Text messages with Siri on Apple Watch does not

When I try to send a text using Siri on my Apple Watch it does not send. the only option I have is to not send. I read where the message is sent automatically when my arm is lowered, but it does not work. None of my posts are going through. How can I fix this.

Hello

To send messages through Siri:

-Ask Siri to send a message (for example "Hey Siri, send a message to say ");

-When finished, wait for Siri show what you have dictated on the screen for you to review;

-Then either lower your wrist again to send or to tell Siri to send (for example "Hey Siri, send").

-There is no need to touch the screen, unless you want to type on not sending to cancel the operation.

Tags: Apple Watch

Similar Questions

  • Text of the replies on Apple Watch does not match

    Hello

    I know how to set the default text above (App iPhone-Watch-ma watch-Message-answers by default), I updated the list already and only kept 3 responses I used most.

    But when I tried to answer a message by clicking 'Reply' on my Apple Watch (see IMG-01), it came with many suggestions that I had no idea whence they came (see IMG_02). These aren't the default text answers I put forward, my questions:

    1. Are there ways that I can remove or at least edit these "solved" answers here?
    2. Why do they have to be different from the set of default responses on Watch app on iPhone?
    3. Is this a problem of "sync"?

    Thank you!

    Kevin

    Could be a timing problem...

    INDU then re pairing your Apple Watch.

    Cancel the twinning of your iPhone - Apple and Apple Watch Support

  • Siri on Apple Watch does not

    Siri S does not work on my Apple Watch, voice or by prolonged pushing the scroll on the watch button. When I look under settings on my iPhone 5s, I can't Siri under general settings. Using my iPhone so is 9.2. How can I solve this problem?

    Hi Paul

    On your iPhone, go to: settings > General > Restrictions > activate Siri & dictation.

    Having done this, go to: settings > General > Siri - ensure that Siri is enabled.

  • Unlock with Apple Watch does not

    Hello

    I'm running a MacBook Air mid-2013 with macOS Sierra, with a 2nd Gen Apple Watch watchOS3 running. I'm on the same Apple for my Air ID, see and iPhone (6 s).

    But unlock with Apple Watch does not work on my Air. I activated 2 factor authentication. I checked the box that allows to unlock with Apple Watch. Everything seems to be kosher.

    When I close and reopen my Air, "Unlock with Apple Watch" appears for about 10 seconds, and then I type my password.

    Help? Thank you!

    I also have this problem. I have 2 accounts on my Macbook. One is the first account that I don't use, second my regular account. On my Second account, it of the same problem, but with the Admin account... It works.

    I Don t know why.

    Do you use also two accounts?

  • my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

    my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

    HI - try the following steps:

    On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):

    -Double-click the Home button, and then drag upward on each of the app previews to close.

    It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

    -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

    -To switch on: press and hold the side button until you see the Apple logo.

    If this does not resolve the problem, try next disconnect and rematching of your watch:

    -L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.

    -Choose to restore the watch (backup restore) when provided the opportunity during the whole.

    -Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

    - Pairing your Apple Watch and Support Apple - iPhone

    - Set up your Apple Watch - Apple Support

  • Apple Watch does not appear in the security/privacy settings my mac (2015)

    Apple Watch does not appear in the security/privacy settings unlock my mac (2015) for auto

    Hi abcd_bruce,

    Thanks for stopping by Apple Support communities. I understand that you are eager to implement the feature Auto Unlock on your MacBook Pro. It is a new system and I'll be happy to help you with this.

    Looks like you did a few steps already to help lift this step. In this article, automatically unlock your Mac with your Apple Watch, he goes over all the steps that must be done to implement this place. If you already followed all these steps and are still problems, then the next step would be to start the Mac in safemode, and then check if you are able to see the Apple Watch see the implementation of the security and privacy preferences.

    Try safe mode if your Mac does not end commissioning

    Have a good night!

  • Why is-Messages for my non apple contacts does not on my Mac, they work very well on my iPhone.

    Why is-Messages for my non apple contacts does not on my Mac, they work very well on my iPhone.

    Transfer continuity troubleshooting procedure

    Continuity of transfer troubleshooting (2)

    iPhone, iPad, iPod touch and Mac using continuity - connect

    SMS relay - set and use - Yosemite / iOS 8

    SMS relay - set and use - Yosemite / iOS 8 (2)

    Sending text messages

  • My Apple Watch does not turn off.  When I go to turn off the slider isn't in the article to stop, I can restart but the cursor still does not appear

    My Apple Watch does not turn off.  When I go to turn off the slider isn't in the article to stop, I can restart but the cursor still does not appear

    Hello

    It is not possible to disable Apple Watch when its on the charger and connected to the power supply - this is normal.

  • What is pushing apple? I must have when sharing itunes with MP3 Rocket? Everything works fine. But I get a message telling me that apple Push does not work.

    Hello. I share itunes with MP3 rocket very successfully. I buy songs from itunes.  When I finished, I get a pop up window telling me that Apple Push does not work properly. What is Apple push and do I need it. Everything is working well at the moment.  Thank you

    Hi Wendy,.

    Thank you for choosing to ask your question in the Microsoft forums. The question you posted would be better suited in the Apple forums. Check out the link and ask the question.

    https://discussions.Apple.com/index.jspa

  • Apple pays on Apple Watch does not

    Hello world!

    I'm a big fan of Apple pay, I use it anywhere that accepts it.

    A feature, I can't wait to try it immediately when I got my Apple Watch (24 hours ago only) was paying Apple.

    In the first hour of me set up my watch, I went to McDonald's to get a Coke (it's the closet place who agrees to pay Apple), so I could test Apple pay.

    When I put my watch next to the drive, nothing happened. The screen remained black all the time. To complete the transaction, I pulled out my phone and also, which didn't work. I used pay Apple on my iPhone, several times the same McDonald's before and it's always worked flawlessly.

    A few hours later, I had went to Best Buy to buy wireless headphones and once more tried to use Apple pay on my watch for the purchase. But unfortunately, nothing happened here either. The watch remained black all the time.

    While I was trying to make it work, I noticed my iPhone wake up (he was placed flat on the counter) and displays the message - "Hold iPhone close reader" (I forgot the "exact" wording). When I gave up on the Apple Watch, I took my phone to purchase and it worked perfectly.

    Now, whenever I have install my credit card on the iPhone, I have to check (via a SMS of BofA code). When I looked at the settings in the Apple Watch app on my iPhone - I saw my already credit card. I clicked on the button 'Add' next to her, that I then invited to add security code 3 digit number to check. Once I did, my credit card was placed under the header indicating that it is an active card on the watch. And a few seconds, I had received a notification on the watch let me know it was ready for use.

    I guess it is setup correctly, which miss me so much? Are there any ideas as to why my Apple Watch does nothing?

    Sorry to ramble on and on. I wanted to give you all the details in the hope that maybe someone can point me in the right direction to solve this issue.

    Thank you in advance for your help!

    -Jason

    Hi Jason

    In order to pay using Apple pay on your watch, you must first quickly double - press the side button.

    It will then display your default map. If you have added other cards and you want to use one of them instead, swipe to switch between maps. With your favorite card displayed, hold your watch up to the Terminal:

    -The dial of the watch must be faced with and parallel to the screen of the own terminal (you shouldn't be able to see the face of the watch and pay), aligned in the Center with the logo without contact on the terminal screen and held less than 10cm.

    -It must be blocked in this position for up to a few seconds, until you hear the confirmation beep and the pulse haptic.

    More information: defining and using the Apple pay with your Apple Watch - Apple Support

  • Auto unlock with Apple Watch does not

    Hello

    I followed all the instructions and advice of all Web sites without success, my watch is on my wrist, unlocked and the Mac cannot communicate with the watch, or when he's on the odd occasion that the watch is not open the Mac, I still have my password.  I have not matched and repaired the watch, and the new registered in iCloud, transfer off and on again, the watch, the 6s iPhone and watch are all connected to the same network still with no luck.  This should be an ongoing and easy process as most of the functions of apple, but it just doesn't work and it is the function that I was more enthusiastic in this upgrade of the software, feels a bit like false advertising if it's this hard to operate.  Can apple be solve this problem or can help a tech guru

    If the problem is that when you check the box "Allow your Apple Watch unlock your Mac" in security pref pane it breaks down and said that one cannot communicate with your watch?

    You have Bluetooth and Wi - Fi enabled?  If so, try to restart your Mac, iPhone and look, and check the box again.  Also sometimes if you just wait a few hours and try to check the new it will finally work.

  • Auto unlock with Apple Watch does not appear in my window security and confidentiality

    "Disable the automatic connection' or Auto unlock with Apple Watch" appears in my window security and confidentiality

    Hello

    Automatic unlocking with Apple Watch is available for the Mac models since the mid-2013 and later running macOS Sierra.

    Check that:

    • Your Mac has Bluetooth and Wi - Fi enabled.
    • Your Apple ID use two factor authentication (as opposed to the two-step verification):
    • Your Mac and Apple Watch are connected to iCloud with the same Apple ID:
      • On your Mac, choose Apple () menu > System Preferences, and then click iCloud.
      • On your iPhone, open the Apple Watch app, then go to general > Apple ID.
    • Your Apple Watch uses a password:
      • On your iPhone, open the Apple Watch app, then type the access code.
    • Transfer procedure is enabled on your iPhone and your Mac:
      • On your iPhone, go to: settings > general > transfer procedure.
      • On your Mac, go to: System preferences > General - down, tick the option "Allow transfer between the Mac and your iCloud devices."
      • If these parameters are already enabled, a user has found that it helped to deactivate and reactivate the procedure of transfer on their iPhone.

    More information:

    Automatically unlock your Mac with your Apple Watch - Apple Support

  • Why my Apple Watch does not display my photos when I double tap to show my card to pay with?

    I Double click on the button on my Apple Watch, to pay for an item at the checkout and it maintains show my photo favorites... not the card to make the payment

    with.  I am confronted then with passing by pressing this button several times so that it can display the map so that I can complete the payment.  Why is this?

    Restart your Apple Watch, and then press the button twice to activate Apple pay.

    Restart your Apple Watch

    With the help of Apple pay in shops

  • My Apple Watch does not load

    I have my watch since may 2015, so I guess we could say that it is one of the prototype of apple watches.  I now use one then, but be hones I dopnt use it that much since I have other watches so.  last 2 weeks (Dic 2015) I load 100% and use it without problem, but I tried, after consuming the accusation, to load and it has not been possible.  A ¨Charging message with thi accessory is not supported by Apple Watch¨.  I tried severla times, changing the brick, but I had the same problem no matter what I did.  But 5 days ago it loaded again, and after that I still have the same problems of loading.   After reading the other posts, I have disabled the clock, reset and/or restart the watch as well for 2 or 3 times, and still the same message appears.

    Someone has a kind of the same problem? Is the battery damaged because he remained for several weeks or months without a job?

    Hello

    The battery is covered by the limited warranty of one year of the Apple Watch.

    Given the steps you've already tried, I suggest you contact Apple Support (mail service may be available) or make a Genius Bar reservation in order to your watch and accessories checked power warranty:

    https://www.Apple.com/support/watch/contact/

  • My Apple Watch does not OS 2.1 update. Keep saying at the end that cannot verify the update as long as it is not connected to the internet. The iStore even tried and they couldn't help.

    Nice day

    I need help with my Apple Watch. I tried the update to OS 2.1. I can't update as the right at the end of the download it says cannot verify the update as long as it is not connected to the internet. I made sure wifi was strong, batteries were in charge, I have even matched and re-paired the watch. I took it to the iStore so they couldn't get it updated and everything they said was sorry, you will have to wait the next update be released. Everyone dealing with this issue? What should do?

    Concerning

    Hello

    Because the update for you Apple Watch comes from your iphone is your iphone

    Running ios 9.2?

    If, then go to settings on iPhone reset network settings after reset entered your key wireless router.

    Also before doing this turn off your router for 30 seconds.

    Then repeat the update of watch.

    See you soon

    Brian

Maybe you are looking for

  • How to remove this annoying announcement

    Hello, and sorry for the glitch, but it really gets me upset. I've included this screenshot for help in detail what I'm talking about.http://prntscr.com/2o1urhHow can I remove this ad? I tried to go to tools > settings > alerts and notifications not

  • How to determine the Thread of execution for PostUIMessage,

    Greetings: I'm trying to develop an application TestStand with two Interfaces (in addition to the sequence editor) user, and I need to be able to view messages from interface user back and forth between two user interfaces. So far I managed to create

  • For the Latist Windows to update an error has occurred.

    The download is complete but not able to install. It was owned the PC Cams, pilots, etc Windows Update error Code was given. Error Windows Update 8024401 b is listed in the troubleshooting update page. Now what?

  • obsolete printer for mac 10.7 driver

    I'll try to find a print driver MAC for a HP Deskjet F380 running os 10.7. is one that is available or don't I have to buy a new printer?

  • InstallShield in Visual Studio 2015RC

    InstallShield Limited Edition is available in Visual Studio 2015RC? I installed InstallShield Limited Edition 2013 and it wasn't available in Visual Studio 2015RC.