THE 10 Bluetooth enumerator error

Similar Questions

• my bluetooth using engineering update driver then the MS bluetooth enumerator disappears DEV Manager, what has gone wrong?

  Blue tooth installed on the motherboard.

  Hello

  as allowing you to change the software of bluetooth 3rd party software I suggest you contact their Support

  or try this

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  ________________________________________________________________________

  Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  _______________________________________________________________________

  also run the sfc/scannow command if necessary

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  _________________________________________________________________________________

  and read this:

  read these tutorials on how to set up bluetooth

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Here are solutions to some common problems with Bluetooth devices.

  You can also try a convenience store for diagnose and fix common problems with equipment and devices running.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  If the above does not correct it contact the hardware manufacturer

• WIndows 8 not recognized Microsoft Bluetooth enumerator

  I have a Lenovo Y510P and have the Microsoft Bluetooth Enumerator settled and says it's working properly according to my bluetooth. When I go to add my bluetooth mouse will not display even my mouse as a possibility of connection and said that my laptop needs troubleshooting because it lacks the driver Microsoft Bluetooth Enumerator. I tried the troubleshooting, and it comes up saying that the issue was not fixed.

  Hello

  Please contact Microsoft Community.

  This issue may be caused if the drivers are missing Bluetooth device you are trying to connect.

  To better help you, could you please confirm a number of things like:

  1. What were the changes made to the system prior to this issue?
  2. Do you have an error message while trying to connect Bluetooth?
  3. What is the brand and model of the device that are trying to access using Bluetooth?

  I suggest you follow the steps below and check if it helps.

  Method 1: Try the procedure described in the following Microsoft Help article and check.

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Method 2: you need to check if the Bluetooth Support service is activated or not, follow the steps below:

  1. Press Windows + R keys and choose RUN.
  2. Type services.msc in the box RUN
  3. Bluetooth support service search
  4. Double-click it and check the status
  5. If the service is not started
  6. Start the service.

  Method 3: You need to update the drivers from Windows Update, follow the link below:

  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help.

• I need MS Bluetooth Enumerator to give window 7 32 bit.please the link for the download.

  I need MS Bluetooth Enumerator to give window 7 32 bit.please the link for the download.

  Hi Nicolas,

  Thanks for posting your question in the Microsoft Community forums.

  The description of the problem, I see you want to install the Bluetooth on Windows 7 enumerator.

  Provide us with a few details in order to better understand the issue.

  1. What is the number of brand and model of the computer?

  2. what exactly is the problem you are having with the Bluetooth device?

  3. do you receive any error messages?

  Note:
  Microsoft Bluetooth Enumerator comes into play when you connect the Bluetooth device unless the coach in which Windows 7 automatically installs the driver.

  After that Windows detects the Bluetooth device, it is controlled by Microsoft Bluetooth Enumerator and not the third-party driver.

  Here's a way to install the Bluetooth driver released by the manufacturer to resolve the problem. I suggest trying the steps and check if that helps.

  Method 1:

  I suggest you to rename the %WINDIR%\inf\Bth.inf to Bth.bak before you install or reinstall the battery or third device.

  To rename the file, follow these steps:

  (a) click Start, click run, type %windir%\inf in the Open box, and then click OK.

  (b) right-click Bth.infand then click Rename.

  (c) Rename Bth.inf to Bth.bak, and then press ENTER.

  Method 2:

  Download and install the latest version of the driver Bluetooth of the manufacturer's Web site.

  Method 3:
  If the problem persists, I suggest you to update your Bluetooth driver on the manufacturer's Web site.

  (a) click Start, typedevmgmt.msc in the Open box and then press on Enter.

  (b) locate the device.

  (c) right click the device and then click on Update driver.

  (d) follow the steps that appear on the screen in the Hardware Update Wizard to specify your own driver for the Bluetooth device.

  Reference: Updating a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Let us know the status of the issue after you perform the troubleshooting steps. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• Bluetooth connection error when you connect the phone to computer

  Original title: Bluetooth connection

  My phone shows upward in devices but when I click on connect is not - it says connection error?

  Hello

  1. what operating system is installed on the computer?

  2. What is the serial number and model of the phone?

  3. were there any changes (hardware or software) to the computer before the show?

  4. What is the accurate and complete error message you get?

  Perform operations by the items listed below, if you have Windows XP, Vista or Windows 7 is installed on your computer and see if the problem occurs.

  http://support.Microsoft.com/kb/883258

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Hope this information helps.

• Microsoft Bluetooth Enumerator attempts to install bad devices Bluetooth for CSR8510 A10

  This question applies to all the Bluetooth adapters that are based on the chipset CSR8510 A10 (for example Sitecom CN-524).

  On different machines, I'll have a different behavior as a result of the installation of the drivers for this adapter. For example, a laptop Lenovo X 240 will install fine and a Lenovo T430s will NOT install fine. The two machines are running Windows7 64 bit.

  It is not an option to install the drivers that came with the dongle, because they are based on the suite of harmony of CSR, which prevents battery Microsoft Bluetooth to use. That is what I want, and it has been shown to work.

  When you connect the adapter, Windows will try to install a generic Bluetooth Radio driver, which is fine.

  I was able to isolate the problem to the driver Microsoft Bluetooth Enumerator is also automatically installed:

  -On the machine that fails to install correctly, this driver will attempt to install 3 devices (NICs): one for the hands-free Bluetooth Audio, one for Bluetooth L2CAP Interface and one for Bluetooth Remote Control. These drivers do not start (error code 10), who should expect that these drivers are not attempted to be installed on the computer that works very well.

  -On the machine that the adapter is installed correctly, these devices do not appear. Instead, the pilots appear to Bluetooth Audio and Bluetooth Server.

  I struggle to understand why there is a difference in behavior between the two computers and I would appreciate some tips that will help me to make the failed computer try NOT to install these faulty drivers!

  Thank you!

  For anyone else who might come across this: I managed to solve the problem.

  The problem seems to be that on some computers, the 'utility WIDCOMM Bluetooth Software' is installed. This software utility may be marked specifically for the manufacturer of your computer, for example, in my case, it was called "Thinkvantage Bluetooth Software".

  Disabling the adapter embedded Bluetooth does not remove completely all network adapter drivers that are associated with this piece of hardware: the WIDCOMM Bluetooth Software utility adds a few network cards.

  When you then use an adapter Bluetooth from another provider, driver installation may fail when the chipset you are installing is not compatible with these network belonging to a different chipset drivers.

  I realize the use cases this is not very typical, but it's very confusing when it happens!

  In order to solve the problem, make sure that you uninstall any Bluetooth software from other providers before you install the drivers for your new Bluetooth adapter.

• HP Jet 7, 8.1 Win Win 10 update and Bluetooth "devices errors."

  I did the upgrade from 8.1 to win to win 10.  So far, I've noticed all my devices Bluetooth "devices errors."  I have deleated all BT devices and tried to charge the BT device to my soundblaster roar 2 and a simple generic keyboard and I got the same results. I have tried reconnecting with other devices.  Did someone went down this path? HP, Microsoft, suppliers... has a driver upates?  I have not read on win 10?  Device Manager will be my frined here, deleting and reloading BT associated drivers?  What do you say?

  Hi, Yes, my bluetooth mouse works fine on my Stream with 10 Windows 7, device drivers are available from hp.com.  You could try to reload the driver bluetooth of Windows 10.

• The local Bluetooth adapter has no indefinite way

  Hello

  Every time after reboot of my PLUA1E Satellite Pro U200-02802QS4 with Vista Business 32-bit I get this error:

  Log name: System
  Source: BTHUSB
  Date: 26.11.2009 15:26:07
  Event ID: 17
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: toshiba
  Description:
  The local Bluetooth adapter has failed in an indefinite manner and will not be used. The driver has been unloaded.

  The latest Bluetooth driver is already installed.
  How to solve this problem?

  Have you tried to remove the preinstalled BT stack and install again?

• wrong to reconnect the mouse bluetooth (kensington pilotmouse #72414)

  to restart the computer. How can I reconnnect? I had to remove and reinstall the device each time, so there must be an easier way? Thank you

  Hi JoelAndersen,

   

  (1) you get an error message?

  (2) what version of Windows you are running on the computer?

  
  Method 1: you can check if the provided Bluetooth below the parameters are properly checked

  a. open Control Panel by clicking the Start button, then Control Panel.

  (b) in the control panel search box, type Bluetooth, and then click Change Bluetooth settings.

  (c) in the Bluetooth settings dialog box, click the Options tab and do one of the following:

  O to make your computer discoverable to Bluetooth devices, select the check box for allow Bluetooth devices to find this computer.

  O for you to add compatible Bluetooth devices to your computer, select the check box for allow Bluetooth devices to connect to this computer.

  See below the help link
  

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  (Links above applies to Windows 7, steps for other Windows operating systems)

  Method 2: you can also check out the link below to fix this problem

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  You might want to know

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

• Need drivers for Microsoft Bluetooth Enumerator in Windows Vista.

  Original title: Microsoft Bluetooth Enumerator lost vista drivers

  Vista Microsoft Bluetooth Enumerator lost drivers.

  Can anyone advise how to find and download above.

  Thanks, Pete

  Many web searches indicate that there is no product like the Acer Aspire One Z3. It's Acer Aspire One ZA3. In addition, ZA3 is not the complete model - search the Web, point that the Acer Aspire One ZA3 is Acer Aspire One AO751h.

  The Acer site has drivers for the Acer Aspire One AO751h netbook.

  Download Bluetooth for your netbook (Windows Vista 32-bit) drivers and install them.

• Vista 32 bit bluetooth discover error

  Bluetooth Service error: An occurd err when wind was once your settings. The BTDevice may be disconnected. The following non saived: discover the parameters; Connectivity settings.  I'm trying to get my Windows Phone 6.5 to connect to my computer from gateway with Vista Ultimate, I fell twice and it has restarted professionally both times, but I'm sure they were not flawless... Please help me.

  Hello

  Method 1:

  You can run the Fixit tool provided in the link below and if it help to resolve the issue.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Method 2:

  I suggest you to check the Bluetooth services. To check the Bluetooth service follow the steps below:

  (a) click Start

  (b) open Control Panel

  (c) select administrative tools.

  (d) right-click on the service and select run as administrator

  (e) make sure that the Bluetooth function is set to automatic

  Method 3: Reset the unit.

  ·        Remove and reinstall the device.

  (a) click the Start button, select Control Panel, click hardware and sound and then click Bluetooth devices.

  (b) select the device that does not work, then click on remove.

  (c) click Add, press the reset button on the unit (or make it discoverable following the manufacturer's instructions), select the device is set up and ready to be found check box, and then click Next.

  (d) if the device is not found, repeat the previous step. When the device is found, select it and then click on Next.

  (e) follow the remaining instructions in the wizard.

  You can also post your question on the link below:

  http://answers.Microsoft.com/en-us/phone/default.aspx#tab=4

  Thank you, and in what concerns:
  Naman R - Microsoft technical support engineer.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect Bluetooth mouse error Code 0 x 80070015

  Title of the Moose: 0 x 80070015

  Bluetooth mouse does not connect and displays the error code 0 x 80070015. How can I fix?

  Hello

  ·         What is the brand and model of the mouse?

  This problem may occur when there is a problem of compatibility between the transmitter and the battery Microsoft Bluetooth. Or, it can occur if the computer uses a stack non-Microsoft, and this battery is not compatible with the device of the Bluetooth mouse.

  Method 1: Follow the steps mentioned in the link below

  The problems with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Note:

  The link above also applies to Windows 7.

  Method 2:

  To resolve this issue, contact the manufacturer of the laptop to see if their transceiver works with the Microsoft Bluetooth stack. In addition, ask the manufacturer how to add devices using the Microsoft Bluetooth stack. If the device Microsoft included its own transmitter/receiver, you may need to use the Microsoft transceiver for this problem.

  You can check the link below

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

• Cannot connect anything through Bluetooth. Errors of pilots and other devices.

  Hello

  I am unable to connect anything to my computer via Bluetooth most. I used to connect my Flip JBL speakers to my PC via Bluetooth, but now I can't.

  Under my devices and printers, there is an icon on my PC and JBL Flip which declares that both need to troubleshooting for the missing drivers. When I try to get these drivers, they are unable to do so. Recently, this problem happened after I tried to connect my Dual Shock 3 controller to my Kinivo BTD - 400 Bluetooth USB Adapter. (I'm on a laptop and also have built in Bluetooth).

  In Device Manager, I have the following errors:

  Interface devices:

  -Bluetooth Remote Control: this device cannot start. (Code 10)

  Other features:

  -Bluetooth device: the drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information.

  -Bluetooth device: the drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information.

  -Unknown Device: The drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information.

  Sound, video and game controllers:

  -Bluetooth hands-free Audio: this device cannot start. (Code 10)

  My built-in Bluetooth does not work with any device and is neither my Kinivo. I am currently working with the support Kinivo customer as well, but I need help here, too.

  Looks like your driver is missing or corrupt.

  Try to download your Bluetooth driver for your laptop from your site of manufactured goods.

  Uninstall existing bluetooth driver, reboot the PC.

  Then install the latest bluetooth drivr, downloaded from the website of the manufacturer. Then try to connect to your bluetooth device.

• Multiple instances of the Microsoft bluetooth stack

  Hi all

  I'm having a problem in the use of two adapters Bluetooth Microsoft Bluetooth stack. Or the other adapter works fine until the other adapter is not connected. When other adapter is connected, it does not starts shown in Device Manager. Reason, displayed is that device can not start (error code 10).
  I think it's because of the connection of Audio service resource conflicts that might be solved if multiple instances of Microsoft Bluetooth Stack may be executed or some configuration settings. I'm fighting for a long time, but I still have not found any method of work.
  Bluetooth adapter: Atheros 3011.
  Error with the second device:
  
  Error message:
  

  Hi Suresh,

  A single active Bluetooth radio is supported both in Microsoft Bluetooth Stack. It should be possible to establish a connection to a few destinations at the same time using a radio. No battery on Windows supports more than one radio.

  To get help on this question, I suggest you to report your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro&filter=AllTypes&sort=lastpostdesc

  It will be useful.

• How can I fix the generic bluetooth drivers. Update failed

  AV tried to update my Bluetooth drivers from Device Manager but nothing works. My Internet connection is good, but the drivers will not be updated

  Hey, Azul,

  It would help if you could answer these questions in order to better understand the issue.

  -What is the brand and model of your computer?
  -What error message do you receive when you try to update the Bluetooth drivers from Device Manager?

  Please visit the website of your computer manufacturer and download the latest Bluetooth device drivers, based on the type of computer system (32-bit or 64-bit).

  In a time of solving problems, try to uninstall the device from Device Manager and then restart the computer and check if the drivers are installed automatically from Windows Update.
  Reference: http://technet.microsoft.com/en-us/library/cc725782.aspx (see the steps in the section "to uninstall a device"

  Let us know if it helps.