The 6s battery first charge

Similar Questions

• x 260 internal battery first - is this normal?

  New Lenovo x 260 and I love the machine. I noticed that the system uses the internal battery and back to 5% before moving on to the external battery. This behaviour seems contrary to what is said in the application of arrangements of Lenovo, which indicates the replaceable 3 or 6-cell (I have both) will be unloaded first, then the internal battery is dead. She then imposes in reverse order - internal battery charge first, then the external battery.

  Is this something that can be adjusted? The system will occasionally use the internal battery first? I use only genuine Lenovo external batteries and both are healthy and get used and invoiced correctly.

  The only thing I can imagine I did to create the problem is to reinstall the system image of a recovery disc before you do anything with the machine, I have created. The story: the moment I started in Windows 10 for the first time at the reception of the new machine, I created a recovery media. I formatted the machine and tried to install Windows 10 Professional using a series I own, but I encountered a problem of activation. Accordingly, I gave my effort to run a clean install, started the recovery USB key I created and restored the system to the State from the Lenovo factory with all the drivers installed and the OWL wallpaper of Thinkpad and so on. So, I use the system with an original image.

  Or is this normal behavior?

  Thanks in advance.

  In response to customer relationships that discharge of internal battery before the external battery, instead of the external battery first as expected, on X 260 of discharge ThinkPad, Lenovo has presented a solution via the BIOS update.

  CHANGES IN THIS VERSION

  Version 1.21

  [Problem resolves]

  -Fixed a problem with the battery charge/discharge sequence incorrect.

  BIOS v. 1.21 can be downloaded here: http://support.lenovo.com/us/en/products/Laptops-and-netbooks/ThinkPad-X-Series-laptops/ThinkPad-X26...

  Thank you

• Qosmio G20-106 - exchange of the CMOS battery

  Hi all

  I need to change the battery CMOS of my G20-106. Is this possible without having to disassemble the whole laptop? Where is the battery? Thank you for your help.

  Best regards

  unclescrooge

  Hello

  No, as I know it is not possible to do
  As far as I know the CMOS is welded somewhere on the motherboard and you would need to disassemble the whole laptop. This can be really, really painful procedure.

  But why do you want to remove the battery?
  The CMOS battery is charged and it should be possible to load it again.

• Impossible to use the extended battery T420 extension

  It is quite disconcerting to have the laptop stop and be empty when the battery life indicator said there is more than 6 hours of life left.

  My T420 has a senior 55 + and 27 ++ long battery life.  If the main battery is used to power, when the main battery reaches 0%, it will fail to pass the long battery life and die.  It's not only to stop, it will stop.  Windows don't like this.  If the computer is using the extended battery for power, it can switch successfully to the main battery when the battery reaches 0%.

  There seems to be no way 'approved' to force the first laptop using the extended battery.  I got this laptop a few weeks, but in my experimentation, the laptop uses preferably the battery with the lowest percentage of all.

  For normal use, long battery life load profile I programmed to stop at 95%, this will get the laptop started on right stack when the two are connected, but not help if I'm out and on the use of the main battery and want to extend by adding the long battery life.

  The only method I found to force the laptop to use the battery when the main battery is low-capacity must simply remove the main battery.  Of course, to do this, I have to either stop the laptop or the put it hibernates in.  Then, remove the main battery and attach the long battery life.  Reboot the laptop.  So far, I have no problems with this method. The laptop is perfectly happy with just 27 ++ battery attached.  But if I'm going to pass the batteries, I might as well have an extra 55 ++ lying around and waive the 27 ++.

  Would be nice if Lenovo could provide instructions or a software patch that would allow me to tell the laptop to use preferentially the extended battery as soon as it is available.

  The way the system is designed, it's that you won't always unload the 2nd battery first, not the main battery. If this is not the case, check the switch on the 2nd battery. Make sure it is in the position "on / green.

• Satellite click Pro P30W-2B - the docking station battery not charging

  Hello

  I have a Satellite click 2 Pro 30WB; at first, I didn't have any problem with this product, but a few months does not charge the battery of the docking station. I am able to load only the Tablet battery.

  Can someone help me?

  Thank you

  Hmm... If this problem has appeared since the first day of the purchase, the home question battery might be related to battery failure.
  In this case, you will need to contact the service to fix.

  But just one question: it's your BIOS up-to-date?
  Check the update in the station of service and if available new version of BIOS; try to update the BIOS to the latest status.

• Satellite L850-150 will stop even if the battery is charged

  Good evening

  Since I've upgraded to Windows 10, the following occur:

  The laptop battery stops unexpectedly without warning the minimum level, even if the battery is charged
  I bought a new battery and it is exactly the same as the previous battery

  What can happen?

  Best regards and thank you

  More details
  The first OS is Windows 7
  I created two partitions
  In the second partition, I installed Windows 8
  After awhile, I installed Windows 10 on Windows 7 and also installed 10 Windows on the partition of Windows 8
  In the two bulkheads made
  The computer turns off when you do not have the power cord plugged
  Earlier in Windows 7 and Windows 8, it did not
  Help, please

• Satellite A30: when the adapter is connected the battery stops charging

  Using a Satellite A30 about three years. Recent problem is that while the power adapter is plugged the battery stops in charge, the orange battery indicator turns off.

  If you look at the power management utility battery poweer bed On Line, % of discharge meter

  So he can load either, I have to turn the machine off (completely or to hibernate) then remove the power cable and reintegrate them, then the battery light turns on. When restart the battery will begin charging for a while, and then for no apparent reason in defence start.

  If left reaches 0% battery - the machine continues to operate when the power cable is connected so its power do ok, but of course starts to beep when it goes below 10%. To get it going again, I need to stop and restart etc.

  I have checked the bios and have the latest version.

  I cleaned around the outlet heat exchanger and deleted all the fluff.

  I use a generic adapter that the original does not, but as far as I can tell its working normally.

  All thoughts

  Richard

  Hi Richard,

  Your problem is caused by a bad connection where the power adapter is connected to the Jack at the back of your laptop. A slight movement of the cable causes a momentary loss of contact and electronics of management power in Notepad is deceived into beleiving that the battery is no longer available, in which case when the battery goes out and the laptop will return to the battery power even if the AC adapter is connected. As you have already discovered, turn off the laptop will be all back to normal.

  I have experienced the same situation with my A30-141 and have not yet found one solution other than to resort to power off the laptop computer, but I managed to avoid the problem occurs by pinching the cable ca at the back of the laptop so that there is no risk of power do not connect the bending in order to trigger the problem in the first place. This has been a remarkable success to date, and I didn't have a problem for several months now.

  Obviously, it is not a "cure" for the problem but the frustration it causes.

  Kind regards

• S3000-514: how to make the secondary battery to unload everything first?

  Hello world!
  After I ve managed to charge my secondary battery on my laptop (see my previous announcement), I'm now getting another "strange" problem
  With my two batteries in and on the battery the first battery to discharge is the main battery - and not high school!
  This leads to a problem: when I want to change the secondary battery with my combo player, I'm not always have enough power in my battery.
  I have found how to make the battery discharging first of haven´t.
  Can anyone help?

  Hello

  Unfortunately, it is not for me and as much as I know it can not be changed. Probably the electronic power supply is configured to run on this path. Have you tried to remove the main battery and work by simply using secondary? What happens in this case?

• Accidentally disconnected Macbook Pro on the first charge

  I've been advised to load my new Macbook Pro 13 "8 hours for the first charge. I plugged it in for about 5 hours and the charger got accidentally disconnected from my mac but I've not noticed until 3 hours later and then I immediately plugged my charger in!

  Something will happen to my computer? Which would cause a detrimental effect for the performance of my battery?

  Thank you!

  Ellenayoung wrote:

  Something will happen to my computer? Which would cause a detrimental effect for the performance of my battery?

  No, nothing will happen for her and she will not affect the battery or the computer in anything.

• EliteBook 8570p: battery not charging - even if the computer appears to see that it is plugged

  I have not found a suitable solution for this (yet).

  As a backdrop, I just got my laptop under warranty returned by HP service for a problem with booting docked impasse.

  They replaced the motherboard and the hard disk. I kept battery with me, so he did not travel to the service.

  So I turn the computer to the test, to see if the boot at a standstill problem was software related, and I noticed that the battery does not load (network port is also not reliable, but maybe it's a different problem).

  I tried the fix posted elsewhere where I uninstall the ACPI compatible batteries from the Device Manager. But that did not work.

  This produces the same, whether the laptop is docked or connected directly to the power:

  1. the power low battery icon is displayed and AC plugged in.

  2. the battery charging light is orange.

  3. once I start first the power icon is animated, clearly showing that the battery is charging

  4. If the mouse on the icon of power, it lists that the battery is 23% (plugged in and charging)

  5 but nothing changes. hours later the battery is always on display at 23%

  6. battery works. I can run off the battery voltage.

  7. the power supply works. I can run off AC only (with battery removed)

  Thank you

  The saga has been longer than that. I got a new battery, but the problem persisted. I actually managed to charge the battery and it meets the same test on a laptop.

  I called HP support and they suggested I have test the battery in diagnosis mode F2/system, outside of Windows.

  The same battery would pass or fail depending on the State in which was the battery.

  In any case the laptop wouldn't load any stack - on a platform or directly connected.

  I could get a failure of the battery if the battery was less to, say 85% and the yellow light blinking load (load error).

  I ended up sending the laptop in for repair - they think case somehow got distorted... but I'm not sure what they actually lair.  The motherboard was already replaced for other reasons.

• The remote control comes charged out of the box or it must first charged?

  The remote control comes charged out of the box or it must first charged?

  It is usually quite busy, mine was about 85% when he arrived. It's a question about the pre purchase or you have a problem with your remote control works not.

• Laptop stops when the power cord is not plugged in but the battery is charged to 100%.

  just happened this morning.  accidentally deleted the decision-making of the laptop.  and the judgment of the laptop.  weird because this has happened before and no problem.

  However, this phone wouldn't turn.  until I have plug AC laptop would be the power of the laptop on.  I checked the battery is the meter displays 100% charged.  in windows, it is 100% loaded.  but as soon as I unplug the laptop, the computer shuts down.

  I have windows 7 and my computer is HP dv6t Quad Ed.  any help would be much appreicated.

  Plug the power adapter. Connect to Windows and open the HP Support Assistant perform the battery test. Post your results here.

  If you have the most recent UEFI (v 5.1 or higher) environment installed-> press-> power button press the ESC key to call the menu of boot - select F2 the System Diagnostics-> PC HP Diagnostics UEFI material-> select components-> battery Test tests.

  

  Post your results here in your thread.

  Best regards

  ERICO

• Tecra A7: When the battery starts charging?

  Under what title did the Tecra A7 specifications battery start charging itself (when on a domain controller)?

  Hello

  In my knowledge ff as the AC adapter is plugged in the battery will be charged all the time.
  There is no level battery charge or does not charge.

• Do not charge the external battery ThinkPad T440

  Hello community,

  I use a T440 with WIN8.1 machine pro, but for some reason any external battery stopped charging. This laptop is only 3 months old Lenove send me a brand new, but the result was the same, the charging symbol appears on my screen when restarting the machine and shrotly after completely stops. Now, I had my internal battery pack has changed and once again, no improvement. If any of you had a similar experience and can suggest a remedy?

  just had an IBM engineer on the site and that they have was change the motherboard of the laptop. Frankly, nobody seems to know how or why the machine won't start. Since the new motherboard was installed everything seems to be in order and work very well.

• battery not charged after the power failure

  I have a HP ENVY 14-2050ed Beats Edition Notebook PC

  I was a shortage in the supply cable which caused my HP down.

  After restarting the battery wasn't in charge more. The laptop works fine when it is connected to the (new) cable, but battery does not charge and the laptop does not start with a charged battery.

  I ran all the steps at http://support.hp.com/us-en/document/c00259897 , but he has not found the cause of the problem.

  What type of repair is required to fix this problem?

  Can you recommend a repair center in the Netherlands, or near Rotterdam?

  Thnx

  Onno

  Hello

  I replied to the other thread on this topic:
  http://h30434.www3.HP.com/T5/notebook-hardware/battery-not-charged-after-power-shortage/m-p/4257042

  Thank you