Text is a little fuzzy as?

Similar Questions

• 4 b 5 text is a little fuzzy on most of the sites; text has been clear in 4 b 4 and earlier versions. How can I fix?

  http://imgur.com/av4aa.PNG

  On the left is FF 4 b 5, with a slightly blurry text on Lifehacker. On the right is Chrome 6.0.472.59 beta, without the blurry text.

  I must emphasize that the fuzzy text was not a problem in FF 4 b 4 or an earlier version.

  I also upgraded later to b 4, 6, and the same problem is present.

  If you set mode mozilla.widget.render in: config to 0 (default is - 1) your text will look also pleasant again.

• Text of the multiState Fuzzy DPS object?

  I'm doing a few captions for my publication and for some reason when I preview the files, both with the Office Viewer and preview option and download the folio and test it on my iPad, the text comes out fuzzy.

  Multi status objects are very simple.  A State is a vector icon, I created in Illustrator, state two is a white box behind a block of text that is grouped.  All the elements of State 2 are made in InDesign.

  Here's how it looks in InDesign:

  

  This is what it seems on the iPad Viewer and desktop line:

  

  Any ideas on how I can fix this?  It's pretty boring.

  Use 23 output tools and create the article/folio with PDF compatibility. Choose vector in the slideshow pane in the control panel overlays Folio.

  Bob

• A little fuzzy with #body - apple

  Problem: After the change of style, click space is in the wrong place.

  This could be a firefox problem 45.0.1?

  Details: When the CSA style rules contain:

  {#body-apple}

  Width: 100%! important;

  min-width: 0px! important;

  }

  

  on a page like:

  iPad in business and education

  The words do not turn blue or can be, click on when the cursor is directly on the word.  To have the desired effect, the more the cursor above the word.

  The cursor acts as expected without the above rule. Unfortunately, without the rule, form CAD pages ending too wide.  Notice how had it appears above the word New.  The other words are too standoffish.

  

  The rules I use are here:

  http://pastebin.com/zrHDrd1d

  I didn't notice this problem until about a month.  Yes, the problem occurred before the operation with badge.

  R

  It seems to me that emphasis is placed on space - invoke FF "inspect element" - this is the area

  

• Re: Sore eyes using Portege Z930 screen

  Hi all

  After appr. 30 min of work with my Portege Z930 I get the pain in my eyes and, later, headache.
  I can't just work properly with him.

  I tried all known by me options to configure the graphic display, Intel utilities and a Windows, change text size and so on, but to no avail.
  Text is a little fuzzy looking.

  I'm 12 years old laptop user, changed a lot of it and it's my first laptop with such a poor quality screen.
  Or is it a default and I should ask replace the matrix?

  Appreciate all the advice of many,
  Sergey

  Hello

  The device supports a common 13.3 "(HD) TFT color LCD."
  The max resolution is 1366 x 768.

  So I can't find big differences between this screen and others, used in other books

  Of course 13.3 is not really a big screen I prefer notebook with a screen size of 15-17.
  The 13.3 is too small for me

  I don't know... maybe there is something wrong with the LCD display... then maybe you should ask a service provider to verify the part... but this is just my personal opinion...

• J4580: J4580 will not detect the alignment page.

  My J4580 that works very well for years, now will not detect the alignment page after you print and put on the scanner bed.  I try three times and it then goes to the default alignment parameters.  It still prints but text tends to little fuzzy.  What can I do to fix this?

  Hi @BruceK43,

  Thanks for joining the Forums of HP Support for a solution to your problem of alignment.

  I understand that you used a HP Officejet J4580 all-in-One printer with a Windows 10 computer but when you try to only scan the alignment page, the printer is not detected by the alignment page returns to the default alignment parameters. I would like to help with that.

  Here is the document of support designed to be used with this problem - a "alignment failed" Error Message appears on the printer control panel.

  Please let me know if that solves the problem, or if you need assistance.

• hard to read the fuzzy text files

  With the new CD player, I find that the files are very difficult to read.  The text is small and fuzzy.  What should do?  Large and heavy fonts as in some titles to show bright along the pixels.  A way to solve this problem?

  Repair failed

  I have the latest version.

  Dan

• Text on the screen is not clear

  I have a new Dell Vista pc runiing. I have a LCD Ultrsharp DEll monitor. ATI @MB graphics card, the resolution is set to 1280 x 1024, everything seems OK, but any text on the screen is not clear. HE's a little fuzzy. How can I fix it?

  Hi Amber321,
   
  How long have you been faced with his problem?
   
  You make changes to the computer until this problem occurred?

  I recommend you set the screen resolution and other settings. To do this follow the link below:
   
  http://windowshelp.Microsoft.com/Windows/en-us/help/617624ee-08f3-4AFF-9713-5e84a9674a261033.mspx
    
  You can also check out the links below:
   
  Ways to improve display quality
   
  http://windowshelp.Microsoft.com/Windows/en-us/help/132c1dab-6da1-47cf-96af-8f00eceaf6f51033.mspx
   
  If the links above do not work, you can check out the link below which will be useful:
   
  Troubleshoot monitor and video card
   
  http://windowshelp.Microsoft.com/Windows/en-us/help/2582c444-448C-4fb5-ba0c-d753f88d64791033.mspx
   
  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• Text slightly blurry

  Hi guys.

  Cp9 using, is it possible to make the text in absolutely crisp text captions? It seems a little fuzzy at the moment. There may be a setting or something I'm not aware of?

  Thanks in advance

  If you publish to SWF or HTML5 format (unfounded) then these legends get turned into PNG files when you publish on.  This text is called static text, because it cannot be changed during execution.

  If the text is provided by inserted variables, it is called dynamic text and sometimes that will look a little crisper when running.

  One of the "stuff" is NOT to allow your content to be resized by the user during execution.  Thus, you should NOT use the scalable HTML option.  You can also try the quality parameters of slide framework optimized or higher using 24-bit high quality instead of JPG.

  At the end of the day, generally should settle for less than perfect.

• When I opened my websit in firefox, the text jumps on my site a millimeter upwards or sideways. Within the internet Exlorer I don't have this problem. You can you

  I built my site with Joomla.
  It seems nice butinto firefox browser the text jumps a little

  Frans

  Thank you all for the very quick responses.

  The problem is solved in my opinion, by cutting the module.
  I will remember all the recommendations and maybe I can do something with it in the future.
  Because I know what the problem was, I took the site offline because the problem for you is no longer visible.
  For the disabled module, I'll have to find another option.
  Ticket can be closed.

  Thank you

  Frans

• on fuzzy when s2340m, requires power cycle to fix

  I have 2 monitors side by side identical s2340m, and only the fact.  It reminds me of the old CRTs when demagnetized.  "Wobbles" that is the case, and when he finally disappears (autoadjust will stay longer as well), but the entire screen (images and text) are a bit fuzzy/blurry.  I tried swapping cables dvi and the power of the other monitor, but the problem follows the screen.

  * 24 "and smaller monitors do not have a Dell's Service tag number. Because you have not bought the monitor directly from Dell, you must follow these steps below-
  * Save the invoice of the shop. Based on the date of purchase on this Bill, we you guarantee the monitor for 3 years. If you need a replacement of the screen, you will need to contact Dell order Support (not Support Technology Guide) for your country. You will provide to them by e-mail, an image or a PDF of the original invoice showing the date of purchase and your information. If you lose the original invoice, we will not be guaranteed the monitor. So you would provide the following data for the order of Dell Support representative if you need a replacement of the monitor:
  Brick or = online store
  Purchase date =
  Monitor model =.
  Reference Dell monitor PPID Serial number:
  [Your]
  Email =
  Name =
  Shipping address =
  Phone =
  Question =

• Problems of text of blackBerry Smartphones

  I just got my first Blackberry Pearl yesterday. Everything is great... except the SMS text messaging. When I go to compose a text SMS, the little box you type in disappears as soon as you start typing and not reappear until the cursor moves on the second line. When you get 2 lines of text, what you wrote is displayed. BUT if you misspell something in line 1 and go to to solve this problem, if you delete anything, the text disappears again. Once I sent the message, I can see what I wrote, but it will not appear me while I type it. You can see the character count on the side of the screen moving, showing you type something, but nothing appears. Help, please! It's very frustrating!

  The next thing I would do is then to make a backup of the data using the desktop backup manager and restore the functionality. Then I would like to wipe the device and reload the software.

  If you want to try to wipe the device you would go to Options | Security options | Settings General, hit the menu button, choose wipe Handheld. Do erase all data, but also reset the device back to the factory. After wiping did try to go in the new sms message and see if it happens. Otherwise, you can use backup and restore to restore your data and try it once more

  If you try to reload the operating system, and then follow the last post in this thread

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=8300&message.ID=31292

• Box pop up annoying when working with text

  I don't know what this new box, is that appears when I manipulate text... little white box with the capital letters and tiny in there...

  But I would like to know how to turn it off immediately.

  Poorly executed, it keeps popping up and gets stuck on when just trying to adjust the kerning and basic and other lines. Hideous.

  This looks like a new feature called Alternative glyphs. It makes it so much easier to find alternate characters for the selected character and you do not have to rummage in the glyphs Panel.

  

  That said, you can disable via preferences > Type > activate alternate glyph layer.

  

• Create a country founded as text

  Hi all

  I would like to create the letter "S" with Illustrator, but with the 'countries' like effect. Like the letter "S" with a few small points around, resembling Islands and the S should be a little "fuzzy".

  However I have not found a swatch or a tutorial on this subject.

  Someone has an idea? I already did the globe have my S inside.

  Thanks for your help

  Arkinex

  You mean it looks like a mass of Earth on a map?

  Something like that?

  

• Blocks of text overlapping fill Uni transparent look in the press

  Hi all

  Looks like I need help again once.

  I have three blocks of text overlapping (to some extent) (all 100% opacity, red background fill, fill black middle and above no fill). They look good on the monitor to identity card, but they show a transparent way when printing. I can clearly see the Red bottom showing through the average black person (in the region of overlap) and the top white text looks a little red tinted (in the same region overlapping). What I am doing wrong?

  Thank you for your help.

  The preference of the appearance of Black allows you to set whether the default [Black] swatch overprinted automatically.

  Offset inks are normally transparent and the precision with which a black overprint ink display is managed by assigned with the document CMYK profile. The degree of transparency depends on the situation of the press, so overlay would be most obvious on a no bed sheet and this is reflected in the allocation of profile during separation overprint preview is on.

  This is Euroscale Coated followed SWOP bed

  

  

  Older profiles did not show the effect of black overprint, so if you have turned off the color management you wouldn't see overprinting of black.