The A60 - 157 satellite (satellite) product recovery disc

Hi all!! Can someone please explain to me how to repartition the hard drive before or during a recovery of proceeds from the disc that came with the laptop. I went in expert mode (option 2) but cannot figure out how to re-partition. Just had a thought, would it be like 98 where you run fdisk from the command prompt. Any additional help would be appreciated. Thank you
At soon ESD

Hi Edd

Please use the advanced search option and put 'expert' as a search term. You will find a large number of subjects with a detailed description of the recovery expert mode procedure.

Good luck!

Tags: Toshiba

Similar Questions

  • Is the standard Satellite A200 product recovery disc?

    It is very regrettable that after reinstalling the product of my Satellite A200 recovery disc, the language is now in Deutsch. Since I got the recovery disc to the center of Toshiba for a replacement, do you not thank they will be replaced by an English version? If so will be affect the entire notebook in its performance, or perhaps a program previously connected may have disappeared or missing.

    The product recovery disc is standard for the same unit of model because there is that no product key required?

    SP1 = Service Pack 1. This package has been designed by Microsoft and contains all useful and patches hotfixes. All this is designed to repair the operating system and make it better and safer to be used again.

    At this time you should not install SP1. It may happen that some problems may occur after the installation of SP1. Toshiba didn't start load SP1.

  • Satellite A210 - 4 1: Winload.exe problem after having used the product recovery disc

    Hello

    I could really do with some help here. I have a PC laptop Toshiba Satellite A210 - 1 4. Disk partitioned with Vista home premium service pack 4.0.

    Last night, I used the product recovery disc supllied with the laptop in an attempt to restore its initial configuration.

    and the end of the procedure, I find myself with a prompt cmd with X:\windows\system32\cmd.exe in the high bit blue box indicating:

    Error: imageX could not apply vista F:\05993xsp.swm Index 2 of ODD to C:\!

    Press a key to continue. Box disappears then an administrator: X:\windows\system32\cmd.exe in the top blue bit indicating:

    waiting for ODD vacancies...
    STRANGE drive f: loan.
    Look for support in the F: drive...
    Failed to initialize the raid class.
    No RAID - continue normally...

    X:\Windows\System32 >

    Now every time the laptop trying to restart it just comes up with the error message:

    CANNOT START WINDOWS. A RECENT HARDWARE CHANGE OR SOFTWARE MAY BE THE
    CAUSE
    FILE: \WINDOWS\SYSTEM32\WINLOAD. EXE
    STATUS: 0XC000000E
    INFO: THE SELECTED ENTRY COULD NOT BE LOADED BECAUSE THE APPLICATION
    IS MISSING OR DAMAGED

    Below I have then have the possibility of esc or continue with the same result of the system attempts to restart.

    The recovery disc has no option of repair on this subject.

    need help please, I have no idea.

    Thank you

    Hello

    Looks like something was wrong during the recovery procedure.
    Have you tried to recover the laptop once more?
    If this isn't the case, you should definitely try this!

    You are right; hasn t drive recovery option for the repair because the recovery disk is not the same as a MS Vista drive. The recovery disk contains image files (it s a package) and the files contains Vista, Toshiba drivers, tools and additional software.

    So if something was happening well wrung out during the recovery procedure, you will not be able to repair the installation of the OS, but you need to run it again.

  • Satellite P300 150 - need of the product recovery disc

    My Toshiba P300 150 was delivered today and I mess things up. I got a Toshiba P200 product recovery in the P300. I am not able to get on the desktop, because everything was erased when I put the P200 product recovery disc in the new laptop.

    I'm not able to get the recovery of Toshiba products until January 7, because the site is down.

    I'm so desperate, so if anyone has the same laptop, I would be very grateful if you would be able to make a copy of the recovery of product, just send me an email if you are able to help.

    Hello!

    Why you insert the recovery since a P200 laptop disk? When you get a Toshiba laptop it s all preinstalled Windows, drivers and tools.

    It s a user to user forum and I think that it s not allowed to copy these disks. ;)

    But you can also get a new drive to an ASP (authorized service provider). Here you can find one:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

    Good bye

  • Satellite L40 crashes when you use the product recovery disc

    When you use the product recovery disc to repair my laptop it hang after language page display.

    Select meaning when it displays the language, I select language and press next, no action more far there... I can move one pointer.

    Some may help how to solve the problem.
    Thank you

    > Select sense when it displays the language, I select language and press next, no action more far there

    Perhaps, your recovery disk is corrupt. What happens if you try with Windows disk copy?

  • Satellite L30-10 X: how to create product recovery disc

    How to create a product recovery disc and use it to clean my computer so it was as if it was brand new, once again?

    Hello

    You have an original Toshiba Recovery CD?

    If this isn't the case, then you can order of ASP (authorized service provider) in your country.

    However, you can create a clean image to a 3rd party like Norton Ghost utility application.
    This software would be useful to create a bootable CD won, or just an image file that can be stored on another partition.

    However, if you want to restore you laptop, and then reinstall the Windows operating system.
    All the drivers of Toshiba important and tools are on the European driver Toshiba page.

    Concerning

  • Reinstallation of the product recovery disc DLL file

    I recently reformatted my hard drive and reloaded Windows XP Home Pro on my M100 Satellite (PSMA0A) from the product recovery disc.

    Everything is OK except that I get an error 'Unauthorized repositioning of system DLL' whenever I start the computer?

    The exact error message reads;

    RTHDCPL. EXE, DLL unauthorized system

    "The user32.dll system DLL has been moved in memory. The application will not work correctly. The move took place because the dll C:/WINDOWS/system32/HHCTRL. OCX occupied an address box reserved for windows system DLLS. The vendor supplying the DLL should be contacted for a new DLL.

    I contacted Toshiba who suggested I need to set up a new user account and then delete the original user account, and this should solve the problem.

    .... I did as suggested, although this has not solved the problem...

    Any suggestion please

    It will be nice if you can post the link.

  • Could not load the product recovery disc

    Desperately need to use the product recovery disc but the disc will not load. My computer recognizes the drive but says "this disk or device contained more than one type of content, want you want windows to do" and then gives me the option to open with real player, Media Player, print, slide show or nothing. Why usually just charge it?

    I need the product to work recovery disk I my laptop turns itself of every minute or so. I get a blue screen that is visible for a split second, and then it restarts.

    I restored the system to a previous point, but nothing helped. My only option is to use the system restore.

    Can anyone help?

    Hello

    I'm not sure if I understand you doubt correct but must boot from the Toshiba recovery disc. I put t know what laptop you have exactly, but go to the start menu and select the CD/DVD drive to start. After that, follow the instructions on the screen.
    Check this box!

    If it doesn't work you should try to clean the lens of the drive. Therefore, you can use a microfibre cloth.

  • Equium A100-027: need product recovery disc

    Good afternoon

    I was wondering if you could help me at all the

    My A100 became really slow and unstable. So decided to use the product recovery disc, but found to be scratched.
    I tried to use a disc repairman but have had no joy.

    I have the original product recovery cd and good purchase is anyway to get a new drive of toshiba.
    The laptop was purchased directly from curries and is one year old.

    Any help would be appreciated.

    Thank you very much

    Hello

    Have you seen another thread here in the forum about the purchase of restore CD?
    I m what you did!

    So the solution is very simple! You must contact the service provider allowed in your country and to order a new recovery CD Toshiba laptop you.

    All that s!

  • No option to create product recovery discs

    I started the application of "create rescue and recovery media" on my new T500, but the option to create a set of product recovery discs isn't available.  According to this doc from Lenovo , this option is not available if "your system has already created a set of recovery media." But I did NOT create the whole.  Is it possible to get this option and create product recovery discs?

    My bad.  The support doc I linked should be somewhat outdated. I did notice that there are actually 2 different applications on my T500: 'Create recovery media' and 'Create the product recovery media.'

  • I need Satellite CD or product recovery disc

    Hello

    I have my laptop satellite P20 S103 of pc world 3 years ago. But my pc was last on the poster a store. There was a missing disk. The missing disc was the recovery of the product disc. Now I need this disk to fix my laptop.

    Can someone help me please? Someone can it send this software to my email address or someone can give me the address of this site to download this software product recovery software?

    This ghost image can be sent by e-mail. Please contact Toshiba authorized partner in your country and ask them if they can order one for you.

    If you need address please visit http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  • Satellite P300 - - what are product recovery discs contains Vista?

    I want to reformat my laptop, it's a Satellite P300... many things does not work more IE: System Restore and corrupt c drive

    (1) would be to reformat my laptop to fix those problems?

    (2) 2 discs "TOSHIBA satellite p300 etc. product recovery media and 64-bit windows vista ulimate said.

    Is that mean they contain vista? (vista came pre installed

    (3) should I make a copy of the PRODUCT ID series vista on my system menu screen

    (4) how would these discs...

    I you thankful if you could help, its a super computer

    Conduct research on how to operate the discs, just want to make sure that they contain vista

    > 1) would be reformatting my laptop fix these problems?
    Probably yes

    (> 2) 2 discs "TOSHIBA satellite p300 etc. product recovery media and said windows vista ultimate 64-bit.
    As far as I know that P300 was equipped with HARD drive recovery and Vista 32 bit was preinstalled. There should be an option that allows to recover the laptop using the recovery of HARD drive option. Press F8 when the laptop starts up. Then choose fix my computer and start HARD drive recovery.
    This should set the machine to factory settings. Finally, you can create a recovery disk using the Toshiba recovery disc Creator called preinstalled software.

    (> 3) should I make a copy of the PRODUCT ID series vista on my system menu screen
    You can do this, but as far as I know the Vista on the Toshiba Recovery disk is already enabled and you don t need the series keys.

    (> 4) how would these discs...
    Usually you have to boot from that disk

    PS; For more details you should read the user manual and must read the discussions in this forum!

  • Satellite M100 - recovery disc reboot after loading ramdisk image

    Hello world

    I have a Satellite M100 (bought mid-2006), 512 MB RAM, 60 GB HDD, Intel CPU T2050.

    I decided to have a cleaning and use the restore disc to return the laptop to factory settings, and then reinstall only what I really wanted.
    I had this done yesterday, I had forgotten something, then he ran again about 4 hours later.
    The first time that the restore worked, now it reboots once the progress bar reaches full when he says "Loading RAMDISK Image".
    After the progress bar reaches full, the mouse pointer appears for a few seconds then restart the computer.

    Nothing has changed with the hardware or BIOS, and what is on the HD should not have any effect because I am booting from the DVD.
    Can someone please help? I am at a loss to explain what happened in this interval of 4 hours.

    Thank you

    Hello!

    I put t know which causes the problem too because I m not an expert, but sometimes I can read in the forum, you must delete all partitions before using the recovery disk.
    You can do this with the Microsoft disk for example. Just boot from it and delete all partitions. After that, restart and try to use the recovery disc.

    I put t know if it helps but you can give us feedback. :)

    Good bye

  • Can not turn HARD drive restore or create the restore on Satellite A135-S4727 disc

    Hello

    I have an A135-S4727 (Pentium dual core, 2 GB of ram, windows vista, 160 GB HDD).
    Recently, I decided to use my HARD drive recovery funtion to restore OTB ' cos I wasn't satisfied
    the way I use my hard drive.
    My system did not come with a recovery disk and recovery disc creator software (I checked it when I arrived but)
    has been re-insured by the fact that the hidden partition has been and is still intact)
    I just thought that I would start from the hard drive recovery console, whenever I needed.
    I tried to do this for always (now pressed zero, hit) but it boots to windows in any case.

    I am so angry and frustrated rite now ' cos I am out of warranty and do not know why I should come on a forum to find a way to restore my laptop.
    I googled the web for 2 days now and nothing other than similar complaints found...
    Toshiba... (X-)
    The right and the ability to restore its system is a given... (unless you plan to charge us a pc falls down for reasons every time you guys don't even know most of the time)

    Please someone end to this nightmare and tell me what to do and how...

    Boyfriend sorry but to be honest I put t understand you complaint;
    The newest series of laptops is not delivered with the recovery disk but is equipped with Toshiba HDD recovery option.
    This option can be used to retrieve the laptop computer from the HARD disk, and there is also an option to create the recovery disk.
    This recovery disk can be used if something goes wrong with the HARD drive or partition from the image on the HARD drive.

    It s highly recommended to create the recovery DVD!
    And this info is in the manual of the user who is always pre-installed on the laptop!
    I also found this info here in the user manual that can be consulted online on the Toshiba page we (the Satellite A135-S4727 is a laptop in US)

    Check it out here * 56, page of the user guide: *.
    [Satellite A135-S4727 Manual: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1757708& rpn = PSAD0U & SelCategorie = 3 & selFamily = 1073768663 & odel selM = 1757708% 7CPSAD0U #]

    Here you will find details how to create the recovery disk.
    I put t know how you manage a unit bought new but if I buy a new device, then the first I do is consulted the user manual that comes with this device.

    In any case; I think you can order a new disc of recovery of the ASP in your country

    Good bye

  • Nothing is happening with the product recovery disc

    I dropped my laptop yesterday and now it will not load Windows. I tried 'Start-up launch repair' it says Windows is loading files, comes up with the screen of Microsoft Corporation, then will just a black screen. I put in my product (Windows Vista) recovery disc but nothing don't be going on I also pressed F12 and some CD/DVD, but still nothing!

    Would appreciate any help

    Thanks in advance

    Hi nhannan,

    What model of laptop you have exactly?
    Have you tried to boot from another drive? Perhaps the recovery disk is scratched and t can be read more.

    You should also check if the CD/DVD drive is properly recognized in Device Manager and try to load the BIOS default settings may be it helps ;)

Maybe you are looking for