The adapter wireless HP 802.11 b/g do to start

Similar Questions

• How to use the adapter wireless Satellite C660D?

  Hello world!

  Crazy us looking for the adapter wireless Satellite C660D-164... is there an integrated? or do I have to buy an external? Can not know how to set up a wi - fi and bluetooth connection. The manual is not descriptive.

  Installed all the drivers form the site.

  Pleas help ASAP.

  As far as I know all the portable toshiba have too much especially the bluetooth and WIRELESS network card.
  Use of WLAN is very simply. Thing the most important ist wireless network adapter must be installed and activated correctly.

  In the document s user manuals, you can find good description how to use the WLAN.

  The question is: do you use your laptop with the original operating system preinstalled that you got with it or you use own preloaded?

• Could someone tell me that I have a laptop that is compatible with the adapter wireless Athreos in it and it catches an unsecured, network shown as next (automatic) for the SSID (network name). Please tell me how to connect...

  Could someone tell me that I have a laptop that is compatible with the adapter wireless Athreos in it and it catches an unsecured, network shown as next (automatic) for the SSID (network name). I tried parameter as point of access, AD-hoc, Connect automatticaly etc but will not connect... Please tell me how to connect...

  Hi Sumit and thanks for posting.

  Your Athreos has never connected? If it has connected then it not only connects it to insecure networks? Also after can trying to connect you do the following?

  Start, run, CMD, OK to open a command prompt:

  Type the following command:

  IPCONFIG/ALL

  [Note that there is no space between the oblique and ALL bar].

  Right click in the command window and choose Select all, and then press ENTER.
  Paste the results in a message here.

  I hope this helps. After the back if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• No option of LLTD protocol to the adapter wireless Broadcom 4322AG

  My HP laptop comes with a wireless integrated Broadcom 4322AG adapter. I try to activate the network map so that I can share files with my desktop (XP). I tried to activate LLTD in the adapter, but I don't see the Protocol in the Properties window. When I click on "View full map" (from the connection network and sharing the control screen), I get the following message under my device "Windows cannot start mapping on the adapter. Please make sure that the adapter is connected or activated. It's the adapter used to connect to my network. I updated the driver to the latest version of HP, but I still don't see the LLTD protocol.  Appreciate all the help/pointers on this.

  Thank you

  Hi vraja_ak,

  If you do not see the LLTD protocol in the network map in windows vista, you try adding the LLTD protocol in Network Management window.

  (Control Panel must be in Classic view)
  1. Start menu/Control Panel/network and sharing Center.
  2. click on manage network connections.
  3. right click on Local area connection.
  4. Select Properties.
  5. click on Protocol
  6. in the next window, click on Link-Layer Topology Discovery responder, then click install to install it.
  In the same way, do it for Link-Layer Topology Discovery Mapper of e/s Driver

  Now, check if the option both are available in the network card.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to install the adapter wireless network in Satellite Pro A10

  I'm trying to set up a wireless connection with my Satellite Pro A10. I thought it was active wireless, but when I switch the wireless switch, no light comes on and there is no card listed under network adapters wireless (so I guess not).

  Is it easy to install a wireless adapter (i.e. can I do it myself or I must be done by a professional)? Can anyone recommend what card I should by (or any other that I should avoid)?

  Thank you.

  Hello

  According to the specification of the specifications your A10 Pro Satellite is WLAN ready. In notebook specification it has listed two compatible WIFI cards:
  PA3212U-4MPC (Agere 802. 11b) and PA3273U-2MPC (802. 11a / b).

  I don't really know if you can use some faster wireless network cards with the g standard. You may be lucky and someone will post here results update WLAN card.

  I'm not sure 100% where the WLAN slot is placed but check it please under the lid placed close to the battery.

• Try to install the adapter wireless network on s5503w

  Can need help, someone tell me the solution for my problem on the Pavilion Slimline s5503w wireless network adapter?

  It has an operating system of windows 7, works in 64-bit, 3 GB of RAM, proc AMD140 to 2700 mhz. Have you tried three different suppliers of network adapters wireless Rosewill RNX-N180PCe pci Express 1, TP-Link TL WN781ND pci express 1

  and now finally, Netgear WG111v3. I just want to get the wireless desktop. I have a wireless G of Linksys WRT54G Router, D-Link print server currently works wireless. I have Zone Alarm Firewall and Avira AntiVir Personal Antivirus.

  Yes, windows update is turned on and it's all good. The problem is once the driver software is loaded, then the hardware is installed. Windows never displays the wireless network adapter on any able to pick up a wireless transmitters. The error I get is: an unexpected error has occurred.   Seek to deepen, I read that he was saying that Windows could not set the IP address.

  This would indicate that my software driver wireless network adapter did not work. Yes, I have installed internet access and it indicated on the Internet site, that the cd was the most recent driver so no additional download was necessary, use the cd to install the driver. In addition, went to the Windows 7 compatibility page and the netgear WG 111v3 that my current card is authorized for 64 bit. So, where should I go from here? Oh, yes the s5503w recognizes the hardware in the device mgr. He sees the driver software, it's like something is blocking the final stages of obtaining information IP/MAC of the wireless network adapter.

  Hello:

  I would say that there is a problem with the 3rd party firewall.

  I had the same network Netgear USB v2 card no less, and it works well with my setup of W7 64 bit on my HP PC.

  I recommend you uninstall or disable the ZoneAlarm firewall.

  W7 features of a firewall, your router WRT54G has a hardware firewall. I had one of those too, but moved to the E2000. I assume that your wireless network is secured in some way.  I think that this is your problem.

  Did you know that you can get a free antivirus/antispyware software from Microsoft that works just great?

  Here is the link:

  http://www.Microsoft.com/security/PC-security/MSE.aspx

  I think that it would cause less problems with my installation of other free software system. I have yet to be disappointed.

  Paul

• Cannot find the adapter wireless - Satellite A100-467

  Hello

  I have Toshiba Satellite A100-467 running Windows 7 on this subject.
  Yesterday, I put my laptop in hibernation and when he woke up wireless network did not work.
  I checked the Device Manager and there is no adapter available wireless network, seems it is not listed by the system.

  I tried to download and re-install the drivers of network wireless, but without success.

  Any suggestion?

  The problem even if you restart your laptop?

  By the way: is your notebook supported for Win7? I mean did Toshiba offers all the drivers needed and other things?

• using the adapter wireless to the guest operating system

  I use the free vmware server console version 1.0.9 build-156507.

  It is installed on a laptop with Vista 64-bit OS.  The host has a physical and a wireless network card.  After the installation of vmware, he sees only the physical card.  I tried various suggestions, but I can't seem to he can use the wireless network card.  Mainly because I need clck 'ok' or ' the press apply.  The 'ok' button is always grayed out and I don't see a button for "press apply", or "apply".

  Does anyone have a solution?

  Hi rchandba,

  You must run as administrator vmware server to make the changes in the network

  Right-click on vmware server build-156507 icon console version 1.0.9 and you will see "runas administrator" and click that to run

  If you enter administrator password

  Then you may be able to change the network settings means that

  'ok' and 'apply' will be able to select

  It should work, or if you need help answer

  Please provide points if it is useful

  Concerning

  Prakash

• HP envy 15t ae - 100 CTO: I would like to upgrade my adapter wireless adapter dual band. Who would be the right one?

  I currently have the adapter Wireless WiFi Broadcom BCM43142 802.11 b/g/n 1 x 1 in my envy 15t ae-100. I want to improve my adapter to a dual band card so that I can use my 5G network. What adapter would work for my laptop? I would appreciate your help.

  @Sam_Rajbhandari

  Those are your 2 options.

  Intel Dual Band Wireless-AC 7265 802.11 ac 2 x 2 WiFi + BT Combo Adapter (no vPRO) 4.0	793840 005
  Intel Dual Band Wireless-AC 3165 802.11 ac 1 x 1 WiFi + BT Combo Adapter 4.0	806723 005

  Your manual here.

  http://h10032.www1.HP.com/CTG/manual/c04691689

  REO

• Working Group stopped after the installation of the new wireless router

  My working group stopped working after the installation of the new wireless router.  Router was switched were to move from DSL to fiber optic.

  I have a very simple home with two laptops working group, the two are connected with a wireless router.  A PC is running XP with the updates and service packs; the other PC is Windows 7 Home premium.  This working group was running without problems for a few years.  The Working Group has been used to share files between two laptops.  Internet access was through the DSL wireless router and print was with a wireless printer, without going through the working group.

  I had my DSL set out to free fiber optic last week, which meant that a new wireless router has been installed by my local phone company.  Internet works fine; wireless printer works.  The working group no longer works.  When I try to connect from XP to Win7 and I click on mode workgroup computers, I get this message:

  WorkGroupName is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

  The network path was not found.

  I tried to create a new working group, the new name for the same workgroup on both machines, but this did not help.  Working groups are supposed to be simple; This seems to be a problem on the new router - telco tech support says that nothing is stuck on the router. I don't believe them.

  What version of XP you use (Home or Pro)?

  Can you access the Win 7 a XP computer?

  You have identical accounts, passwords on both computers?

  If all that was done was to change routers without making any changes on the computers, the most likely cause of the problem is a third party (other than Windows) firewall on at least one of the computers.  Being by default, a router automatically assigns IP addresses to computers on your local network.  Different brands of routers, but use different address ranges.  For example, Cisco/Linksys routers typically use the 192.168 form addresses. 1.1 with 192.168. 1. 254, while the D-Link routers typically use 192.168.1 to 192.168.0.0. 254.  A firewall configured to allow only the first IP range blocks communication to the scope of the latter.

  So... What is the name and version of your anti-virus program?
  What other security software is installed?

  On every laptop computer, open a command prompt window
  for XP: start > run > cmd > OK
  for Win 7: type cmd.exe in the search box and press enter
  In the black command prompt window, type the following command and press enter
  ipconfig

  Please provide the values for the following for the adapter wireless of each computer
  IP (XP)
  IPv4 address (Win 7)
  Default gateway

• Windows 7 will not detect THE routers wireless, including mine.

  Windows 7 will not detect THE routers wireless, including mine. I inserted the cd of restoration of the system, and after that he picked up no internet. No, even if I connect it with the wire! Help!

  Hello

  Thank you for contacting Microsoft Community.
  Is properly installed wireless adapter driver?
  Go to start-> type devmgmt.msc-> press on enter. In the Device Manager window, expand network adapters. You should be able to see a list of network adapter as Ethernet, Bluetooth, etc. Make sure that you can find the adapter wireless from the list. If so, double-click it. Properties windows will be open. On the general tab, under device status, if it shows that the device is not functioning properly, please remove the case, locate the wireless network card and make sure the connections of antennas are coneected correctly. If even a connection is not properly connected or damaged, you cannot connect to any WiFi network.
  Response if the issue is not resolved.

• Whenever I start the computer I lost the wireless capability. I get error WZC "871122". I then start the automatic Wireless Configuration service. Is there something I can do if I can't do it every time that this?

  Continually 871122 WZC error.

  Hi Shane,

  Looks like you have (or had) 3rd party software that previously managed your wireless connections, so casting service windows does not start automatically.

  See the following Article in the Microsoft KB, see if it suits it for you;

  http://support.Microsoft.com/default.aspx/KB/871122

  More precisely:

  If your computer or your wireless network card came with its own wireless network software, follow these steps:

  1. Click Start, click run, type ncpa.cpl and click OK.
  2. Click on network connections.
  3. In network connections, select your wireless connection, and then click change settings of this connection.
  4. On the wireless networks tab, click to select the Use Windows to configure my wireless network checkbox.

  To start the automatic Wireless Configuration service, follow these steps:

  1. Click Start, click run, type %SystemRoot%\system32\services.msc/s, and then click OK.
  2. Double-click Wireless Zero Configuration.
  3. In the list of Startup type , click Automatic, and then click apply.
  4. In the Service status area, click Start, and then click OK.

  Let me know how you go.

• Toshiba satellite 2450 s203 does not recognize the atheros wireless network adapter

  Hello!

  I have a toshiba satellite 2450 s203 and a network card wireless atheros integrated - somewhere in the laptop - there.

  However, I am running win xp pro and the Device Manager IS NOT to FIND THE MAP!

  He finds the ethernet card and a 1394 network adapter!

  But not the wireless network card!

  Any ideas? I downloaded the drivers from the card wireless site but without success!

  What should I do?

  Thank you!

  Hello
  The WiFi card is an option for this model for example. It is not included in all machines. You must purchase the correct module for W - lan to work.

  If the card is installed in the machine, you should see a yellow esclamation mark (!) or "unknown device" If you uninstalled hw.
  concerning

  Gandalfwhite

• G6R35UAR #ABA: can I upgrade the card wireless 802.11ac

  Please let know us if it is possible to upgrade the card wireless in my laptop to a 802.11ac card.  A currently installed 802.11b/g/n card.

  My PC is a HP Pavilion 17 laptop.

  G6R35UAR #ABA product name

  Thank you.

  There is no white list. Here is the Service Manual:

  See p. 96

  Manual

  You have the 17 inch model and for the 15-inch model AMD HP actually an AC card. This one:

  2x2HMC AC + BT4 Broadcom BCM 4352 WLAN 802.11 for HP Pavilion 15 AMD computer models available for Windows 7 and Windows 8.1 724935-005

  It is an equivalent spare card sold on amazon.com:

  http://www.Amazon.com/Azurewave-Broadcom-BCM94352HMB-802-11-867Mbps/DP/B00IFYEYXC/ref=sr_1_4?ie=UTF8&QID=1453758370&SR=8-4&keywords=Broadcom+802.11AC

  The card would work for you, but I have to warn you that the installation is no easy thing. It requires extensive disassembly and will jeopardize the warranty. You should not try to install an Intel card as they are called does not play nice with AMD computers. The Broadcom will be your best bet.

  If you have questions let us know.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• I can't get a wireless connection. It comes up with a message saying that the adapter is not connected.

  Original title: Network card

  The laptop is a series of MSI CX600. I can't get a wireless connection. It comes up with a message saying that the adapter is not connected. The wireless adapter is not displayed next to the ethernet card but appears in the Device Manager and when you click the properties of network adapters listed that they all work normally

  Hello

  1A adapter ever worked?

  2 have you installed the disk supplied with the laptop?

  You can check that the installation of the drivers from here:

  http://www.msi.com/product/NB/CX600.HTML#/?DIV=driver&OS=Win7%2032