That became the command RUN?

Similar Questions

• Trying to enter gpedit.msc in the command run. Does not. Try to disable auto-start for usb devices.

  Hello. I read that I can go in gpedit.msc through the command run. I can't get in. He tells me this message: "Windows cannot find 'gpedit.msc'. Make sure you typed the name correctly, etc... »

  It is the process that a memory patriot employee was told in email: Ok then please try this.

  1. click on start, run, type Gpedit.msc in the Open box, and then click OK.

  2. under Computer Configuration, expand models of administration and then click System.

  3. in the settings pane, click on disable AutoPlay and then click Properties.

  4. click on active, then on all players in turn it off the AutoPlay box to disable AutoPlay on all drives.

  5. click OK to close the turn off AutoPlay Properties dialog box.

  6. restart the computer.

  Thanks for choosing Patriot Memory.

  The problem I have is I plug in some usb drives and I don't want to open. I want to do all of them open or no. They seem to now open fine, it's not autoplay'ing I want to do.

  Thank you.

  GPEDIT is functional on windows XP Pro, xp family, that it will not work... In addition,

  If the USB functions are a problem, either upgrade the software of the chipset, either install the

  youre MB mfg software (intel, amd, etc.), the "chipset installation utility" has drivers,.

  software & programs of the operating system for its proper use. If you are running XP pro, & have installed chipset

  utility, then the procedure to run GPEDIT will be here: http://social.technet.microsoft.com/Search/en-US?query=GPEDIT&ac=3

• User names found using the command run "control userpasswords2" do not match my user accounts

  Hello, on the #4 computer, when I use the command run, I get a list of 4 users. A, B, C, and comments.
  When I look in Control Panel I see 4 users, A, C, D and comments.
  When I go to C\:Users I see B, C, D and comments.
  I have problems with this computer #4, I get access denied, check the spelling, error code 8007005 0 x.
  All of these accounts should not match in computer #4?

  On my 3 other computers that can network with each other the results of the run command, results of the Panel control and C:\User results all correspond to A, C, D and are same as seen in Control Panel of the computer #4 comments.

  I think that the problem lies in computer #4 and is linked to the user names/accounts do not match. 4 computers user accounts all corresponding in Control Panel, so no problems.

  Don't you think that this problem of networking is related to incompatibility I describe? How can I fix this?   Gift of TIA

  Hello, on the #4 computer, when I use the command run, I get a list of 4 users. A, B, C, and comments.
  When I look in Control Panel I see 4 users, A, C, D and comments.
  When I go to C\:Users I see B, C, D and comments.
  I have problems with this computer #4, I get access denied, check the spelling, error code 8007005 0 x.
  All of these accounts should not match in computer #4?

  On my 3 other computers that can network with each other the results of the run command, results of the Panel control and C:\User results all correspond to A, C, D and are same as seen in Control Panel of the computer #4 comments.

  I think that the problem lies in computer #4 and is linked to the user names/accounts do not match. 4 computers user accounts all corresponding in Control Panel, so no problems.

  Don't you think that this problem of networking is related to incompatibility I describe? How can I fix this?   Gift of TIA

  I finally thought to it. They wore all the user names that came when I ran the command "control userpasswords2". As I said in my original post, user names in all the names of the Panel user control over all matching computers. The only conflict I've had was in the list of user names in the list found when I ran "control userpasswords2". I went to highlight the 'B' account after that I ran the command, you click Properties and changed his name to 'A'. This solved my access denied problem once and for all. Apparently he does not have all of the accounts in the control panel.

  Don

• Does not open the files shared via the command run

  We use a server in our Organization and we can connect to this server using RDP. But when we try to access shared files and folders in this server via the command run in the client by entering the IP address of the server asks it enter network password, and we enter the right username and password (I'm sure that I entered the password and user name correct to 100%) it displays 'failed to connect '. ': unknown username or bad password ". and if we took the same user name and password via RDP it will easily connect without any error. Please give us the solution for this problem.

  Kind regards

  Vijay Kumar C.M.

  Left thread (files, folders, and online storage) for (web and networks).

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums.

  Please post your question in the TechNet forums: http://technet.microsoft.com/en-us/windowsserver/bb250589.aspx

  Thank you.

• Error message: the software can be installed by using the command "run under...". ».

  I have amtrying to load the HP Photosmart D71000 series. Keep is error message: the software can be installed by using the command "run under...". ». Advice suggests logon as a user with administrator privileges. This was done and same message came.  Why?

  Try right click on the setup.exe > run as admin.

  If this does not work, try the Vista Hardware and drivers Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  See you soon.

  Mick Murphy - Microsoft partner

• How to get to "local group policy editor" without typing gpedit.msc in the command run

  I'm so curious to know how to get to "local group policy editor" without typing gpedit.msc in the command run

  I'm so curious to know how to get to "local group policy editor" without typing gpedit.msc in the command run

  You can reach the 'local security policy' of

  Control of configuration\systeme and Security\Administrative tools

• What is the command run for removal of malicous tool?

  What is the command to run the malicous software removal tool?

  If the malicious software removal tool is installed on your machine you can start it by clicking on Start > click run > then type in MRT. EXE and press OK

  Instructions on how to use the tool can be found here: http://www.mydigitallife.info/how-to-use-windows-malicious-software-removal-tool-mrtexe-in-vista-xp-2000-and-2k3/

• Method for the command run repeatedly

  I'm looking for a method periodically run a command in the background process. For example, I want to increment a variable count every 10 seconds. How could I go over to achieve this?

  Starting a background application.  In this launch a clock and schedule it to run as often as you wish.

  Search the forum for more details of running background Applications.

  I would like to start it running as a normal user interface Application until you have sorted subtleties.

  This kind of thing is not negligible for new Blackberry developers, but it pays to look at the API and search the forums.

• That became the symbol of the 'House '? How do you return to your homepage to another site?

  What happened to the 'House' symbol in the toolbar? I have to close firefox and re-open it to get back to my home page. This "SUCKS" the old version has been produced, what is your problem? Bookmarks have no way to organize more. How many more screwed things I find? You need to meet before you offer new versions.

  On the right side next to the search bar is a house shaped button, click here to return to the start page.

• Run the command in Start menu show sites and other files that I opened.

  I was typing letters in the menu run from the start menu ("Start" > "run" > "a, b, c, d, e, f, g, etc...) and I noticed that the Web sites I visited were stored there. This information is accessible by hackers or other intruders unwanted? I was checking to see if I could find my e: drive using the command run from the start menu when I noticed similar entries in the recent documents folder from the start menu. I forgot this shortcut in the past and by chance came across it accidentally. How to delete these lists. I've seen websites that need my e-mail and password. even if she had a lot of jibberish, some words were read by me at a superficial glance. What is a security breach? example: if I type only (a), then all files and websites beginning with a are displayed

  Hi Marc,

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you are facing problems in removing the story from the beginning, run the command. I'll be happy to help you in this problem.

  -What operating system is installed on your computer?

  Windows saves a history of the names of files, programs, and locations that you type in the Run dialog box. You can delete this history, which you can do if you use a public or shared computer.

  I suggest you follow the steps in the link to clear the history run in the start menu and check if it helps.

  Clear history run on the start menu

  http://Windows.Microsoft.com/en-us/Windows7/clear-the-run-history-on-the-start-menu

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Run the command

  When I use the command "run" say - ipconfig - the config appears on the screen, but the window is then immediately closed and I don't get a chance to read the screen. Is there a setting that can change this so that the window / screen stays on until the closing manually. Thank you very much

  Glad to see that you did it :-)

  I'll ask the Japanese forum moderators to close your issue.

  Great job to refine your question, btw!

  Oh, and be sure to "Mark as answer" Jeeped response if you found it useful.

• Please help me. My task manager disappeared, also run the command

  I have automatic updated my computer this morning. After the update, I had to reboot my computer. After the reboot, my task manager disappeared, I received a message that it is disabled by the administrator. The thing is, I am the administrator. I tried to bring it using command run, but he went too. I tried the command run in the properties of the start menu, impossible to find. How can I bring back?

  Another thing, all my word files are now listed as files Visual Basic EDITOR. I guess it's because of virus. I turned off to avoid any automated scripts from script virus running, but then I can't open any word file, so I still allowed him. I can open word file after that, but they are still reported VBEfile. What is VBEfile anyway?

  Another problem, the automated system recovery tab is also missing from my computer properties after the update.

  Please help me, I'm desperate here.

  If you see things like this:

  You do not have sufficient security privileges to restore your system.
  The System Restore tab is missing from the my computer properties.
  System Restore has been disabled by group policy.  To turn on system restore, contact your domain administrator.
  The System Restore tab is available, but the turn off System Restore (disabled by Group Policy) box is grayed out.
  The task manager has been disabled by your system administrator.
  The registry editor has been disabled by your system administrator.
  The task manager has been disabled by group policy.
  The registry editor has been disabled by group policy.
  The command prompt has been disabled by your administrator.  Press a key to continue...
  The operation has been cancelled due to restrictions in effect on this computer.  Please contact your system administrator.
  The "Run" option is missing from the start menu.
  The option "Log off."... ' is missing from the Start Menu.

  The usual advice are something in the sense of "something has been disabled in the group policy...". ", and it is probably true that something has been disabled, but you know what something is and what it takes to do about it.

  If you are using XP Home Edition, you will get away with advice to use the Group Policy Editor, because there is no Group Policy Editor in XP Home and that really doesn't tell you where to look in group policy, even if you run the Group Policy Editor.

  You need a complete solution that works for all versions of XP and requires no hunting around in the Group Policy Editor or registry to find where things are that have been disabled.

  Unless you have disabled these things on purpose, chances are good that your system has a malware infection.  The malware knows what tools you use to try to find and remove, for the malware disables the things you are more likely to consume and prevents them from running if you can't find the malware and remove it.

  If your system has this kind of affliction, all malicious software tools you currently use or have used failed to protect your system so that you can expand your horizons malware detection and prevention to prevent these kinds of afflictions in the first place.

  The malware will be happy you trick into thinking that you need to so something drastic to fix your system - as a facility repair, system restore point or a total reinstallation of XP.  This is what it would be like you, but these measures are not necessary.

  You must solve the immediate problem of the tools does not, then scan your system for malware when you are finished.

  No matter what kind of malware you've used analytical tools, they are unlikely to solve this problem, because they cannot tell if the changes made to your system have been on purpose (you or an administrator who makes them) or some malware changed them, so the analysis tools will let these things alone (it's usually a good thing).

  If your system is afflicted in this way, there are probably other things that also do not work - like the registry editor, System Restore and the command prompt, so fix them all at once even if you have not discovered they are broken again.

  These commands from registry removes the registry entries that are stop opening programs.  Although the registry entries do not exist, these commands are safe to run and will work for all versions of XP.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Open Notepad to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines in bold text in the new Notepad file.

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableRegistryTools" = -.
  [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]
  "DisableCMD" = -.
  [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]
  "DisableTaskMgr" = -.
  [HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
  "DisableCAD" = DWORD: 00000000
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableConfig" = -.
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableSR" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoSetTaskbar" = -.

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  enableit.reg

  After you save the file, close Notepad.

  Locate the file enableit.reg on your desktop and double-click it.

  Alternatively, you can right-click on the enableit.reg file, choose open with... and select the registry editor.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test.

  You can delete the enableit.reg file when you are finished.

  If the registry editor has also been disabled, we first fix (not a problem).

  Because now you have or have had a malware infection, I would follow with this:

  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• Run the command in the comments: dnscmd

  I use the command run in comments to run commands on a host windows below. The account that runs the command has permissions to run these commands.

  cmd.exe /c dnscmd xx.xx.xx.xx hostName1 some.dns.host /recorddelete has xx.xx.xx.xx/f

  cmd.exe /c dnscmd xx.xx.xx.xx /recorddelete some.dns.host hostname1 PTR/f

  (real info IP and host names are hidden to protect the innocent)

  Both run successfully (and should be) run interactively from a CMD prompt, I get the expected result and indicates a nslookup on the hostname '... cannot find < hostname >: field Non-existend' as expected. (img1 attached)

  If run via the command run in the comments, the first command runs (to delete the a record, however, while the second command seems to work, the PTR record is not deleted and nslookup on the hostname returns ' name: < hostname > '(attached img2))

  Thoughts?

  
  

  Here is an excerpt of the object 'command' treatment of an article on my blog: How to run a PERL Script from a vCenter Orchestrator Workflow

  
  // Prepare Command line and parameters to execute:
  
  cmd = scriptName + " " + scriptParams;
  
  System.debug("executing cmd: " + cmd);
  
  // Create and execute the command:
  
  var command = new Command(cmd);
  
  command.execute(true);
  
  // Display command results and output 
  
  var scriptResult = command.result;
  
  System.debug("Script Result: " + scriptResult);
  
  var scriptOutput = command.output;
  
  System.debug("Script Output: " + scriptOutput);
  

  As you can see from the code above, you'll want to look at the results and the exit of the execution of the object of your cmd. I hope that this release will contain some clues as to why your second command fails...

• Can I use command "run as" when running programs in Windows XP by using a limited account

  Original title: I wonder y at - it means to

  is there way to do (run as) window appears automatically by clicking on the program while you are on a limited XP account

  Hi mohammadnagdy,
   
  I'm afraid to inform you that this option could not be activated with the standard user account.
   
  You must log on to an administrator account to perform this question.
   
  How do I activate and use the command "run as" when running programs in Windows

• Try to install a program that requires to be run as an administrator.

  I think that I am the administrator and it still does not work.  How to recognize me as an administrator. I have only one account and it says administrator under him. I tried the command run as when I click on the .exe file that I downloaded.

  Forgive me of repitition.
  You said you tried...

  A click with the right button on the exe > clicked run as administrator > and then right click on the exe again, and he ran?