Thank you for your help. I applied some steps that you suggested, but I still receive the message with your logo on my Inbox page. What should I do?

Similar Questions

• When I launch the new photo or the new HDR feature fusion device, they start for about 10 seconds, but then I get the message error "an unknown error has occurred."  What should I do?

  When I launch the new photo or the new HDR feature fusion device, they start for about 10 seconds, but then I get the message error "an unknown error has occurred."  What should I do?

  There is a problem with these models of Leica cameras providing accurate information in the EXIF data F stop. Photomerge for HDR and Panorama will use this information to "mix" the image files. A solution has been found using an EXIF here Editor:

  Re: LR/ACR Pano merger combining Glitch

  This may or may not be the source of your problem, but worth investigating. Try to use any other device non-Leica and do a quick test Panorama or HDR and see if you get the same message.

• I am trying to download the InDesign CS5.5 update and continue to be "Update failed" "please contact your administrator if you want to apply updates on your computer. I did this and now have administrator rights, but I still get the message. Ho

  I am trying to download the InDesign CS5.5 update and continue to be "Update failed" "please contact your administrator if you want to apply updates on your computer. I did this and now have administrator rights, but I still get the message. How to do the update?

  Direct updates
  -----------------

  https://www.Adobe.com/downloads/updates/

• When you try to install Vista, receive the message "this computer hardware can not supported booting from this drive." Disk 0 unallocated space.

  Original title: Disk 0 space unallocated: when I tried to install Windows Vista.

  Unallocated space of disk 0: when I tried to install Windows Vista on my laptop and the screen table "Windows Installer"down I got the important message"hardware on this computer may not support booting to this disk. Make sure that the drive controller is enabled in the computer's BIOS menu "...

  Name: Disk 0 unallocated space total size 149.0 GB free space 149.0 GB Type: (empty).
  Please tell me what to do, I'm desperate. Thank you!!!

  Hi n m,

  Boot you from the DVD to start the installation, or have you started the installation in the existing version of Windows?

  I would like to know if you want to perform a new installation or an upgrade installation.

  You can not install Windows on an unallocated partition, if you install vista on brand\fresh the new hard disk, you will need to create partitions on the hard disk.

  Method 1:  Format the partition and then try to install Windows Vista.

  Important: The applications on the computer and all data will be lost when you format (New Installation) of the partition.

  Method 2: You can follow the steps mentioned in the article below

  Error message when you try to install Windows Vista on a computer that has initialized the hard drives: "this computer's hardware can not supported booting from this drive.

  http://support.Microsoft.com/kb/925481

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  Ideas:

  • When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  I tried to download the RegCure as advised, but the problem still exists...

  Who advised you to 'download... '. RegCure? Doing so could only worse issues! If you ever think that your registry database must be cleaned, repaired, boosted or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Recently I replaced my hard drive on my imac and now when I try to open Ps Id and another app for my CS4 I have error 150:30. How can get over this? Thanks much for any help.

  Recently I replaced my hard drive on my imac and now when I try to open Ps Id and another app for my CS4 I have error 150:30. How can get over this? Thanks much for any help.

  Hello

  Please see error "Licensing has stopped working". Mac OS

  Kind regards

  Sheena

• I get the error code 643 during the installation of the dates... I tried yesterday, some steps that have been put to me... they did not work... Please help

  I get the error code 643 during the installation of the dates... I tried yesterday, some steps that have been put to me... they did not work... Please help

  There are 2 updates will not install... Ive had this problem for the last 6 months

  See if this Microsoft Support will help you:

  http://support.Microsoft.com/kb/976982

  Note: there are 2 methods. If the August challenge it for me does not help, try a 2nd.

  Another article to number 643
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

  .........................................................................................

  Take a look at this answer of MS Answers forums:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/what-is-error-code-643-Windows-vistaunable-to/4ab6dd4e-e9eb-4a0f-b822-ad976e2c33c6

• I dealt with this problem for months. Even hired a comp tech to fix it and still have the same question. There, nobody helping me?

  I dealt with this problem for months.  Even hired a comp tech to fix it and still have the same question.  I had my computer wiped and windows 7 and 8 then reinstalled by a professional.  This all started when I upgraded form 7 to 8.  After 7 to 8 my computer kept getting this error. . kept crashing.  He was supposed to be fixed and it still does the same thing. I was told then move to 8.1.  I have always the same coming error.  I'm not on computer.  IS THERE ANYONE WHO KNOWS HOW TO FIX THIS?  Someone who can explain to me step by step how to fix?  I've tried everything.  Error 0x0000005c [settings 000000000000800 0x000000000000000B x 0 0 x 0000000000000000 0 x 0000000000000000]

  Hello

  The upgrade to 8.1 was perhaps not the best thing to do...

  A lot of people are having problems with it also.

  If it is a desktop computer, have you checked the wall outlet and the plug on the back of the computer?

  Your point about starting the tone certainly as a power or a hard disk problem...

  The problem with you mouse pointer could be related to a feature called quick start...

  Your other problem also, perhaps... Try to turn it off and see if it helps...

  This feature works only when you make a STOP and then start.

  It is not perform a RESTART.

  Turn on or off...

  Go to the control panel... Power options, and then select choose the power what buttons on the left.

  Then select change settings that are currently unavailable near the top center of the screen...

  Lower on the window, uncheck the quick start.

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• I am not able to adjust the height of a page on my site. I try to move the blue mark on the left side and it does not move. What should I do? Thank you

  I am not able to adjust the height of a page on my site. I try to move the blue mark on the left side and it does not move. What should I do? Thank you

  Hello

  could you please try to find an empty project as rectangle/text box, especially at the lower end of the page. Use Edit-> "Select All" to select all elements on the page, it will be easier to locate.

  Let me know if it works

• I'm trying to install Quicktime / itunes, but I still find the icon indicating that there is another ongoing installation. I tried to see what the installation is still ongoing, but have'nt found nothing. Help please..!

  I'm trying to install Quicktime / itunes, but I still find the icon indicating that there is another ongoing installation. I tried to see what the installation is still ongoing, but have'nt found nothing. Help please..!

  Hi JDSoor,

  Thanks for posting. Two or more instances of the service Msiexec.exe cannot be launched at the same time for two different products. An install or repair processes should finish before the other process can be launched. Go to processes in the Manager of tasks (so press CTRL ALT + DELETE) then press the processes tab and look for to MSiexec.exe and press "end process." You may need to do more than once.

  I hope this helps. Let us know if this or do not resolve your problem.

  Thank you

  Shawn

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I transferred X 1 pro overall to another PC, but opening I get the message "serial number you provided is valid but calling it a product was not found on this computer", the drop-down list of products responding to the does not contain the ProX1 op

  I transferred X 1 pro overall to another PC, but opening I get the message "serial number you provided is valid but calling it a product was not found on this computer", the drop-down list of products responding to the does not contain the option ProX1.

  Hi Carl,

  It seems that you have installed Acrobat XI pro as an upgrade and an upgrade you will need a serial number for a product older Acrobat X, etc. 9:

  See, error: "this serial number is not for a product calling it" | Adobe Creative Suite

  Also, I checked with your Adobe ID on the forums and I can only locate XI of Acrobat pro upgrade recorded, please check if you have registered an earlier version of Acrobat on some another email to get this serial number.

  Let us know if that helps.

  Kind regards

  Sandrine Bani

• I tried to play some movies that I downloaded, but it says that I need the right codec to play.

  Original title: watch videos on media player

  I have an old computer for my son with XP on it. I tried to play some movies that I downloaded, but it says that I need the right codec to play. How can I fix that I can watch these videos?

  Hello

  1. what version of windows media player do you use?
  2. what type of media files are they?

  Check the following article to see if these files are supported by the Windows media player installed on the computer. If these files are not supported, then you will need to download the third-party codec to play.

  Information on the types of media files that supports Windows Media Player
  http://support.Microsoft.com/kb/316992

  THIRD WARNING:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information:
  How to Download Codecs automatically in Windows Media for Windows XP player
  http://support.Microsoft.com/kb/291818

• When connecting with an Android phone through Verizon for attaching to the internet, receive the message "Microsoft (C) registry of Windows has stopped working".

  twice now that I got "Microsoft (C) registry of Windows has stopped working". Looking for online solutions, it tells me to update... and yet my Windows Update is underway. What is going on??

  I am traveling and using my Android phone by Verizon to tie to the internet... This could be the cause?

  Hi BetheForcia,

  Exactly when you receive this error message?

  Usually, this can happen due to data execution prevention.

  In order to diagnose the problem, you can check in the event viewer to determine the cause of the error and after return with details of the event viewer.

  What are the information in event logs? (Event Viewer)

  You can try to add it in the exception for the prevention of execution of data and check that it works.

  a. go to Start, Control Panel and click on System.
  b. now, click on the Advanced tab, and under performance, click settings.
  c. click on Data Execution Prevention , and then select the Turn on DEP for all programs and services except those I select: radio button.
  d. now click on the Add button and navigate to C:\Windows\System32 and choose the regsvr32.exe file. When you receive the message indicating it could make your computer becomes vulnerable to attack and unprotected, simply click OK to continue.
  e. click OK , and then click OK to exit

  Hope the helps of information.

  Please post back and we do know.

• Where can I get support for a problem with a member of my team of cloud that receives the message that there no access more even if he is invited to the team?

  Where can I get support for a problem with a member of my team of cloud that receives the message that there no access more even if he is invited to the team?

  Please try to delete this user and try to reassign the seat for him. You can try to contact customer service for assistance. Please check the manage your cloud creative teams membership