The alarm not

Similar Questions

• The alarm not during charge

  HI HI. My alarm doesn't seem to work when I am in charge of my milestone. I'm on 2.0.1 firmware. Did anyone facing this problem too?

  Thank you.

  Do you use a task killer? I used one after setting my alarm and he killed the task of the alarm, so it has never exploded, and I was late for work.

• Why my ZTE open c Firefox OS Smartphone forget the wlan settings and does not sound the alarm?

  Sometimes it is even enough to go outside the trash to let my smartphone to forget the settings for the wireless LAN. When I come back, I have to re-enter my wlan router - not so short - code. Once the internet connection is running as it should.

  In addition, the alarm does not work, I can adjust alarms as I like, set the volume to maximum and also activate the vibrator but does nothing when the time arrived, even when the alarm appears on the screen all the time. Is my broken phone? Or is this a bug in the installation of Firefox OS?

  Where Firefox OS does not store these values for wlan connection and waking hours? Is there an internal database that may be corrupt?

  Hi Markus,.

  I understand that you are having problems with the Wi - Fi connection and the awakening of your phone ZTE C open.

  The problem of awakening seems to be similar to what has been reported by other users and is followed on bug 1052245.

  You have more information about wake-up issues that you are experiencing? This can be very useful to our engineering team is studying. Please be aware that the ZTE is the manufacturer of your device, and only they are able to release an update.

  The wifi problem can be linked to the bug 923324.

  Please reply to this message with the following information:

  • What is the OS version and Build ID found on the device information page? Please visit this link if you need help to find the ID for your phone.
  • Please provide the exact steps to reproduce the problem you are experiencing.
  • How many times you experience this problem?

  Please be sure to include as much detail as possible, including all Web sites who may have this issue and the error messages that you may receive, exactly as they appear. This will ensure that we have all the information needed to investigate this problem.

  -Ralph

• Impossible to interrogate the alarms & events, alarms does not connect

  Hi all

  I recently ran a question with the DSC alarm event & logging. I have a number of all shared variables libraries set up to record data and alarms at the Citadel. I double checked that the library itself is configured for data recording and alarms, as well as all the variables. Using the DSM, I can see all alarms active in the system across all libraries and can receive all the alarm by program change events.

  For some reason, alarms to one of the libraries are logging, and attempt to query the historical events & alarms via MAX raise an error at about 14 of 15 times (with no code error or indication of why it fails). I have also tried to check the database of the Citadel, with it fails with an error unspecified (presumably during archiving on the side of things alarms, archive data seems to work).

  Can anyone offer an overview on how to solve the problem, preferably without data loss? In addition, how can I avoid this problem in the future?

  Thanks for the suggestion. I tried the llb related, but it could not remove existing data. That said, I managed to resolve the issue.

  Removal of the database of alarms (not only the alarms), did the trick. My approach was:

  1. stop all libraries through DSM

  2. create the new base of Citadel by MAX

  3. use DSC Archive Traces VI to check in the footsteps of the database active for the newly created database

  4. remove the active database

  5 detach the new database

  6. move the new database on disk for the location of the old database

  7. set the new database with the same name as the old database

  8. start all libraries

  At this point all the alarms started logging in correctly and I can query the alarms without problem. The system is on a UPS now, so I hope that any future power failure does not affect the things.

• Alarming - alarms defined by the user not appearing is not in history

  Hello

  I use the DSC module to create alarms.  I can successfully configure an alarm for a shared variable.  I use the alarms.vi of reading to read the current alarms.   I am able to recognize and to disappear which removes them from the list.  I also see a history of them when using the "alarm and event Query.vi.  Now, I do the same with user-defined alarms.  I have created alarm using the "user defined Alarm.vi value.  The alarm are displayed in the list (read alarms.vi).  I can acknowledge the alarm and it disappears from the list.  Now when I use the 'alarm & Query.vi' the user defined alarm does not appear in the list.  Only shared variable alarms are displayed.  Is this correct?  Is there a good example of what I'm doing?  The example of "User defined DSC alarms Demo.vi" does not give an example of reading historical alarms defined by the user of the database.

  Thank you

  Matt

  I removed the DSC module and re-installed which includes SQL Server.  That did the trick.

  Thanks for your help Caleb

• Z5 - connection to Smartband-SWR10 - and the alarm do not start schedule

  Hello

  In the last month, I knew that my phone and smartband guard abandon the connection. On the phone it shows like eather and x on the smartband icon, or SmartBand apps that said 'Connection' without that nothing happens. Sometimes just turn of the smartband at other times I need to restart the phone to get the connection to the top and the race.

  I have all the altest SW for Z5 (32.0.A.6.200) - SmartBand (05.00.12 - 1.7.0.873) and Lifelog (2.9.A.3.8)

  Since I use the smartband to wake me up in the morning, it's very enoying it does not work. So far I managed to wake up by myself...

  The phone is in charge all night and in the cradle, with the converted sound. The phone is on, with the exception of notifications. The phone is set to vibrate and make a soft noise. The Smartband is set to vibrate.

  If the connection is droped overnight, neighter the phone nor the smartband gives an indication of the alarm.

  I knew that the smartband and the phone vibrates, but there is no sound from the phone. Another version is that the phone is vibrating and making a noise, but the smartband does not vibrate.

  Before going to sleep, I check that the phone is set to the minimum, and that the connection to the smartband is OK.

  Good ideas to fix this problem?

  Hi again

  I didn't have any problems, fell to connedtions, after my Sunday relocations. So I think that the question could have been between LIfelog and Smartband software issue, but I'm not sure.

  So in short I belive the solution to my problem was to - uninstall both SmartBand and Liflog, to ensure that there is no software problems. Hope this might help others with the same problem.

• The alarm works do not at all please please Heeeeeelp

  After updating my Xperia Z2 about 3 days ago (October 1st) with the last update... The alarm does not work... Not a notification or lights or anything

  In addition, the clock at the top of the screen will not be updated as long as the device is woken up... It updates the clock when I lock the screen and open again.

  @KHashaBA

  Let us know if it worked please.

• The alarm is not since the update of ios10

  Since I updated my iphone 6 to iOS 10.2, that the alarm goes off, but he is without his help please

  Try these general steps. They could help.

  1 reset your iPhone by pressing and holding the sleep/wake and home buttons.

  2 disconnect you from your iCloud account and reconnect again.

• How long the alarm does not sound on clock iPad app?

  Hello

  I use my iPad clock app, and I was wondering how long the alarm sounds for if I don't stop it manually.

  Also, is there a way to set his time limit?

  Thank you

  Chris.

  Based on the few times wherever I slept too long by ten to thirty minutes, I think it rings less than thirty minutes and more than five minutes.

  Good day.

• Re: How to reduce the volume of the alarm?

  I have some programs that use the beeper system to report that something has happened.

  While in desktop computers the good old ringtone usually has an own speaker beside the case,
  for laptops, just like the toshiba, it is common that the sound of the alarm sound is mixed with the regular audio driver and so go out with the normal audio of the headphone jack.

  Now, this beep is really STRONG, and mixer windows vista seems to not have a slider for her...

  is it possible to change the volume of the ringtone in a different way?

  > have some programs that use the beeper system to report that something has happened.

  1. have you checked if there is an option to turn off the sound signal in the programs?
  2 you can turn off the beep at all, as shown below:

  http://img267.imageshack.us/img267/5026/sounduw.jpg

• Palm alarms of the GER. It will trigger the alarm even if the ringer volume is silent?

  I just upgraded to Palm Pre.

  I work in an office environment in which we have our rings off, which usually means the week of work my ringer is off and I just have on vibrate so I can feel it in my pocket when a call or text comes in.

  With previous phones if you set the alarm, the alarm would still off and make it sound, even if the ringer is turned downwards.

  PRE alarm will always be sound or I'm going to increase the volume of the ringtone to the top every night before I go to bed?  My charger is my bed so hung up that the charger is not a problem.

  Yes always audible alarm if the mute button is on mute, unless the settings in the preferences of the "clock" is not to do so. Open the app clock, the menu drop-down, select Preferences, there is a new option added in one of the latest improvements. 'Ringer turn off' > 'Play the alarm even when' > 'YES '.

• How can I change the alarm sounds?

  The default sound is so annoying in the morning. Is there a way to change the sound of the alarm? I watched a few videos on the sound of the alarm of the Apple Watch on youtube and they had the best sounds. I guess Apple has changed with WOS 2

  Hello

  I fear that it is not currently possible to change the alarm sound on Apple Watch.

  If you want to suggest that Apple considers adding this as a new feature, you can do it here:

  https://www.Apple.com/feedback/watch.html

  All submissions are read (even if you do not expect to receive a response).

• Setting the alarm

  I just got a DEFY on Vodafone, but the alarm will not work if I pass the phone at night, is - that correct or have I missed put a tick in a box somewhere to activate it?

  Yes, alarm will not work with the phone.

• How to remove the alarms and events database of Citadel?

  Hello

  I use LV 2010 with DSC.

  I made a mistake in my program and I wrote too much data event and alarm at the Citadel. Database *.mdf/*.ldf files are quite large > 1 G. Normally, I connect only two alarms per day. I want to delete all events alarm + data before a certain time of stamps for example. 1.1.2011. How can I do? I tried to use MAX and perform the operation so I wrote small program which reach the data from temporary database and then remove it. Yet I can find old events and alarms... I am able to remove the traces of old but not the events/alarms. How do I remove the alarms and events?

  Thanks, Jim

  Hi Jim,.

  Have you seen this:

  http://forums.NI.com/T5/lookout/how-can-I-delete-alarm-and-event-data-from-a-Citadel5-database/m-p/5...

  Not sure if it is valid with the current version, but worth it.

• How to disable the alarm or reset mp190 printer

  I have a canon mp 190 printer and I changed the toner.  Now the alarm is on and I do not know how to reset.

  Hi ValerieMejia,

  I suggest you to contact canon for all the parameters that could help turn the alarm off.

  http://www.USA.Canon.com/Cusa/support

  Hope the helps of information.