text of marker on the digital gauge
Hello
How to display the text or value on a marker that I place on a digital gauge (see photo)
Thank you
Dan
OK, rookie mistake.
Necessary to change the display settings of the scale (see photo)
Thanks for the help!
Dan
Tags: NI Software
Similar Questions
-
How can I make a text transparent marking with the courier in InDesign CC?
How can I mark text with the courier and see things that are behind it (next layer...)
Of course, it works in Version CS5.5.
I havn't found a preference for this problem.
THX 4 help
drx_ander wrote:
I'm going to think it was a missunderstanding. So I did the screenshots of the problem.
No misunderstanding. Text highlighing was transferred to the operating system. There are no settings in the ID that will change the new behavior.
-
Text field: format of the digital None change category
Hi all
I have a loop to set all the fields read-only.
fFc var = this.numFields;
var FieldName = "
for (var s = 0; s < fFc; s + +) {}
FieldName = this.getNthFieldName (s)
Var AFN = this.getField (FieldName);
If (!.) (FieldName is "FNIS_Print")) {/ / Do not set the button "print" read only}
fFn.readonly = true;
}
}Our provider PDF sets category format of some numeric field (2 decimal separator). The merged data in the field has already been formatted, so I would change the fields format category of digital to none with the help of the loop above.
Can it do? If so, can you give us some examples?
Thank you
Doug
Sorry to resurrect an old thread, but I've searched high and low to answer this very question. Finally, on my own tests, I discovered an interesting solution that solves the problem mentioned here.
Property cannot be set simply the 'Format' to an empty string, you must also set the property to "Strike" to an empty string. This will actually change the format of the field 'None' behaviour both within the Format of the field that is tab
var f = this.getField ('text_field')
f.setAction('Format','')
f.setAction('Keystroke','') -
Text of the mark in the navigation bar is not displayed correctly
Hello, I created my navigation bar, and I encountered a strange problem. The text of mark in the navigation bar, which retains the link to my home page does not always display correctly. When I visit my test page in Google Chrome (signed in my personal account) the brand text only display the basic text style. It displays like this
But when I load the test in Google Chrome page, well signed to my business account - it displays like this
The second image is the way it should appear, this is the way I style navigation bar in my CSS (see below), but I'm puzzled as to why it loads differently in the same browser but connected to different accounts.
CSS I used to create the navigation bar in the image above
@charset "UTF-8"; .container-fluid { background-color: #CA0E0E; width: auto; } .navbar.navbar-default { background-color: #A7AB22; top: 9px; border-style: none; } #navbrand { background-color: #CA0E0E; color: #FFFFFF; font-family: eater; font-style: normal; font-weight: 400; font-variant: normal; word-spacing: normal; font-size: 19px; } .nav.navbar-nav.navbar-right li a { color: #FFFFFF; } .navbar.navbar-default a:hover { background-color: #A7AB22;; } .dropdown-menu { background-color: #CA0E0E; padding-top: 0px; padding-right: 0px; padding-bottom: 0px; padding-left: 0px; border: 0 none; top: 60px; border-radius: 0px; } .dropdown { background-color: #A7AB22; }
Does anyone have any ideas as to what could happen?
Post edited by: Jason Telford to correct formatting
You don't have not learned us your complete code, so a bit of guess work.
1 have you included the "Eater" fonts to your website as in
2. in the style rules that you have shown us, the police is spelled with a small "e" is - this should be a capital 'E' as in
do-family: "Eater."
To stop this guessing game, it is best if you specify the URL of your web site.
-
programmatically change the background of digital gauge
Hello
I'm looking for the controlAttribute of SetCtrlAttribute to set the background of digital gauge
There is no evidence in the documentation of digital control.Greetings
Jürgen
Hello Juergen,
Is ATTR_FILL_COLOR the attribute you are looking for?
-
How can I add drop shadow to the digitized text handwritten?
I wrote by hand and scanned a text, open in Photoshop CS6 and reversed tones to create white letters on a black background. I made this file in Avid Media Composer and it superimposed on an image using a luma key to key on black. Now, I want to add a small drop shadow to the text to make it more readable when it is bunk. How can I do this in Photoshop before importing the file in Media Composer? I realize I have to use an alpha channel, rather than a luma key, in this case, but I have no idea how to do to create the PS file with shadows on the letters. I think I can learn the procedure to make a layer alpha from online sources. I would be grateful for any guidance.
Without having seen the digitized text I am not sure that the following technique is appropriate. That said, consider this approach, assuming that the scanned manuscript text is on white paper:
1. open the file. The text is the background layer
2 stir its background lock in the trash
3 hold down the command key and click the new layer at the bottom of the layers panel. He will place a white layer under the text layer.
4. the background layer is layer 0. Select layer 0.
5 double-click the layer color 0 in the layers panel to get the layer Style menu area
6 down below is the "Mix" box if are two gray scales. Move the slider to the right of the grey scale top of the page toward the left and the White Book of your scanned text layer will become transparent. Click OK.
7 Cmd + E to combine the layer
8. at this point, you can place a layer below your text layer. Edition > fill with white.
9, return the text layer and - once more the use of the layer-Layer Style - apply the drop shadow. (Clicking the shadow option will provide additional controls.)
-
Convert a text marked in the notes in...
With this script, convert us referenced text at the bottom of page, but we lose the character styles.
http://www.Indiscripts.com/post/2010/04/refoot-convert-markup-text-into-InDesign-footnotes
We can keep them?
Thank you
The problem is this script by Marc manipulates the text through 'content', which is a simple JavaScript string unformatted. You can change that using the native function of text InDesign 'move' - replace the internal reference with this function:
while( fnFind=fnFinds.pop() ) { fnParent = fnFind.parent.getElements()[0]; ip = fnFind.insertionPoints[0].index; try { fn = fnParent.footnotes.add(LocationOptions.BEFORE, fnParent.insertionPoints[ip]); fnFind.move (LocationOptions.AT_END, fn.texts[0]); ++count; } catch(_){} }
... but it (obviously!) copy the tags as well. Get rid of them is not that simple in a script *-maybe it's just more easy to do a search/replace separate thereafter, to eliminate.
* It is when the reference markers are set texts, but not with the current construction, which allows various different markers.
-
ICloud Keychain how can I change the phone number needed to verify the code text for me? The number it was sent is an old phone number of my friends that I do not have access to the.
Try this from another thread I saw.
On iOS, go to settings > iCloud > keychain and tap button to disable iCloud keychain. (you will be asked to delete or keep the passwords on device) I chose to delete...
Then turn it back on, and pop - up chose reset iCloud trousseau, on a chosen pop-up confirmation reset
In the new window pop up use iPhone password like iCloud cryptogram? has chosen the use code
Enter your secret code (4 digits) then choose country and your new phone number
Although, to "Restore the iCloud Keychain," I took to erase the data and essentially set up a new keychain. Not the case. Strangely, after essentially bypassing the security system, setting a new password and verification number, I see my cards, passwords and other data have been restored. Maybe it's all the iCloud account and this master password. Or maybe it's a bug. With Apple, we'll never know.
Also have a look here: get help using iCloud Keychain - Apple Support
-
How to use the digital TV tuner on Qosmio G30?
Hello, I recently got a qosmio G30-175. Could someone tell me how I can use the digital TV tuner mode qosmio player? Thank you
Hello
You won't like this, but unfortunately the digital tuner is not a musician Qosmio option.
QosmioPlayer software is actually quite limited you really need to start Windows Media Center to get all the features of your machine which is a shame. There is always a chance toshiba can update the software of PS in time to take into account items such as the digital tuner.
Despite this, you still have one of the best phones on the market, so I would like to concentrate on that.
:-)Kind regards
Mark
Post edited by: Mark Nettleton
-
Acquire the values only when the digital output is high.
Hello
I work with test of transistor, whose door is controlled by the digital release of USB6289, related to BNC2120.
Test plan:
Door 1.transistor is enabled for 5seconds, with P0.0 for example
2. then, everything remains off for 1secondes.
3.p0.1 is used as digital output to activate the circuit passing him curent through in the opposite direction, P0.1 goes high for 3 seconds, PS: Gate is off.
4. the same cycle repeats again.
My question is to store values to the output of the transistor when P0.0 and P0.1 goes high, and these values should not change until my digital outputs respective again go high.
I can access transistor by continiously read out my power supply values.
and in the State off I want to read AI0 because at that time, my power supply is off, so that I can activate the circuit to pass the current in the opposite direction.
Again, my question is to gain the output through power value when P0.0 is high and store them until the transistor turns on.
and even for P0.1, acquire the value of output through AI0, when P0.1 is high and store it until it goes high again.
Hopefully, I'm able to explain my problem clearly.
Please help me.
Concerning
Anurag
Think about what States (object:statemachine and determine when to use sequence Structures) do you want from t0... t(n-1), IF DAQmx generates outputs and/or inputs are absorbed and what needs to happen (event timed out), before move you on to the next 'State '.
type def 'enum' with your different States:
- initialize
- wait (the user initializes times (sec) set for States, or whatever and presses button 'Start')
- T0 (generate DigOutputs, store acquired data AnalogOutput (string output number) the register shift, before moving to the next State > user 'set time' must elapse (Note: the wait function allows you to control the rate of execution of loop and allow the CPU to respond to external events and system tasks and avoid using wait functions at the same time an operation of software...))
- ...
- t(n-1) if ' end (made requirement) "> goto 'stop', ' another (not requirement not)" > goto regardless of 'State '.
- stop
- write a text file of data (string).
-
problem of pirate?
We received a message from windows live saying the acct has been hi-jacked by a hacker and they wanted our mobile phone # send a text msg to solve the problem. We have not so much text msging and then they want all sorts of personal information (name, DOB, address, e-mail addresses, etc.) and we do not want to do that. is this a legitimate windows msg and is it possible that I can call someone from microsoft was finishing speaking? Thank you.
Hello
That sounds like a SCAM don't respond so not! Unless you have launched the contact of its likely someone
I'm trying in fact to steal your account and your identity. If your account has been compromised, see the
below.Unfortunately the answers is a site of support of peers supported and has no real influence
with Windows Live.Check with Windows Live Support and Forums
Windows Live Mail Forums
http://www.windowslivehelp.com/forums.aspx?ProductID=15Windows Live Solutions
http://www.windowslivehelp.com/solutions.aspx?ProductID=15Windows Live Solution Center
http://www.windowslivehelp.com/Compromised account - unauthorized account access
http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I have a hauppauge tuner card 1850. I live in the Canada. If I've set up media center with the Canada as my position the digital tuner is not recognized as compatible in my area. If I place the library with my position defined in the United States. The digital tuner is recognized and works very well. The downside is that I can not guide ads for my actual surface when I set the location in media center in the United States.
could help you.BarbMVP - Windows/entertainment and connected homePlease mark as answer if that answers your question -
the value of the digital inputs to change the field
Hi all
I have an edit field that has a digital text filter that only accepts phone numbers. Users have the choice to load these numbers from address book or direct entry.
I used the digital filter to allow only numbers. .
But when I tried to load these address book. with editField.setText (phoneNum); It is to throw IllegalArgumentException.
How to set digital inputs to the editField?
Hi thanks for all your entries!
My issued are resolved. I used BasicEditField aulieude EditField to solve this problem. the basicedit field allows the digital text and it solved the problem.
Thanks for all your interest...
-
Subject pretty much said it all. I got a new CPU, shut down the computer, installed, and now Win7 does not start. It hangs on a black screen gripe on a signature file. Here is the full text:
"A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source."
If you have a Windows installation disc, insert the disc and restart your computer. Click 'Repair your computer' and choose a recovery tool.
Otherwise, to start Windows, so you can investigate further, press the ENTER key to display the boot menu, press F8 for Advanced Boot Options, select last known good configuration. If you understand why the digital signature file cannot be verified and want to start Windows without this file, temporarily disable driver signature enforcement.
File: \Windows\system32\winload.exe
Status: 0xc0000428
Info: Windows cannot verify the digital signature for this file. »
Well, the first thing I did was put in the installation CD and reboot to try the thing "repair your computer". Charge, said he found a problem, said he has fixed the problem and restarted. But it always hangs on the same screen of the error.
So I tried to hit Enter and then F8 as it said to do, but brings me right to the error screen. I'm stuck, there is nothing that I can do, and I need this computer to work tomorrow.
Another interesting note is that the recovery on the installation CD tool identifies my system installed Windows Vista... wtf.
Help?
I don't know if this post will solve your problem, but it can give you new ideas or angles to try.
-
Message text to display in the carousel when no image extracted from the database
I'm creating a carousel using pictures from a database table. All the fields in the table contains no images. Currently, it displays a cross mark on the image.
For areas that I want to display text can be 'No Image'. To do this, I put the property 'EmptyText' of the Carousel component. But the text does not appear. Also, I do not wish the crossroads brand to display instead, I want only the text "No Image" look upwards.
JDeveloper version - 11.1.1.7.0
Fig-cross brand displayed for image empty
Fig-EmptyText property set for the carousel component
If I understand correctly, emptyText shows as if the entire dataset is empty, not a picture (if any rows in the resultset). It's same with af:table. Maybe I'm wrong, however.
You can use an 'empty' image: for example to put an image of 'empty' (tailored to your needs, is perhaps 'no image' text or an icon etc.) in your project resources folder. Then, in your application, replace "null" for path to this image and it will be dispalyed instead of the generic "missing image" icon in the browser (Yes the red X is icon generic browser for missing images).
Maybe you are looking for
-
How to change the URL of google?
HelloCurrently I use Mozilla Firefox & Google Chrome for my navigation. But recently (4 days ago) it's URL has changed. Whenever I want to search anything through these two browser the URL appeared in 'Hong Kong' site. In search bar "https://www.goog
-
How to solve problems with the download of updates?
When I try to manually update the phone, I mentioned that there was an error when searching for updates.In addition, the update of the market without download, because thus there was an error.
-
Black screen on the Satellite A350-122 using Linux Ubuntu
Hi all I have a couple of months it has installed Ubuntu 9.04 (which completely replaces Windows XP) on my Toshiba A350-122 and this worked perfectly, until a recent day. One day, after having locked the computer, when I came back the screen was very
-
Does anyone know how to scan multiple pages into a single jpegfile? When you scan a document of several pages in a file on a network each page gets its own jpeg image scanend file. HP standalone scanner allow generally allows you to add the multuple
-
I get excessive offensive junk mail in my Inbox.
original title: spam Offensive Excessive I get very unwanted junk mail. We just F - book. I have a filter in place and I also add the @ address to my list of unwanted senders. However, there are so many different combinations of @ that I can spend