The authentication of the client at the edge of Collaboration / MRA
Hello
Could someone help with the following question?
When a Jabber client to get authenticated?
My understanding is that when a Jabber Internet device accesses (to connect) the highway-E, only the server (Expressway-E) is authenticated (using the public certification authority in the operative part of Jabber).
Is this correct? If so, the user of the device Jabber/get authenticated when the device attempts to save with the CUCM?
Thanks in advance,
/ Bertin
Dimension Data.
In the case of deployment of Jabber/CUCM/Highway, during the initial connection between the Jabber client and server side of the highway, there is an exchange of key/cert/handshake that creates a secure between communication channel. At this point customer Jabber solidly passes the credentials to the edge of the highway and happening at the Expressway kernel, the kernel then provides the credentials to the server CUCM (that defies in turn compared to its local user database authentication or LDAP, if it is in use) then returns a message authenticated core Expressway , which sends it to the side of the highway, which tells in turn the Jabber client, it has successfully authenticated.
This leaves out some deeper technical details, but does that answer your question?
Also, above statements may be different for a deployment of VCS (not Expressway series) as there are has several authentication options. It would also be about endpoint and video Jabber for TelePresence and not 'normal' Jabber points.
Tags: Cisco Support
Similar Questions
-
Hello
I would like to learn more about Edge 95 especially on the part "4 videoconference and teleconference audio 3.
How does it work? It includes 4 video and audio 3 at the same time?
We have a client who asks for Edge 95
I am aware that it is already EOL and the replacement is SX20.
But the SX20 covers all the features of dashboard 95, such as the IRB and Connector (RCA, S-Video)
So I think of the SX20 / C40 + ISDN link. (Quick question: which is close to cutting-edge features 95, SX20 or C40?)
But I don't know about some of the audio conference. Please help on the audio portion.
Need your advice on this
Please notify
Best regards
Titebiket Mohamed Yatim
Yes, that's right - the multisite license allows you to have yourself + three other participants - you can have a total of 7 - unless you use a form any MCU.
The older edge MXP could do the full 7 (yourself and three others by video and audio 3 extra - as long as everything was in the throttling of 2304kbpds), but as you said, the Edge 95MXPs went to end of sale on May 14, 2013, so are no longer available.
Wayne
--
Remember the frequency responses and mark your question as answered as appropriate.
-
I would like to be able to scroll using the gesture control. I think I've been using sound, but it now seems to be not not available.
Scrolling by pointing at the helm of the edge is a pain!Gestures are a feature of your operating system. Check your operating system settings.
TB - 38, 3 Win10-PC
-
Satellite L10-333: screen stays black, until I hit the edge of the screen
I have a Satellite L10-333, which is about 3 years old, it has suddenly started having screen problems.
It started with a white screen instead of the normal and a black line all downstairs in the middle.Now when I turn on the pc, the screen remains black and dead until I hit the edge of the screen and when the screen comes alive, I must hold and press part of the cover, so that the display stays on...
Anyone know what's the problem?
I thought it might be a loose wire or connection.
Someone else has or had this problem?Thanks for your help...
I agree with you. It must be a contact problem. In my opinion, it is not important if anyone else has this problem too and you have to find the solution as soon as possible.
The laptop must be disassembled and check the connection of the screen. Now the question is what to do. Can you check it alone or you need professional help? -
Hello
I have a T61 (current running x 32 Vista Business) that I use for my job. Be a consultant, I have to work "on the spot" where internet is not available at all, or is restricted to internal staff only. I have my mobile provider EDGE data plan, but I just can't figure out how to get my laptop to use the EDGE connection. I tried to connect using bluetooth, but without a bit of luck. He shows me a login dialog box. My network provider does not give me any name to username/password or a number to call, she just send me the settings by SMS.Would be really grateful if anyone can help me on this point, I need to be connected to my colleagues, servers, etc..
Thank you
Harris.* Bleep *, it's a simple solution, like the NOKIA PC suite installation.
-
How the police of the edge Strip?
Hello
How do police the edge Strip.
I load the bands from tip of all obejects of Panel by an external text file.
The external text file (fi edit by notepad) has a policy that is not the same as the edge Strip.
The looks of edge band is not nice text isn't online.
Example:
: is the label of the object with edge band information behind.
:topOnFailRB
Stop when a pass or a failure is detected.
LSL on USL on: LSL < result=""> USL failure outside the Spec limits
LSL on off USL: LSL > train the lower Spec FAIL
LSL off USL on: result > side ceiling USL FAIL
LSL off off USL: LSL =< result="">< usl ="" pass="" between="">Sincerely, Bernard Arts
-
Backflip: Slow on the edge and firm strength
Why is my internet so slow im on the edge... and my backflip's force cloesing everything!
You have recently installed new software?
-
How can I get my printer to print all the way to the edge of the paper?
I have a printer HP Deskjet 3050 J610, running on Mac OS X 10.6.8.
I can't seem to find a way to get the printer to print a full page of purge, or even a page (8.5 "x 11") with a narrow border on the edge of the page.
Is it possible to do this (I sure hope so); and, if so, what settings will make it happen?
Thank you.
M
Hello
I'm sorry to inform you that the product in issue does not support printing full page, you will find listed by specifying below (Research of borderless printing):
http://h10010.www1.HP.com/wwpc/us/en/SM/WF06a/18972-18972-238444-1142650-410635-4066450.html?DNR=1
Below you will find that the minimum margins should remain by the mechanism of specific equipment:
Top: 0.06 inches -
E3000 won't handshake with the edge router
Recently, I bought new E3000. I place the E3000 with edge router static IP address rather DCHP which seemed failing at the same IP address and DNS. Associated with the E3000 laptops have their own IP which differ from the IP address of the border router. E3000 is configured with firewall No. minimum protection, for now. The reason for a minimum protection was to get the handshake between the two routers. The border router is a product of Verizon. The old router I was using is a Netgear who did the handshake with the edge router. I have the latest firmware for the E3000 version of the Firmware: 1.0.04)is build 6. Router will not handshake with wired connections or wireless. Used to connect to the E3000 laptop is running Windows 7 Ultimate. In fact, all laptops here use the same OS and connect wirelessly. I've tried the package of software provided on the site, which housed a diagnosis that apparently could not solve the problem as well. I have not idea about why E3000 not handshake with the edge router. Can we make a few suggestions. Thank you to all those who respond.
What is the IP address of the router Verizon? What you write suggests that the Verizon router uses 192.168.1.1. If this is the case, establish the E3000 as a switch simple ethernet access point as follows:
1. disconnect the E3000 from the Verizon router.
2 wire a single computer in the E3000.
3. open the web interface at http://192.168.1.1/ (or whatever the IP address you put it now).
4. on the main configuration page, make sure that your type of internet connection is on "auto/DHCP.
5. on the same page, set the LAN IP address to 192.168.1.2.
6. on the same page, disable the DHCP server.
7. save the settings.
8 unplug the computer and one of the LAN ports numbered from the E3000 wireless to your router to Verizon.That's all. Now, you can use the E3000 as access point and you can use the remaining 3 LAN ports for wired devices.
-
LaserJet 4: laserjet 4 - toner smears on the edge of the paper 3/8 "wide
Thanks in advance for your help. My trusty HP Laserjet 4 is a little sick.
I'm a smear of toner (not full black density, but rather a density of fairly uniform grey except for a dark gray line angle all 2 "in this band of 3/8") on the edge of each printed page, on the left side. It is 3/8 "wide.
When I remove the toner cartridge and pull backwards for drum making the visible green drum of the coverage, I see the toner on the edge of the drum so. I can wipe it with a non fluffy cloth and reinstall the cartridge and the problem persists even if the drum is not damaged or scratched anyway.
I just installed this new cartridge. However I bought on eBay. It was new, still sealed in the plastic bag, but I don't know how old he was. In reading my manual, I learned that a cartridge has a span of 2.5 years.
The cartridge would be too old and cause this problem, or is my oven goes wrong?
All advice is appreciated.
It is easy to determine if it's the cartridge or fuser.
Put paper in the Tray 1 and print a test page. When the test page is almost completely in the pop of the printer, open the toner access door. Now to remove the toner cartridge and look at the page inside the printer and if you see the vice the cartridge is the problem.
Shelf life of cartridge is often longer than three years, but there are some old enough for this machine, cartridges of what you have said so far, it looks like you probably have a faulty cartridge.
-
Hello
I have a Dell Ultrasharp U2415. I've read all the FAQS and I know I have to perform the SUBMISSION, but before doing so, I just want to know if it is normal to have a gap between the Windows desktop and the edge of the screen. If the Windows desktop is not covering or fill the entire screen. There all around the smaller than a 1/4 "gap between the edge of the windows desktop on the edge of the bezel of the monitor, and this model has almost no bezel. The graphics settings in Windows 10 are set to use the native resolution of 1920 x 1200 monitor. I tried with different computers (all windows 10), and the drivers are up to date. The monitor is connected via HDMI since I don't have portable computers not with DP interfaces. Laptop computers have Intel and ATI video cards. I have check the put option to scale on the video card software and it is set to 100%. So, is this gap normal? Is the edge Office Windows 10 supposed to touch the physical edge of monitors? If the gap is not normal, I will perform the integrated test.
TIA!
Based on the YouTube comments, which seems to be normal. "But you must run the APPLICATION to see if the"smaller than 1/4"gap" appears. If Yes, then we can say that it is normal. If this is not the case, then some settings of the operating system is the culprit.
-
S2440L, discoloration along the edge of the screen
I noticed a problem on my dell s2440l. It seems to be a change in color even along the edge of the screen. It is difficult to explain or to capture on camera. It is more noticeable on the shades of gray. Just check along the border of the screen in the picture. Any idea on what this could be?
The question is called "Frame shadow" and occurs over time. If still under warranty to the original purchase of Dell, Dell will Exchange it.
-
How to use controls RS-232 on the edge of Cisco 340?
Hello friends,
Can someone please advise on how to run the RS-232 commands in Cisco Edge 340 players?
I checked the Edge 340 sw configuration guide, but could not find any information related to it.
Please respond if anyone has an idea?
Hi Marc,
Where did you get this 340 edge synchronized with? If its Appspace then you should be able to use appspace to control the TV Tower on and off tension and volume on and off through appspace.
I have not tried, but you should be able to use any program like minicom to send commands from the Board Office.
-
It's maddening when you try to play one or two documents while working on anothr - I don't always want to organize my screen with windows of same size. Thanks for your help.
Click the Start button and click Control Panel.
Click ease of access Center,
Click on make the mouse easier to use.
Prevent windows from being automatically arranged when moved to the edge of the screen, uncheck the box
Apply and OK.
-
W-7 view extends over the edge of my monitor
W-7 view extends over the edge of my monitor
try to set the screen resolution , that you use the native resolution of your screen. This will vary depending on the size and the type of monitor you have.
In addition, many modern monitors have a "Auto Configure" button, or menu option. Once you have set the screen resolution press this option 'Auto configure.
Maybe you are looking for
-
Migration of data from Thunderbird problems
Hello I'm migrating to a new computer. I read the support pages that describe how to migrate a profile Thunderbird from one computer to the other. However, I'm having trouble. After that I copied my profile data to the new location, Thunderbird can s
-
Hi I'm using pages at the University and I have to use a lot of words, but pages techniques emphasize them even if they're right. I have a macbook pro, so if I press my trackpad macbook show me the dictionary with definitions of the word I chose, if
-
I got my pc hp since 2008 and I was never able to install updates. I thought it was because I was offline, and then I thought that it was because of Norton Utilities. Updates will not install!
-
need to export my PC to an ipad pistures
I want to send pictures from my computer to an ipad. I plugged in by usb and it installs the software and presents itself, but the computer can not find a path to it. I was able to send photos of the ipad to the computer, but not from the computer to
-
account lockout for unsuccessful attempts in acs 5.1.0.44.6
Hi all I have the version being ACS1121 5.1.0.44.6 on my network environment, I need to enable account lockout for internal user during a failed attempt for more than 8 times, how to get there. I could see account lockout for the administrator user a