Text to phone Varizen

Similar Questions

• Why the back my mail list, text and phone iphone 6 freeze after upgrade ios10

  Why my list of e-mail, text and phone iphone 6 freezes after upgrade ios10?  Have you tried to turn it back on.  Becomes a real pain in the uknowwhat.

  I had the same problem at first but I was testing the first version of ios 10.  but the reason may be due to the low storage? If your storage space is ok please go to settings then general try to look for the software update again just to make sure that you use the latest version of ios usually there a few times an update immediately. If none of these solve the problem, try now button the power button and the home button at the same time (the screen of your iphone turns off a few seconds) touches both simultaneously when you see the apple logo on your screen if all else fails you can try connecting your device to itunes on a pc and run a quick diagnostic test? you go to itunes on a pc if you have already installed on your pc, laptop etc... Look at the upper left side... Click the help... Go to the bottom of the list to "Start the diagnosis" (make sure that all the test boxes have a tick and click ok to run the test) PLEASE NOTE your iphone you will need to be connected to the computer before hand... hope this will help you know if there is a problem, but when I came across this problem with my camera it was because my storage was almost full on my device and in icloud if This is the case then you need to maybe buy more storage or delete applications or games, you do not use this should help solve the problem of storage (if your device is low on storage)? hope this helps somehow.

  Nice day.

• Apple Watch is no longer display of contact names - only the phone numbers on the texts and phone calls

  PROBLEM: When I receive an SMS or a phone call on my IWatch, it now shows only the phone number or e-mail address of the sender, rather than their names.  At the same time my IPhone matched 5 c displays the names of my contacts perfectly list view text message or phone call.  This problem just started occurring in the past week.

  CAUSES: unknown - it worked one day and the next day it didn't.  I don't remember edit particular parameter associated with it. Although my circle of friends on the IPhone appears differently now, too, without the my change.

  TROUBLESHOOTING: I turned off my Iphone, tried resetting, powering my iwatch and checked the settings for the IWatch on my Iphone and my Iphone settings.

  PRODUCTS: My software on my Iwatch says it's updated: OS 2.2.1.

  My Iphone's software is also updated: IOS 9.3.2

  My sister is also having the same problem with his Iwatch paired with a phone SE 5.

  I wonder if this is a recent development and how to fix it.

  Hello

  It can help restore your sync data:

  • On your iPhone, in the application of the watch, go: Watch My (tab) > general > reset > tap reset sync data.
    • Nothing seems to happen when you tap it, but the process will be executed in the background, invisible to you, so allow a few moments it ends.

  If you have not already done so, you can also activate iCloud Contacts:

  • On your iPhone, go to: settings > iCloud - turn on the Contacts.

• Motorola Photon / texting on phone

  Hello

  
  
  

  Y at - it a setting or something I'm missing?

  
  
  

  I can't text while I'm on a phone call.

  
  
  

  I was able to do it with all my other phones.

  Wow! It's strong and pink!

  When in a call if you press the home button, this will bring you to your home screen, and you should see that the higher notification bar flashes green. This is to remind you that you are on a call.

  But once you are in your home screen, you should be able to go to your text message app and send a message.

  Thank you

  J

• What is the best way to save/download msg text from phone to computer?

  I know that I can email to my email address so I can see it on my computer, but this method does not display the text msg date time stamp. So, what is the best method, where no information is lost?

  Hello

  1. What is the brand and model of the phone?

  2. using windows mobile?

  If you use Windows mobile, then I suggest you to post your query to:

  http://answers.Microsoft.com/en-us/WinPhone

• How to create a diagonal line through text and phone numbers

  I read another post of Indesign who had a diagonal line

  the text, I found this interesting technique and she wondered how

  do you? It is done with character or paragraph styles? (see image below)

  I may never need to use it, but thought it would be interesting to know how to do it.

  just in case where, it can be simple to complicated?

  Your help and your knowledge will be apprieciated

  TREX

  

  Thanks John.

  This is really useful.

  TREX

• How to make a 'active' phone number in the text box?

  I'm testing in 10.1 and 10.2, using the following QML simulators.  What I'm trying to understand is that 'rules' the text box used to set the active text, including phone numbers.  All I'm trying to do is to put a phone number in the text box that my users the opportunity to click on it to the phone.  But I can't make it work, or more exactly, may not get the phone number to become active.  .

  As you can see that I tried a variety of number formats, some specific UK because I was afraid that he may use country specific recognition, but nothing I try works.

  On the other hand the address which I also put in the TextArea is 'hot' and started the map.

  FYI, the client is running in Canada on Q10s using 10.1.  The numbers are also completely fictitious, if they work, then that is a stroke of luck.

                  TextArea {
                      inputMode: TextAreaInputMode.Text
                      editable: false
                      content.flags: TextContentFlag.ActiveText
                      text: "#123 1234, #123-1234  ph: 780-784-1231. ph: (403)218-1248. ph: 403-242-1231. ph: (01637)123456. 81 Street NE, # 101 ,, Calgary. "
                  }
  

  I saw this:

  http://supportforums.BlackBerry.com/T5/native-development/textarea-showing-quot-phone-numbers-quot/m...

  I was expecting that I didn't set the attributes for the text using C box.

  And I don't have permissions phone - eslewhere in the application that I detect when the user is on the phone.

  Any ideas on how I could get a phone number in a TextArea to be active, would be appreciated.

  Well, for what it's worth here's what I get with your data :

  

• speak to the text

  I need or how to get the microphone on my text messaging so I can talk to the text. my phone does not display the microphone

  Is the phone on silent? This can cause the microphone to be unavailable

• Messages on another phone

  Riddle me this!

  My wife and I share the same Apple sign in.

  When we are home we have no cell service (ATT).

  When turn us our phones on airplane Mode and allow our phones call via WiFi, everything works great.

  But when I send a MMS text my phone xxx-xxx-7828 rom, the person receives, but it seems to come from my wife's phone xxx-xxx-2267!

  And when they respond to the text, the answer goes to my wife phone... not mine!

  Thoughts?  Thanks in advance.

  Step 1 - stop sharing the same Apple ID

  Go to Settings < messages=""> send & receive.  Here, you'll see how you, messages are sent (form what number/e-mail/etc)

  Even if you share the same Apple ID for parameters > iCloud & settings > App and iTunes Store, you want do not want the same Apple ID for parameters > iMessages > transmission & reception or settings > FaceTime.

  Good luck!

• How can I get through my hearing aids Halo text alerts?

  I recently bought halo hearing aids, my 5s, OS 9.2.1 rings through them very well, but I can't listen to the text or email alerts, ringtones of reading button is enabled and set to auto audio routing, any suggestions?

  If you don't have already figured that this out there is a setting in trulink not the phone. Go to settings in the application, the right top gear icon. In the appearance tab, you will see alerts, you can enable alerts there. 1 switch on the calendar, email, social turuns. Each application must have alerts in the iOS. I have not found a way to have a sound alert for text messages. I do not use trulink alerts, was a troublemaker that I receive so many emails.  I had a Apple Watch LIKE haptics for alerts. Text and phone calls. It is much less disruptive if I'm in a meeting or conversation as system sounds.

• iPhone 6 not getting or sending calls or text

  In the last two days, my iPhone 6 texts are going through.  I send a text, but it shows no 'delivered' or 'read' as before.  The recipient of the text does not receive the text.  My husband has the same iPhone 6 like I do and does not receive my texts.  Phone calls do not resonate through and I don't get the voicemail alerts.  I know that I have a voicemail message, because I see a number on the symbol 'Message '.

  Check the key "secret" on the side of the unit and after that, check the settings for do not disturb. Problems with sending/receiving SMS to non - iOS devices would be treated by the carrier. It is a function of carrier. If your husband does not receive your iMessages, then go to settings > Messages and make sure that iMessage is activated.

• You can text or call using hp slatebookx2?

  I'm not a techno wizzard, so forgive the stupid question.

  You can text or phone call from hp slatebook 7?

  I can't locate the sms settings in all environments. I run contact lists in various pkaces, but no icon on the desktop.

  Very confused and frustrated. Any help is appreciated.

  OK, a different device, same answer.  It is not a mobile phone.

  Ask you to work around this problem, aka software to pretend it's a phone?

  There are a lot of apps that will make calls to landlines, but there is a cost involved.  For example, Skype can call landlines but only if you buy minutes from them in advance.  It can make video calls to other computers, tablets and phones for free if the program is installed on the receiving device.

  I have a soft of Xfinity that let's place me and receive phone calls from my tablet, because I use them as my internet provider and telephone.  It can also send TEXT messages from my landline 'House' (which confuses the heck out of my friends when they see the phone number!  (LOL.)  This application will not work unless you are his client.

  Perhaps, some other reading this thread can consistent with the recommendations of the app!

  WyreNut

• Z10 blackBerry how to set my phone to see the category of spam?

  Unlike most of the complaints, my phone filter all the spam that appears on Outlook.  Part of this is not spam and I want the same choice that Outlook gives me.

  Hello and welcome to the community!

  Unlike your text, your phone without filtering, either... it is not have a capacity to do so. On the contrary, everything it does is reproducing what your server has, and so another interface must be filtering emails to another folder.

  Depending on the features of your e-mail server, you can show this folder of spam on your device. Go to settings > accounts and select the desired account. Do scroll settings e-mail and if there is a selection available for "Edit file settings", choose which. Now scroll the various files it displays and ICT, the check box next to those you want to see on your device.

  If you do not see the selection "Edit file settings", then your mail server is not able to view the folders on your device. In addition, even if you do not cause him show this folder, you may or may not be able (on the unit) is to do something about the fact that the elements are moved in. Finally, if what you're referring is the Outlook client junk e-mail filter, then it is probably even not stored on your server and is only in the Outlook client, making it impossible to display on the device (only the items on the server can be displayed on the device).

  Good luck and let us know!

• empty text message to certain provider

  Hi people, I use a sms listener widely documented in my application:

  public void run() {}

  try {}

  _DC = ("DatagramConnection)Connector.open("sms://: ");

  for(; ) {

  If {(_stop)

  return;

  }

  Datagram d = _dc.newDatagram (_dc.getMaximumLength ());

  _DC. Receive (d);

  Address of the string = new

  String (d.GetAddress ());

  String msg = new String (d.getData ());

  System.out.println ("message:" + msg);

  System.out.println ("to:" + address);

  }

  It works very well for texts normal phones, but when I receive a message from Clickatell message is always empty even if when I go to the Inbox of the message is there with all the text. Any ideas why it does this?

  The other odd thing is that the Message received: to: print on the same line, when the message is empty, but on separate lines when the message has something.

  I was debugging for Age but no joy so any help much appreciated.

  It turns out that this is a problem of Unicode, it does not seem like trying to read Unicode text messages...

• Less than 24 hours of charge dead phone blackBerry smartphones

  Hi I have a blackberry 9300. Three months despite showing a full charge within minutes to make or receive a call or a text, the phone goes dead. I bought a new battery. Arises again the same thing. I don't have I'm aware of other operating outside of the basic ones on my phone that will run without my knowledge. I disabled the blue tooth as well. Please please can someone help, thank you very much

  A battery may fail in different ways and have different symptoms, in function. You see one of them.

  I figured it was a knockoff and not an OEM battery.   It is OEM, and you bought from a retailer, I would tend to believe that the battery was ok when you guessed it.

  As the battery worked for a while, I tend to doubt that there is a problem with the device.

  If it were me, I'd get another battery and change my habits.   Top it off when you can and load when you sleep, see what happens.