the application was unable to start correctly (0xc0000142). Click OK to close the application. Why?  Please help me!

Similar Questions

• the application was unable to start correctly (0xc0000142) Message window during the closing down, labeled cmd.exe.

  I have a problem that only occurs during the closing down. When I select Shut Down I soon get a pop up that says... the application could not start correctly (0xc0000142) click on OK to close the application. window label is cmd.exe. Whether I click on the window, closing down product and eventually after say 30 seconds the alarm disappears. clicking on the alert simply displays another alert. This only occurs during the closing down. Also, I have no problem to launch cmd.exe during the normal operation, or any other program running in the command window. I read a few posts but don't see anything exactly like this, what happens during closing down.

  Suggestions would be appreciated.  Eric

  Hello
   

  Please check if you are facing the same question when working in safe mode.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to boot mode safe mode of Windows 7 with networking.
  e. when Windows starts, use check and Internet explore if the problem persists.

   

  For additional information see the articles below.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/troubleshooting-problems-while-in-safe-mode
   

   

  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

• the application was unable to start correctly (0xc0000142)

  How to fix the application could not start correctly (0xc0000142) in win 7

  Hello Pramod V. Bennett,

  Sometimes, this error can be caused by trying to install a software that is not compatible with Windows 7.
  You can try the following methods:

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program

  2) click Properties

  3) click on the Compatibility tab

  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3^rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• The application was unable to start correctly (0xc0000005) - keep from appearing when you open a pdf file. How can I stop this?

  I'm on a 64-bit Windows 7 Pro computer and just upgraded to the most recent Adobe Acrobat Reader DC.  When I open a PDF file a window opens saying "the application could not start (0xc0000005).  Click OK to close this application"I click OK and the window opens up again about three or four times before it finally stopped.  My PDF file is then visible.  This is driving me crazy!  I tried to use "Repair Installation" in the Menu Help, but it has no effect.  I downloaded and installed the latest update - and this miserable message keeps popping up!  Before you do a system restore to revert to the previous version, can someone please tell me how to solve this problem?  Thank you very much.

  Hello

  There might be a chance of the previous version left overs. Try uninstalling Acrobat using cleaning tool: http://labs.adobe.com/downloads/acrobatcleaner.html

  Then try to reinstall it and then see if that solves the problem.

  Concerning

  Sukrit diallo

• The application was unable to start correctly (0x000007b)

  Cannot open my Lightroom 4.4 download. activation message get "the application could not start correctly (0x000007b). Click OK to close the application.

  Title of the message was edited by: Brett N

  You will need this technote, save you trawl through all results

  http://helpx.Adobe.com/Lightroom/KB/error-Unable-start-correctly-0xc00007b.html

• "The application was unable to start correctly (0xc000007b). Click OK to close the application. »

  I have a Dell all-in-one that I had to send for a new motherboard. While they have it, I got them the reformat. I'm trying to put Skype on it, but I get this error message once downloaded and when trying to install: " ", ", the application failed to start correctly (0xc000007b). Click OK to close the application. " I am running Windows 7 Home Premium 64-bit. None of my other programs I had to reinstall caused me a bit of trouble, but Skype won't move past this error message. Any help would be appreciated.

  I thought about it. I couldn't install it from Chrome, but I did of IE and it's fine now.

• the application was unable to start correctly (0xc0000005)

  I have the above error, I don't use host character for a very long time (since Preview 3), so I don't know when or what exactly caused the problem... all other adobe software work fine (AE, Pr, Ps,...)

  Windows 7 here

  • You have updated to the latest version of After Effects (just released, 13.8.1)? This phenomenon occurs in part 4?
  • Have you tried logging on and creative cloud back to see if that helps?
  • Have you tried to uninstall/reinstall AE to see if that helps?

  If none of those working, let us know your specifications according to this format: FAQ: how to harvest information system and application for solving the problems?

• Explorer.exe - application error, the application was unable to start correctly (0xc0000022).

  I get this error after I entered my password to connect. Then the screen goes black. I can hit ctrl-alt-del to get the menu, but no matter what link I click I get the same error code. I use the 32-bit version of Windows 7.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• How fix the Application could not start correctly (0xc0000142)

  First was working fine until I did the last update today. After update, I clicked on the shortcut for the first and got the application could not start correctly (0xc0000142). So I uninstalled and reinstalled and got again. The tool clean adobe and still got it. Erased from my computer and a new downloaded installation creative cloud and installed first again and still got the error. Anyone had this problem with the new update?

  Hi, JTS,.

  First was working fine until I did the last update today. After update, I clicked on the shortcut for the first and got the application could not start correctly (0xc0000142). So I uninstalled and reinstalled and got again. The tool clean adobe and still got it. Erased from my computer and a new downloaded installation creative cloud and installed first again and still got the error. Anyone had this problem with the new update?

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• Try reinstalling firefox on a windows machine 7 and I get «the application could not start correctly (0xc0000142)»

  To solve a different problem, I uninstalled Firefox. After you have solved the other issue I'm tying to re - install Firefox and get an error message that says that "the application could not start correctly (0xc0000142). Click OK to close the application. "The title bar of the window, said"setup - stub.exe - Application error. "My PC is a Dell Studio 19 all-in-one running Windows 7 Home Premium.

  I ended up solving this problem by doing a reinstall on Windows 7 site. It took a little while but fixed this and a few other issues I've had.

• Window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application when you try to run Microsoft solve this diagnosis

  Original title: Microsoft Fix it diagnosis

  I ran Microsoft solve this diagnosis. He gave me a window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application.  someone knows how to fix this?

  Thank you

  FOR EXAMPLE

  Hello

  Thanks for the reply. Until I'm your answer I have restored the laptop to the State of origin, with the possibility of restoring elements that had been added by the user. I'm trying to update windows, etc.. If I get errors or problems I will post them here. Thanks for your detailed response.

  Eddie

• Windows 10 first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.  I reinstalled, reformatted the drive one reinstalled Windows 10 from scratch and I still get this error.  Has anyone seen this one?  My setup is below:

  

  Hi PK Gary,.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• Application failed to start correctly (0xc0000142). Trying to open Adobe Premier Pro

  Hello

  I was working on the Prime Minister yesterday and today I tried to open my file, but it said that my file was created on a previous version of the Prime Minister. So I tried to find an update for the Prime Minister and ran the update. Then I tried to open the program and I get this error message "Application could not start correctly (0xc0000142)." When you try to open Adobe Premier. I tried to uninstall the first pro and put it back, but I still get the same error. All my other apps by CC work very well.

  Help, please!

  Thank you for the update.

  I apologize, it was recorded as a BUG with AMD processors. Last update does not work for the AMD Phenom processor.

  I suggest you go back to a previous version of 2015, i.e. 2015.0

• I currently own Adobe Creative Suite 5 Master Collection. My computer crashed and I was unable to disable the program. Please help me to reinstall the programs, given that I have exceeded the download due to problems with my computer. Thank you

  I currently own Adobe Creative Suite 5 Master Collection. My computer crashed and I was unable to disable the program. Please help me to reinstall the programs, given that I have exceeded the download due to problems with my computer. Thank you

  Hello

  Please see the thread: https://forums.adobe.com/thread/2028937?start=0&tstart=0

  Kind regards

  Shelly

• I just started using dreamweaver cs5 and image width = "3507" height = "2480 appears correctly on my page how to solve the this.someone please help

  I just started using dreamweaver cs5 and image width = "3507" height = "2480 appears correctly on my page how to solve the this.someone please help

  I played around the waist ut still not put the page to display properly

  The time has come to show us the code. It is best done by providing a link to the site, if you could post the HTML code and CSS here for us to have a look on.

  What you did until now, is an image that is limited in its container, a container that is much narrower than the width you are aiming for.