the balance - locked left/right

Similar Questions

• The function of enter the characters of left, right or middle of the member name?

  Does anyone know of a function or set of functions I can use to enter characters in a member name in a similar way to the functions of Excel RIGHT, LEFT, or MID? I would like to be able to write a rule to retrieve only certain characters in a member name.

  Hello

  If you look briefly into the ref of technology so you can find @SUBSTRING (String StartPosition [, EndPosition])

  StartPosition

  Beginning at the character position in a string to be included in the substring. An integer greater than or equal to 0, where 0 is the first character in the string, 1 corresponds to the second character and so forth.

  Final position

  As an option. An integer greater than or equal to 1, where 1 corresponds to the first character in the string, 2 corresponds to the second character and so forth. If the end position is not specified or is less than StartPosition, Essbase returns all other characters in the source string. Note that this is a different numbering scheme that uses the starting position.

  Now, I hope you have a good naming convention.

  Kind regards

  Philip Hulsebosch

• script to return the amount of left & right parenthesis & media

  The copy of ingredients below seems correct you?  Try the evidence and feel our frustration.

  Well, I tend to believe there is an extra right parenthesis, and this is a perfect job for a script. Can we make a script to return:

  Left parentheses: XX

  Right parenthesis: XX

  Left parentheses: XX

  Right media: XX

  Left braces: XX

  Right braces: XX

  or propose another method for the County / evidence. I've been the colorization of sections.

  INGREDIENTS: Dulce De Leche Caramel [corn syrup, sweetened condensed milk (pasteurized milk, sugar), water, palm oil, cream, glycerine, pectin, salt, Phosphate disodium, (emulsifier), soy lecithin, natural and artificial flavor, CARRAGEENAN and Sorbate de Potassium (conservative)], the Whip topping [water, corn syrup, palm kernel oil, sugar, contains less than 2% of the following: COPRA oil] (, (derived from A milk) Sodium caseinate, dextrose, gum Arabic, gum of carbohydrates, salt, xanthan gum, natural flavour, extracted, morning of beta carotene to rice), wheat flour, palm oil, sugar, eggs, pecan nuts, milk, butter [cream (milk), water]. Chocolate drizzle [corn syrup, water, cocoa (processed with alkali),-modified maize starch, glycerine, (conservative) potassium sorbate, artificial flavour], cocoa (processed with Alkali), baking soda, Benzoate de Sodium (conservative)

  CONTAINS: Milk, soy, wheat, eggs, Pecans

  Hi Mike,.

  It's been many moons (10 months) that I posted here. Anyway, I have been 'hidden' forums every day since and did some searching for something today and came across this thread so I decided to post. I don't know whether or not you have received one response from others (cough: Carlos ;-), in any case, perhaps this will help your efforts, otherwise, it's a basic example):

  // ---------------------------------------------------
  // Script Purpose: Check And Count All Brackets
  // Script Name: W_J_T_checkBrackets.js
  // Test Environment: Mac - Illustrator CS5
  // Forum Source: https://forums.adobe.com/thread/1564938
  // © W_J_T 2/24/2015
  // ---------------------------------------------------
  
  function checkBrackets() {
      if (app.documents.length == 0) {
          alert("Script Aborted:\nNo Open Document Found");
          return;
      }
      if (app.activeDocument.selection.length != 1 || app.activeDocument.selection[0].typename != 'TextFrame') {
          alert("Script Aborted:\nPlease select a single text frame and try again");
          return;
      }
      if (app.activeDocument.selection[0].typename == 'TextFrame') {
      // This section returns the # count for each type of bracket:
          var txtString = app.activeDocument.selection[0].contents;
          var LP = txtString.split("(").length - 1;
          var RP = txtString.split(")").length - 1;
          var LB = txtString.split("[").length - 1;
          var RB = txtString.split("]").length - 1;
          var LC = txtString.split("{").length - 1;
          var RC = txtString.split("}").length - 1;
          alert("Results:\n" + "Left Parenthesis:  " + LP + "\nRight Parenthesis:  " + RP + "\nLeft Brackets:  " +LB + "\nRight Brackets:  " + RB + "\nLeft Curly Brackets:  " + LC + "\nRight Curly Brackets:  " + RC);
          // This section returns just the brackets as a string to see the visual sequence:
          alert(returnBrackets(txtString).split('').join(' ') + "\n * visual representation of brackets");
          function returnBrackets(txt) {
              var brackets = /[^()\[\]{}]/g;
              return ("" + txt).replace(brackets, "");
          };
          // This section changes the color to RED, size to 20 and font to Verdana of all brackets in the selected text for easier finding and editing:
          // Note: However keep in mind, the execution time will increase for large portions of text when using this portion of the code.
          var redColor = new RGBColor();
          redColor.red = 255;
          redColor.green = 0;
          redColor.blue = 0;
          var txtString = app.activeDocument.selection[0];
          for (var i = 0, l = txtString.characters.length; i < l; i++) {
              var txtChar = txtString.characters[i];
              if (txtChar.contents == "(" || txtChar.contents == ")" || txtChar.contents == "[" || txtChar.contents == "]" || txtChar.contents == "{" || txtChar.contents == "}") {
                  txtChar.characterAttributes.fillColor = redColor;
                  txtChar.size = 20;
                  txtChar.characterAttributes.textFont = app.textFonts.getByName("Verdana");
              }
          }
      }
  }
  checkBrackets();
  

  I suppose it could be expanded further, but it is a starting point and could, however, be useful for your efforts. It will be useful.

  W_J_T

• Help with the page of left-right movement of objects...

  I'm on a new book from scratch.

  I noticed other books I've worked on same moving pages (text/objects) a little to the right and a little strange objects moving to the left.

  What is the standard?

  Or the text boxes should be centered?

  How much should I spend on 8 x 10 gardening book?

  Thanks for your comments...

  EXAMPLE of where there are areas more broad (the guides are on the block of text):

  

  I don't know that there is a 'standard' for this, but it's certainly not unusual that uneven on the inside and outside margins.

  The more pages in the book, more inside margin must be to keep your text to get lost because the pags are asked to dishes. I tend to use th elargest within the margin I can get away with and while leaving a sufficient margin on the outside to grab the book and turn the pages without the fingers or the thumb overlapping the text block.

  Book layout is really an art and what size pages, margins, and the bolcks text should be are very dependent on each other and on the size of the type, or perhaps the size of the type depends on other factors. The point is to make a layout that is easy to read. There are some pretty good resources online to get advice on the layout book if you google.

• How can I change the icon of left/right in the menu drop-down?

  Is it possible to add a custom icon to the left icon that appears on the menu drop-down?

  Thank you.

  Disable the icons to the right for now, and select the left icon (right click and select same icon) and apply a new image by using the populate options. And then select the icon on the right and link ArrowMenuDown.gif to a new image of the active panel.

  Thank you

  Vinayak

• How do I move focus left/right/up/down

  Imagine that you have created a customized with 5 place BitmapFields Manager placed like this:

  ..... [  ]

  [ ]  [X]  [ ]

  ..... [  ]

  where 'X' represents the selected field.

  Now normally, if you move the trackball, the focus would go in linear order in which the fields have been added to the Manager.  So, they can move from the top to the left, middle, right, and then down.

  But, given that if the trackball can move up, down, left, right, I want to be able to concentrate to the up/down/left/right of the fireplace which precede with a trackBall revealing movement?

  In the handler, I know I can get the movement of the trackball with navigationMovement().  But I do not understand what to substitute in the My Manager or fields to achieve the desired result.

  Patrick

  OK, understood the part I didn't understand the framework.  The API documentation tells you that you must "return true" to indicate that the movement has been handled with:

  protected boolean navigationMovement (int dx, int dy, int, int time status) {}
  int d;
  Block b (block) = this.getFieldWithFocus ();
         
  If (Math.abs (dx) > Math.abs (dy)) {}
  If (dx > 0) {}
  d = Board.RIGHT;
  } else {}
  d = Board.LEFT;
  }
  } else {}
  If (dy > 0) {}
  d = Board.DOWN;
  } else {}
  d = Board.UP;
  }
  }
         
  newFocus(b,_d).setFocus ();        Focus new set
         
  Returns true;        True, since we are consuming events and manages the update
  }

  So, basically, it's the only method I should use to control the change in emphasis.  This isn't at all obvious in the API, especially given the lack of mention on the return value.  Interestingly, some reminders require scythes and other true to indicate the "consumption" or the management of the event.

  Anyway, problem solved.

• Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

  Hi all

  Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

  I did program mentioned above but it does not work. Can you tell me what is the problem?

  There is no error is indicated in the program. If someone knows about it please try to find solutions and help me out of this problem.

  I have attached my program with this message.

  Thank you in advance!

  (1) FOR loops are your friend here.  You can make a slight restructuring using loops, and then you will have less mess to deal with, the inner loop through tunnels of autoindexing to make it even simpler.

  (2) I would only treat the numeric values of the characters.  So go terminal of control of the chain, the capital letters and byte array to before the outer loop.  You can use a size of Board over there to tell how many times the outer loop to iterate.

  (3) the Index table is extensible.  So you only need over the index of the first, and it will increment itself, as it develops.

  (4) you need to finish the lookup table (table 3D)

• My laptop continues to turn upside down, left or right when I press the left/right click or even move my screen a little.

  My laptop continues to turn upside down, left or right when I press the left/right click or even move my screen a little. My problem is not how to go backwards, his way to completely stop it help please?

  Original title: windows 4540 s probook

  Hello

  What version of Windows are you using?  Windows 8?

  Right-click on the desktop > select screen resolution

  Uncheck allow the screen to auto-rotation

  Click OK

  Using the keyboard:

  Winkey + O (letter alpha) is to switch the feature off or on

• I can't type capital letters c, d, e and the sign of the pond (think they are right?) using a shift key. I can type these letters if I use the caps lock. Do I need a new keyboard?

  I can't type capital letters c, d, e and the sign of the pond (think they are right?) using a shift key. I can type these letters if I use the caps lock. Do I need a new keyboard?

  Optionally, before buying a new property you can try to give you a good cleaning.  They are pretty easy to disassemble and reassembe, all you need is a screwdriver

• Whenever I have check the regional settings to enable the Arabic language (from right to left), I get a dialog box insert the CD I did not!

  Hi Srinivas

  I have the same problem, my company is located in Singapore and I ' am assigned to Saudi Arabia, and I need enable the Arabic language (from right to left).  Whenever I have check the box in the locale, I get a dialog box insert the CD I did not!

  Now, is there a link I can use to download this file, preferably through your site (to not be deceived by the other download sites) even if its price?

  Thank you

  Sammi

  http://support.Microsoft.com/kb/821080

  You need your XP OS CD it can work if you borrow one.

• where are the action buttons left and right on the touchpad on HP ENVY 17 Quad TouchSmart t

  My new mobile Quad TouchSmart HP ENVY 17 t has a touch pad, but no action left or right buttons.  How can I simulate their action.  Apparently a single tap simulates a left click, but how to do a right click?  How to drag a cell in a worksheet (to copy) using the touchpad?  I may end up using a mouse.

  I believe that this model has a ClickPad, which has no buttons left/right click separate but has left/right click zones where the buttons would normally be. For more information, see use and configure the ClickPad .

• Cannot display web pages on explorer 8 without using the left/right scroll bar.

  I rebooted my system yesterday and now when I visit a web page on explore 8, I have to use the left/right scroll bar to view the entire page. Before I rebooted and am went full-screen page would correspond to the size. The graphic and type are larger, and I wouldn't change a thing.

  On the command bar, there is a marked entry Page.  Until it clicks.  (If you do not see this, right click on the toolbar of the tab and then click the command bar to add it to the other toolbars).  Now, go to Zoom and the size of the text and set each as required to get the page fit on the screen.  For me it works with the format as smaller text and 150% Zoom, but it may be different for you depending on the size of your screen and your graphics hardware.  If it's just a problem of zoom (and you don't need to adjust the size of the text), then there is a Zoom control on the right-hand side of the bottom bar State which also allows you to adjust the Zoom level on what meets your needs (and there are a little faster to join then the menu bar).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Mode Dual monitor: can I extend the main display from right to left?

  I have a Setup dual monitor with

  Main screen with desktop computer: Dell S42092

  Secondary display: Inspiron notebook.

  Is there a way to extend from left to right?  I wish I had my secondary screen (laptop) positioned on my left, not the right, which seems to be the only way that the configuration of the resolution of the screen allows you to do.  I currently configured as

  Display (2) Dell s24092

  Several screens: extend these screens (this allows me to drag from left to right, which is not intuitive if the laptop is on the right.

  If I can't do it with this configuration, this work with another monitor, type?

  Trudy-o

  My OS is Windows 7, but I've been to the screen "Changes the appearance of your poster" you describe.

  It identifies the laptop as monitor 1 and the S24092 Dell Monitor 2. It allows me to do 1 or 2, my main screen, but it does allow me to pass the identity of 1 and 2.   Therefore, any screen is my main screen, management of drag forces me out of the side right of the main screen (the great Dell) before entering the screen of the computer, which I turned to the left.  I am left handed and I smile with my left hand, and I'd rather have my secondary monitor to my left.  Is it makes sense?

  The identity is to tell you, visually, that is, whose number has no significance. The computer screen will always be 1 and the outside will be always high because you can not disconnect and because it will be the first computer find at boot.

  To put secondary (2) on the other side, press the image of monitors, monitor 2 drag it to the other side of the #1 and press apply then / adjust displays are flashing and if he succeeds, it will appear a window with a 15 seconds timer to reset the display if no one pressed the Yes button.

  Basically, you want to match the image with your configuration.

  I'm left-handed too, but use the mouse with your right hand. and I have a laptop with Vista and an external monitor (primary) to the left of the laptop.

• How to disable the gesture left right app cascading

  Hi all

  There is this left right gesture to return to the previous screen by default.

  How can I disable this gesture to avoid the service back when the user slides to the right?

  Thanks in advance.

  Hi jessica,.

  Add the property:

  peekEnabled: false

  for your tabbedPane or navigationPane.

  I hope this will solve your problem.

• How to catch the event up, down, left, right button. Help me!!!

  I want to catch even down, left, right, I coded like this:

  {} public boolean keyChar (key char, int status, int time)
    
  If ((key==Characters.CONTROL_UP) |) (key == Characters.CONTROL_DOWN) | (key == Characters.CONTROL_LEFT) | (key is Characters.CONTROL_RIGHT)) {
  Dialog.Alert ("Move");
  Returns true;
  }

  If {(key is Characters.ENTER)
  Dialog.Alert ("Enter");
  Returns true;
  }

  Return super.keyChar (key, status, time);
  }

  But only Characters.Enter can be caught, but Character.CONTROL_LEFT, on the RIGHT, upwards, downwards cannot be caught. I work with BlackBerry 8820 Simulator. Please help me. Thank you

  navigationMovement() "listener" is what I think you need.  Search through fields and the things that are derived from fields (such as the screens).