that copy a file nameto

Similar Questions

• Windows XP Professional Setup copy iaStor.sys then the OS says that it cannot copy the file iaStor.sys.

  After the RAID 0 disk partitioning, installing Windows says it will copy the files in the file system. The first file is iaStor.sys. My SATA CD drive runs for a few seconds, then there is a long pause, then the OS says that it cannot copy the file iaStor.sys. He goes on to say that I should check that there is a CD in the drive. Any ideas?

  Here's the solution to this problem:

  1. in the disk driver (a:\) root directory create a directory called holiday of $ $OEM existing files as they are, we will not delete or replace anything.

  2. in the directory $ $OEM you have created, create another directory called TEXTMODE

  3. copy all the driver files located in the root directory to the A:\$OEM$\TEXTMODE subdirectory, try to reinstall, it should now work.

• When I copy the files to another drive I lose sight that I put in place

  I have a folder of music with MP3s set up for show, track, year, artist, Album name, duration, and then sorted by Album title and show in groups.

  When I try to copy these files to a different drive (such as a backup copy), they lose that point of view I have Setup and it wou; d take me a long toime to reset the points of view for all folders is not good.

  Hello

  When copy you it to another drive, it will take the default order of windows.

  For reference:

  http://support.Microsoft.com/kb/306554

  http://support.Microsoft.com/kb/812003

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

• Is it possible to create a folder that can hide files automatically, when they are copied in it?

  Hello!!!

  Is it possible to create a folder that can hide files automatically, when they are copied in it? I mean how to program a folder so that everything that he would automatically become hidden? I would be very grateful...

  Is it possible to create a folder that can hide files automatically, when they are copied in it?

  Yes. A sort of roundabout.

  For this example, create a folder on your C drive named HideTest.

  Download http://winsupport.org/utilities/freedos-choice.html Choice.Exe (click on the link to download the utility program near the bottom of the page. "And save it in the C:\HideTest folder).

  Open Notepad and then copy and paste the following text in it:

  Off @Echo

  : All
  Set FilesToHide = No.

  : GoToDir
  C:
  cd\HideTest

  : Top
  CLS
  IF FilesToHide %! Is Yes! Attrib *. * + H

  : Choice
  Choice.Exe /c:YN t:Y, 30 are looking for files to hide
  If ErrorLevel 2 Goto: exit

  : MakeList
  Dir > TempList.Txt

  : CheckFiles
  Set FilesToHide = No.
  Find.Exe "0 file (s)' TempList.Txt
  If ErrorLevel 1 Set FilesToHide = Yes
  If exist TempList.Txt Del TempList.Txt

  : Loop
  Goto: Top

  : Output
  Set FilesToHide =
  If exist TempList.Txt Del TempList.Txt
  Output

  Click on file, then save under...

  Go to C:\HideTest

  Name the file Hide.Bat

  Click Save

  Close Notepad

  Open Windows Explorer

  Go to C:\Documents and Settings\UserName\Start where user_name is your own username.

  In the right pane, right click, select New, and then click shortcut.

  Click Browse, and then navigate to C:\HideTest and click on Hide.Bat, click Next.

  Type a new name or accept the default name and click Finish.

  Right-click on the newly created shortcut, and click Properties.

  Change the race: from the normal window to reduced.

  Click on apply, and then click Ok.

  Restart your computer.

  Note: In the line above Choice.Exe c:YN t:Y, 30 are looking for files to hide, 30 is the number of seconds it will wait before checking the new files. This can be from 1 to 99.

  Edit: Just to satisfy my curiosity, why do you do this?

• When I try to copy files to a CD, I get message "Windows has a problem to copy this file to a CD." How to fix? I get the same message that I click on "Copy to CD" or drag the file to copy to the CD player.

  When I try to copy files to a CD, I get the message "Windows has encountered a problem when trying to copy this file."  I press the button "Retry" without any result.  I get the same message that I have click on 'Copy' files on a CD or drag the files to copy to the CD player.  I was able to copy these same files to a CD a few days ago.  Thanks for the suggestions.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  1. don't you get an error code along with this error message?
  2. what CD burning software is installed on your computer?
  3. what kind of CD do you use to burn?
  4. What is the status of the CD - DVD drive in Device Manager?

  Method 1.
  Let us first check the status of the optical drive in the Device Manager. Check if there is no error code or yellow mark is listed.
  Reference:
  Explanation of error codes generated by Device Manager in Windows XP Professional
  http://support.Microsoft.com/kb/310123

  Method 2.
  If the problem is to start the computer in a clean boot state and check if you are able to accomplish this task.
  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• can someone help me! I have a P4 with service pack 2 Professional windows installed in it, my problem is that I am unable to copy all files or other animals. a dialog box appears indicating the integrity of violeted files

  Ideas:

  • Programs you arecan someone help me! I have a P4 with service pack 2 Professional windows installed in it, my problem is that I am unable to copy all files or other animals. a dialog box appears indicating the integrity of files violeted the problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  bastyav,
  We use the exact and some error message in more detail on the issue.  This problem occurs with any file on the disk or only some of them?  You are logged as administrator?  Has anything changed recently (hardware or software)?

  The first thing I would say to run a Virus scan and malware.  If you do not have an antivirus program, then you can get one here: http://www.microsoft.com/Security_essentials/

  If there are no problems found then not try the following steps:
  Run the following commands.

  Chkdsk /r

  http://support.Microsoft.com/kb/315265

  sfc/scannow

  http://support.Microsoft.com/kb/310747

  Let us know the results and the information requested.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Delay of the dialog 'Copy the file' when you drag a file to a folder that already contains.

  Delay of the dialog 'Copy the file' when you drag a file to a folder that already contains.  The dialog box only appears when that I disconnect.  In fact this problem can seriously mislead the user. The file has been copied to or not? This is a serious shortcoming of the operating system.
  A similarly delayed dialog box is to join files on a send to the recipient of the message.

  What is the cause of the delay? Dialog boxes are not under other windows - they break on screen as I log out.

  When I drag AGAIN the same file in the same folder, then I get a message that "the action cannot be completed because the file is open in another program.  (No doubt the program who was trying to copy in the first attempt and waits for a response to the dialog box may not show me!)

  Hardware: Computer laptop Asus M70.  VISTA Ultimate with the latest patches.

  Lorien, thanks for your response.
  A lot of time and effort was exercised in an attempt to find out WHY. I wanted to not just fix the symptoms. It concerned me greatly as a basic function of the operating system does not work. He was not fit for purpose. In the end I found that a third-party application compromised of WINDOWS VISTA 32-bit operating system. If an operating system can not reliably inform the user that an operation is successful or not, it is worthless. In the case above, I didn't move the files was a success (no response required) or the delayed response until I signed.

  In addition to the original problem, there was the following problem: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/24068518-31e0-4b23-823b-d54882792301 where "send to..." 'Recipient' disable the context menu in Explorer for JPG does not or not broken.

  Finally, I figured out the following error had something to do with my problems:

  Description:
  The server {AB8902B4-09CA-4BB6-B78D-A8F59079A8D5} is not registered with DCOM within the required time.
  

  -

  -

   

   10010

   0

   2

   0

   0

   0 x 80000000000000

   

   198817

   

   

   System

   ASUS_M70VM

   

   

  -

   {AB8902B4-09CA-4BB6-B78D-A8F59079A8D5}

   

   

  Arriving in my solution, I was inspired by the following articles http://blogs.technet.com/markrussinovich/archive/2006/08/31/453100.aspx     http://blogs.technet.com/markrussinovich/archive/2006/11/27/532465.aspx
  So I downloaded the MS debug tools and confirmed my suspicion of dllhost.dll using REGEDIT to set debugging on that.
  To cut a long story short, it's DivX 7.2 which caused me grief.  In particular, the file DivXDecH264.ax 'has an access violation - code C0000005 (first chance).  It has been autonomous in DivX Plus DirectShow Filters.     Thus, when it has been deleted (starting other Articles to original install DivX) through Control Panel of configuration/programs and features my system worked perfectly well.

  I know SFA on the architecture of Windows but why was this DivX file loading and cause an access violation whenever I used the windows Explorer?  How an operating system may fail in a basic function of by a third party issue?  There are some newspaper where this access violation was recorded?  It was only possible to identify it in debugging?

  What you fella?

• Is there a program that allows you to copy music files titiles without actually transferring the music itself?

  I have several GB of music stored on my computer. I want to compile a list of this music.  I know that I can type the information into word or excel documents but y at - it a proggram that is available that would allow me to copy the information already on the computer to compile the list is my music. I tried to copy the titles but al does is copy the music together. (example: song title: puppet man artist: Tom Jones.) If I tried to copy the information to a file for which it is stored, it would actually copy the file and not only the tiitle. Any suggestions?

  Hello

  You may need to find a program online. Use your favorite search engine to search for a program.

• When I try to burn a music disc player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source

  I have computer aGateway running Vista Home Edition and something happened with WIndows Media Player.   I have the DVD/RW internal drive and external DVD/RW as a player.  I use them mainly to copy music files and it has always worked fine until yesterday.

  When I try to burn a music disc, the player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source (such as the CD or car drive).  Worked fine Saturday and had burned discs Saturday night recognizes the two drives as data drives.

  Is it something that needs to be reset or changed?

  In WMP, please click the button burn up and make sure that the Audio CD is selected. Then try burning the CD again, they now play on a standalone CD player too.

• trying to copy a file that had been opened on another computer and get "invalid MS-DOS function".

  With a flash drive, I took a document to another computer with a version of Excel, I had never seen.  I then brought the document to my own computer, opened it and was missing the lines and columns headers.  I also tried to copy the file to my CD - RW and the message "invalid MS-DOS function".

  I think that you had better know what was the Excel program. and say to the people in the Forums of Excel when you repost here...

  Excel:

   

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861099.aspx

  Forums help Excel at the link above

  They will help you with your questions Excel when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.

  You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.  They will have to copy the files in the folder to make changes and then copy a review of back in.  Locally and on the network

  Hello

  1. In Windows Explorer, right-click the file or folder you want to work with.

  2. In the context menu, select properties and then in the Properties dialog box, click the Security tab.

  3. In the name list box, select the user, contact, computer, or group to which you want to display permissions. If the permissions are grayed out, this means that the permissions are inherited from a parent object.

  https://msdn.Microsoft.com/en-us/library/bb727008.aspx?f=255&MSPPError=-2147217396

• does that mean "you need to provide administrator permission to copy this file".

  I'm moving my D drive an exe file to the root of my C drive, and what I get is "That you will need to provide permission administrator to copy this file"does that mean? I check the file by right click on the file and clicking on properties and permission checking. the permissions are good. what I have to do. I am using windows 7 Home premium 64-bit.
  

  Hello

  If you are logged on as administrator?

  I suggest you give permission to folders and files and check if the problem persists:

  a. right click on the file or folder for which you want to set permissions, click Propertiesand then click the Security tab.

  b. click Advanced to open the Advanced security settings for dialog box.

  c. click on the owner tab, click Edit. If you are prompted for an administrator password or a confirmation, type your password or click continue.

  d. in the new Advanced security settings for the change in ownership ofbox: field, select your user name and verify the replace the owner of sub containers and objects. Click OK, repeat for the other boxes. (If your username is not click other users or groups to add your account).

  For your reference, follow the steps described in the following links:

  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

• I said that I need the permission of the administrator (I am the administrator) to copy a file to one external hard drive to another.

  I said that I need the permission of the administrator (I am the administrator) to copy a file to one external hard drive to another. I used the same computer and peripheral for the past two years with no problems until today when I opened upward after being away on vacation. I use Windows 7. I'd appreciate any help out there.

  BHA

  Original title: the administrator permission

  How to open a file if I get an access denied message?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-open-a-file-if-i-get-an-access-denied-message

  Troubleshoot "access denied" when opening files or folders [good for Win7, too]

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Windows 7: access denied - WHY?

  http://www.SevenForums.com/general-discussion/19745-access-denied-why.html

• I just copy a file by ctrl + c then I'll stick with ctrl + v, that after I copy the file (b) by ctrl + c and paste ctrl + v and once again if I need to paste everything first: to leave what shortcut I use

  I just copy a file by ctrl + c then I'll stick with ctrl + v, that after I copy the file (b) by ctrl + c and paste ctrl + v and still, if I need to paste everything first: to leave what short cut I have we

  On Mon, 24 Sep 2012 15:49:08 + 0000, ajay8055 wrote:

  I just copy a file by ctrl + c then I'll stick with ctrl + v, that after I copy the file (b) by ctrl + c and paste ctrl + v and still, if I need to paste everything first: to leave what short cut I have we

  You can't do it without third-party software. Just go back and
  Copy the file (a).
  Ken Blake, Microsoft MVP

• I can't import pictures from a card file or anything like that.  I get "could not copy a file at the location requested.  It's never happened before.

  I can't import pictures from a card file or anything like that.  I get "could not copy a file at the location requested.  I've never had this happen before.  I use a MacBook Pro

  well, I understood my question, maybe the same thing for you...    The catalogue was somehow the problem, I created a new catalog and everything works well again.  I assumed that the catalog has been damaged during the import failed because the network connection.   hope that helps