The 1310 AP configuration and IOS

Similar Questions

• Options has dissappeared form my top bar (the classic theme configuration) and with it, spell checker and al.

  Options has dissappeared since my top bar (the classic theme configuration) and with it, spell checker and al., search help find nothing useful, as usual. Am I the only one wondering how to access functions to be included under Options?

  You have solved my problem, and I wanted to thank you again for your help and your patience.

• VI Analyzer Questions: Change the default test configuration and screw "Pavilion".

  I have two things I continue to come through in VI Analyzer:

  1. are there in any case to set the default VI Analyzer so that it applies to all projects, I'm working on that?

  I tried to create a task in project A, registration of the configuration and any attempt to open this file in project B, but it says that the file could not be loaded. The reason for my question is that there are a few default options that just add errors that we don't care (e.g. Controls dialog on the façade - 99% of the LabVIEW code that we are working on is called from TestStand as code modules, so the front panel doesn't really count)

  2. can I score / report some screws as 'safe' for parser tests?

  Basically, some screws may fail some perfectly safe way VI Analyzer tests (e.g. non-stanard errors on a 'closing' VI, who doesn't have a case error structure so that the device always gets closed). I wish I had a way to mark the VI kind VI Analyzer would ignore this particular test. This would allow me to have a rule that says something like "before any construction, run the file configuration VI analyzer and make sure there is not error", as opposed to "run VI Analyzer and examine errors, decide whether or not they are important for the VI in question..." ». An extension to this question would be how do I perform a task VI Analyzer before building when the VI Analyzer screw do not accept files cfg for project based tasks.

  Any help would be greately appreciated!

  Thank you

  Shaun

  1. a project oriented .cfg file cannot be transferred between projects.  Could you possibly create a .cfg unrelated to the project file (under the option 'Start a new task' on the first page of the VI Analyzer) and use it?  He would have no file in the list, but it would have all of the configured tests as you want.  And you could start with this on your different projects .cfg file... you would just add screws based on file (on page 2 of the VI Analyzer), rather than have all come to you in a .cfg project-based.

  2. on page 4 VI Analyzer, you can exclude certain tests to run on some screws and save these settings in a .cfg.  This option is also exposed in the VI Analyzer API with VIAn exclude the VI.vi Tests.

• After trying to use Fix - It to fix XP does not recognize the USB key, had to go back to the last good configuration and computer charge always VERY slowly. What's past and how to fix it?

  Windows XP SP3 has ceased to recognize a USB flash drive and card reader that he always acknowledged in the past. I tried to use Fix - It to correct the problem. Fix - It is then asked to restart the computer. When the computer is restarted, it would not load. After waiting almost two hours, I restarted with the last good configuration. Then reloaded, it took nearly an hour. Before using the Fix - It, the computer was loading in less than five minutes after a reboot. There a lot of things on it. What can I do now to solve the problem posed by Fix - It and also correct the problem with XP recognizes does not flash drives?

  Hi lental,

  ·         Have what fixit you tried?

  ·         Do you have an error message when you try to start the computer in normal mode?

  ·         What is the brand and model of the computer?

  ·         You're able to boot in safe mode?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  Method 3: Follow the steps in the article to resolve the problem of USB.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  Advanced troubleshooting tips for General USB for Windows XP problems

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  Slow PC? Optimize your computer for peak performance

• The numbers E.164 + and IOS voice translation rules

  Hello

  I have a cluster to CUCM 9.x with a plan of + E.164 numbering for the receivers, route patterns etc.

  I have a gateway ISDN (2911 SRI with IOS 15.3 (3) M1) which connects to the PSTN.

  The ISDN provider cannot accept the destination for the format + E.164 numbers so I need to manipulate the figures called before sending them to the PSTN switch.

  I can of course do this with CUCM party called models of translation, but I wonder if it is possible to do the translation on the bridge instead?

  The rule I tried to use below (Country Code of the United Kingdom).

  rule 1 / ^ + 44\(.*\) / / 0\1 /.

  I want it to do is + 44 at the beginning of the number of bands and replace it with 0

  for example + 441234444666 becomes 01234444666

  The rule I've tried fails because the + symbol is identified as a wildcard rather than in the number string I want to match.

  Is there a way to get around this?

  Thank you

  Hello James

  This is a regular expression, have you tried setting point (.) first then + followed by your number

  I'll try in the laboratory

  BR,
  Nadeem

  Please note all the useful post.

• The computers on the network: not configured and do not want

  If I turn off network discovery in the advanced settings of the network and sharing in my two computers Center, a 10 Windows and other Windows 8, will then not recognize each other while at home, both connected to my wireless phone?

  I just did a factory on a single computer restore and - this has never happened before-, I noticed that what I was adding or editing in a computer occurred then the other, I don't want to. For example, I changed my wallpaper in one and the other was automatically the same background a few minutes later.

  I want to be able to use the two computers in my house, but keep them separate. I guess the power off network discovery will do the job, but am not sure. I guess I DO NOT want TO or should not, unplug the network in general or the network driver. I don't even know the difference between the two.

  I also want my wireless adapter to continue working and I read that disconnection from the network can change something in the adapter.

  Finally, I do not understand why the computers now appear automatically connected, because I did restore factory before and this has never happened.

  Hello Daffy,

  Thanks for posting your query in Microsoft Community. I will certainly help you with the problem you are experiencing.

  If you disable the network discovery, you will not be able to share files and folders between devices on the same network.

  The problem you are experiencing is due to the synchronization between devices with your Microsoft Account. When the synchronization is turned on, Windows keeps track of the settings that you care and sets them for you on all your devices Windows 10.

  You can choose to synchronize/UN-sync things such as web browser settings, passwords and the color themes.

  So, I suggest you disable synchronization of Windows settings.

  Reference: "choose what sync settings".

  Sync between multiple PC settings with OneDrive

  Hope this information is useful. Keep us informed of the results. We will be happy to help you.

• V26, about the differences between Android and iOS

  I asked a question yesterday about the Adobe ID number that we use to create multiple Folio and track stats for Android, iPhone & iPad downloads etc.  Now that v26 goes direct, it won't really be a difference between the display of our publication on Android or Apple device. We use about images and texts, really no videos used.

  We used to create a good sharp vector folio for ipad, then reuse everything and put it all to "raster" and for Android devices. (we allowed just the device Android to the scale of our content)

  But I'm curious...

  Now that v. 26 allows PDF on the Android articles... There is really no need to create another option of folio for us.

  But what about the cost?

  If we just download the 1 folio to be viewed on both devices, how understand us what our publication is read on most of the platform?  The service determines DPS what folio will receive a user based on the device ID?

  just curious to see how this is handled.

  Thank you.

  Analytics is presented separately for each device. If you use SiteCatalyst, you can do various reports based on the type of device.

  Neil

• The OID Instance Configuration and Configset

  Hello
  I have 2 instances of ODISRV running with configset = 1
  
  /odisrv instance = 1 configset = 1 port = 636
  /odisrv instance = 2 configset = 1 port = 389 debug = 2047
  
  confiset = 0 is for the provision of
  ConfigSet = 1 is for DIP synchronization
  
  is it necessary to have for example configset = 0 = 1 and configset = 1 for example = 2
  Pls clarify this point.
  
  
  Thank you and best regards,
  Azeem.
  
  Published by: user10702974 on February 16, 2009 02:25
  
  Published by: user10702974 on February 16, 2009 03:13

  Well the truth of the matter is that the instance number that you specify can be any number not already in use.

  An instance number is not related to any configset. So yes, I could start odisrv configset1 1 instance and start the instance 0 2 configset if I wanted to.

  We just can't start any OID process more than once with the same number of the instance.

  I hope this helps.

  jlray

  Support from OID

• Will there be improvements made to the features of VPN configuration and firewalls in the ACC?

  Future versions of CCA will have the ability to set up the VPN site-to site on UC520s, UC540s and SR520s without having to use the Multisite Manager or CLI? With non-SBCS Cisco VPN products have a Cisco's GUI to configure site-to-site VPNs. The UC520, UC540 and SR520 are the only Cisco products (with the exception of products that have reached end of life status) who do not have this capability in a sort of Cisco's GUI (apart from the Multisite Manager of CCA 2.1 and later versions).

  Future versions of CCA will allow you to modify the firewall on UC520s, UC540s and SR520s rules without having to resort to the CLI?

  Almost all Cisco products, except for UC520, UC540 and SR520 series products, have a Cisco's GUI to configure these features. The SA520 and SA540, these features can be configured in the web GUI. The Cisco ISR, these features can be configured through SDM or CCP. CCA has always had the ability to fix UC520 unit, but he had not the possibility to fine-tune the settings of firewall and security, unlike the web interface SA500, SDM or CCP.

  Reasons why having the skills to the CCA is important:

  • These characteristics are indicated on the data of UC520, UC540 and SR520 sheets
  • The opportunity to refine and verify access control lists in the ACC can accomplish the following:
    • Ability to comply with HIPAA, Sarbanes-Oxley, PCI, etc.
    • Improved troubleshooting
    • Eliminates the need to use CLI to refine or verify the firewall settings
  • VPN site to site can currently be configured via CLI or the CCA Multisite Manager
  • Multisite Manager CCA can be used for virtual private networks between UC500 or SR520s placed in front of UC500 units units
  • CCA Multisite Manager cannot be used for VPN between autonomous SR520 units, or between a unit UC500 and endpoint non-UC500 (with the exception of a placed in front of a UC500 unit SR520)
  • All images IOS Supportepar UC520 units, UC540 and SR520 routers have firewalls and VPN capabilities described here

  Hi John,.

  The ACC is a configuration tool for platforms that are part of the SBCS solutions. Multisite manager is the approach we take to configure a VPN site. Enchancements in customization of the firewall and access lists is something we plan to put on the roadmap. We will continue to improve the CCA to meet these requirements. We will schedule to get these features added in the 2010 calendar.

  Thank you

  Saurabh

• ISIS nonfunctional routing on the GSS (as well as the JunOS and IOS devices)

  Hello

  I have create a routing configuration that is quite impressive, but I have a strange error.

  As you can see in my schema (also PDF included in the attachment for better resolution) you will see that:

  • the GSS does NOT receive routes announced since the JunOS and IOS devices.
  • the JunOS and IOS devices are to Exchange routes between them
  • the contiguity between the IOS device and JunOS is fine (what is expected if they Exchange routes)
  • the contiguity between IOS / price Juno and the GSS is also very good (but no route of JunOS and IOS are received)
  • OSPF works very well (routes are received to connect by the ESG)
    

  
  

  Does someone experienced this problem front?

  
  

  Can someone point me in the right direction?
  

  

  I have also included the log file when there is no concept of this course are received...

  Thank you

  Hello

  Try to set the metric-style scale

  Cisco:

  conf t

  Router isis

  metric-style scale

  Juniper:

  define isis level 2 scale metric-only protocols

  define isis level 1 scale metric-only protocols

• Frozen contacts after iOS 10.0.1 update on the iPhone 6 s and sometimes phone stops itself

  Hi all

  My contacts sometimes freeze (when I search a contact) and I have to force to leave contacts/phone to re - use the contacts/phone app. This has happened only once 10 update iOS. My phone also sometimes just suddenly stop (that too after the update!) It has happened twice already. The battery was more than sufficient when it happened.

  Any ideas?

  Kind regards

  Harris

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• updated 7.3 to 10.0.1 on iPhone iOS 5 in the messages, I can't put the phone in a horizontal position in order to enlarge the keyboard more. a field opens with the font script styles and I can't get off my screen, to get at the larger keyboard.

  I just upgraded my iPhone iOS 5 7.3 iOS 10.0, now when I use my e-mail, I can place my phone horizontally to get the larger keyboard is no longer and use my thumbs (many more fast typing). Now, I get a "field" with scripted, for styles to close since fonts. There is an icon of a 'keyboard' if I type nothing happens. Clues? your help will be greatly appreciated.

  Bill

  Pressing this icon small keyboard should work (done on my iPhone 7). Until someone answers with more information, another thing you could try is to open the keyboard when the phone is vertical and then put it too horizontal.

• How to connect the system android and ios?

  my main project is to put a link or for communication between the system android and ios. the controls I should know?

  If you want assistance please provide details as to what you're trying to do.

  Writing an effective question of communities of Apple Support

• Configuration of the Airport Extreme problem and Vigor 120

  Hi all

  This is the case, I have vigor installation 120 in Bridge mode with my airport extreme with settings pppoe settings of my ISP of vpi/vci: 8/35 pppoe/llc adsl2 + login and password, when the force as a router configuration, there worked perfectly, but in Bridge mode has managed to establish a PPPoE to pc but when the connection with the airport no luck I got an invalid ip address and orange light flashing.

  I have the latest in airport and vigor firmware and I'm doing a powecycle reboot after each change.

  Here are the settings in effect 120

  

  

  Any help would be more than welcome

  It's sad to say THAT PPPOE on the Apple is not reliable.

  I have the same problem... I can't use routers Apple with PPPOE on my modem in bridge... regardless of the brand.

  PPPOE is a bunch of variations... PAP or CHAP for example... and the number of... repeated attempts time between repetitions.

  Apple offers zero... whether it's no control... they are all available right now to find out what newspapers or.

  I had to simply replace the Apple router with another router... any other router seems to work fine... It's just the Apple that failed on me...

  I tried with several different Apple routers using all the old firmware, at latest... all fail. So I guess it's less coherent.

• I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

  In addition, you can try to reset your settings.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings