The 1142n controller code

Similar Questions

• pageButtonBar don't train not move to Page 3 without the controller Code.

  Hello

  I'm practsing Train updated the OAF tutorial that comes with the Patch of the EBS R12.1.3 OPS.

  After you have created the 3 pages, I created a page EmpTrainRN.xml (train style) with 3 TrainSteps of type link. I have no problem in visiting all 3 pages by clicking the bullets next to each step.

  

  I also have EmpTrainFooterRN.xml (style pageButtonBar) with a navigationBar including = 1 step and the last step = 3. (The Destination URI has been set correctly).

  After the launch of the first page, I am able to visit the second page by selecting the next button. But when I click the button following once again, the same 2 page is being updated - rather than page 3 launched. This is not the expected behavior.

  However when I put the code below in the processRequest controller (for EmpTrainFooterRN), I am able to move on to page 3 using the next button.

  OATrainBean trainBean = (OATrainBean) pageContext.getPageLayoutBean () .getLocation ();

  trainBean.prepareForRendering (pageContext);

  step int = trainBean.getSelectedTrainStepRenderedIndex ();

  OANavigationBarBean navBean = (OANavigationBarBean) webBean.findChildRecursive ("NavBar");

  navBean.setValue (step 1);

  This piece of code is not present in the tutorial Oracle OAF, but I found this by reseraching, Web site at

  https://blogs.Oracle.com/prajkumar/entry/implement_train_in_oaf_page

  However, I tried the tutorial to Train at the below Web site that does not use any Code from the controller, but it enabled navigation on page 3 using the next button

  http://www.yesyespatil.blogspot.in/2013/11/creating-train-region-in-OAF.html

  Y available documentation explaining under what circumstances the step value should be increased in the highest maaner in pageButtonBar train controller, or anyone can shed some light on this.

  Thank you

  Hello Sanjay

  I found the problem and the solution.

  Your destination in the navigation links are wrong.

  First, they must begin by "OA.jsp? page =".

  Second, they must correspond with the destination links in the area of train.

  This is how the framework includes the relationship between the bar of navigation and train.

  In your application when I turn to the second page with a next button, navigation bar did not get updated. That's how I found the problem.

  Change your links as navigation bar:

  / sanjay22/Oracle/Apps/AK/Employee/WebUI/EmpUpdatePG-online OA.jsp?page=/sanjay22/oracle/apps/ak/employee/webui/EmpUpdatePG

  / sanjay22/Oracle/Apps/AK/Employee/WebUI/EmpAssignPG-online OA.jsp?page=/sanjay22/oracle/apps/ak/employee/webui/EmpAssignPG

  / sanjay22/Oracle/Apps/AK/Employee/WebUI/EmpReviewPG-online OA.jsp?page=/sanjay22/oracle/apps/ak/employee/webui/EmpReviewPG

  Kind regards

  Anil

• failure of the graphics controller envy14t-1000 flashes code?

  For laptop of HP Envy 14-1000. i5 - 450 M, Radeon 5650 M. Out of warranty. New installation of Windows 8 Professional on an OCZ Agility SSD 4.

  At startup, caps lock flashes code indicates a failure of the graphics controller. Stays on for 2-5 minutes, but will then start Windows. This indicates imminent failure and a replacement motherboard is necessary, or is it the result of something else?

  On your laptop, there are several codes of different flashing given by a flashing caps lock key. You say that it is the graphical model controller failure error light. Use this document to make sure it is the correct error code.

  The ENVY of laptops series have their GPU soldered onto the motherboard. So if you've got a controller failure graphics card you might have to replace the entire motherboard of the laptop. This interview is possible to do it yourself, although difficult. Even if you specify your product is out of warranty, I suggest to contact HP Technical Support again and look in an interview of the laptop. If you are in the USA / Canada, you can contact HP at 1-800-474-6836. If you are outside the United States / Canada then here try to find contact information for your region.

• Card PCMCIA Avaya on a machine Satellite Pro 4320 - 31 to load the driver error code

  The machine works perfectly in all respects. Recently attempted to add an Avaya Silver wireless card to the system.

  Somehow the system has problems with the supplied driver. I have redownloaded the driver support site (now on version 7.62, the driver should support the card as a "Avaya Wireless PC Card".) I have to the latest driver available.

  Given that the machine works under Windows 2000, SP4 and all available patches, and yet didn't have questions about installing a card like this on a Windows 2000 computer before, I'm a little confused as to what may cause the problem.

  The card is detected properly, and the pilot is recognized. When installed the Device Manager still representing a yellow exclamation mark on the map of Avaya. When investigating this error shows that Windows 2000 cannot load the drivers on an error code 31.

  I found Code 31 made reference to possible support material that gives the questions. I turned my attention to the CardBus controller (ToPIC100 according to Device Manager). The version used is Microsoft, 20/06/2003, 5.00.2195.6717.

  Appearantly it is a newer driver (5.1.2600.0) but I failed to bring one downloaded. Seems that it is only available through Windows Update, which does not show the update as being available for the machine.

  Then... Anyone know how to get the map Avaya Wireless Silver active PCMCIA on a Satellite Pro 4320? I need a newer driver, or can not be done at all?

  [Edited by: admin on 26 June 05 20:19]

  Hello

  Can you please check this 2 & temp 108020 = .bucketID & PAGE = Document http://support.avaya.com/japple/css/japple?temp.documentID=127473&temp.productID=10763. Maybe it helps you too.

  Good bye

• Satellite A100-773 - how to install the Ethernet controller driver?

  Hello

  I reinstalled Win Xp Prof on my satellite A100 - 773 (PSAA9E) and have a problem with the Ethernet controller. In Device Manager, the controller is marked with a yellow '?'.

  I use this driver http://de.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=DE&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 624 & selSho rtMod = 444 & language = 17 & selOS = 10 & selType = all & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 12 & electedLanguage s = 17 & type = all & page = 2 & ID = 55434 & DISO = 1 0 & driverLanguage = 42

  Install it on the Device Manager and right click on ethernetcontroller - installation driver. This is the message that no driver is found (in the right! folder) nothing can be installed...

  I also remove ethernet controller, so that windows automatic reseacht for this, but nothing works.

  I don't know what I can do

  PS: Chipset utilities are installed

  Hello

  I can post a link where you can download the driver but I put t know what driver is missing now. Do you mean the WLAN or LAN card? What is the device?

  Please check the vendor and device ID to identify which device needs a driver. Go to Device Manager > right click on Ethernet controller > properties.
  There you should find some information like PCI\VEN_xxxx & DEV_xxxx
  With these codes you can look here to identify the device: http://www.pcidatabase.com/

  After this verification, the page of Toshiba to download a driver.

• Upgrading the graphics controller on Satellite A30-404

  I have a Satellite A30-404 with a relatively weak Intel® 852GME Graphics controller, some people say that you upgrade this computer laptop isn´t possible since the graphics controller is onboard, but after some research on www.intel.com I came to the conclusion that this chip after all is not onboard but is a slot to order ATI or Nvidia a better graphic chip trough. but iam still not sure if the chip is integrated or not so I wanted to know if this is possible

  Hello

  On the net I found detailed information on the graphics chip:

  Intel 852GME graphics controller
  Montara GT code name
  Yes engine 2D
  Yes 3D engine
  64-bit memory data Bus width

  But as far as I know it s not possible to update the graphics card.
  If you want you can ask to view ASP.

  Good bye

• HP DV4272US: 28 video controller Code...

  I've upgraded Windows XP to Windows 7 Home Premium, I get a Code 28 near the video controller, it is not to identify the type...  HP does not include drivers for this because the OS is not supported...

  I have updated the Chipset drivers and I still have the Code 28...

  Need help... Thank you

  Windows 7 Home Preimum... 32 bit... HP DV4272US

  Hello:

  The graphics card in your laptop is not quite able to run Vista or 7.

  This is a driver that will allow you to change the resolution of the screen and have the graphics acceleration, but you don't have Windows Aero, because the GMA900 graphics card is not capable of running Aero.

  Download and run this driver.  You will probably get an error not supported operating system.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=447304&swItemId=ob_47264_1&swEnvOid=2096

  Conclusion of any windows error.

  Go to Device Manager and click on the video controller requiring driver.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the graphic driver file.

  This file will be located in C:\SWSetup\sp34749.  Make sure that the include subfolders is selected, and the driver should install.

  Reboot and your graphics card should work - but not Aero.

• Executable cannot find the custom error code file

  I'm building a LabVIEW 2013 application on a Windows 7 computer and deploying it to a Windows XP computer. My application has a custom error code file, stored in -- errors.txt, but my executable on the Windows XP machine can't find the custom error file and returns only the string of appeal for all errors that occur.

  When you use is not an installer, I tried to copy the error code at all locations listed here: http://digital.ni.com/public.nsf/allkb/6077DBEDA4F9FEE3862571F600449501 but the application still does not load the custom errors. I have the box checked to "Error Codes customized Include" in the construction specifications.

  When an executable of construction and the development of Windows 7 to XP, where do I put the custom error code file? It is found in Program Files (x 86), but find not because it's XP?

  It's been a few months that I posted this question and I do not know if someone cares about this track, but the solution I found was to put the custom in error code file \National Instruments\Shared\Errors\English\

  There are other places that the runtime will look for the custom error codes (I tried all the ones listed above), if the same error codes exist in 2 places the error popup will appear two error messages. Error default 1, it looks like:

  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.
  =========================
  NOR-488: Command requires GPIB controller charge controller.

  So if you have a custom error code file and it is available in 2 places that LabVIEW RTE check error codes, you will get the same message before and after the =.

  List the error as "still included" file when building the executable or by checking the box to include files in error did not tour, obviously. Unless you create a Setup program to distribute the application, the error code file must be moved manually. Shared\Errors file works best for me because it's a place that makes sense.

  Also, don't worry - it doesn't me taken 5 months to understand this point, I do not update all my loyal followers (ha) with a solution.

• Excel sheet entry to 'setpoint' of the PID controller

  Hello

  I use this (attached) vi to control the thermostat of Lakeshore. I got the website vi OR. I want to change the vi as to the set value, it takes as input an excel sheet (could be any other form too). This spreadsheet contains a list of temperatures. The vi reads the first temperature and then that sets the value of the PID controller setpoint. Once the set point is 'set' the vi waiting for awhile (say 1 hour) before reading the next entry in the excel sheet set point. I want to wait that it is because I programmed a gamma spectrum software such that it counts for 1 hour and then starts a new count. The part of the spectrum is not very intelligent but its ok for now. The problem I have is that when I run this vi (attached), the indication of the set on the temperature controller (hardware) tends to zero and stays there. Can someone help me by pointing out the error that I do. This vi is Labview based 6.0 (it's a bad implementation!)

  Thank you

  Saurabh

  Slim,

  You could possibly have the calendar in step in the worksheet as well?

  It would be a classic case where you could use state machines (or producer / consumer - events if the user input is critical), research of this architecture and examples on ni.com. Also for synchronization purposes, are looking for functional global timer or try to modify this example https://decibel.ni.com/content/docs/DOC-6523 to add 'elapsed time' (as in the elapsed time express vi) features similar to this code.

  You have reports such as:

  Initialization: initialize your control panel front/graphics etc. Read the spreadsheet file. Make sure that the comms exist between the software and the controller, etc..

  Set the temperature: set the first value, start a countdown (depending on what you set)

  State check: check the status of controller etc failure. Check if the user has pressed the stop button. Check if the timer in the previous state has expired?

  In case of error stop the timer and take the measures necessary to correct, to report to the user

  If the user has pressed the stop button, close all references, etc hard reset and exit the application.

  If the timer has expired, get the next value and go on to set the temperature.

  I hope this helps.

• Pavillion DV-2001TX: I can not find the diver of the multimedia controller

  I can't find a driver for the multimedia controller on Win 7 64 bit for a HP Pavilion dv6-2001tx.  The information I have in Device Manager are:

  "Multimedia controller".

  Type of device: other devices

  Manufacturer: unknown

  Location: PCI Bus 4, device 0, function 0

  The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver. »

  Help me please.

  Thank you.

  Hello:

  Maybe that's...

  This package provides a TV Tuner driver for laptop models supported and operating systems.

  File name: sp45500.exe

• EliteBook 8440p: error of the Pci controller

  Hye guys really need help!

  My laptop will not boot up to windows, always shows auto reboot pci controller and the error...
  Any idea?

  Have you checked with win 7 OS, Alternatively, please provide the exact error code.

• migration of APs to the 5508 controller 4402

  Hello all,.

  We have two controllers (4402 and 5508) to one of the site.

  Customers of services at present.

  Both controllers have the same set of SSID but uses only a single group of AP.

  What would be the best means to move APs on 4402 to 5508?

  4402 services series years 1230 and 1240 AP. And looking at the note accompanying the WLC 7.6 code located on 5508,

  years 1240 only are supported. So, we will need to get the replacement of the years 1230.

  Someone suggested to go into every single years 1240 and change high availability for point to 5508 as primary and secondary 4402

  (just in case the AP don't is not the controller) 5508 Once this is done, I can add the AP in the access point default of the group to broadcase the same SSID.

  Is it enough for the task of migration?

  Also, what is the requirement of default design for the number of necessary uplinks?

  We have about 150 APs currently on 5508 that uses Group LAG of 1 4 uplinks.

  Regarding the 4402, it is service 60 APs with 1 2 uplinks.

  Thus with the APs on 4408 joining the 5508, 5508 serves about 210APs. 4 1 enough uplink is?

  What is the best practice recommended requirement of uplink AP?  APs on 5508 are 3602 s and 3702 s.

  Thank you in advance.

  P.S. BTW two controllers are part of the same mobility group

   Someone suggested going into every single 1240s and change the high availability to point to 5508 as primary and 4402 as secondary.(just in case the AP does not join the 5508 controller.) Once that is done, I can add the AP into the default AP group to broadcase the same SSIDs.Is that enough for migration task?

  Yes, it is sufficient. Unless 5508 have the same available on 4402 AP group name, all years 1240 migration goes into default-group & you may need to add to the good group of AP. It is advisable to have same AP group created between the controllers where AP configured for failover.

  Don't forget 1240 last took in charge in 8.0.x code. In order to better plan as well before moving on to 8.1 replacement code (expect less than 1-2 months of time). See below for more details compatibility matrix

  http://www.Cisco.com/c/en/us/TD/docs/wireless/compatibility/matrix/compatibility-matrix.html

   Also what is the default design requirement for the number of uplinks needed? We have about 150 APs currently on 5508 which uses LAG group of 4 1G uplinks.Thus with APs on 4408 joining the 5508, 5508 will roughly serve 210APs. is 4 1G uplink sufficient? 

  4G LAG is more that sufficient for 250 AP, I'm sure that together the traffic will be much less of 4G if monitor you the traffic volume of the art on this trunk links.

   What is the best practice recommended AP to uplink requirement? APs on 5508 are 3602s and 3702s.

  I guess that all of these AP connected to 1 Gbps switch compatible PoE ports +. If your binding rising intercommutation is 1 Gbit/s, which would be the bottleneck, WLC to SW LAG before becoming a bottleneck.

  HTH

  Rasika

  Pls note all useful responses *.

• Remove the SCSI controller change question of VMWare

  Hello

  I used PowerCLI for create a virtual machine and replace it with instead of buslogic SCSI LSILogic controller. I did it by using the following code:

  function updateSCSIController ($vmName, $ctrlName)

  {

  $vm = get - VM $vmName | Get-View

  1. Get the controller and devices on

  $vm. Config.Hardware.Device | where {$_.} DeviceInfo.Label - eq $ctrlName} | % {

  $oldCtrl = $_

  $ctrlKey = $_. Key

  $devs = @)

  $_. Device | % {

  $devKey = $_

  $vm. Config.Hardware.Device | where {$_.} Key - eq $devKey} | % {

  $devs += $_

  }

  }

  }

  1. Create the specification for the device changes

  $bootDelay = 10000

  $spec = new-Object VMware.Vim.VirtualMachineConfigSpec

  $spec. BootOptions = New-Object VMware.Vim.VirtualMachineBootOptions

  $spec. BootOptions.BootDelay = $bootDelay

  1. Remove the old controller

  $old = new-Object VMware.Vim.VirtualDeviceConfigSpec

  $old.device = $oldCtrl

  $old.operation = 'delete '.

  $spec. DeviceChange += $old

  1. Update the devices connected to the controller

  $devs | % {

  $dev = new-Object VMware.Vim.VirtualDeviceConfigSpec

  $dev.device = $_

  $dev.device.ControllerKey = - 100

  $dev.operation = "Edit."

  $spec. DeviceChange += $dev

  }

  1. Add the new controller

  $new = new-Object VMware.Vim.VirtualDeviceConfigSpec

  $new. Device = New-Object VMware.Vim.VirtualLsiLogicController

  $new. Device.Key = - 100

  $new. Device.ControllerKey = $oldCtrl.ControllerKey

  $new. Device.UnitNumber = $oldCtrl.UnitNumber

  $new.operation = 'Add '.

  $spec. DeviceChange += $new

  $vm. ReconfigVM ($spec)

  }

  However when I try to start the virtual machine Via code, it gives me an error saying that the virtual machine has questions to be decided.

  This is the question asked by VMWare:

  sg.disk.AdapterMismatch: the disk attached to the node SCSI0:0 has been created for the Buslogic SCSI adapter but SCSI0 Virtual Machine device is a SCSI LSI Logic card.

  VMware ESX Server can change the free disc adapter type. Attention of the user, if a guest operating system is installed on the drive, it is perhaps not able to start.

  Do you think Vmware ESX Server to change the type of adapter for SCSI0:0 disk

  This issue can be removed through PowerCLI?

  This is the part of code that fails

  updateSCSIController - vmName $name - ctrlName "SCSI controller 0.

  Start-VM - $vm VM - confirm: $false

  $vm | Get-CDDrive. Game-CDDrive-connected: $true - confirm: $false

  I don't know if you can remove the question, but you can respond with the Set-VMQuestion cmdlet.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Failed to create the reference to the FXMLLoader controller: "no constructor appropriate."

  Greetings,
  
  I'm in my first two days, experimenting with JavaFX.
  
  I am trying to create a reference to my controller class to in my routine of starting application. All the posts I've seen on this call to the code as follows:
  

   FXMLLoader fxmlLoader = new FXMLLoader(getClass().getResource("MyFXML.fxml")); 

  But in my NetBeans IDE editor this code reports the error "no suitable constructor found for FXMLLoader (java.net.URL)."
  
  The documentation for the FXMLLoader class undeniably a constructor FXMLLoader (java.net.URL). However, when I access the NetBeans source code, this constructor does not show: the only options are FXMLLoader() and FXMLLoader (Charset arg0).
  
  I use NetBeans 7.1.2 ee version. I was using JavaFX 2.0, then downloaded the SDK 2.2 JavaFX (beta) to see if it would make a difference - she didn't.
  
  Any ideas would be very appreciated.

  Hello

  My guess would be that NetBeans resumes still jars of JavaFX 2.0 instead of JavaFX 2.2

  I would say that play with the properties of your project: examine the library dependencies and the platform.
  If you use a Default_JavaFX_Platform then check where it picks up JavaFX (click on 'manage the platform' and look in the JavaFX tab).
  Sometimes, NetBeans is confused and will resume the 2.2 SDK with the 2.0 runtime - check if really all paths!

  Hopes this helps,

  -daniel

  Published by: daniel June 13, 2012 06:18

• How to capture the value of the profile controller option in the OPS?

  Hello
  
  I have a requirement to capture the value of the value of the profile controller option in the OPS?
  How to write the code for this?
  
  Thank you

  Hello

  I have a requirement to capture the value of the value of the profile controller option in the OPS?

  Pagecontext class we getProfile method using this you can get the value of profile:

  pageContext.getProfile ("profilename");

  Concerning
  Meher Irk