Text on the screen is not clear

Similar Questions

• The restore button on the top right of the screen is not clear and I was wondering how to fix this please

  Restore down and reduce to a minimum the button are grayed out looking. However, the close button is ok. How can I get these showing clear please?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  If you use a windows theme non standard or other changes in appearance and then try to undo these changes and use a (different) standard theme or wallpaper of Windows.

  • Control Panel > personalization > Theme & window color and appearance

• I don't know how to change the size and quality of the text on the screen on Windows 7

  I just installed a new Windows 7 but I don't know how to change the size and quality of the text on the screen.  I tried all the things normal, resolution, size of icons, dpi etc but nothing gives me what I want.  The text in clear 'wonderful' thing is just terrible.  When I go through the 4 steps I see no text boxes which make the text nothing better.  All options are terrible, so the result on screen is too terrible.  When I do any huge I do not get a full screen of things - view the Start button disappears or I did not closing small cross at the top - of the suggestions to inprove the situation?  I must mention that my screen/monitor is 2006 - I need to buy a new one?  How much is this Windows 7 is going to cost me, or maybe I should go back to XP!

  I sincerely thank all you smart "technicians" for all the answers you always gave myself and all others who ask questions.  I'm not too smart with all this new technology as I fell into it very late.  I am now in my 60s and only started using a pc when I was over 50 years so...  In any case, I asked a question about the size of screen resolution and text and received much good advice from all that you guys.  I had recently changed in XP to Windows 7.  However, the bit of advice that I was given in 'Cyberking' here at the Portugal had set the resolution of the screen, the advanced settings, 75 to 60 Hertz Monitor tab.  Very basic, and the first question asked the technician (Lady) was "what size is your screen?  Naturally as a smaller screen that any 'techno' would be considered dead aid, solving the problem was simple and straightforward without me having to stretch my knowledge and my skills by downloading all programes weird (to me) or do the funny stuff in the bios or something else.  I send this comment to you for you to realize that the simple solution is not always bad and maybe we should go for the easiest first and then work up to the more difficult ones.

  Just for you all to see - now my screen resolution is perfect, the text on the screen is clear and legible without difficulty, even though the size of text and icon is small.  Clarity is all!

  Thank you all once again!   Best regards, Blondie blue.

• Call the base-dos .exe file, but how the input parameters and get the text on the screen of the BACK?

  Yes, I tried the similar topic before posting about this.

  I understand that we can use standard input of entrance of parameters of the System exec.vi, but still can not find an answer on "how to get the text on the screen of the BACK.

  1 seal of sw500912_2701test.exe is the exe of Basic-back , (change to rar .tar)

  2. double-click on the .exe, run this file. The first parameter is the rate band, the default value is 9600.

  

  3. setting the COM #.

  3.

  Can be useful to check that the command is actually being run. When the dos window opens is there any text?

  Try cmd /c "."

• The screen does not appear under the eyes

  original title: I use a screen flat tv for my monitor & for some reason, I don't see all of the screen. He cut all half an inch around the edge of the screen. Is anyway to fix this?

  I am running XP, I have a NVidia GeForce GT 240 video card & I run it via a HDMI cable.

  Hello

  This could be due to installed the wrong display drivers or a bad resolution that has been put in.

  Method 1: change the resolution of your screen
  1. open the screen resolution by clicking on the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  2. click the menu drop down next to the resolution, move the slider to the desired resolution, then click on apply.
  3. click on keep to use the new resolution, or click back to return to the previous resolution.
  Click the mentioned link which will help you to change the resolution of the screen below.
  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Method 2: refer to this article below mentioned which may help you in the matter of fixing.
  Troubleshoot Windows display the text on the monitor is not readable
  http://support.Microsoft.com/mats/Windows_Display_Quality_Diagnostics/

  Get the best display on your monitor
  http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitor

  If the problem persists you can also try to download the latest display drivers on the manufacturer's Web site and try to install then check.
  Here is the link to download the NVidia drivers for the video card NVidia GeForce GT 240
  http://www.nvidia.com/object/WinXP-301.42-WHQL-driver.html

  Hope this information helps.

• Can I change the text on the screen "This Document is password protected" for documents Document Cloud on signature?

  Is it possible to edit the text on the screen "This Document is password protected" documents sent for signature. I would like to change the language to my audience. Nothing fancy, just some text changes.

  Hi kenster9999,

  I have a sorry, but this is not possible. The way it is designed.

  Kind regards
  Nicos

• How to move text on the screen?

  I can type the text in the little boxes when place the text on the screen (not the titles developed - just place the text on the screen after hitting the "T" key).  The box is difficult to work, and I did not understand how simply MOVE it to a different area of the screen.  Is this possible?  I can't just click and drag it.  And why the cursor looks like this little arrow pointing to?  And why the box to keep changing shape on me, etc.. ?  Someone else has a lot of trouble with this?

  Here is a glance at the Titler Panel, with one selected area of text (visible Bounding Box) and ready to be moved. Pre 4.0 it's with but a few exceptions, will look the same.

  

  Hope that helps and good luck,

  Hunt

• How to view the fields on the screen but not printable?

  I have a text and the field I want to display on the screen but not print.  I chose the presence as 'Visible (display only)', but when I print the fields also prints.  No idea how I can make the fields in my form the two visible on the screen but unprintable.

  Try saving the document in dynamic PDF

• My iPhone my iPhone 5 guard by clicking on things at random, by clicking on the things im not clicking on and freeze momentarily. But the screen is not cracked

  My iPhone 5 guard by clicking on things at random, by clicking on the things im not clicking on and freeze momentarily. But the screen is not cracked

  You should go to the apple store and ask them to check it for you! You may have a faulty screen or faulty motherboard! in any case it is best to call or go to the apple store

• Why the Web page after only the third Center of the screen and not the whole width?

  Using firefox on a vaio z 13.0.1. All the websites I try to access to appear narrow, occupying only the third Center of the screen. Not such a problem with IE.

  Thanks to everyone for the suggestion. Firefox solution for what is essentially a Reso and problem of Zoom is unnecessarily complicated. I switch to Chrome.

• The screen backlight not working anymore on Satellite M

  Hello

  I have a problem with my laptop screen. The backlight of the screen does not work no matter how suspect more and I switch that turns off the screen when I close my laptop is broken.

  When I press the power button and release, a fast and light the backlight flash can be noticed.
  Does anyone have a solution for this so I can fix it myself?

  Thanks in advance, Stephan

  Hello

  I wouldn't recommend trying to fix it yourself if you n t have any experience with the laptop repair and do not be angry with me, but it seems that you don t have this experience
  In this case contact a technician and explain the problem

• I accepted the last update. Now, I can not display to the right of the main Itunes store, where top songs, etc would be. As the screen does not. Only on the HOMEPAGE of ITUNES STORE! Help!

  I accepted the last update. Now, I can not display to the right of the main Itunes store, where top songs, etc would be. As the screen does not. Only on the HOMEPAGE of ITUNES STORE! Help! I've tried everything. Google it. Searched through itunes, etc. It MUST be a bug, because it started right after I accepted the 12.3.3 update on my laptop running Windows 7 32.

  I count on the part of the main screen, which is not. Its strange. PLEASE HELP ME! In addition to the main page of the Itunes Store, everything else works fine as before. Music from my library work screens, etc.

  I also have exactly the same problem since the last update. Tried to find a way to solve the problem but no luck. Someone please help!

• Arm, wrist and the screen does not light.

  I just wanted to give a few comments. When I walk, carry heavy bags and I want to watch the time I lift my arm to look at my Apple Watch and the screen does not light. Maybe its because the movement of the arm is subtle, since I am carrying heavy bags. I was wondering if that could be repaired since both times I tried it, annoyed me. Walk in a street busy NYC with my groceries, I would like to know something, briefly, on my watch as I walk with the duty to stop or to disembark the bags.

  Hello

  It is a community of support based on the user.

  To make sure that your comments and suggestion are presented to the attention of Apple, you can submit the following form (all comments are read by Apple):

  https://www.Apple.com/feedback/watch.html

• Satellite A210 1AP - the screen does not turn

  I had a problem about a month ago with my Toshiba Satellite A210-1AP, just that the screen did not turn. Was working on the computer, all the lights were on. The light that shows the HARD disc flickered, as usual, but with display always off. So I stop, and the next time I tried it was warking as usual, with display turned on, he asked if I want to start windows normally or in safe mode (as when it is restarted abnormally). Then worked normally for a few days, and then it happens again. At this point, I could not go to the service (computer was in warranty, and how do you prove that something happens sometimes if it happened there). So I continued to use it, and as the time past the problem was more often. So I decided to go to the service.

  Guy in the service, said that the problem is the motherboard, so he changed the motherboard and it took months for him to do, and then when I called he said that it still does not. And maybe he has change rooms, display, graphics card is perhaps a problem, that he has not seen the problem like this...

  So my question is do you know what could be the problem? And the second question is can I demand of him, because he went from 30 days to give me a new computer rather change all parties to this issue?

  Thank you
  Nikola

  Hi mate,

  It's really hard to say what causes this problem, but I think that notebok technicians do a good job and they will be committed to repair your laptop as soon as possible. Maybe they ordered some new parts, but they are not available at this time

  Theoretically, all that could be the reason of this problem FL inverter, LCD screen, motherboard, graphics card, cable, etc.

  So I think you should call the technicians still what is the current status.
  But I doubt that you can get a new laptop for free. If it of still under warranty, it will be repaired.

• Status bar at the bottom of the screen will not allow

  Status bar at the bottom of the screen will not even when I try to activate with display > verified status bar

  This has happened

  Each time Firefox opened

  Hello Darryl.

  It is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

  Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and theme and this one for plugins.

  If you need help with one of your modules, you will need to contact the author.