Text of the replies on Apple Watch does not match

Similar Questions

• Text messages with Siri on Apple Watch does not

  When I try to send a text using Siri on my Apple Watch it does not send. the only option I have is to not send. I read where the message is sent automatically when my arm is lowered, but it does not work. None of my posts are going through. How can I fix this.

  Hello

  To send messages through Siri:

  -Ask Siri to send a message (for example "Hey Siri, send a message to say ");

  -When finished, wait for Siri show what you have dictated on the screen for you to review;

  -Then either lower your wrist again to send or to tell Siri to send (for example "Hey Siri, send").

  -There is no need to touch the screen, unless you want to type on not sending to cancel the operation.

• Activity of the app on Apple Watch does not work correctly. Difficulty?

  II have tried some Nations United-matching the iPhone several times but also to feed off both several times. I just watch defective s or any other trouble with their app activity working properly? I'm a Hairdresser and standing all day and my app always says 0 hrs.

  What activity you choose?

• Apple Watch does not appear in the security/privacy settings my mac (2015)

  Apple Watch does not appear in the security/privacy settings unlock my mac (2015) for auto

  Hi abcd_bruce,

  Thanks for stopping by Apple Support communities. I understand that you are eager to implement the feature Auto Unlock on your MacBook Pro. It is a new system and I'll be happy to help you with this.

  Looks like you did a few steps already to help lift this step. In this article, automatically unlock your Mac with your Apple Watch, he goes over all the steps that must be done to implement this place. If you already followed all these steps and are still problems, then the next step would be to start the Mac in safemode, and then check if you are able to see the Apple Watch see the implementation of the security and privacy preferences.

  Try safe mode if your Mac does not end commissioning

  Have a good night!

• my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  HI - try the following steps:

  On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):

  -Double-click the Home button, and then drag upward on each of the app previews to close.

  It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

  If this does not resolve the problem, try next disconnect and rematching of your watch:

  -L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.

  -Choose to restore the watch (backup restore) when provided the opportunity during the whole.

  -Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

  - Pairing your Apple Watch and Support Apple - iPhone

  - Set up your Apple Watch - Apple Support

• My Apple Watch does not turn off.  When I go to turn off the slider isn't in the article to stop, I can restart but the cursor still does not appear

  My Apple Watch does not turn off.  When I go to turn off the slider isn't in the article to stop, I can restart but the cursor still does not appear

  Hello

  It is not possible to disable Apple Watch when its on the charger and connected to the power supply - this is normal.

• Unlock with Apple Watch does not

  Hello

  I'm running a MacBook Air mid-2013 with macOS Sierra, with a 2nd Gen Apple Watch watchOS3 running. I'm on the same Apple for my Air ID, see and iPhone (6 s).

  But unlock with Apple Watch does not work on my Air. I activated 2 factor authentication. I checked the box that allows to unlock with Apple Watch. Everything seems to be kosher.

  When I close and reopen my Air, "Unlock with Apple Watch" appears for about 10 seconds, and then I type my password.

  Help? Thank you!

  I also have this problem. I have 2 accounts on my Macbook. One is the first account that I don't use, second my regular account. On my Second account, it of the same problem, but with the Admin account... It works.

  I Don t know why.

  Do you use also two accounts?

• Why do write can not be performed because the number of data channels does not match number of channels in the task.

  Possible reasons:

  Scripture cannot be performed because the number of data channels does not match number of channels in the task.

  When writing, provide data for all channels in the task. You can also change the task so that it contains the same number of channels as the written data.

  Number of job channels: 8
  Number of data channels: 1

  Lama says:

  The DAQmx vi writing gives me the error. If I run a single channel, isn't a problem. Multichannel gives me error.

  You are funny! Why tie yourself to work VI (single channel) instead of one that gives you errors (multichannel)?

  (If your car does not work, you bring car your wives to the mechanic, right!)

  What is the exact text in the multichannel 'physical channels' when you do the AO control?

  Lama says:

  I did a sequence to ensure that each function has been run in the correct order. Wouldn't a race condition.

  All you have to do is wire the 'start of task' error at the entrance of error of the DAQ assistant and then back to 'stop task' and things will run in order. Guaranteed! Think the stream! Everything else can run in parallel or the order is irrelevant.

  First convert the sequence stacked to a sequence of plate, remove the flat sequence and add the mentioned son. Now, do a "cleaning pattern.

  A when stacked with the inhabitants of the sequence is one of the worst construction you can possibly do. It makes the code difficult to follow, impossible to maintain, difficult to debug.

• Apple Watch does not stuck in mode bedside table

  MY watch is in bedside mode. I plugged in the charger, but there is no change in the watch.

  Hello

  Try a reboot of the Force...

  Force restart your Apple Watch

  You should force reboot your device as a last resort, and only if it does not. To force the restart your Apple Watch, press in and hold the side button and the digital Crown for at least 10 seconds, and then release both buttons when you see the Apple logo.

• Apple pays on Apple Watch does not

  Hello world!

  I'm a big fan of Apple pay, I use it anywhere that accepts it.

  A feature, I can't wait to try it immediately when I got my Apple Watch (24 hours ago only) was paying Apple.

  In the first hour of me set up my watch, I went to McDonald's to get a Coke (it's the closet place who agrees to pay Apple), so I could test Apple pay.

  When I put my watch next to the drive, nothing happened. The screen remained black all the time. To complete the transaction, I pulled out my phone and also, which didn't work. I used pay Apple on my iPhone, several times the same McDonald's before and it's always worked flawlessly.

  A few hours later, I had went to Best Buy to buy wireless headphones and once more tried to use Apple pay on my watch for the purchase. But unfortunately, nothing happened here either. The watch remained black all the time.

  While I was trying to make it work, I noticed my iPhone wake up (he was placed flat on the counter) and displays the message - "Hold iPhone close reader" (I forgot the "exact" wording). When I gave up on the Apple Watch, I took my phone to purchase and it worked perfectly.

  Now, whenever I have install my credit card on the iPhone, I have to check (via a SMS of BofA code). When I looked at the settings in the Apple Watch app on my iPhone - I saw my already credit card. I clicked on the button 'Add' next to her, that I then invited to add security code 3 digit number to check. Once I did, my credit card was placed under the header indicating that it is an active card on the watch. And a few seconds, I had received a notification on the watch let me know it was ready for use.

  I guess it is setup correctly, which miss me so much? Are there any ideas as to why my Apple Watch does nothing?

  Sorry to ramble on and on. I wanted to give you all the details in the hope that maybe someone can point me in the right direction to solve this issue.

  Thank you in advance for your help!

  -Jason

  Hi Jason

  In order to pay using Apple pay on your watch, you must first quickly double - press the side button.

  It will then display your default map. If you have added other cards and you want to use one of them instead, swipe to switch between maps. With your favorite card displayed, hold your watch up to the Terminal:

  -The dial of the watch must be faced with and parallel to the screen of the own terminal (you shouldn't be able to see the face of the watch and pay), aligned in the Center with the logo without contact on the terminal screen and held less than 10cm.

  -It must be blocked in this position for up to a few seconds, until you hear the confirmation beep and the pulse haptic.

  More information: defining and using the Apple pay with your Apple Watch - Apple Support

• My Apple Watch does not load

  I have my watch since may 2015, so I guess we could say that it is one of the prototype of apple watches.  I now use one then, but be hones I dopnt use it that much since I have other watches so.  last 2 weeks (Dic 2015) I load 100% and use it without problem, but I tried, after consuming the accusation, to load and it has not been possible.  A ¨Charging message with thi accessory is not supported by Apple Watch¨.  I tried severla times, changing the brick, but I had the same problem no matter what I did.  But 5 days ago it loaded again, and after that I still have the same problems of loading.   After reading the other posts, I have disabled the clock, reset and/or restart the watch as well for 2 or 3 times, and still the same message appears.

  Someone has a kind of the same problem? Is the battery damaged because he remained for several weeks or months without a job?

  Hello

  The battery is covered by the limited warranty of one year of the Apple Watch.

  Given the steps you've already tried, I suggest you contact Apple Support (mail service may be available) or make a Genius Bar reservation in order to your watch and accessories checked power warranty:

  https://www.Apple.com/support/watch/contact/

• total size of the files of Windows 7 does not match the size of partition

  In the D: partition

  total space: 265 GB free space: 59.1 GB

  There is only one visible folder: Daisy, size: 87.4 GB from the Explorer

  Other records hidden three: info Volume system, c:\Windows\Msdownld.tmp, $RECYCLE. BIN takes up almost no space

  Of course free space does not match the file size.

  Do not partition system, no problem to update windows and restoration, sleep or page file.

  Some strange things:

  1. with the help of file size 3.4 correctly see the size of the file

  Daisy file occupies 206GB

  Once I copied the whole file to the other partition Daisy

  and the result is the record more like 2xxGB

  so I guess that 206GB is the right size

  /////////////////////////////////

  may be ignored.

  2 folder being read-only Daisy

  Even uncheck or untick read only box in the properties of the folder does no effect

  After loading, it still shows read only

  3. 'read only' does not work

  2, daisy file is read only

  but I managed to delete files inside

  ////////////////////////////////

  ////////////////////////////////

  Is it a mistake to folder structure?

  It's a newly installed windows, so I guess that windows is clean

  Hope to see the solution and identify the problem

  Thank you very much

  OK, based on your new information, the error is that Daisy is 206 GB but Windows Explorer reports it as 87GB.

  No other information seems more relevant.

  Ideas-

  1 run ChkDsk on the drive - [first of all, make sure you have a backup of Daisy or make a new backup always] in Windows Explorer, right-click on the drive & select Properties, then the Tools tab, then click the check now button, turn off the option to make repairs in first to see if there are errors or not before making any decision as repairs can delete or corrupt files which are reported in the file allocation table.

  2. find another utility that measures the size of record to help you track down all the difference here.  TreeSize Free will be repeated.

  I do not understand your comment "later, I found the reason why I can't locate the"office"is the language of auto change." It's in Chinese at first but watch the 'bureau' cmd"that this had not been mentioned before.

  Denis

• TO_DATETIME gives the error ORA-01861: literal does not match the format string

  When I use the following in a formula in the column in the business model, the administration of BI tool does not complain:

  TO_DATETIME (LEFT ("registration - College". "D time". " ("' Exercise ', 4) | ("/ 09/01 ', ' yyyy/mm/dd')

  But when I use it in an analysis, I get the error message:

  ORA-01861: literal does not match the format to the call of the OIC string

  The scope of practice is a varchar of 6 characters (e.g. 201213), so I do not know what causes this error. Is this because the TO_DATETIME expects something like hh as argument?

  Without the element that to_datetime is supposed to work, here is an example that I made on SampleApp406.

  

  Try to add the "time", but for me it has always worked without problem.

• Apple Watch does not record the duration of the exercise in the fitness rings.  Is there a solution?

  LLA exercise fitness ring does not workout time.  Is there a solution?

  Hello

  Progress towards your daily goal of exercise of credit, the application of the activity is to identify the activity equal or exceed the intensity of a brisk walk.

  This applies both in general everyday wear and during the recording of training through the app to training sessions. It is possible that your training did not meet this requirement.

  The definition of a brisk walk varies from one person to another and depends on your personal information. To verify that your personal information is accurate - and update over time:

  -On your iPhone, in the application of Eve, go to: My Watch tab > health > edit - tap and adjust the settings, then press on in fact.

  In general everyday wear and when your iPhone is not taken along on some workouts outdoors, the application of the activity relies on your movement of arm (measured by accelerometer) to track the movement in order to progress towards the goal of the exercise of accounting. For best results, let the arm on which you wear your watch to swing naturally when you move and during training.

  Calibrate your watch can improve the precision of the estimates (including the appropriations for the year) made by the activity and workout app app. More information and instructions for calibration of your watch are available via the link below.

  More information:

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

  Use the activity on your Apple Watch - Apple Support

  Use of the workout on your Apple Watch - Apple Support

• My Apple Watch does not OS 2.1 update. Keep saying at the end that cannot verify the update as long as it is not connected to the internet. The iStore even tried and they couldn't help.

  Nice day

  I need help with my Apple Watch. I tried the update to OS 2.1. I can't update as the right at the end of the download it says cannot verify the update as long as it is not connected to the internet. I made sure wifi was strong, batteries were in charge, I have even matched and re-paired the watch. I took it to the iStore so they couldn't get it updated and everything they said was sorry, you will have to wait the next update be released. Everyone dealing with this issue? What should do?

  Concerning

  Hello

  Because the update for you Apple Watch comes from your iphone is your iphone

  Running ios 9.2?

  If, then go to settings on iPhone reset network settings after reset entered your key wireless router.

  Also before doing this turn off your router for 30 seconds.

  Then repeat the update of watch.

  See you soon

  Brian