cd\

    CD c:\Windows\System32\winevt (there is a space between cd and C :)

    Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

    RESTART Windows

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Black and white gradient?

    I am a tutorial and select a fill of a shape and choose the black to white gradient in the gradient panel grade

    1. I don't seem to have the black and white gradient. I don't see the fade to black shade of gradient. Is this the same thing, if not how to black with white shade of gradient?

    Thank you.

    This is the problem of the value by default is black to white this is what you're missing. You may accidentally selected among other predefined gradients and the default value is lost and you must re-create or reset preferences and then save before you perform a new or create a new document that he will also receive. But to do with the document you now you must re-create it. Watch the videos

    http://www.wadezimmerman.com/videos/BWGradient.mov

    http://www.wadezimmerman.com/videos/BWGradient2.mov

  • How can I change the beige tabs with white text to the text of the tabs beige with black (or another dark color)?

    Classic restoration changed by FF 29 tabs beige with black text on the tab active and beige with white text on other open tabs. The white text is not visible. How can I change the text in white with a darker color?
    If this cannot be done, is there a way to reinstall FF 29 with just the security updates (and not all the other stuff) so that I can keep my 28 FF settings? Thank you.

    1. Open the modules (Ctrl + Shift + A Manager; Mac: Command + shift + A), then the Extensions category.
    2. Beside the classical restaurant theme, click on the Options button.
    3. Click the custom colors tab, then the less than (active/hover/default) tab.
    4. Below (active) tab, check 'Text', then click on the color swatch and choose black.
    5. Click the tab (unread) / new tab.
    6. (Unread) tab, check 'Text', then click on the color swatch and choose black.
  • Hi, im changing a sheet with writing on it (true leaf scaned) it's an old technique (90) and I wan't my text color is similar to that of the sheet (the color is spotted with black and white noise)

    ABM Verso - Copie test.png

    Hi, im changing a sheet with writing on it (true leaf scaned) it's an old technique (90) and I wan't the color of my text to be the same as in the worksheet (color is spotted with black and white noise) as you can see...

    Add a new layer above your text. Fill it with 50% gray. Add a bit of noise:

    Set the blending mode to lighten:

    Add a Gaussian blur to match the other text:

    Usage levels to set the contrast:

  • PSE10: how to create the white text box with text in black? [was: question]

    trying to create a white text box in photo shop element 10 and black text, so write pop can not understand

    Open your photo in the complete edition

    In the top menu click Layer > New > layer & OK

    Select the rectangle Selection tool

    Drag a box on the top you photo where you want to place the text

    Ensure that the chip of high color at the bottom of the tool palette is set to white or press D to default to black & white, and click the rotation arrow to move the black chip behind the white chip

    Select the paint bucket tool and click in the middle of your rectangle to fill with white

    Go to the layers palette (window > layers) and put highlight the top layer then lower the opacity to around 50% slider

    Select the T tool and type in black, then save.

  • Does not recognize a narrow black border a white border when printing without margins

    Photosmart D7460, Vista 64 bit,

    If I put a white border around a picture with a narrow black border outside a photograph and select borderless printing knows no black and white borders and prints the image within the borders to the edge of the page.

    If I want white edges around pictures and a full letter size print, I get a border that is wider at the bottom than at the top of the page.

    Can I configure it to print even a white border around the photo of the letter size?

    and

    Can I get the printer to recognize a border color around an image when printing without margins?

    I have only access to the X 2 version, here's a predetermined print schema.

    Note the Center on the page option.

    You can use the balance: option to increase or decrease the white border.

Maybe you are looking for