The Atheros driver update / / no network found

Similar Questions

• LOST WIRELESS - BAD PROVIDED BY WINDOWS UPDATE ATHEROS DRIVER UPDATE

  I've been having problems for 3 months with my laptop HP with Windows 7 not being not able to see all the networks any longer.

  I HAVE THE ATHEROS DRIVER

  FOUND THE PROBLEM!

  HERE'S THE SOLUTION THAT WORKED FOR ME:

  -UNINSTALL EVERYTHING and all WINDOWS UPDATES
  -RESTART your computer
  -UNINSTALL your WIFI software which you can do via the Device Manager
  -WIFI adapter is located under the network adapters
  -Restart your computer
  -Allow to Windows to REINSTALL the software for your computer device
  -Go to the Device Manager
  Highlight the WIFI driver
  -In the toolbar at the top of the device, under Action Manager, select Properties, and that there should be an option to ROLL BACK to THE PREVIOUS VERSION
  THIS RESTORES YOUR DRIVER TO A PREVIOUS VERSION OF THE SOFTWARE *.
  -RESTART your computer

  It worked for me and I thought I'd share this find!

  AFTER DOING THIS, YOU WILL NEED TO GO BACK AND UPDATE YOUR WINDOWS... THERE IS A CATCH!  READ MORE

  - DO NOT DOWNLOAD THE ATHEROS SUPPLIED BY WINDOWS UPDATE UPDATE!

  You'll need display the list for IMPORTANT UPDATES and UNCHECK the ATHEROS DRIVER UPDATE.

  I hope this helps someone else!

  This has been a huge relief for me to finally have my laptop back up and able to see wireless again!  I was unable to do anything about it during 3 months!

  You should not need to uninstall updates. Roll back the previous driver should be all it takes.
  Kerry Brown MS - MVP - Windows desktop experience

• 4K @ 60 Hz fichier_ecriture deleted on the bootcamp driver update?

  Hello, I currently have a 2015 Macbook pro with a M370x AMD 10 under bootcamp with the graphics driver 6.0 Windows Update installled.

  I am running a LG 27UD68-P on the mini display port with an adapter Club3D HDMI 2.0.

  This will run out 4K @ 60 Hz very well on Mac OS X and same bootcamp without updating to 6.0 graphics driver was last updated.

  Now that I've updated, my refresh rate is only limited to 30 hz, even if AMD Radeon is the maximum resolution supported and the refresh rate is 60 Hz 4K.

  I've updated the graphics card drivers previously using the method of unofficial workaround for the AMD driver version, but I re-installed Windows since then and you just want to know if it is possible with the latest updated version? If this is not the case, what would be the next driver update be scheduled for possibly?

  Thank you.

  No one on the CSA can provide you with a date.

• Windows Update includes the Toshiba driver updates?

  Hello

  Windows Update includes the Toshiba driver updates?

  And if yes, do you know what drivers are included in Windows Update and that would be excluded?

  Thank you...

  Hello

  Microsoft and Toshiba updates are two different things.
  Toshiba drivers are offered by Toshiba, and these drivers are tested by Toshiba. Toshiba has developed a small tool called TEMPRO. This tool runs in the background and look for information on available updates.
  All updates of drivers, tools and utilities does not update automatically. It can be done by the owner of the laptop. TEMPRO just pick up info on the net and to inform the owner of the laptop.

  Microsoft updates are probably known to you. These updates are Microsoft and Toshiba has no influence on this.
  When you check the list of available updates may have included updates to the WLAN/LAN card, driver of the touchpad and device ACPI Toshiba x 64. This is defined as optional updates and cannot be updated.

  To be honest you should not update at all. For hardware use drivers provided by Toshiba only.

• Unable to set server 2012 without the protocol driver LLDP Microsoft network adapter. I have searched the driver but had no chance. My question is where is it located on the CD-ROM of the 2012 Server

  Unable to set server 2012 without the protocol driver LLDP Microsoft network adapter. I have searched the driver but had no chance. My question is where is it located on the CD-ROM of the 2012 Server? I use the version standard edition. Thanks for any advice.

  Thank you all.

  John Hayes

  Hello

  The question you posted would be better supported in the TechNet Forums. I suggest you to ask your question in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Thank you

• The Windows driver update

  I have a popup that says that I should update my driver and he said it was a partnership of the window.  I have had nothing like fear of.  Barb Hoffman

  Hi Barbara,

  Thanks for posting your query to the Microsoft Community.

  It is good to do the research on things that you are not sure of and I appreciate that you posted this on our forum.

  For me to better understand the issue and to find the cause of the problem, please answer money questions:

  1. What is brand and model computer?
  2. When did you get this pop-up message?
  3. You did any changes made to your computer , after which the pop-up appeared?
  4. What is the accurate and complete message which is to appear?

  To update the drivers, the simplest method is to install through windows updates.

  Check the updates of Windows for the latest driver updates.

  Check Windows updates if driver updates are available. If so, the same install and check if it helps.

  • Press Windows key + W on the keyboard.
  • Type the updates in the search bar and click the Windows Update icon from the result of the search.
  • In the Windows Update window, click on the link: check the updates from the left side of the window to receive a new list of updates.

  If updates are available, install all updates listed there. Make sure that you install all updates including the optional updates.

  Has e of information:

  How to install Windows updates in both User Interfaces in Windows 8

  http://support.Microsoft.com/kb/2777982

  Hope this is useful and solves the problem. Try the above steps and get back to us for assistance.

• HP 15 ac101tu: after the failure of the display driver update, cannot open my laptop

  my laptop's ac 101tu... I was updating the display driver, but unfortunately the network had disappeared. After that, he says that he does not. so I try to restart the computer, but I can't open that only he says there is an error had to be reset, but I tried a lot of things for the auto repair, it does not work. Please help me...

  Use the recovery flash drive you must have created now. Start-up and in the advanced choose System Restore. Choose a restore point prior to the update as dated.

  http://support.HP.com/us-en/document/c04758961

• Satellite 300CDT: where to find the Bios & driver updates

  Hello
  Ive been given an old 300CDT and I'd like to update bios
  and other drivers.
  However, the support site does not list this as a model.
  I can find a few models that may be similar.

  Should what model number I use to download BIOS and other updates?

  Reads the tag on the laptop:
  S300CDT / 2.1 GB
  Model PA1261EYX-EN95

  Thanks in advance
  Dub

  On the Toshiba driver page, you can find the driver in the field of archives.
  Have you checked it?

  I checked the archives and found only the drivers for Windows 98, 95 and NT.

• Want to m6-k088ca: m6-k088ca tea spilled want fried HARD drive. try to load the operating system on the new drive HARD get no found boot device

  Hi I want to m6 - k088ca it came with Windows 8, I've updated to 8.1 has a 64-bit operating system. I spilt tea on it and fried hard drive.

  Try to save money I bought a 500 GB hard drive instead of a 1 TB of HDD, it can with. Install it and then through the process to implement the recovery program and try to load the image of the system on my USB key. Recovery program did come and I tried to load the System Image to my USB disk hard nine, but nothing happened.

  I have only kept getting no device found startup message after the attempt to load of the System Image. Discover your forum, I discovered that I could not use the Image of the system on nothing less than what was originally on my computer a 1 TB hard drive. So, I went out and I tried to install Image system on it. I was unable to implement the recovery program I had before. I went to the boot options and he set up to boot from the key USB didn't keep get no boot device found message. After trying several different ways to do it, I made a test drive and kept getting unavailable message. I've reset the hard drive wiped clean all connections and was still unable to do a hard drive test, so I assumed that there was something wrong with the hard drive has returned to where I got it from. Then went to another bank and picked up another.

  First thing I did was a fast hard drive test and it happened.

  I tried to install e system on nw HDD image with no luck. I have never been able to implement the program of recovery since that first time. With the help of your forum, that I have que j' ai tente tried to load my picture of the system a couple of different ways but get no found boot device message.

  Have I may have something to corrupt the system on my USB key Image trying to download it on a smaller hard disk?

  I went to the view of Windows and try to download Windows 8 on an another USB and then tried to download it and continue to spread the message no boot device found. I tried this download on my g6 HP Pavilion with Windows 7 64 bit operating system. This is why it did not work because I use a computer with Windows 7 and not Windows 8?

  Thanks Bill

  Hello:

  See if you make your own plain W8 x 64 installation media works for you...

  Download the ISO W8...

  https://docs.Google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?PLI=1

  Then use this tool to make the file iso bootable on a 4 GB + DVD or USB flash drive

  http://www.Microsoft.com/en-us/download/Windows-USB-DVD-download-tool

  If you install via a DVD, you must go into the BIOS, turn on legacy mode and disable secure boot.

• On my desk and computer portable firefox crashes when I try to download the program/driver, updates etc.

  Firefox crashes when I try to download updates to a number of different programs, etc. I tried to download updates LR4 and Adobe flash from Adobe and driver updates for Wacom tablets. Crash to desktop and laptop. I changed browsers and was able to download the updates. I first noticed what is happening on 12 December.

  This is because you use the free download manager, please uninstall it and use default downloader for Firefox.

• HP Envy: the NVida driver update

  HP sent me a driver update that dutifully, I installed and now my computer screen keeps going on and outside. What should do?

  It may be possible to use (part of Windows) system restore back to a date before the update.  If this is what causes the problem, it will be the way it was.

• How to activate the automatic driver updates?

  Original title: update the drivers for hardware devices

  When install automatic updates, I get a message that 'Driver updates turned off' How do I turn on?

  Hello

   
  What is the operating system installed on the computer? Click the link below for help on this.
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running
   
  Enable/disable driver updated invite, it is essential to know what material make the device with the message driver.
   
  To receive updates on autopilot (for Windows 7), include these links:

   

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

   

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Updated a hardware driver that is not working properly

  For vista: http://windows.microsoft.com/en-US/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

   

• The graphics driver update

  I have HP - Windows 7 Home Premium 64-bit; P7-1030

  I've recently upgraded from Photoshop CS5 to CS6 and I get an error message when I try to use a filter called oil painting, the message reads: "the filter you were using has encountered an error of unknown graphics processor that caused an unexpected exit. Visit the Web site of the manufacturer for the latest version of the software "."

  My questions are: 1) it is possbile to upgrade with/without damage or crashing my computer? (2) how to? Is this a downlaod buy a chip or any? Once I update, I have to spend anything else to be able to use the new driver/graphics card?

  Thanks, Tammy

  Just the intel graphics in your machine then under cards, Graphics Device Manager right click on the device intel and select the software high element of the page "update driver".  Which automatically turns to the internet and search for the most recent driver.  He can ask permission to load and you should say Yes if so. That's all you should have to do.

• The graphics driver update failed: 'WindowsUpdate_800705B4""WindowsUpdate_dt000"

  A long download and install driver for Nvidia ended with the message of this failure. What should I do?

  You should not be installing drivers from Windows Update anyway. I don't know why it failed but maybe because it is the wrong driver for your video card. Often, this happens with the drivers available on Windows Update and is one of the reasons we main technicians say do not install the drivers from there.

  Here is some general information about the drivers. Please note the first sentence of the information, which is the most important part.

  The first law of Driver Updates is "if it's not broken, don't fix it". Normally if everything works, you want to leave things as they are. The exception is that heavy players usually want to update their video and sound drivers for every last bit of absolute performance of the equipment to get the best frame rate. If you are not one of these people, you need not update your drivers, if there is no problem you're trying to solve.

  Never get the drivers from Windows Update. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - system information for Windows MS - MVP - Elephant Boy computers - Don ' t Panic!

• The graphics driver update failed: 'WindowsUpdate_800705B4 '.

  I didn't know youre not suppose to install optional updates. How can I put an end to this problem: failed to update the graphics driver: "WindowsUpdate_800705B4" "WindowsUpdate_dt000"?

  I just download optional updates. Help!

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner