Text templates created in After Effects for editing in Premiere Pro can be installed on an another workstation that has no After Effects installed?

Similar Questions

• What is the best intermediate codec should I use for editing in Premiere Pro CS6

  I am a photographer at video edting and unfamiliar with codecs. I work with video Time lapse 1920x1080p generated by Lightroom 4 through LRTimelapse, which uses the H.264 mp4 codec.  My video clip features movements of a camera bump that has stabilized through Warp, but there also slowed a little need to reach a specific length. String and time remapping can be done on the same sequence, so I think I need to export the clip stabilized string in an intermediate file, re - import in to the body and then slow down the clip. I tried MXF OP1a: class AVC-Intra 100 1080. Video re-imported mxf blurs when previewing, but is strong when the clip is stopped.

  1. What is the best intermediate codec for further editing?

  2. is it important what order are stabilizing Warp and time remapping?

  3 or is there a better way to stabilize AND slow down a clip?

  System

  iMac 27 i7 2.8 GHz quadruple-heart, Os X 10.8.2

  You don't need to export to an intermediate file.

  Add timeremapping, right-click on the clip and the nest, and then adds the string.

• How to properly configure a graphics card for SpeedGrade, Adobe Premiere Pro and After Effects?

  Okay, so I have the following system configuration:

  2 NVIDIA Geforce GTX 970 s

  5960 X CPU

  MSI X 99 game 7 motherboard

  32 GB DDR4 RAM

  256 GB and 1 TB Samsung 850 Pro SSD

  Basically, even if I have the whole system built together, I'm not sure how check and know whether or not Adobe Premiere Pro is in fact using the map graphic or not.  I know it has to be using some of them, otherwise it would not run correctly (as I discovered a recent experience).  However, I don't know if there is, perhaps, some settings in the NVIDIA Control Panel that must be configured so that Premiere Pro can use the card to its full potential.  Here's an example of what I'm talking about:

  

  In other words, they are (I'm sure) all of the default settings of the Control Panel applies to Premiere Pro.  However, I don't know if there are any parameters here that I should change or not.  So what I'm looking for an answer to this question:

  • What parameters, if any, should change for Premiere Pro (as well as other adobe applications that can use all the force of the 970 GTX)?
  • How can I check the GPU activity it is applied during rendering?  (For example, I can check with the Task Manager, CPU usage while I made to see that it is used at 100%).
  • If, perhaps, something goes wrong and even with the right settings, say that the card still is not fully used, what other settings can I change to ensure that the GTX 970 is fully used by Adobe first Pro/After effects/SpeedGrade CC 2014?

  If you want a reference point to measure the performance of Premiere Pro to your: drive system, GPU and CPU use our first Pro BenchMark (PPBM)

  When you finish running the test and then run the script, you will get this report

  

  In this case the result of my laptop (with a GTX 765 M GPU and SSD drives)

  1. The disk performance are explicit.
  2. Number 2 is a very complex timeline of seven layers with heavy assistance from CPU and GPU, without hardware acceleration GPU (processor only) should be longer than 1350 seconds.
  3. Three above is a measure of a chronology exaggerated using many, many GPU MPE accelerated effects and characteristics using a GPU to 99% of load (54 seconds above) and an export-only CPU of the same timeline (802 seconds).

  If you want to compare your results to others, that you need to register on the site PPBM7 to see the results.

  EDIT! I corrected the number 2 above originally, I said 900 seconds, but he was really longer than 1350 seconds

• My laptop crashed and I did not export a few videos that I had already edited in Premiere Pro. A technician will be able to recover my files and transfer my data on a hard drive, but I will lose all of the work that I put in the editing of those videos th

  My laptop crashed and I did not export a few videos that I had already edited in Premiere Pro. A technician will be able to recover my files and transfer my data on a hard drive, but I will lose all the work I put into editing these videos that have not yet been exported and who were saved only within the first? Help! I'm desperate...

  the work you have done in the first can be restored if all the project files and media are saved or recovered by the technician. tell the tech to find .prproj files and recover all the. If you have auto-enregistre turned on, they will appear when the tech search for the files *.prproj.

• Editing in Premiere Pro CS4 to Blu - ray disc

  Four years ago, I had covered an event to the SD, edited in Premiere Pro cs4 and prepared in the DVD format... Now my client wants what he re - edit and prepare the Blu - ray disc.

  Video of origin being shoot in SD format, which is the best option available for re - edit it and prepare for Blu - Ray disc

  Event is 60 Mts length. I convert this SD video to HD then re - edit and H.264 encoding for Blu - Ray disc

  Any guidance, help will be highly appreciated

  Explain to your client that the original was not shot in high definition.  DVD is the best it will get.

• Still for a long time, I can't install the update of security KB2416447 on my Windows XP.

  Still for a long time, I can't install the update of security KB2416447. But because Microsoft NET Framework 1.1 SP1 is missing on my PC, so I try to install Windows XPSP1a express but then I see the error message on the language is different. So I still have a security on my PC. How can he solved?

  Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 to give application Norton or McAfee application ever been installed on this computer?

  3. do you have a free trial Norton or a McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  ===============================================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• I just bought Photoshop CC2015 for my Mac laptop. Can I install it on my desktop Mac?

  I just bought Photoshop CC2015 for my Mac laptop. Can I install it on my desktop Mac?

  Yes.

  you are allowed installation on an unlimited number of computers.  the only limitation is that you can only sign-in (and therefore open) CP programs on, at most, two computers at a time.  but it is not a significant limitation, unless you have few internet availability.

• I downloaded the 2 files for CS4, but now I can´t install it how can I do?

  I downloaded the 2 files for CS4, but now I can´t install it how can I do?

  One of the files must be an exe file.  Run that file and it must extract the information from the other file and install it.

• my project file will not open as it was created on a newer version of Adobe Premiere Pro and cannot be opened with this version. What I download?

  my project file will not open as it was created on a newer version of Adobe Premiere Pro and cannot be opened with this version. What I download?

  You should be able to update your version and get things working again.

• Make After Effects lower third editable in Premiere Pro

  A friend has created some lower thirds using After Effects.

  I want to be able to edit (change text) within the first that I will use them a lot.

  Is this possible and if so, how?

  Thank you, Mark

  PS. I have just moved from Final Cut Studio, which I use for more than a decade.

  It is not possible now, but it will be in a future version of first Pro CC

  http://TV.Adobe.com/watch/Adobe-at-NAB-2014/whats-new-in-Premiere-Pro-CC-NAB-2014/

• What is the best configuration for stereoscopic editing in Premiere Pro cc 2015?

  After the native 3D with Red epics shoot, now I want to change ofline, 1080, using Premiere Pro.  What plug-ins is recommend Adobe?  That poster?

  Hello

  Please see system requirements | Adobe Premiere Pro

  Kind regards

  Sheena

• How to edit (re-scale) a PDF image for use in Premiere Pro?

  Hello!!!

  I am new to Adobe Photoshop. I need to know how to select an image from a PDF file in Photoshop and resize it also so that I can put it on Adobe Premiere Pro CS4 for a video with specific PAL 720 x 576 (DVD sound!).

  Also, I have to make sure that the image is not pixelated in the video.

  Can anyone help?

  Thank you, very much!

  Why bother? You can export images directly from Acrobat to help extract the image and it will spit them in any resolution or quality, they were integrated. You would need this info, anyway - you can import a PDF page at 300 dpi, but in fact it can intensify the images. You know, a 72 dpi image to improve by force-resizing. Once you have your images in any size, do not hesitate to use standard (crop tool) cropping and resizing options (Image--> Image Size) in PS to get them to the right size of 576 x 1050 for the equivalent pixel square a large video screen. First will successfully import it and convert video / DVD aspect ratio.

  Mylenium

• Iphone editing in Premiere Pro 6

  Hi, can someone please guide me through the best way to import and edit images iphone 6 in Premiere Pro?

  My problem is that the video and audio are out of sync.

  The basic fix is to change the frame rate 'constant' before importing it at first.

  However...

  Here's what I've tried and here are my problems.

  1. so first of all, here's what I do, I opened "Photos" on my Mac, import the video and then drag this file in my computer.

  2. If I take this file directly in the first, the video and audio are out of sync after 2 minutes.

  3. I'm so trying the brake hand and apply a constant rate. Handbrake did weird things to my video as change the aspect ratio and there is no way for me to cancel it in the settings of the image.

  4. I have try MPEG Streamclip. Sort of works, but even at 80 percent of quality, it lowers the resolution and that it increases the file size of 1 G to 6G! Also change the colouring a bit.

  I've been dealing with this for a while and scroll through all the help topics and do not find a solution. Help, please!

  Thank you

  Common problem with phone pictures (webcam, screencapture).

  Converted with HandBrake constant framerate before importing in first

  Select the file via the Finder. Try to avoid other programs import or something else.

• Can I capture with Final Cut Pro and edit in Premiere Pro?

  Because it appears first has problems with capture - at least for me, but as I see it for others as well - and I can capture with iMovie, I take it with Final Cut Pro for capture - cross for Adobe Premiere and the suite for editing, then finalized? Or is it a problem to copy the photos/files from one program to the other (they would be clearly identified if I could just import first shots later?)

  Thank you

  Rob

  Hi Rob,

  When you are capturing HDV into FCP, it creates a specific Apple HDV codec. It is a codec that is not available unless the FCC, movement or compressor is installed.

  Two solutions of workaround would be to use Premiere Pro on Mac with above mentioned applications on the same system or convert a codec which can be read in first.

  Best,

  Peter Garaway

  Adobe

  First pro

• Edited on Premiere Pro generic logo

  Hello

  The Director of a film that I edited wants to add the 'edited on adobe premiere pro logo"at the end credits is this something I need to do? If yes where can I get this logo for?

  Have a look here:

  Copyright, brands and DMCA permissions | Adobe