The backup failed. Time machine could not back up on external hard drive

Similar Questions

• Back to the top: the files are not backed up on external hard drive

  When I back up my hard drive to Windows Vista, the backup (which should include my documents) works about 30 seconds and it didn't save the file created on my external hard drive of diving. The hard drive is a Seagate 160 GB with about 90 GB of available disk space. I have my using the Windows Vista program upward.

  Thanks for the help.

  Hello

  ·        Have you tried the same files and backup folder in one different location (another drive or media)?

  You can check if there are errors listed in Event Viewer related to backup is not made. To open Event Viewer, follow the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  You can also try to disable the security software and then try to run the backup utility and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• TM is not back up My external hard drive - or is it?

  Hey all:

  I have a MBP late 2011 under OS X 10.10.5.  I use an external hard drive with a partition called TM1 for time machine and I also have an external drive, called "Movie_Storage" which is basically just for iMovie infinity that I don't have the space on my drive internal.

  I'm "seeding" a new database of time machine on a new drive and he completed the first backup of the internal drive without any problems.  I then plugged the disc "Movie_Storage" and confirmed that this disk is NOT in the list of exceptions in the TM preferences pane.  I then let him back up again.  There is a lot of data on that drive, so it took several hours to complete, but there, apparently without any problem.

  Now that everything is done, open the drop down at the top and click on "enter Time Machine".  In the tree on the left, the "Movie_Storage" drive appears as it should.  To test things, I then go out TM, eject "Movie_Storage" and enter again TM.  I scrolling backwards in time to make sure that I am actually in a backup.  The "Movie_Storage" no longer appears in the tree.

  So I open a Finder window and navigate in the TM database.  When I'm in a backup, indeed, there is a folder called "Movie_Storage", and its size corresponds to the size of the content of the "Movie_Storage" (about 800 GB) disc.  Yet, I can't navigate it in the interface of TM if the drive is not connected.  Why not?

  Of course, if the original drive "Movie_Storage" dies, I will seek to restore my backup TM on a new drive.  If I can't see it in TM without the original disk is connected, it is a problem.  Advice?

  Thank you!

  The TM interface requires the thus mounted drive you can choose files to restore. You cannot select files from the TM drive itself in the interface of TM.

  You can view the files manually in the finder to see, so you know they are there. You can mount the external hard drive and test it in disk utility to see if you can select restore from.

• HP Pavilion 15 laptop: Need help, PC laptop HP Pavilion 15 could not boot from USB external hard drive.

  My desktop HP Pavilion P7-1074 4.5 years computer dropped last week. Planed to get a replacement on Black Friday or the day after Christmas. But I have to run some programs inside hard drve to the desktop computer. So I have attatched hard disk dive from my desktop to my laptop HP Pavilion 15 USB port with an enclosure.

  The laptop would recognize the external hard drive as a SYSTEM (F 62.2 MB of free space of 97.9 MB, OS (GTB-free 1.11 of 1.35 TB and HP_RECOVERY (H 1.33 GB free of 11.0 GB.))) But I couldn't find the program I want to run.

  I went into the BIOS to set the boot order to boot from USB first, but I could not get the result I expected. The laptop still start on its own hard drive. I tried all three USB ports, no one works.

  Could someone help me please?

  Thank you very much!

  Hi @db69613,

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that you need assistance with your desktop computer HARD drive that is connected to your laptop via the USB port. I'll be happy to help you with this.

  I'm just surprised at the levels of technical knowledge and technical skills that your possession. Hats off to you for this. It was very clever of you! It has been a privilege to have shared this platform with you and work with you.

  First of all, programs of a different version or windows session will not work on another computer as it was installed on the computer of origin at this time. It is an installation and application software, to the difference of the data or information that is accessible by any computer when the hard drive is connected. It is because no software installation binds the application of this specific operating system installed on this specific to the time machine.

  If the computer does not and the hard drive is accessible, all the content (such as music, photos, videos, and other information are accessible), but the programs have been installed originally are not available and will not work on any other computer when it is connected to the outside.

  However, if the hard drive works fine, windows is correctly installed, then the same hard disk can be installed on another PC of office and some of the programs should work ideally.

  I hope this helps! Please let me know how it goes. I really hope that the issue is fixed without hassle.

  To simply say thank you, please click the "Thumbs Up" button for appreciate my efforts. If it helps, please mark this as "'Solution Accepted". " If you need more assistance let me know and I will gladly do whatever I can to help.

  Please take care now and have a wonderful week ahead.

• Could not find photos on external hard drive

  I tried to improve my OS to Windows 10.  He did not, but that's another story.  When I opened my LR5, I couldn't find my photos.  My LR catalog is on my c: drive and my photos are on an external drive.  Any suggestions?

  Hey Sutherland,

  I suggest you to reconnect the images in Lightroom for the original images of your external driver.

  Please take a look at the following article: https://helpx.adobe.com/lightroom/help/locate-missing-photos.html

  Please let us know if it helps.

  Kind regards

  Tanuj Sandal

• Time machine could not complete the backup of... The backup disk image could not be found (error (null))

  Running OS 10.11.3 on my early 2011 Macbook Pro 2.7 GHz Intel Core i7 with 4 GB 1333 MHz DDR3, use Time Machine to back up to my Airport 802.11ac purchased 16/09/2014:

  Backup failed: Time Machine could not complete the backup of... Airport Time Capsule.   The backup disk image ' / Volume/Data/MacBookPro.sparsebundle ' could not be found (error (null)).   Last successful backup: yesterday at 12:17

  I can see the airport and the data file in my network.

  I immediately did a full time Machine backup on a USB key and it disconnected from my system.

  I unplugged the airport, let it rest for a minute and returned the power plug, let it settle for a green light.  I'm restarting Time Machine backup to the airport.

  I need to replace the airport?  The appliance starts to fail?  Or, it is more likely is a problem with winter static electricity that has damaged the image and reconstruction will fix all this.  Reconstruction will take about four hours with no guarantee that it will work.

  Please see #C17 in this document great support... http://pondini.org/TM/troubleshooting.html

• Time Machine could not complete the backup

  Since installing a Superdrive replacement, Time Machine is not back up.  I get an error message that says: 'Time Machine could not complete the backup "Time Machine backup disk. Full backup impossible. An error occurred during the creation of the backup folder. »

  I followed the instructions in the Time Machine error - backup failed, but none of the steps solved my problem.

  I suggest that visit you Time Machine FAQ of Pondini helps with Time Machine. It is a vast site with almost everything that you need for using Time Machine. You will not find a better resource for Time Machine in one place. Due to the disappearance of James Pondini is the site is no longer updated. Therefore, some information may be somewhat outdated.

• Time Machine could not complete the backup-backup drive is not found

  I get a message...

  "Time machine could not complete the backup to Time Capsule

  I can't find the backup disk. Make sure that the backup disk is connected, or select a different backup disk. »

  I have not had this problem before, it's all connected...

  If you have not already made a comprehensive network feeding cycle, it would be a good basic troubleshooting step.

  To turn off some appliances, you actually pull the plug on the appliance.

  Turn off all devices on your network, computers, routers, modem, printers, mobile devices, etc... in any order you want

  Wait a minute

  Turn on the modem and let it run for 2-3 minutes by itself

  Switch on the device connected to a modem and let run for a minute

  Keep turn on devices one at a time about a minute apart, until the entire network is back

  Try a backup

  Report on the results

• Why my computer will not pick up my external hard drive?

  Why my computer will not pick up my external hard drive?
  using Windows 7 sp1

  Original title: usb

  Hello Fred,.

  Windows 7 sometimes has trouble recognizing external drives connected to the USB ports. There are a number of possible corrections for this.

  1. make sure you that the USB port in question works with another device, that you know works. For example, take a mouse that you know doesn't work and plug it into the USB port is connected. The mouse still works? If Yes, go to #2.

  2 do a reset power coercive.

  1. Unplug the power cord. Then (on a laptop) remove the battery.
  2. Unplug all USB devices.
  3. Leave it alone - don't connect or reconnect the devices for several minutes.
  4. After several minutes plug the power supply cord.
  5. Then install the battery.
  6. Turn on the computer and restart as normal without plug any USB device.
  7. Connect your devices one at a time and let them install as usual.

  The external hard drive works now? If not, go to #3.

  3. I have and others have used an application of part 3, the freeware Aomei Partition Wizard, download here: http://download.cnet.com/AOMEI-Partition-Assistant-Standard-Edition/3000-18512_4-75118871.html?tag=mncol;1 (only use the Direct download link). Once installed, you need only browse the external drive and select it, then click Properties. That's all; simply choose the drive is enough to get the drive recognized by Windows 7, no formatting required.

  I would like to know if one of these methods works for you. After back here with your results.

  Kind regards

  BearPup

• I have PS4 on my MacBook Pro. I had to reinstall Yosemite, so I backed up on external hard drive. I can't make it work now. Any advice?

  I have PS4 on my MacBook Pro. I had to reinstall Yosemite, so I backed up on external hard drive. I can't make it work now.

  Any advice on what to do?

  And there it is. Photoshop CS4 migration breaks the license that gives you the error 150:30.

  You do not want to reinstall Photoshop CS4 on your disks and perform the updates.

  Gene

• I have CS5 on my laptop. I lost the installation cd. Can I save CS5 on an external hard drive to reinstall?

  I have CS5 on my laptop. I lost the installation cd. Can I save CS5 on an external hard drive to reinstall?

  Moving to download, installation, setting up

  Hello

  Please see the installer direct download: Download Adobe Creative Suite 5 products

  You can download it whenever you want and run the installer.

  Kind regards

  Sheena

• Backup Restore Time Machine does not see RAID external drive

  Hi all

  I have a problem with my iMac restore from a Time Machine backup, and I was wondering if anyone else had the same problem already.

  I had to reinstall OS X El Capitan from scratch, based on education, I received Support from Apple. That worked without problems and my iMac works fine. However, I wanted to restore it to how it was before, using Time Machine. I keep my backups on a LaCie 5big Thunderbolt 2 and never had any problems with it.

  To restore the system, I followed the instructions on the Support page. I restarted my system in recovery mode and selected the "restore from Time Machine backup". Unfortunately the LaCie 5big does not appear on the list of drives, so I'm stuck... When you use the system in normal mode, the external RAID is visible and Time Machine stores backups on it without any problem.

  Any of you are familiar with this problem? I would be very grateful if you could help me with this problem!

  Kind regards

  Valerio

  Hello

  -While the system is booted in recovery mode, confirm that the Lacie 5big network is visible in disk utility.   You will need to disconnect / reconnect the Thunderbolt cable to the Lacie 5big be detected.

  -Once seen, a new attempt to restore from Time Machine backup.

  See you soon

• 150:30 of error after you restore the backup CS4 Time Machine

  I bought a new Imac with OS X Maverick and put in place by using a backup from time machine. My Adobe CS4 now has a problem with the license and shows me the error: 150:30?

  I have to uninstall and reinstall CS4? Is there an easy solution to this problem?

  Thanks to everyone for help.

  Chris

  I have to uninstall and reinstall CS4?

  Unfortunately Yes.

  Also run the cleanup tool before reinstalling

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  Restoring backups Time Machine invariably breaks the activation mechanism (error 150:30) and there is no easy way to correct an error of 150:30 otherwise than by the re-installation.

• How do I back up to external hard drive that is not an available drive

  I have a Vista and my computer alerts me needs to back up, but fails because the "D" drive is full.  I did a cleanup and still not enough space.   I plugged my external hard drive and tried to return to the top, but this isn't an option to store up to only D.   How can I clean the drive as well as to add an external hard drive as a backup option?

  Hello

  D: is normally your partition recovery and between 5-15GBs in size.

  If the above is correct for your case, read this:

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  See you soon.

• Windows 7 Pro Backup can not see my USB external hard drive.

  This seems to be an old problem, maybe someone has a solution:

  I have a Toshiba 150 GB NTFS USB 2.0 external hard drive I used as backup when I had XP, but now I have W7 Pro 64-bit (SP1), and the backup program is unable to see the player.

  It shows in Explorer, it works very well, has write permission, but is not in the list of Backup Options.

  Player is 18 months old. W7 found and installed the USB driver for it.

  It is wired, I don't have a network.

  In addition, Windows cannot format the drive.

  I changed the drive letter of that W7, named F to Z, no go.  All I see in the backup is C and the DVD player.

  It has been suggested that I have uninstall all the drivers USB and reboot and let Windows reload them, but I have a keyboard and a mouse USB, so if I do that has no way to control the computer.

  How can I make the visible external drive for the backup program? Any help is appreciated.

  I use Ghost on my 8 month, Toshiba Satellite L755 and have never seen a conflict.  I also have it on 3 desktop computers.  For antivirus I use AVG free on 3 systems, Symantec SEP on that and Norton Security Suite on the laptop (which I get for free from Comcast).  The only thing related to security, I see in the menu start from Ghost 15 is a small window to give people access to Ghost.  He also built in the feature called Threatcon, which I've never had any message of.  Here's the info of the construction in the help.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  On Symantec ThreatCon

  ThreatCon is threat of Symantec early warning security system. When Symantec identifies various threats, the ThreatCon team adjusts the level of threat. This adjustment gives people and adequate warning systems to protect against attacks and data systems.

  When you activate the trigger of Symantec ThreatCon to a selected backup job, Norton Ghost detects changes in the threat level. Your computer must be connected to the Internet, at the time. If the ThreatCon level is reached or exceeded, the backup operation in which you have enabled Symantec ThreatCon is started automatically. You have then a recovery point to use to recover your data to your computer should become affected by the latest threat.

  Note:

  If your computer is not online, then it is not sensitive to online threats. But if you connect your computer to the Internet at any time, it becomes vulnerable. You don't have to enable or Disable Symantec ThreatCon when you go on or off line. Works if you're online, it doesn't matter if you're offline.

  For more information about Symantec ThreatCon, visit http://www.symantec.com.

  ~~~~~~~~~~~~~~~

  Good luck.