The battery icon says connected does not support

When I clicked on the battery icon that he read plugged not supported. I turned off the computer & pulled the battery, then I held the Start button for 10 seconds, put battery back in & read it plugged in charge.  The next day, it was the same probleThe computer is the Pavilion 10. Looks like a domestic framework does not work. Any suggestions would be helpful.

Original title: battery icon says not connected charginr

Hi nancypalmiter,

1 - is your laptop battery charge when turned off?

2 did you do changes on the computer before the show?

Sometimes, the problem may be with the laptop. The battery isn't bad, but it could be a loose connection or hardware problem with laptop. It will be the right idea to get the material under test if the battery of the laptop is not getting loaded even if the laptop is turned off.

You can also try the BIOS update and check if it helps. You can get in touch with the system manufacturer for assistance for the update of the BIOS.

Warning: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

Reference link:

BIOS: Frequently asked questions

http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

Additional information:

Battery not power Notebook or hold a Charge

http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00259897

Hope this helps and keep us informed if you need help.

Tags: Windows

Similar Questions

  • Error: "saying editor does not support the download" while trying to install iTunes

    Original title: download itunes 32-bit for windows 7

    I am struggling to download itunes on the web, I'm in South Africa and consulted the site of SA and the site of the United Kingdom; both sites give me an error msg saying editor does not support the download. my pop - Blocker is set to medium as advised. My PC is 32-bit, and this is the version im trying to download. I don't know what else to do

    Hello

    1. what browser you are using to download iTunes?

    2. What is the error message accurate/complete that you receive when trying to install iTunes?

    3 is the issue limited with the iTunes application?

    4. have you made changes on the computer before this problem?

    Method 1:

     Run the Microsoft FIXIT from the link and if the problem persists.

    Solve problems with programs that cannot be installed or uninstalled

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

    Method 2:

     I suggest you to follow the steps from the link and check if it helps.

    Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

    http://support.Apple.com/kb/HT1923

    Method 3:

    If the problem persists, I suggest you to contact the Apple support for assistance.

    http://www.Apple.com/support/iTunes/

    Hope this information helps.

  • I have redownloaded my CS5 Photoshop and Camera Raw will not accept my RAW files or Adobe Bridge displays the display of the image of these files. A message appears saying: it does not support this camera.  I have a Nikon 5100 digital SLR.  He has always

    I have redownloaded my CS5 Photoshop and Camera Raw will not accept my RAW files or Adobe Bridge displays the display of the image of these files. A message appears saying: it does not support this camera.  I have a Nikon 5100 digital SLR.  He has always displayed them in the past.  How do I get to view these photos in Bridge, then open them in RAW?

    Your Nikon 5100 requires a minimum of 6.4 ACR.

    The ACR, which is installed with CS5 default is 6.0.

    You must update your ACR to the latest version available for CS5 - ACR 6.7

  • Click on the Photo icon and it does not open. I recently downloaded and installed El Capitan and it seems to have slowed things. How can I solve this problem?

    I click on the Photo icon, but it does not open. I recently downloaded and installed El Capitan 10.11.5, and I wonder if it is slow things down.  My iMac has 2 GB of memory and 124,75 GB of free space. Picture worked fine, then I wonder what is happening. Can anyone help?

    Yes, it's probably slow things down a GB of s2 on memory is the absolute minimum - you need to update your memory which is cheap and easy - a reasonable and a reliable source is Other World Computing- there are others including Apple

    LN

  • When I start most of the programs that is lock and on the taskbar it says program does not. How can I stop this from happening?

    When I start most of the programs that is lock and on the taskbar it says program does not.  How can I stop this from happening?

    Original title: Windows Explorer

    It is a good number with a boot drive (C:\ drive) that is cruelly of free space.

    A healthy walk NEEDS 20% free space at least to work properly and prevent your suspension system.

    Several causes are possible, but check your free space. Upgrade your hard drive if necessary.

    More RAM might help too.

    Check these before you attempt to update or install anything more.

  • Do not use the Brink game on my computer laptop-message of error: the current video card/driver does not support openGL3.1 or newer.

    I bought this game for my son who has installed ok. But when pressed on play error message: the current video card/driver does not support openGL3.1 or newer.

    We have Windows Vista SP2. Does this mean I now have to buy a video card or y at - there a way around this without costing me more money?
    Kind regards
    Sam Towle

    Hello

    I would suggest trying the following methods and check if it helps.

    Method 1: make sure the game is compatible with your computer.

    Method 2: update the video card driver and check if that helps.

    Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

    If both methods fail, you will then need to get a new video card.

    I hope that helps!

  • portable computer does not support. Yet battery monitor says "plugged in, not support.» What are some options?

    my laptop is connected, and yet power monitor says "plugged in, does not support." What are some solutions?

    Hi Joseph,.

    Something similar just happened to me. The first time they fixed it, they have replaced the adapter and the problem is solved. 5 months later it started to happen again and this time they replaced the battery, the motherboard and the milling table (thanks to heaven, it is still under warranty). Fortunately, thanks to the new adapters, battery started to load and the experience does not seem to damage it in any way (but you should keep your eyes on it anyway just in case).

    How they were able to say on my laptop - a Dell E1705 (other than just experience and common sense) was to go into the BIOS (starts, it should be a brief Flash on the screen telling you how to enter the BIOS setup or menu of the BIOS (usually F2) and check the battery information. He showed that the power adapter 'unidentified' instead "90W" list which should be when it is working properly and that the battery was not complete and not charging well plugged. They changed the motherboard and the roll the second time because it could also cause the adapter is not being recognized by the battery (or battery not not recognize the adapter).

    The beep is caused by power and its configured settings to warn you of a low and critical battery condition. In a normal situation, the computer will work right next to the power adapter and does not the battery (it is a way to help maintain the battery life is to run periodically and refill if we leave normally plugged in most of the time). If you remove the batttery entirely, the laptop will power? If this isn't the case, it is certainly at least the adapter or the motherboard. Eventually the battery will get if low, that he's going to sleep or hibernation, or the system stops (you should shut down normally before him to cold shutdown like that). If If, then I expect the tone to go further because it will detect is no longer a low battery charge, because there is no battery - but then you'll want to be sure to use either a battery backup UPS, or at least a surge protector otherwise already in place because if you lose the laptop battery will crash hard and this is not good for her.

    I'm using 32 bit Vista Business SP2 and in Control Panel / sounds / Sounds there is an option for low battery alert. The default to have this. In this case, you can turn off to avoid the beep. In addition, you can go into Control Panel / Power Options, click the plan settings and click on battery. It will provide you with levels of low battery and critical battery and you provide measures to be taken in such a case. If you are unable to operate the system without battery and it is so weak that the alerts began, you probably fell to 11-5% remaining. You can adjust actions to nothing for bass and stop to criticism that 5% is about as close as you want to get to the point where you can hang. Then, you just need to wait until it is repaired and the appropriate parts are replaced.

    Even if you have still some life in it, it is best to contact the manufacturer (they the some have the right parts) or a computer of reputable workshop to get a good diagnosis (perhaps by phone at first), a determination of what must be fixed, the applicable fees, schedule, if it is still under any kind of warranty , and what needs to be done in which order of repair. They can find the adapter is OK and it is just the battery (or vice-versa or two or more). But that's essentially where you need start.

    I hope this helps.

    Good luck!

  • can't see the photos sent by e-mail. I'm with windows media player and it says it does not support the format, or the file is corrupted.

    the Player Windows media doesn't let me see the photos sent by e-mail. says unable to read file [oxcood1199]. State id oxoooooooo. does not support the format or corrupted file. the file is not corrupted. can not send email. just started using a hotmail account.

    Install Windows Live Photo gallery from the link below

    http://explore.live.com/Windows-Live-Photo-Gallery-XP

    Good luck!!

  • I downloaded the Wizard twice.  I also downloaded the latest adobe player, and he says it does not support this file

    How to open items 12 now that I downloaded the Wizard twice and the latest adobe reader.

    It is said that it does not support this file.  What is the problem?

    before trying the 12 elements I had tried elements 7, and it worked...

    Hello Janet,.

    Adobe Reader is designed to read pdf documents.

    What is the type of file you are trying to open.

    After you download PES 12, you will need to install for will be happy to use it.

    It appears in the list of installed programs?

    If yes then what is the error you get when you try to run the software.

    I would also like to know what operating system are you using.

    Kind regards

    Rave

  • HP dm4 connected does not support

    I turned on my computer today and my battery did not work at all. The computer will be ony work when I have the AC adapter is plugged. I hover over the battery icon and it says 0% available (plugged in, does not support). I had this problem before, but I'm not quite rmember how I fix.

    I tried to uninstall the Microsoft ACPI driver and rebooted the computer several times since then with no luck.

    I ran the HP battery check and ended up getting a code of failure REOOW. I'd be inclined to think that the solution would be to replace the battery if it wasn't for the fact that this happened to me once before, and he started working normally again.

    In addition to that, usually, when a battery goes bad the battery life gradually worsens until he hardly hold its charge. It wasn't the case with me. I'd get again until about 3.5 hours of battery life in use until this problem started suddenly.

    I would just buy another battery to be sure that wasn't the problem if it wasn't for the fact that I can't really afford one right now. If anyone has any ideas on how to solve the problem, it would be greatly appreciated.

    786 is a large number of cycles. We continue to look for something exotic or simply decide to go with the odds.

    I gnerally does not recommend batteries "knock" off you get on eBay. You might get a message 'authentic not' nagging of the HP software on the computer. However, an analysis purely "bang for the buck" and for an older machine, they are a viable option.

    You have not given your exact model number, but I think that all dm4s use the same battery. Hard to beat $14.35 shipped:

    http://www.eBay.com/ITM/new-battery-for-HP-DM4-586006-321-586006-361-593553-001-MU09-/200794923427?PT=Laptop_Batteries&hash=item2ec04f61a3

    Just check your part against the compatibility list number. You will certainly find one that will work for less than $20, shipped to the United States.

  • The battery of my computer does not load. I changed the battery and I changed the AC adapter, and I always get this message: "0% available (plugged in, not supported)" I don't know what the problem is.

    My computer the battery does not charge.  I bought a new battery and I changed the AC adapter but the battery still won't charge.  This is the message I get:
    0% available (plugged in, not charging) don't know why.

    Hello

    1. What is the number of brand and model of your computer?

    Let us try the steps mentioned below to see if the problem is resolved.

    Step 1:

    a. Click Start; type devmgmt.msc in the start search box and press ENTER.

    b. expand the batteries category.

    c. under the batteries category, right-click in the list of Microsoft ACPI compatible with battery control method and choose uninstall.
    WARNING: Do not remove the Microsoft AC adapter driver or any other compatible ACPI driver.

    d. on the Device Manager, click Action and then click Scan for hardware changes.

    Windows will scan your computer for hardware which has not installed the drivers and will install the necessary drivers to manage the battery power. The notebook should now indicate that the battery is charging.

    Step 2:

    If this does not work, try power cycling of your laptop by following the steps below.

    a. remove the battery from your laptop, and then press the power button to all 15 sec.
    b. now connect to the battery and check if it works.

    I suggest also, please contact your computer manufacturer to see if they have any suggestions about it.

  • Media Player says it does not support the file

    my Media Player says that he dosnt support file for videos of children? It allows to play, but some how it used now, im dumb, what should I do to change the format so thing computers can view them again?

    Hello


    If I understand correctly that you are unable to read a file through Windows Media Player, because it is an error message saying that the file is not supported. However, you could read the same file before, is this correct?

    Please post information for a better understanding of the issue.

    1. What is the format of the file you are trying to read or file extension?

    2. are you referring to a file played on a CD / DVD or stored on the computer?

    3. What is the exact error code / message appears when you try to play the file?
    4. What were the recent changes of hardware or software that are performed on the computer before the question?

    You can deal with this issue

    a. file corruption

    b. incorrect Windows audio Codec

    c. the file (if it is available in the Windows media player library) is moved or deleted.

    To begin to solve the problem by checking the Windows audio codec and the basic settings.

    Method 1

    Step 1

    Windows Media Player invalid file Error Message Format

    Step 2

    Error message when you type the name of a file to play with Windows Media Player: "Cannot open file."

    Also try to run this program fix.

    Solve the problems of Windows Media Player video and other media or library
    Method 2

    If you are still facing questions, see file types supported by cheque and Windows media player

    Information on the types of media files that supports Windows Media Player

    Try to reset these settings if the file is a protected file.
    Windows Media Player Error Message help
    Also try to install this Codec pack

    Package of Installation of codec

    Hope this helps
  • This just started today. On Firefox, the encrypted images and the www are grey. When I click on the symbol, it says connection is not encrypted. Hacked?

    Photos of encryption and www work on IE.

    You no longer see favicon for the site on the address bar, but you now see an icon that indicates what type of connection you have.

    With an http connection unencrypted normal, you see:

    • This Web site does not provide identity information.
    • Your connection to this Web site is not encrypted.

    Only an encrypted HTTPS connection can provide additional information.

    The change was for reasons of security prevent spoofing the favicon as an icon of padlock on websites.

    See the Site identity button:

  • I get the error message saying twtter does not recognize my e-mail account

    I tried to connect to my twitter account and it keeps saying that twitter does not recognize my account. How can I fix it? can I call twitter?

    Hello

    Please see the following link for assistance Twitter.

    Twitter Help Center:
    http://support.Twitter.com/

    Concerning

  • Pavilion 15: Laptop HP Pavilion connected does not support

    Hi all

    I have a "HP Pavilion 15 Notebook PC' with Windows 8.1 and almost two years.  A few months ago, I had my laptop on my lap and it randomly turned off, once again did not higher than approximately 84%.  Every now and then I would plug in to charge and he said "plugged in, not load ' so I solved the problem by turning off the coast, taking the battery, turning on, uninstallation of Microsoft ACPI-compliant stack method, turning off putting, the battery back on, the BMCC ACPI would day and she charged up about 84%.

    Since about a week ago, which has stopped working. I tried to update the ACPI-BMCC, do the above, several times, and nothing works. I noticed the recommendation for the utility of battery HP but 1) who has not worked in the past, when he would not load completely and 2) the computer has a 0% load and will not hold a charge, so the step where it says turn on unplugged, my computer won't turn on.

    After trying to use the utility of battery HP a few things happened. (1) I have to hit the ESC key to access the menu, by pressing on it when the logo appears as it says has no effect. (2) when I tried to run the battery test, it says 2 minutes from the end and 1% complete before freezing the computer upwards and after pressing the power button it instantly disabled.

    I don't know if I need to get a new battery or if I just try something, I didn't get even.

    Thanks for your help.

    -Kadratos

    Hello @Kadratos,

    That information is a strong indication that the battery needs to be replaced, it is not read correctly.

    Using the product ID you provided that I could find the maintenance and care for your laptop computer guide.

    HP Pavilion 15 Notebook PC Maintenance and Service Guide

    On page 47, the battery part number is listed:

    4 cells, 41 WH, 2.8 Ah, Li-ion - 756743-001 battery

    If you have purchased an extended warranty with Notepad, you can call HP Support:

    Contact HP worldwide

    If not, you can buy a battery of the user part of HP or other trusted shopping sites, using the battery part numbers: 756743-001

    HP part Surfer

    Have a great day!

Maybe you are looking for