the application was unable to start correctly (0xc0000142)

Similar Questions

• the application was unable to start correctly (0xc0000142). Click OK to close the application. Why?  Please help me!

  the application was unable to start correctly (0xc0000142). Click OK to close the application. Why?  Please help me!

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  Hi Jeff,

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• the application was unable to start correctly (0xc0000142) Message window during the closing down, labeled cmd.exe.

  I have a problem that only occurs during the closing down. When I select Shut Down I soon get a pop up that says... the application could not start correctly (0xc0000142) click on OK to close the application. window label is cmd.exe. Whether I click on the window, closing down product and eventually after say 30 seconds the alarm disappears. clicking on the alert simply displays another alert. This only occurs during the closing down. Also, I have no problem to launch cmd.exe during the normal operation, or any other program running in the command window. I read a few posts but don't see anything exactly like this, what happens during closing down.

  Suggestions would be appreciated.  Eric

  Hello
   

  Please check if you are facing the same question when working in safe mode.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to boot mode safe mode of Windows 7 with networking.
  e. when Windows starts, use check and Internet explore if the problem persists.

   

  For additional information see the articles below.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/troubleshooting-problems-while-in-safe-mode
   

   

  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

• The application was unable to start correctly (0x000007b)

  Cannot open my Lightroom 4.4 download. activation message get "the application could not start correctly (0x000007b). Click OK to close the application.

  Title of the message was edited by: Brett N

  You will need this technote, save you trawl through all results

  http://helpx.Adobe.com/Lightroom/KB/error-Unable-start-correctly-0xc00007b.html

• "The application was unable to start correctly (0xc000007b). Click OK to close the application. »

  I have a Dell all-in-one that I had to send for a new motherboard. While they have it, I got them the reformat. I'm trying to put Skype on it, but I get this error message once downloaded and when trying to install: " ", ", the application failed to start correctly (0xc000007b). Click OK to close the application. " I am running Windows 7 Home Premium 64-bit. None of my other programs I had to reinstall caused me a bit of trouble, but Skype won't move past this error message. Any help would be appreciated.

  I thought about it. I couldn't install it from Chrome, but I did of IE and it's fine now.

• The application was unable to start correctly (0xc0000005) - keep from appearing when you open a pdf file. How can I stop this?

  I'm on a 64-bit Windows 7 Pro computer and just upgraded to the most recent Adobe Acrobat Reader DC.  When I open a PDF file a window opens saying "the application could not start (0xc0000005).  Click OK to close this application"I click OK and the window opens up again about three or four times before it finally stopped.  My PDF file is then visible.  This is driving me crazy!  I tried to use "Repair Installation" in the Menu Help, but it has no effect.  I downloaded and installed the latest update - and this miserable message keeps popping up!  Before you do a system restore to revert to the previous version, can someone please tell me how to solve this problem?  Thank you very much.

  Hello

  There might be a chance of the previous version left overs. Try uninstalling Acrobat using cleaning tool: http://labs.adobe.com/downloads/acrobatcleaner.html

  Then try to reinstall it and then see if that solves the problem.

  Concerning

  Sukrit diallo

• the application was unable to start correctly (0xc0000005)

  I have the above error, I don't use host character for a very long time (since Preview 3), so I don't know when or what exactly caused the problem... all other adobe software work fine (AE, Pr, Ps,...)

  Windows 7 here

  • You have updated to the latest version of After Effects (just released, 13.8.1)? This phenomenon occurs in part 4?
  • Have you tried logging on and creative cloud back to see if that helps?
  • Have you tried to uninstall/reinstall AE to see if that helps?

  If none of those working, let us know your specifications according to this format: FAQ: how to harvest information system and application for solving the problems?

• Explorer.exe - application error, the application was unable to start correctly (0xc0000022).

  I get this error after I entered my password to connect. Then the screen goes black. I can hit ctrl-alt-del to get the menu, but no matter what link I click I get the same error code. I use the 32-bit version of Windows 7.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Outlook Express could not be started. The application was unable to initialize the store directory. Your computer may be out of memory or your disk is full. Error code: 0 x 80007114

  Operating system Windows XP, at startup, I get the message: "Outlook Express could not be started. The application was unable to initialize the store directory. Your computer may be out of memory or your disk is full"and displays the error code: 0 x 80007114.  (I have a new drive hard with enough space) Outlook Express always open well and functioning normally.  The message mentions and how to fix the problem?  Thank you, Rick

  Jump here (nothing Bruce suggested is false), I did a search and found this old article (http://support.microsoft.com/kb/245419), which indicates that there is a bad entry under the identity key in the registry (see www.oehelp.com/backup.aspx for background).  So if it's a big problem, you can do the steps suggested in this article and that will fix it.  Or if you have just one account, then backup your settings and the identity key and then delete the identity key and then start OE and it will establish a new, and you can then set up your account again, and then import the messages from the older directory.  But it does not indicate the major corruption, so you can just ignore it.

  Steve

• The application was able to start (msvcp100.dll and atl100.dll not found)

  I recently to get this error when opening in 2012 of LabView. I get two different error messages. The first said "the application failed to start because MSVCP100.» DLL was not found. Re-installing this application may fix the problem. "The other message says the same thing, but it's ATL100. DLL is not found.

  I think that these files are part of the C run-time engine, but I don't know what I have to install to solve this problem.

  Hello boochbrain,

  I think you are right that these files are part of a runtime engine; specifically, the C++ runtime library.  Relocation of these libraries could certainly mitigate these errors you see.

  Here is a link to free download pages of the different versions of this software on the Microsoft Web site: http://www.microsoft.com/en-us/download/search.aspx?q=visual+c%2b%2b

  I would like to know how it works!

• Dependency services or the Group was unable to start on Vista

  I have window Vista and wireless internet in my house.  The icon that shows if you are connected to the internet has a red x in the way in and he says: "State of the unknown connection of dependency service or group failed to start" I'm sometimes still connected to the internet when it says this, but it disconnects while I'm in the middle of something and I have to re start the computer to get it back.  I continue to have the right message.

  I tried to disable the firewall.and it does not make a difference.  Not sure if this helps, but I have Trendmicro Antivirus and spy sweeper from webroot on the computer.  I thought that maybe it was the internet provider, but we went from companies and it has changed nothing.

  Help, please.
  Thank you
  Leah

  Hello

  Redefine ALL Windows Services on their default values.

  Start right click - type in the search box-> find Services in the high - on - RUN AS ADMIN

  BlackViper - Services
  http://www.blackviper.com/WinVista/servicecfg.htm

  =================================

  After him above if necessary reinstall the drivers. If WiFi uses the wired connection and if a cable to use WiFi
  and if no work download the drivers on another machine and transfer them to removable media.
  Don't forget to try to hit F8 you can start and select Mode safe mode with networking.

  Actually, try updating your driver.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How fix the Application could not start correctly (0xc0000142)

  First was working fine until I did the last update today. After update, I clicked on the shortcut for the first and got the application could not start correctly (0xc0000142). So I uninstalled and reinstalled and got again. The tool clean adobe and still got it. Erased from my computer and a new downloaded installation creative cloud and installed first again and still got the error. Anyone had this problem with the new update?

  Hi, JTS,.

  First was working fine until I did the last update today. After update, I clicked on the shortcut for the first and got the application could not start correctly (0xc0000142). So I uninstalled and reinstalled and got again. The tool clean adobe and still got it. Erased from my computer and a new downloaded installation creative cloud and installed first again and still got the error. Anyone had this problem with the new update?

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• Try reinstalling firefox on a windows machine 7 and I get «the application could not start correctly (0xc0000142)»

  To solve a different problem, I uninstalled Firefox. After you have solved the other issue I'm tying to re - install Firefox and get an error message that says that "the application could not start correctly (0xc0000142). Click OK to close the application. "The title bar of the window, said"setup - stub.exe - Application error. "My PC is a Dell Studio 19 all-in-one running Windows 7 Home Premium.

  I ended up solving this problem by doing a reinstall on Windows 7 site. It took a little while but fixed this and a few other issues I've had.

• Window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application when you try to run Microsoft solve this diagnosis

  Original title: Microsoft Fix it diagnosis

  I ran Microsoft solve this diagnosis. He gave me a window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application.  someone knows how to fix this?

  Thank you

  FOR EXAMPLE

  Hello

  Thanks for the reply. Until I'm your answer I have restored the laptop to the State of origin, with the possibility of restoring elements that had been added by the user. I'm trying to update windows, etc.. If I get errors or problems I will post them here. Thanks for your detailed response.

  Eddie

• Windows 10 first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.  I reinstalled, reformatted the drive one reinstalled Windows 10 from scratch and I still get this error.  Has anyone seen this one?  My setup is below:

  

  Hi PK Gary,.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin