that means (role: answering machine and role: initiator)?
Dear all,
I have a few questions about ASA 5500 error?
a few times I saw the role: answering machine and a few times I've seen role: initiator
what it means?
and what is the problem?
HQ # sh crypto isakmp his
HIS active: 3
Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
Total SA IKE: 3
1 peer IKE: 10.189.137.8
Type: L2L role: answering machine
Generate a new key: no State: MM_ACTIVE
2 IKE peers: 10.189.137.10
Type: L2L role: initiator
Generate a new key: no State: MM_ACTIVE
3 peer IKE: 10.189.137.9
Type: L2L role: initiator
Generate a new key: no State: MM_ACTIVE
AC #.
Answering machine means that the peer has initiated the VPN while initiator connection means that the VPN tunnel is started from this end.
Hope that answers your question.
Tags: Cisco Security
Similar Questions
-
I change my current 2 lines phone/fax with answering machine setup and router DSL to a single line. I have the right instructions HP and all the necessary parts and wiring diagrams, but I can't determine which of the now used phone cords is 'special' one provided in the box with your printer. Instructions for the installation of a line saying I should use this cord between the DSL filter and the 1-line port on the printer for reliable fax.
How can I identify this original HP cord? And, in case I can't, what makes it "special"?
Hi @Atlantico,
Thanks for joining the Forums of HP Support with your request.
I understand that you change the way that your fax is installed on your HP Officejet Pro 6835 e-all-in-one printer and you want to be able to identify the phone cord supplied with the printer. I would like to help.
Usually the phone cord supplied with the printer is black and a 2-wire telephone cord. There are basically 2 types of telephone cords, 2-wire or 4-wire. cords 2 telephone wires are the most basic phone cords and because the fax was built around the analog telephone systems, this is the type of cord they suggest to use.
You can identify a phone cord of 2 sons looking at the end of the connector that you plug into the phone jack. Please see the attached diagram below.
Please let me know if that solves the problem, or if you need assistance. -
You want to have an answering machine and Fax machine all work?
Many times people have trouble with reception of faxes while responding to the stand at the same time.
I have a resolution for you with this problem.
Check your strings and make sure that everything is connected properly.
1. on the back of the printer, LINE 1 should go directly into the WALL SOCKET. (If you have a modem, with the phone line tied up in. Plug it into the LINE 1 of this modem.
2 LINE 2 at the rear of the printer will be obtained directly on the answering machine. (Most phones have an answering machine in one. You can find some separate answering of phone). You always connect LINE 2 on the printer on the answering machine.
So if you have any problems between the two, there are ways around it so that you can receive faxes, phone calls and messages at the same time.
I hope this helps out.
-
That means "assumed answered?
Hello
Please, does that mean if a thread is supposed to respond? Starting from the principle that a thread is responded and why I can't delete this indicator (or if it's possible, please how) if I don't agree with this assumption?
To be more precise... I created this thread
Problem point encoding of BLOB (probably a bug, pls, someone from the dev team could check the)?
and it is marked as alleged said despite the fact that it looks like a possible bug by their SUMMIT.
Thank you
Pavel
Problem solved. He just needs to score (all) correct answer and then to deselect them.
Thanks a lot for your help.
Pavel
-
The Safari icon has an exclamation mark that covers. What does that mean? How can I get rid of him?
I closed my Mac and restarted but it's still there. Help please.
Susan,
Remove Safari from the dock icon. Then, go to your Applications folder and launch Safari from this location.
-
I have a lot of programs I want to uninstall and I have installed initially. I have full access to these programs. However whenever I try to delete them, I was invited with the message "access denied." Now my C drive is almost full and I just want to send unwanted expansion of road programs and remove those that I don't need. Why I can't get rid of them?
See if this helps:-
If she please vote as helpful.
Thank you.
-
That means 'Attempt limit exceeded' and how to I remedy?
I'm trying to synchronize Firefox between my iPhone and my Windows computer. I can connect successfully to my computer at first, then I make a confusion with passwords and 'Attempt limit exceeded' appears now on phone and computer. I have delete my account everything and start over?
I did some research on the web, and that the error can be based on your IP address. You share your connection with anyone?
-
that means the data errorcyclicredunancycheck and u can fix it
can im trying to install sims continues drive to stop so that the download and errorcyclicredunancycheck guard poppimg upward please someone help me
Cyclic redundancy check (CRC) is a checksum contained in each sector of disk to validate the contents of this sector. When you see these errors, it is an indication that you have a bad spot on your drive. It is unclear if this bad place is on the source (disc?) drive or your hard drive. When you see this error, it is a good idea to perform a check disk (chkdsk) to ensure the integrity of your drive. On your hard disk, you must specify the option "analyze and recover" so that the problem can be repaired. On a CD/DVD, you must make a control read-only as it is usually read-only media.
«Check your hard drive to find errors in Windows 7»
<>http://support.Microsoft.com/kb/2641432 >
On your hard disk, verification will be made at the next reboot, shall not be interrupted, and can take hours to fill then do it when you don't need your computer for awhile.
HTH,
JW
-
I am trying to download this on a Mac CS5 upgrade and get this message when you click on install. Any ideas how to get around this problem?
CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan
-which means you are trying to use CS6 and earlier at YOUR risk of having problems
-You can get CS6 and previous programs to install and run, or you can not (some do, some don't)
-Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help
Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)
-also a TEMPORARY security change https://forums.adobe.com/thread/2039319
-the guardian https://support.apple.com/en-au/HT202491
-
I recently set up my fax feature and now I cannot answer my phone and cannot get messages on my answering machine. I'd be ok just to cancel the fax feature that I use really, but do not know how to do this.
I really need to get messages more faxes. Any help is greatly appreciated!
Charles, thanks again for your help. I have reset my answering machine and now everything works!
I am so happy!!
Thanks again
-
Xperia vs provider voice mail answering machine
Hi all
I understand that no signal the auto responder Xperia will not work, but is it possible that when you don't have your email automatically provider signal will take over?
Also, how people found the xperia answering machine, preferable to the voicemail provider?
Thanks for all the answers.
Jack
Jack2016 wrote:
Hi all
I understand that no signal the auto responder Xperia will not work, but is it possible that when you don't have your email automatically provider signal will take over?
Also, how people found the xperia answering machine, preferable to the voicemail provider?
Thanks for all the answers.
Jack
Hi Jack,
I assumed you're impatient for the voicemail provider take care if the phone does not have signal to accept incoming calls, and that's why you need the supplier to get the job done for the record. (Hope I've understood)
If this is the case the answering machine should always be active or subscribe to voice mail from the provider. While it will alarm if your phone is out of coverage or signal.
If you don't want the call to voicemail while hone is on the cover or within the range of the signal so that he could go on your answering machine on the phone, I think you could tweek simply time to how dry or rings for this trigger for recording?
For the preferences of answering machine and voicemail. I think that this may differ or vary by country. Some charged extra service provider be activate this service and some countries is as a monthly fabric which will include them on your monthly bill.
Ofcause, if the service is free, so why not? I would like that they on anytime if I can, so that I would not have missed something important to all calls. Hope this will help a little.
-
problem of answering machine after update from z3 to lollipop
I've updated my double z3 to 5 android, but now I can not save the message for answering machine and said unfortunately, phone has collapsed. If one facing problem like me? Can someone help me to solve it.
Try the settings-applications-all-phone, force stop and erase the data. Turn it back on.
-
How can I activate my Webcam USB between my physical machine and VM
I am new and with a stupid newbie question. VMware Workstation 11 is able to detect and use my Webcam on my virtual machine of Ubuntu 14.4, also a long time I disconnects the USB camera after that starts the virtual machine and reconnect again to VMware he catches before my (windows 8.1) physical machine fact.
Is there anyway I could turn off the camera on windows manually to my vm it catches and turn it back to the when I'm done with the virtual machine. I don't have to work on the PC and reconnect everything all the time. Hope it makes sense. Thank you!
You can use the menu Workstation VM-> removable devices -
to connect to the virtual machine or to connect to the host. If you connect the device to the virtual computer, it is disconnected from the host. After completing your work with the virtual machine, you can disconnect from comments and connect it to the host. -
Error code: U44M1I200. What does that mean?
I have the error Code: U44M1I200 when you try to update the various Adobe programs. The programs could not be updated. What does that mean?
> Download and install the latest version of Adobe Application Manager from the link below:
Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
> Try to install the update now and check.
> If the error persists, rename the folder in OOBE OLD OOBE of
Mac: MAC HD/Library/Application Support/Adobe
Win: C:\Program Files (x 86) \Common Files\Adobe\
> Reinstall AAM and try to run.
-
problems with SPA112 and answering machine
Recently installed a SPA112 unit, which until this works fine without any problems, but have a few minor issues. Among others, I can't the 2 sec machine records messages; When there is an incoming call the answering machine picks up the call of the appellant Gets a busy; which means that the appellant is not able to hear the outgoing message, nor able to save?
Worth mentioning that I have before that used a vDSL Thomson 78 modem x who offered two pots the same equitment I use was connected to and also the autoresponder has worked with. Then nothng has changed with the Setup program expect that the SPA112 has replaced the modem ADSL Thomson when it comes to managing the voip part.
One suggestion I've seen is to change the 'delay to reorganize' at 15, which until now did not make a difference. In addition, the waveform of the ring has the sine value and the default value of the voltage.
Open to suggestion to point me in the right direction what to look for in the config for the SPA112.
Format text in time with no seconds and encoding UCS-16 can be ignored. But the messages are truncated at the first ',' and the rest is missing. Second file is the SQLite database...
You are to test my ability do identify and treat the data hidden, isn't she?
Well, I decided to extract the lines of SQLite database as TXT form is incomplete. I don't know any format if column Tm, fortunately, we have no absolute time and I wish I have guessed correct relative time in seconds.
So result (inline comments):
Incoming calls:
002.13 > CC_eventProc(), the event: CC_EV_SIG_CALL_ARRIVED (0 x 31), cover: 0, rating: 0, par2: 0 x 40956900
002.16 > NEW_CALL_STATE(), dial 0: former State = CC_CST_IDLE, new State CC_CST_RINGING
002.16: CID:CID_initGen() [0] > won 0 delay 1200 phone abcdefg786 name 46bcdefg786
002.23: CID:OnHookTx PolRevTransmission of Caller ID:
002.33 > uchSendDTMF(), sending 12 DTMF to line 0
002.33: [0] beginning of the DTMF/FSK CID, CID_ST_ACTIVE
002.48 > uchSendDTMF(), sending of DTMF a on line 0
002.64 > uchSendDTMF(), sending of DTMF b on line 0
002.80 > uchSendDTMF(), sending of DTMF c line 0
002.96 > uchSendDTMF(), sending of DTMF d to line 0
003.13 > uchSendDTMF(), sending e DTMF on line 0
003.29 > uchSendDTMF(), sending of DTMF f at line 0
003.45 > uchSendDTMF(), sending of DTMF g on line 0
003.61 > uchSendDTMF(), sending 7 DTMF to line 0
003.77 > uchSendDTMF(), sending of DTMF 8 to line 0
003.93 > uchSendDTMF(), sending 6 DTMF to line 0
004.08 > uchSendDTMF(), sending of DTMF 14 on line 0
004.25: [0] CID CID: FACTSix rings:
004.52: CID:Ring now
004.54 > SLIC_startRing State 0 ts 0x1aa4ccon 1000 off 5000 len 60000
004.54 > pol [0] of the event on the cad of ring 0 0
009.33 > pol [0] of the event on the cad of ring 0 0
014.12 > pol [0] of the event on the cad of ring 0 0
018.92 > pol [0] of the event on the cad of ring 0 0
023.73 > pol [0] of the event on the cad of ring 0 0
028.52 > pol [0] of the event on the cad of ring 0 0Hook:
029,50 > off hook [0]
029.51 > NEW_CALL_STATE(), dial 0: former State = CC_CST_RINGING, new State CC_CST_ANSWERINGFully connected call:
029.57 > NEW_CALL_STATE(), dial 0: former State = CC_CST_ANSWERING, new State CC_CST_CONNECTED
Disconnected from the remote side:
039.62 > SIP_sessDlgEventProc: event: 45 (SIP_EV_DLG_BYED), ucState: 3
039.62 > NEW_CALL_STATE(), dial 0: former State = CC_CST_CONNECTED, new State CC_CST_INVALIDThe CPC sent to the device called:
047.64 > CPC SLIC_SET_OPEN_STATE on line 0
048.05 > CPC go to line 0 in CC_CST_IDLE
048.05 > NEW_CALL_STATE(), dial 0: former State = CC_CST_INVALID, new State CC_CST_IDLECalled device still picked up, assuming that the new (outgoing) call:
048.07 > cepIdleProc (lid = 0, call = 0x17a974, event = 9 (CC_EV_USR_SEIZURE), by = 0, par2 = (Nile))
048.07 > NEW_CALL_STATE(), dial 0: former State = CC_CST_IDLE, new State CC_CST_DIALINGCalled device hung up the phone, call the cleaning:
048.72 > hook on [0]
048.73 > NEW_CALL_STATE(), dial 0: former State = CC_CST_DIALING, new State CC_CST_IDLECamera won, outgoing call starts, digit collection:
060.05 > [0] off Hook
060.06 > cepIdleProc (lid = 0, call = 0x17a974, event = 9 (CC_EV_USR_SEIZURE), by = 0, par2 = (Nile))
060.07 > NEW_CALL_STATE(), dial 0: former State = CC_CST_IDLE, new State CC_CST_DIALING
065.20 > SIP_sessDlgEventProc: event: 41 (SIP_EV_DLG_TERM), ucState: 4Device on the hook even once, no figures were received in this cycle:
066.01 > hook on [0]
066.01 > NEW_CALL_STATE(), dial 0: former State = CC_CST_DIALING, new State CC_CST_IDLECamera won, outgoing call starts, digit collection:
079.17 > [0] off Hook
079.19 > NEW_CALL_STATE(), dial 0: former State = CC_CST_IDLE, new State CC_CST_DIALING
081.68 > line: 0 figure DTMFON event has received a
081.81 > line: 0 DTMFON received the event figure b
081.94 > line: 0 DTMFON received the event number c
082.07 > line: 0 DTMFON received the event sales
082.20 > line: 0 DTMFON received the event e figure
082.36 > line: 0 DTMFON received the event number f
082.49 > line: 0 DTMFON received the event figure g
082.62 > line: 0 sales event received DTMFON 7
082.76 > line: 0 sales event received DTMFON 8
082.89 > line: 0 sales event received DTMFON 6
090.96 > cepDialingProc(), the event = 33 (CC_EV_TMR_DIALPLAN)Figures gathered (numbering commited by dial plan timeout):
090.96 > NEW_CALL_STATE(), dial 0: former State = CC_CST_DIALING, new State CC_CST_CALLING
090.97: call:[email protected] / * /: 0, rc = 0
091.47 > NEW_CALL_STATE(), dial 0: former State = CC_CST_CALLING, new State CC_CST_PROCEEDINGREGISTRY procedure was shot and completed during call setup:
097.66 > RegOK [0]. NextReg in 296 (1)
Fully connected call:
099.05 > NEW_CALL_STATE(), dial 0: former State = CC_CST_PROCEEDING, new State CC_CST_CONNECTED
Disconnected from the remote side:
103.75 > SIP_sessDlgEventProc: event: 45 (SIP_EV_DLG_BYED), ucState: 3
103.76 > NEW_CALL_STATE(), dial 0: former State = CC_CST_CONNECTED, new State CC_CST_INVALIDThe CPC sent to the peripheral component:
103.76 > statr CPC CC_EV_TMR_INVALID timer
111,76 > CPC SLIC_SET_OPEN_STATE on line 0
112.19 > CPC go to line 0 in CC_CST_IDLE
112.19 > NEW_CALL_STATE(), dial 0: former State = CC_CST_INVALID, new State CC_CST_IDLEThe device still picked up, assuming that the new (outgoing) call:
112,22 > NEW_CALL_STATE(), dial 0: former State = CC_CST_IDLE, new State CC_CST_DIALING
Flash hook events occurred. Dial 0 (data collectors) cancelled. New call (1)
created, collection figures:112,37 > flash hook [0]
112,37 > CC_eventProc(), the event: CC_EV_USR_HOOKFLASH (0x3), cover: 0, rating: 0, par2: (none)
112,37 > NEW_CALL_STATE(), dial 0: former State = CC_CST_DIALING, new State CC_CST_IDLE
112.43 > NEW_CALL_STATE(), call 1: former State = CC_CST_IDLE, new State CC_CST_DIALINGNo number with shot composition timeout:
136.34 > NEW_CALL_STATE(), call 1: former State = CC_CST_DIALING, new State CC_CST_INVALID
Line is still the hook at the end of the journal.
Well. So we have commented on the newspaper. Now - what is your question?
Note that the CPC Signal (control Signal party call) is a momentary drop in voltage (0 volts DC) on the line for a period of time. It is the way in which the side 'server' of analog line (SPA112 here) informs device calling (your machine here) that the call has been disconnected by side called. Cisco is also using the CPCS to report the same he remote disconnect the case of incoming calls despite CPC does not has been provided for this direction of call.
Not all phones can recognize the signal of the CPC, especially when called. SPA112 must be configured according to the particular phone's capabilities.
Maybe you are looking for
-
How to remove the sound notification of opening and closing foxfire
Whenever I open or closed foxfire 36.0.4 I hear a gong, would like to turn off.
-
cannot send pictures of photos since update app at el Capitan
Take lots of pictures. Since the update to El Capitan (10.11.3) a few weeks ago, I'm more able to email or send photos of family and friends of my Photos App (not had this problem before the update). I have no problem with e-mail, etc., but can no lo
-
an indexer research works not properly professional xp
No problem until 2 days ago (think Windows made a few updates) now as soon as I connect it starts windows saying the search indexer is not working properly - everything that you press a from now he keeps of bobbing upward and you literally can't do a
-
USB does not recognize the Garmin unit. Error "unknown device".
Recently, addition of windows 7 Home premium stopped detecting my garmin unit. Other USB devices such as my ipod work very well. I was able to detect the Garmin only a few times, he would try to install the drivers, but the drivers would not install.
-
Radeon hd4670 is not compatible with windows 8
I just upgraded to Windows 8 and I have a few problems with my video card. The video and all of its settings work well. The problem is with the audio. It only allows me to use 2 speakers. I have my HDMI hooked to my home theater receiver and need