The balancing load ISE 1.2 and Jgroups
Hello
I want PSN of balancing nodes. Rather than use a loadbalancer in that I use Jgroups I saw version 1.2 presentations. However I'm unable to find information in the guides of configuration detailing how to design and configure this feature. Has anyone seen more in detail? It is even possible to use this feature for balancing without a loadbalancer as an F5 or I misinterpurated the purpose of Jgroups?
Thanks in advance.
a group is how to synchronize db / replication work in 1.2, which replace the queues mechnism in point 1.1.
but this should not be linked to PSN LB? do you mean you want to LBS applications between several PSN?
using F5 or ACE can help, also 1.2 support wildcard certificate will help address the cert WARNING problem.
Sent by Cisco Support technique iPad App
Tags: Cisco Security
Similar Questions
-
iMac restarts after 5 minutes of the heavy load of CPU/GPU and noisy fan
Hello
My iMac (late 2012 if I remember) restarts when under heavy load for a while.
I work a lot with Final Cut Pro X.
Whenever I have add clips in an event, Final Cut allows you to copy and then transcode and analyze the clips, and this task's CPU/GPU intensive (Final Cut Pro X uses OpenCL, where CPU/GPU). After a few seconds, the iMac fan begins to be really strong and seems to reach its maximum speed.
Then, after a few minutes of this heavy burden, the iMac simply restarts, and the fan slows down and stop. After the reboot, everything is back to normal, with the exception of the warning illustrated by Mac OS X, who said that the closure was not planned.
I'm sure that this behavior is not normal. I don't see why a computer should reboot/crash when under heavy load.
Note: you can also, to transcode some clips or movies I used the excellent software called Handbrake, using CPU only encoder ffmpeg, and I don't remember having accidents even if the CPU has been loaded and FAN running loud too. So maybe it has something to do with GPU?
How can I understand what is happening?
Thank you very much.
Thomas
First try to reset the SMC reset management system (SCM) controller on your Mac - Apple Support
If continuous reboot to run the Apple Hardware Test mode extended using Apple Hardware Test - Apple Support
-
Satellite L50 - B fan works even if the CPU load is very low
I recently bought a Satellite L50 - B and I made a Windows 10 updated. The problem is that the fan works even if the CPU load is very low and the noise bothers me a lot.
I ordered the video card driver and the system tells methat driver is updated to the latest version.
I don't know what I can do to change this sad situation.
Please, please, could you help me solve the problem?
Thank you very much for your support and understanding.
I await your quick response.
Thank you.
Giovanni SpinaWhat CPU temp? Probably overheating?
Try to replace the thermal interface on the CPU. ;-) -
We would like to set an element that has a primary Classification as "Tax Deduction". I try to use the balance screen people setting > enter and maintain > transfer > others > adjust the balance. but I do not see the item in the lov.
How can we adjust the element?
Thank you!Two things-
If these donot have a link to the element, then they will not be included in the list. All indirect items does not have a link to the item.
Create links from item for them or a better option would be to create one more element (same classification) just for the setting (check setting only when the definition of the element) and then use it to adjust the balance.
Make sure that the balance is based on the Classification and not individual workflows. If it is individual RSS add the new item to the RSS of balance.Hope that helps,
See you soon,.
Vigneswar -
To balance the load or not load balance? ISE and F5 Big IP
My team is currently negotiating to put our two devices of ISE (nodes PSN) behind our F5 load balancing deployment.
Our network is relatively small (5K users) with a small deployment wireless (Cisco 4 controllers with 300 access points). Growth of the network should remain relatively small in the years to come.
We will deploy Dot1X wired, followed by reclamation and the assessment of posture. (BYOD isn't an option).
On the one hand, the characteristics of Big IP could make it easier for us to perform load balancing, maintenance and troubleshooting.
On the other hand, the Big IP adds another layer of complexity in an already complex deployment. We already have the ability to balance the load of the switches themselves. Load balancing for the wireless should not be a problem that our deployment is very small and I expect to stay that way. Given the size of my environment, it seems to be relatively little to gain for the additional efforts and the potential pitfalls.
Someone at - it care to share their honest opinion on this issue?
Thank you
Phill
Load balancers are elegant and do their job well when it comes to distribute the load between servers. You already have a then I would use it if you have technical skills to set it up.
That being said, if your team is not 100% comfortable with F5 then you should certainly jump. Instead, you can configure your WLCs to use as a primary and secondary Radius Server node #2 node #1 , then your switches use Node #2 as primary and secondary node #1 .
I hope this helps!
Thank you for evaluating useful messages!
-
The storage load balancing process
We have a group of 4 members, total approximately 30 TB of space. In the past, we had a lot of volumes of 500 GB for ESX, after the installation of the ESXi5.1, we use higher volumes, about 1.5 TB. So there are a lot of changes in the storage pool. We find that the EQ is balancing of storage compared to 4 members as expected. We thought it was over two or three days agoo, but now he's balancing... then again for a couple of day all volumes are spread over 3 members, also, as expected, but he decides to charge storage it swings again... and again... It is coming to an end sometimes?
We have another group with 4 members and also the same amount of space, but it we do not use the 1.5 TB volumes again... here, we see that EQ is continuous storage load balancing pool.
Im not worried yet :)), but whenever volumes are redestributing compared to members, it does not follow on some reconnects for ESX as the part of a volume can and will reside on another Member where on that time esx is not a connection to that session at that time.
Hello René,.
It will not be stuck in a loop. Part of the balance to the maintenance of free space between the members. So when several pages are written to a specific member, space balancing will create plans to move the blocks to the other members to free up space on this member. It's an ongoing balancing act. In addition, extended periods of heavy i/o load balancer Advanced Performance will swap pages in order to compensate for the latency between members.
Kind regards
-
I'm looking for the "VDM Load Balancing Guide"
Hello!
I'm looking for the VDM Load Balancing Guide, who was in "https://www.vmware.com/files/pdf/vdm20-load-balancing-guide.pdf" a few years ago?
Someone does have this document and can give me?
Best regards
André
First success on the googles:
-
For connection to the server load balancers and server security
Did anyone used the Barracuda Load balancers in their view environment. I'm at the point where I need the redundancy and load balancing. I have used Barracuda b4 for webserver load balancing but seeks information associated with discover.
Aside from that, what are your experiences with others like F5, Cisco or any other.
Thank you!
Larry B.
We use virtual appliances of LB of Riverbed Stingray (previously ZXTM Zeus) for some time now for the view and many other services and never had any problems with them. They also offer the same thing in a tin can.
They have a huge amount of functions of management traffic, GLB, Application aware, the unloading TCP & SSL, etc, etc..
Here's a link: http://www.riverbed.com/us/products/stingray/
Good luck finding the right solution for your needs!
-
How to check the webnode load balancing?
Hi I know where my corrections are load-balanced in all nodes in my web.
For example, I have 3 nodes of web (web1.example.com, web2.example.com, web3.example.com)
How will I know if my new connections are routed to all nodes in the web.
AND how do I know the number of connections from different nodes.
Thank you
PrasadHi I know where my corrections are load-balanced in all nodes in my web.
For example, I have 3 nodes of web (web1.example.com, web2.example.com, web3.example.com)
How will I know if my new connections are routed to all nodes in the web.
AND how do I know the number of connections from different nodes.
Check Apache log files on each of the nodes (error_log * and access_log *) and you will find the entries you want.
You can also get more details the software load balancing.
Thank you
Hussein -
Lets say I got a $10 gift card balance and I want to buy something will be only charged debit card 10 cause of $20 s $ of the balance of the gift card?
Unless it's a gift card or otherwise indicated, the debit card will be charged $10 plus tax on this item.
(143858)
-
I bought a gift card a while and now I don't have the balance for her and when I try to buy I can not because I already bought it. Help, please. If I can't do my 15 birthday money are wasted. He said as I already had a gift card in my account, but somehow everything is over now when I was not yet buy anything!
A gift card is redeemable only once, it is useless to try to buy it back again.
To see what, if any, balance you have left on the account you share you: see your credit balance - Apple Support iTunes
To see what you bought on the account and therefore potentially used some/all of it: see your purchase history in iTunes on Mac or PC - Apple Support store
-
My iPad will not normally charge. I tried different cables and Chargers. I plugged the iPad to iTunes and reset a DFU. After only a few hours the iPad finished reloading all software and reloaded new apps, it had also charged the battery but the problem remains, I still can't load the iPad normally. Any help out there?
There are very few things that keep loading an iPad. Some of these (other charger plugged into a good outlet, different cable) you have already tried. Others are:
1 dirt, lint or fuzz in the port of loading of the charger or the iPad. Check and clean carefully if necessary.
2. a software failure. Reset the iPad. Press and hold the Home button and the sleep/wake button until the Apple logo appears. Then release the button and let the appliance restarts. You lose no data by doing this. It's like a restart of the computer.
3. failure. Make an appointment at an Apple store to have a technician look at your device. Or contact the Apple Support.
-
I bought the IPad Pro 128 GB on 3.29.2016. I used it for less than a week. It charged when I first opened it from 67% to 100%. 9.3.1 update. After about 5-6 days, the battery is down to 1%, and now it will not load. I have reset to factory settings and it still doesn't load. There's just 1%. Help, please.
Thank you
Katie
It is under warranty. Suggests taking it for an Exchange.
-
I worked on the Web site of our Church and all of a sudden this week, my computer does not connect to the site. I get a message saying that the connection to the server was reset while the page is loading. Can anyone has any ideas on how I fix?
The error message "the connection was reset" can be caused by a bug for the attack of the BEAST fix (browser exploit against SSL/TLS) that the server does not support.
-
Help, please. www.madpandastore.com it worked fine until a few days ago, nothing has changed with my firefox or my website. I tried deleting all hides and cookies, restarted my computer, etc.. Nothing is going to make this page load. It crashes just without error just permanently, it charge anything.
Reload Web pages, and ignore the cache.
- Hold SHIFT and click reload.
- Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
- Press 'Cmd + Shift + R' (MAC)
Loads for me very well, but is not correctly displayed for me in Firefox 3.6.24
I need to add a style rule to display this page correctly.
@-moz-document domain(www.madpandastore.com) { #rt-sidepanel-surround { clear: both } }
Maybe you are looking for
-
Hello On the help page for Firefox reset to original settings, he suggests going to the top of the page and clicking on Firefox (orange icon). Unfortunately, I can't find this header that would lead me to the help page for resetting.
-
Why the icloud - pc - calendar does not show subscribed calendars
I use iCal on my iPad and iPhone and a link to the iCloud calendar via iCloud for windows on my PC (win10). All manual calendars sync smoothly between different devices, but calendars subscribed, I've implemented on the iPad now appear on the PC. I
-
Satellite A500-1pj - no image on LCD TV via HDMI
Hello world got a new Satellite A500-1pj and tried to connect it via HDMI with my Toshiba LCD TV 42XV635. Incredible, but it does not work. What is happening is that the TV detects the laptop and the screen goes black but no office or something else
-
The upgrade from Windows 95 to XP
I have an old Windows 95 computer, and I was wondering if it was possible to upgrade to run Windows XP.
-
Cannot install updates on shut down
I have two problems, first of all updates that have completed will not completely refresh when I shut down my computer, and secondly, I have 6 new updates important which will not install, in both scenarios, that it sticks on 1 of 6, and the only way