Text tool will not work: something prevents the text initializing engine

Similar Questions

• The cutting tool will not work in trying to capture the menu drop-down

  I've recently upgraded to Office 2016 from 2013 and since then my Snipping Tool will not work correctly. I can always capture what I want except for the drop down menus. Eight other users are connected to my network of the company; all Windows 7, all Office 2016 and it works on all the computer but mine. I opened the Snipping Tool, click Cancel (tried to escape, too), and then open the menu drop down, press Ctrl + print screen and nothing happens. Can someone help me?

  I just thought of it myself. Used to work in previous versions using the Esc, then press Ctrl + print screen. Now, it's a little different.

  1. Your screen are preparing to capture you want, with the exception of the drop down.
  2. Open the capture tool and choose the type of capture you want (I use the Rectangle) and now the new part... Choose a delay for however many seconds you have to when you press New when you can open the drop desired down.
  3. Click new. (The capture tool will activate not to but the number of seconds you have chosen late.)
  4. Open your drop desired down and wait for the tool.
  5. Proceed as usual.

  Hope that helps!

• Horozantal tool will not work in CC 14.2

  Horozantal tool will not work in CC 14.2. The tool creates the text layer, but the layer is emty. The type tool Horozantal has by default. So why isn't the text appears there? Here is the video screenshot for error http://youtu.be/G5kiLGyG_mM

  Depending on the size of your image, 12 pt is too small to appear.  Have you tried a larger font?  Also you did not show the character Panel in your video.  That has a lot of useful information.

• Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Would you like to share why you must do a clean install?

  You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.

• After you load an update, my reboot will not work. Again the sleep & Shutdown work. All other features still work.

  To run Windows XP.  I can't finish an update because the restart function will not work (be it at the end of the installation of the update) or the Start button

  Hi Beaver6,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. What happens when you try to restart the computer? You receive an error message?
  4. You have security software installed on the computer?

  Method 1

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If the above step failure may refer to the article and try the steps mentioned, check if it helps.

  Advanced Troubleshooting for shutdown problems in Windows XP

  http://support.Microsoft.com/kb/308029

• Windows Update service will not work after upgrading the hard drive

  I'm running Windows Vista 64 bit, Home Premium SP2 with 8 GB of ram. I recently cloned my hard drive OEM of 500 GB, 5400 RPM Toshiba MK5055GSX via a standalone, dual drive bay dock for upgrade to a 750 GB, 7200 RPM, Western Digital WD7500BPKT. Since the clone/upgrade, Service Windows Update does not work and gives the message: ' Windows Update cannot currently check for updates, because the service is not running. " You may have to restart your computer. "And Yes, I checked and everything related to Windows Update seems to be 'turned on' or well defined, but the service will not work. Notes; Windows Update still works with the player "OEM", it is only the new WD drive that has the problem. Thanks in advance for any help or suggestion on getting this problem is resolved.

  This fixes my laptop http://www.realworldrobotics.com/troubleshooting-help/windows-7-64bit/windows-update-service-not-running-after-upgrading-drive

• HP 6520 will not work after changing the black ink cartridges

  Changed the cartridges and now black ink will not work. This is the second or third time only to change the cartridges - did not have a problem before, but of course, it is while the printer was still under warranty. It is now about a year and a half.

  I used all the suggested diagnosis - head cleaned, head aligned, etc, etc, etc, and nothing has helped.

  The black cartridge worked after the swap, but with a few lines do not print or missing--now produces almost nothing.

  Cartridges color was wonderful at the beginning of the troubleshooting process, but now they're starting to not look right - with spare no effort to correct the print head, he seems to be making it worse.

  Suggestions?

  @scrdagain

  I will send you a private message (departure from the envelope at the top on the right)

• In CS6 Clone Stamp tool will not work with Tiff files

  All of a sudden the Clone Stamp tool does not work when you work on a tif file. Yes, I get the circle with + sign when I press the ALT key, but tool not clones.

  Hi Trevor!

  I discovered that it affects all file extensions.  Files were created after adjustments in Bridge. Layer is not locked. The opacity is 46. Now that I have reviewed your response, I was watching a FAQ on the same thing. Honestly, I didn't know you can reset tools.

  I found out how to reset the CSTool and voila! Now, works great.

  Thanks for the tips...

  Dan

• El Capitan woes. Safe mode, test hardware will not work. Restart the loop, kernal panic. Any sugguestions?

  I have a MacBook Pro 13 "2011 start. He had some OS X Lion when buying.

  Two years later I upgraded to OSX Mavericks.

  
  Less than a week ago, I did an installation CLEAN of El Capitan. Wiped my HD and installed in El Capitan. I did it with a bootable USB key. The installation went well. Throughout these years, I have drive repair/check, repair disk permissions when necessary. I have a 500 gb HDD installed, and I kept it about 200 GB of free most of the time. Before and after the installation of the El Capitan, disk utility has repeatedly demonstrated the hard drive in good condition.

  Last night, I wake my computer from sleep mode, it seemed to be frozen.

  Some applications still running - Google Chrome, VLC.

  Mouse still worked. Any click of mouse or track to effect not anything on the screen.

  I pressed Command-Option-Esc force quit and stop chrome by there for.

  Then I rebooted, went to the screen toolbar and progress apple, but then hung on a blank grey screen for about 7 minutes.

  I stopped him. I disconnected all devices.

  I restarted now down option, same result

  I restarted now pressed D, same result.

  I have reset the NVRAM and MSC with the same result.

  I restarted again and realized account of the progress bar was actually progressing just at an incredibly slow pace. So, I waited, and finally made it back to the login screen. IM speaking 20 minutes more.

  Once I finally got on the desktop - I did another disk check and he said everything was fine with my hard drive.

  I checked the activity monitor and shows nothing cluttering of CPU or memory.

  I emptied the login items (System Preferences > users and accounts > login items) that could be the cause of it.

  I would like to have checked permissions of the drive although I doubt it would have helped, but it seems that El Capitan does not provide this feature in disk utility more?

  I then tried the same thing - restart + hold down D to see if I could launch a kind of diagnosis, something! It remains just started up new connection, but it bit more quickly this time.

  I thought I was clear, but after reboot once more he would go in apple logo/progress bar and then show a weird code on top and then directly to the message ' your computer restarted because of a problem, press any key or wait to continue to '... etc. in various languages. The computer begins to restart once again to do the same.

  I turned it off then reset the PRAM, SMC again.

  I rebooted into recovery mode to check my HARD drive. Well, now for the first time, he tells me theres something wrong with my drive and cannot be resolved. I find it so weird because it worked very well on the Mavericks and Lion for years. I have never had problems - start the system or hard drive related.

  Well it finally helped me get to Apple Hardware Test. Click on "test" and everything seemed to go well up to the mark of 2 min 0 s, thin progress bar froze, trackpad would work, but the mouse would be insensitive by seconds. IM guess that it is a hardware or a disk hard question then? Player's fault? Do not know how to install El Capitan would casue those things...

  If I get a new drive and start all over again, I'll be able to reinstall my programs purchased in the app store? The only thing I have right now is Logic Pro. On a PC right now and not can't find anyway to see my purchase history. Checked apple.com and shows no purchase for 90 days, so I guess I need to check through to iTunes or the mac app store for really?

  Thanks for reading and any help is greatly appreciated.

  App store apps are linked to your Apple ID.  Change the HARD drive will not affect your ability to access these applications.

  It sounds that a new HARD disk is in order.

  Ciao.

• Direct selection or the powered hand tool will not move object with the mouse! Frustrated!

  Since this recent update, I was not using my mouse to move an image, text, etc. I use CC2014 on my Mac, not working not Yosemite.

  I have already tried:

  Clicking on some keys when opening Indesign so it will clear preferences - did not work.

  Restarted my computer - will run for a few minutes then stops

  InDesign uninstalled and reinstalled - nothing

  Uninstalled full CC suite and ran CC cleaner - removed all instances of the Adobe folder on my mac, removed trash, restarted the computer, and reinstalled - there is nothing, same problem.

  I am really frustrated because I really don't want to use my arrow keys to move the items. All the solutions to get rid of this annoying problem?

  Thank you in advance!

  Try disabling Pushbullet.

• Keyboard will not work to start the Recovery Console repair function

  I would like to use the repair feature in Windows XP Professional Recovery Console when starting Onboard or USB CD-ROM drive.  My keyboard works very well to enable F12 and select boot device.  Windows Setup starts and then loads bunch of pilots - looking... but then my keyboard won't work for select 'R' to start the Recovery Console repair.  All this started because I uninstalled a Lexmark printer and it seems that the driver Lexmark LXBTtime.dll lack now but still wants Windows to start.   So now Config\System will not load.  I saw some threads in this forum recommend that my wireless keyboard does not work - so I borrowed a USB wired keyboard - but still the same problem.  Cannot select 'R' - the keyboard light turns off and of course not recognised by Windows Setup.  Any ideas or suggestions?  In addition to the purchase of a MAC (it was my suggestion of neighbors :-)   Thanks for the review!

  Hello

  In addition to the suggestion of Daavee I would also ask you try another disk of Windows XP installation and also you can try with a keyboard five General PIN and check.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Lightroom 6.5 will not work after restoring the windows 10

  First of all, let me say that Adobe support for a pro user product sucks. Really? no other than this support?

  My windows 10 workstation crashed and did a restore. I understand that it is early and I had to reinstall the update 6.5.

  Problem is that Lightroom does not open because he repeats to me there is problem of catalog and will not allow last backup is only a few days to work.

  Then. How to solve this problem?

  The only thing that worked was completely reinstall Lightroom 6, and then apply the latest update.

  After that, I was able to use the last catalog had been saved.

  You guys seriously need better than this forum support if you want to think of yourself as a product for professional use.

  When all else fails reinstall, but this kind of support, it's not what you need.

  Capture One to become a better alternative if you have a serious problem.

• bookmarks and other tools will not work when you click on

  nothing happens when I click on the items on the bar including the bookmarks tool. If I restart the program sometimes it will work for awhile.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• the icons on the desktop will not work nor does the beginning menu__

  None of the icons, or the Start button don't work

  awadlow42,
  We could use a little more information to help us on this issue.

  What version of level pack XP\service do you have?
  Do you get any error messages?
  Are you able to navigate\open all items with your keyboard?  The main windows on the start menu open keyboard?
  If something has changed on the system recently (new hardware or software)?
  You are able to access your BIOS or screen boot options and navigate in their midst?
  Have you tried to boot mode safe?  If this is not the case, try to start safe mode and you will see if the elements are functioning normally.  This link talks about fashion without failure: http://support.microsoft.com/kb/315222

  Let us know this information.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Filter tool will not work

  I'll go through the steps to configure a folder and click the button to run the filter, but nothing happens. No filters are running, and there is no addition to the filters log. The filter tool has worked a few times when I first downloaded TB, but I was not able to make it work properly since then.

  Please post a picture of the filter you have created.