The airPort Extreme is not working after Firmware update

Hello

At our office, we have several AirPort Extreme or TimeCapsules and one of them (AirPort Extreme) stop working properly after the update 7.7.7

The update itself is supposed to be ok and we have updated all our stations but it only seems to not work. I have hard and factory reset and somehow until last month worked more less, but from this week completely stop working and even reset does not work.

I already ran out of ideas and it seems that Apple wants to charge me $ 30 for a phone call.

Someone at - it a similar case? Should I take on the Apple Store?

Thanks in advance for your help.

You can get it replaced if it is less than one year... That is to say in the warranty or if you have any computer or ipad or apple TV which is covered by the applecare will also cover the airport up to 3 years old if EI is less than 2 years, you can still buy applecare on a product calling... or you can buy say an apple TV and buy applecare for it.

If Apple do not repair them. only, they will be replaced.

Tags: Wireless

Similar Questions

  • WiFi not working after firmware update

    I have MB612 XPRT. Recently upgraded to the version of the firmware 4.1.110.MB612. Sprint.en.US

    After the reboot, the Wifi does not work. It gives "Error" when I try to activate it via the parameter-> & wireless networks

    Can someone suggest to restore the functionality

    https://Motorola-global-portal.custhelp.com/app/answers/detail/A_ID/77896

  • ScanJet 7400c - does not work after firmware update.

    From scratch.

    Windows XP sp3

    HP PrecisionScan Pro 3.02 software installed.

    then add the update of the firmware.8s which is supposed to fix some problems. One being a squeak in certain situations. A problem I had met.

    Otherwise the scanner worked fine.

    now it doesn't work at all. Scanner displays 'error 07' at any time, it is asked to do something. Also get the message scanner could not be initialized Scanner not found)

    What really bothers me is that it worked before the updates.

    Now, nothing.

    I tried to reload the updates, then tap, disconnect, restart the process.

    Is the Junk to scan?

    Read before:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=sj678en & LC = on & DLC = in & CC = US & Product = 59553 & os = 228 & lang = in

    Title:

    ScanJet 7400 c / 7450c / 7490c USB and SCSI - Firmware update.

    FYI, connected by usb

    Apparently the update does not what he claims too.

  • External storage does not work after firmware update

    I've updated my ix2-200 for the latest firmware. After that, my NAS does not detect the external hard drive when I connect to it. I need to plug in the HDD and restart the NAS, this way to detect the SIN, but is not a good solution, because maybe someone is its access to the NAS.

    With the old firmware, I connected and disconnected the external drive without any problems.

    Is there a solution? If there is none, is it possible to Flash an older firmware?

    You can check your status here:

    https://Lenovo-na-en.custhelp.com/app/answers/detail/A_ID/14431

  • 32TL933 - in places of Toshiba Youtube app not working after firmware update

    I started having a problem since the latest firmware update on my 32TL933.

    Everything worked fine until the latest firmware update.
    Since then, when I connect to Toshiba Places, everything works well except Youtube.
    When I try to access Youtube, it shows the Youtube Logo and stuck on it...

    I would appreciate if someone tell me how can I solve this problem. YouTube are the only thing that I used in places of Toshiba, and now, I can't, it's frustrating cause I have this TV since August!

    Have you tried remove the Youtube app, and then add it again?
    Try this!

  • The cutting tool does not work after windows updates.

    I read answers to similar questions about the failure of the cutting tool.  I use the tool cutting regularly and I think it's a fantastic tool in Windows. I have Vista Ultimate and all my windows updates have managed: none were not installed correctly, and I did not install new programs or hardware.  It seems that Microsoft knows the snipping tool does not - why can't they simply provide an update patch to correct the problem, rather than make us do all the work.  I don't have to go through hoops of restorations etc to get something it seems work was broken by updates.  I'm about to go to a Mac.

    It worked for me! Thank you!

  • AS100V - does not work after Firmware update

    Hi there has anyone else had this problem? I was at half way through the update of the firmware v 2.0 and then the installer said there is a mistake and to reboot, so I did, and now all I get is the red light on the back of the camera. I tried to reset the camera, but nothing works. Everyone knows this? I am very angry that I'm about to go on vacation and need the camera. I wonder if Sony will replace it for me in the store? I bought at Singapore Changi Sony Center, but I live in England any help would be appreciated.

    Let me guess, you have used a Mac to update your camera and activated windows while she has been updated?

    Simply pull the battery, reconnect it, start the update of the firmware software, plug in the camera and click Next through the software, it will restart the update process. Now, here is the part MOST important - don't do anything on the computer while the process is running, only web browse don't go home away from this update window. It will take 5-10 minutes, but it will work I promise you.

    The camera does not light until you have completed the process of updating the firmware.

  • LaserJet Pro M1217nfw not working after firmware update

    Hello

    LaserJet Pro M1217nfw connected via USB to the MacBook Pro (non-retine, mid-2012) running OS X 10.7.5

    [Already posted this three days ago, but no solution - Experts hope sounds...]

    A few days ago, I downloaded and installed the latest version of the HP http://ftp.hp.com/pub/softlib/software12/COL32660/Im-80903-6/LJM1130_M1210_MFP_Full_Solution.dmg software

    The installation goes OK, then asked the installer to update the firmware of the printer and I said yes. The installer of the firmware reported success, but now the printer will not be in service more. At the start, it displays "then to initialize... "with the Green (ready) and amber (caution) of fires, then LCD turns off, then"initializing... ". "all over again, to infinity. Needless to say that the HP software or the Firmware utility see the device more and in system preferences, it is listed as "offline".

    What should I do? Is it possible to re Flash the original firmware? An updated firmware supposed to break things like that anyway?

    Thanks in advance for any help.

    Marels,.

    That's what I did:

    Hold [Cancel] and [right] button (there is no [down] key on the M1217nfw)

    Put the unit on

    Indicator light flashed and LCD displays "Permanent storage init" (whatever that means)

    -Ready light has stopped flashing and LCD asked "language?

    Out buttons and proceeded to the initial installation of language and regional

    LCD displays "Ready" - printer working again!

    Thank you and Kudos to you and MBJustice for your personal commitment.

    DG

  • Lenovo P780 back camera is not working after firmware update

    Hi team

    I recently upgrade to Lenovo P780 ROM P780I_ROW_S220_140722 my back camera stopped working.

    I tried the reset couple time factory, before the upgrade my rear camera was working then I don't think that a hardware problem.

    Please help me solve this problem.

    Kind regards

    Mohammed Mustansir

    Hello

    the problem is solved in p780_row_8g_221_140729

    Kind regards

    Mustansir

  • the Airport extreme appears not on the graphic overview

    the Airport extreme appears not on the graphic overview

    Everything plugged and works

    Unable to connect with the personal network

    By graphical overview, I presume you are talking about airport utility?

    Are you using wireless or ethernet?

    You have run diagnostic wireless on your Mac if you use wireless?

    Use Wireless Diagnostics helps you troubleshoot Wi - Fi on your Mac - Apple Support

  • my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

    my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    Once iTunes to work properly, you should be able to fix your device.

    TT2

  • screen capture on the iphone 6 does not work after 9.2.1 upgrade

    screen capture on the iphone 6 does not work after 9.2.1 upgrade

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Try to do a screenshot, once more.

  • APEX 5. Dynamic action on the CHANGE event does not work after applying the filter on IR.

    APEX 5.

    Dynamic action for the CHANGE event does not work after applying the filter on IR.

    Event: Change, selection Type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry

    Real action

    Selection type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry, Action: run the Javascript Code

    Is TI WHEREAS behavior?

    I know, I can work around this problem by using the Refresh event and javascript, but I prefer DA and if possible Change event.

    Concerning

    mdyla

    mdyla wrote:

    It is, how to force them reallocate dynamic Action in the event of CHANGE of the input elements after refresh of IR region.

    Set the dynamic scope of the event action to Dynamics.

  • AutoFill does not work after last update 3-6-3

    AutoFill does not work after last update 3-6-3

    is after update

    See control if Firefox automatically fills in forms

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
    See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  • my super USB does not work after last update OS EL Capitan

    my super USB does not work after last update os el capitan

    Hi viral_02,

    The resources below provides a few for the SuperDrive USB troubleshooting steps.  Click on the link to see all the possible symptoms and solutions, including resetting the system management controller.

    Get help with the SuperDrive slot on your Mac computer loading

    If the problem persists, Contact Apple or an provider of services authorized Apple, or make an appointment with an Apple Retail Store additional diagnosis, evaluation, or service.

    Take care

Maybe you are looking for