The application failed to initialize properly (0xc000005)

Similar Questions

• STOP: C0000145 (ERROR of APPLICATION), the application failed to initialize properly (0xc0000005)

  STOP: C0000145 (ERROR of APPLICATION), the application failed to initialize properly (0xc0000005).  Click OK to close the application.

  Occurs when I try to restart my laptop and ends the boot process.

  03/08/11 I get this same error, and I see that nobody has answered it yet. DPR anyone has any idea other than a new image for this problem?

  Rodolphe/Spyware/Malware infection, blue screens don't have an option to click OK to finish or even forget that you can click on anything. If you do not work in safe mode or even last known good configuration you can try a repair installation, but you can still loose data like that. I would just pull the information you need out of the HDD using a speaker and then wipe and start over from scratch. Don't forget to scan your files if you do not import everything using a speaker. However if you can access the mode safe mode with networking, try to download malware bytes and running (don't know how its spelled) it will remove files such as _is27.exe which is a (Rogue.Installer).

• "ibrytdesktop.exe. the application failed to initialize properly (0xc0000135)" when the computer is turned on.

  Original title: need help please

  Ive had an application error, ibrytdesktop.exe. Note ISC, the application failed to initialize properly (0xc0000135), click ok to close the application. Can this happens whenever the computer is on how I fix

  Hi petrospapamihelakis,

  Looks like one of the installed program on the computer has been corrupted.

  ·         Have you checked the problem in safe mode?

  Step 1: Try to start in safe mode to see if you get the error.

  Step 2: If he is able to start very well without any errors, and then try to try perform a clean boot to normal mode to check whether a third-party program is causing the problem.

  How to configure Windows XP to start in a "clean boot" State

  You can also read the following article to resolve the problems on the issue.

  Perform a clean boot to determine if background programs interfere with your game or program.

  Note: Make sure that you put the computer to a Normal startup once you are finished.

• Reinstallation of Windows Media Center XP error, the application failed to initialize properly (0xc000135

  I had to install a new hard drive after the death of my old. I use my Dell recovery/reinstallation disk. The first time I tried installing that it froze after the reboot. I then did a repair installation (twice) and each time got the following error:

  PxShare.exe Application error.

  The application failed to initialize properly (0xc000135).  Click OK to close the application.

  It appears at the end of the installation, but when my login screen is displayed, it shows only one account, administrator and request a password. I have not configured any accounts when I did the installation and you do not have a password. I tried to enter without password, using admin as password and check-in safe mode did not help - it still asked for a password.

  I don't know if the two problems are related or not.

  Thanks for any help!

  Hi Lowery619,

  (a) If you have external devices unnecessary connected to the machine, unplug them.

  (b) thereafter, you can try reinstalling Windows XP.

  For more information, please visit this link: install, reinstall, or uninstall Windows

  Install Windows XP

  Hope the helps of information.

  Please post back and we do know.

• Error when you try to open Internet Explorer 8: the application failed to initialize properly (0xc0000005)

  IExplorer 8 causes error "the application could not initialize properly (0xc0000005)."

  Hello

  I use Windows XP and make regular updates. I use a firewall, Windows Defender, virusprotection, etc and I don't surf _ or download strange apps.

  Whenever I try to open 8 IExplorer, it gives me an error "the application could not initialize properly (0xc0000005)."

  Any ideas how I can fix explore?

  You use XP, but post in a forum of Vista, and Internet Explorer has an own forum. Please ask here.

  Internet Explorer Forum
  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• The application failed to initialize properly (0xc000001d)

  My name is Daniel and I had problems with windows 7 and had to reinstall. I formatted the hard drive and after reinstalling windows, I started to download the Photoshop, After Effects and Premiere Pro compared to the Creative clouds... After installing these programs, when I try to open these programs they do not open. Opens an error message... "The application could not initialize properly (0xc000001d). Click OK to close the application. "What I'm doing? Someone help me pelase. I have a card mother Gigabyte Z97X-UD3H-BK, Intel Core i7-4790 CPU @ 3.60 GHz, NVIDIA GeForce GTX 680, 16 GB of RAM and Windows 7 Ultimate x 64.

  Hi Daniel,.

  Could you please check and verify if you have Windows 7 Service Pack 1 installed or not?

  Please post the log of errors.

  ~ UL

• each program indicates that the application failed to initialize properly (0 x 80000003)

  I have a dll file missing... winhttp.dll is missing... would not copy when I installed windows again after an accident of his windows xp professional cannot update any programs, can not open the components in the Control Panel, cant run updates or install any programs, keep the error message above... help please , its my mother in laws, grandchildren computer crashed it and im desperately trying to get his return on pogo playing popit... all I need is pogo to work and Outlook for his mail... Ive downloaded the .dll file but I can't open it or extract it or use the run... I can get online and discovered pages... that's about it...

  I have a new addition of copy and paste to my notes that I expected to see a lot of use:

  Dear: :

  Running sfc/scannow will not replace the winhttp.dll file missing.

  Why you post methods that do not work and will be just wasting time?

  Hove you never even seen this problem before, tried to recreate it so that you can actually see, or have you never really fixed?

  Why you learn not what sfc/scannow does and does not do?

  Here is a simple test to you and all your colleagues in the technical support engineer:

  I beg you to perform this simple test to know how the sfc/scannow:

  Boot your system to Safe Mode or the recovery for the Windows File Protection Console does not run.

  For this example, we will use the system critical file winhttp.dll.

  Rename or delete your c:\windows\system32\winhttp.dll.exe file so the file is now "missing."

  A critical file, is it true?  It is on the list of the file 3498 knows the Protection of Windows and SFC files, but now he isn't.

  If Windows File Protection is running, the "missing" file would be quickly and silently replaced (try to rename or delete it in normal mode and it will be quickly and quietly replaced).

  You follow own advice and run sfc/scannow to the end.

  The winhttp.dll is always had disappeared, right?  Did run sfc/scannow replace the missing critical system file?  No, it does not.

  How can he be so sfc/scannow is supposed to replace the missing system files?  This is because it is not this that sfc/scannow does.

  Now you know sfc/scannow does not.  He did not replace your missing system file (don't forget to put your back winhttp.dll so you will have a).

  Now, go to c:\windows\system32\dllcache and delete or rename the file winhttp.dll from there - and it will be gone and not replaced automatically because the Windows File Protection does not seem after this record.

  Run sfc/scannow in full again.

  Replace the file winhttp.dll missing in the dllcache folder, since it handles missing files (not the system32 folder) IS the folder that sfc/scannow.

  Now you know sfc/scannow does.

• The application failed to initialize properly (0xc0000007b). Click OK to close the application.

  I can't use my shortcut on my desktop, or go to the website to log into my hotmail account

  Hi, Randac,

  You may have picked up a virus.  Download this tool and run a scan completes.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  Using clean boot, as suggested Naman R allows to solve the driver problem

  http://support.Microsoft.com/kb/324103/en-us?p=1

• Logon.SCR - application error the application failed to initialize properly (0xc0000135). Click to complete the request.

  I get this message that displays a black screen. When I turned the computer off and then on again the same message appears. Cannot do anything else. What should I do?

  Hi NuvoGrand,

  Follow the instructions below to start the computer in safe mode.

  1 turn on the computer or restart the computer
  2 start typing the F8 key. The Windows Advanced Boot Menu of Options will appear.
  If you start typing the F8 key too soon, some computers display a "keyboard error". To resolve this issue, restart the computer and try again.
  3. ensure that the safe mode option is selected.
  4. press ENTER. The computer then begins to start in safe mode.

  If you are able to start the computer in safe mode, you can go ahead and perform the clean boot procedure following the instructions below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If this does not work, let us go ahead and run the Startup Repair tool and see if the problem is resolved.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Follow the instructions in the link below to perform the Startup Repair.

  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• I get a message "error autorun.exe - application the application could not initialize properly (oxc0000135). Can someone please make all suggestions?.

  I am trying to install a game via a DVD and get a message "autorun.exe error - application that the application failed to initialize properly (oxc0000135) click on ok to close the application. I use Windows XP. Anyone would please any suggestions to fix this? Thank you kindly.

  Hi Matt,

  Thanks for the reply.

  I really apologize to provide suggestions evil as menitoned in above post about Windows 8.

  Method 1: I suggest you to consult and post the thread in the forum link and check if it helps.

  http://forums.CivFanatics.com/showthread.php?t=173648

  http://forums.CivFanatics.com/forumdisplay.php?f=144

  Method 2: If the problem persists, I suggest you to contact the game manufacturer for assistance.

  I hope this helps. If you have questions about Windows, I suggest you post in the Microsoft Community. We will be happy to help you.

• Error "the application could not initialize properly (0xc00000005)".

  Original title: 0xc00000005

  Get the error message: the application failed to initialize properly (0xc00000005). Then, the computer goes user. Have tried to restore but has no prior restore point when the problem started.

  Hi Josh,.

  To check if the problem occurs in safe mode, follow these steps:

  Step 1: Start your computer in safe mode and check if the problem persists. 

  Step 2: If the problem does not occur in safe mode, start your system in a State of clean boot (in normal mode) to solve the problem.

  See How to solve a problem by performing a boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• The appilcation failed to initialize properly (0xc000007b). Click OK to close the application.

  The appilcation failed to initialize properly (0xc000007b). Click OK to close the application.

  Help please.  My computer has been infected by a virus some time ago.  I have cleaned the virus and now get the following message is displayed.

  Running Vista Home Basic Service pack 2 32-bit system.

  In particular I am getting kind of Spider solitaire, but I think I've noticed this on other games/programs of microsft preinstall.

  I have run chkdsk /f and / r but still have the same problem.  Thank you in advance.

  Hello

  It happens with any application?

  Method 1: You can also put the computer to boot and check if any third-party application is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I suggest you to run the SFC scan to make sure that the system files are intact:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Check in the case where the Viewer for any question regarding newspapers

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• How solve this error message application failed to initialize properly 0xc0000005 on start up

  Hi my name corri I have a computer laptop advent. When I start my laptop it goes to the widowed loding fine screen but then when it goes beyond this point he then goes to this error message

  (application failed to initialize properly 0xc0000005) then I click on ok, then it is once again, then I click ok again then it goes. then after it will theres just a blank screen without icons or nothing... I can't even open Task Manager some can help me please solve it!

  Hello

  You can try the steps below and check if that helps. You need the Windows XP installation CD to go forward with the steps below.

  (a) use the Recovery Console, which is described in the article below.
  http://support.Microsoft.com/kb/314058

  Note: You must make sure that your primary boot device is CD drive - go into the BIOS to ensure, if necessary,

  (b) (b) demarrer start from the Windows XP installation CD-ROM, and then use the EXPAND command, like this:
  Expand d:\i386\wininet.dl_ c:\windows\system32\wininet.dll

  Note: Where d: is the CD-ROM drive

  (c) then type EXIT and when the pc reboots, you should be able to boot XP.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• the Task Manager won't start don't no error "the application could not initialize properly (0xc0000006.

  I've heard fans speed medium speed and high when I don't do anything that would require heavy resources. I tried the two Ctrl-alt-delete and right-click in the taskbar, and it fails to start. "The application could not initialize properly (0xc0000006). Click OK to close the application. "I click OK and it pops up again and then I click OK again and it goes.

  I ran AVG and Spybot in safe mode with network but nothing detected... and you erased my memory of page file also.
  It is simply damaged or make me a bug/virus.
  HP D220 desktop model

  Ok. What I wanted to say, this is so that YOU can see the file, you must be able to view hidden and system files. Windows will however see the file any if YOU can see it or not.

  In autoruns, in my opinion, you have not clicked on 'options', then 'Filter Options '.
  Make sure that all check boxes are cleared in 'Filter Options '.

  Tomorrow, I would like for you to delete infected tasks Manager by HP. And copy the Dell2 for HP-infected Task Manager. Just in case the task manager has been infected and start actually malware.

  So, tomorrow,

  -Alex

• If I update to windows 7 it will fix error application failed to initialize properly?

  When I try to open certain programs I get application failed to initialize properly.

  I want to know if I upgrade from Windows Vista to Windows 7 will be the mistake still be there?

  Will he take it?

  Thank you

  Mildred W.

  Hello

  1. Since when are you facing this problem?

  2. don't you make recent changes?

  3. What is the full error message?

  4. what programs you try to run?

  If you upgrade Windows Vista to Windows 7, once again depends on what program you use. If there is a problem with this program, you could get the same question.

  If these programs are third-party programs, so I suggest to uninstall and reinstall once and check to see if the same problem happens.

  Alternatively, you can also try to restore the computer to an earlier point and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  It will be useful.