The beeps from the BIOS and graphics problem
1. when I start my computer (h9-1350), I get 6 short beeps, the computer is for a just half a minute, then continue to boot normally. I think it has something to do with a keyboard. I tried two different keyboards... KB USB provided with the computer and solar keyboard K750 from Logitech. He also sometimes appears an error message that I did not copy but the message said something about a keyboard.
2. I can't get into BIOS to do the steps from HP FAQ Web site provides for the installation of a spare video card. As does the 6 beeps from the computer and then boots normally apparently it does not the button configuration screens to access the BIOS.
The computer is a HP h9-1350 with Win8.
Windows 8 / HP w2207 monitor / Radeon 6870
Keurig ready for a coffee or Cup of hot tea
Okay, I think that we have a fix/resolve. I found the LEGACY (just above), set it to Enable. I replaced the OEM video card with my Radeon 6870 and it booted right up less beeps. Thanks for the help.
BTW, where can I find more information about this 'new' (for me at least) UEFI BIOS? I had no idea what Win8 make this change.
Tags: HP Desktops
After twitter @DellCares, DELL-Kiran K suggest me restore the bios and the last thread PSA: http://en.community.dell.com/support-forums/laptop/f/3519/p/19508371/20373155.aspx
Here is the result.
1. the restoration of the bios
After the restart, there is still no GT650m detected by the operating system.
2. PUBLIC interest message diagnose
the result shows that the video card is installed but only 64 MB of video memory that is certainly not the graphics card of GT650m to the dedicated address.
I was trying to install Win7-64 on this 200-2b09WM. I flashed the bios, and now BIOS can even see hard drives.
I used the 67259.exe softpaq file
Any ideas on how to solve this problem because I can not install andy BONE and can not boot from floppy, cause there's not?
Have you tried to boot with the Windows disk since the last error? If this laptop comes with Windows 8, it can have Secure Boot enabled to avoid booting from cd/dvd. Check the BIOS.
Hi, I'm going to do a clean install of win. 7 home Premium and I would like to upgrade the Bios and installing a hard drive SSD 120 GB and 2 GB of ram.
5226Model #: CQ5226UK
Product #: VS273AA-ABU
Serial No.:[personal information deleted]
Software Build #: 94WEv6PrA3
Service ID #: 111-709
3200AAJS-60M0A0 320 GB WD HARD DRIVE
Intel pentium dual core 2.6
PC built Sept 2009
I looked at the Hp site but could not find an update for my bios. Mobo is Foxconn Eton 1.0 and the Bios is FRIEND 5.05 25.09.2009
A scan utility (Bios Agent) indicates that there is an update, but they require payment for flashing the bios. In case I have some concerns, and many would prefer to download Hp or Foxconn. I looked on the sites Web from Foxconn and FRIEND, but they require a lot & a lot of information that I don't have and don't know where to find them. I was hoping someone might have the same PC to give me information.
Also to install the disk SSD drive I brobably would need an adapter to allow the reader to 2.5 inches to fit into the drive 3.5 "bracket. Apart from this, the connectors on the SSD drives all seem to be the same. is this correct please or will it take a SSD and a specific to my PC case and my existing hard drive adapter.
Hi thanks for your help, advice and information: my PC was purchased in January 2009 is a little more than 4 years. The upgrade would cost 130 pounds. I could not buy a decent PC with 4 GB ram and an SSD for under £500. I do not download music or movies, or make more than a small base video editing so I'm sure that with these improvements, there will be more than enough for me.
One thing doesn't bother me. It seems that when buying a PC Bios updates are available for the first 2/3 years, but not thereafter. It would not have occurred to me to look for an update of the bios, during this period just simply because I thought that they were issued only when necessary to take into account improvements and new technologies so thanks for that. you live & learn.
I'm trying to teach me the 'nuts & bolts' repair and fix PC problems and I guess that's the main use for my PC. Experiment with a new £500 Pc would scare me to death.
I'm on Linux Ubuntu 13.1 without any problems on my PC Dell 9 years and XP Pro on my HP Pavilion 13, so maybe I can do my Compaq last a little longer.
Once again thank you very much. its part of the process of learning. see you soon
Recently I found a rootkit on my computer, especially rootkit.tdss.tdl4. Of after I read that I got one of the best!
I have two questions:
Firstly - how can I check if my BIOS was hit without blinking? I read that this Trojan horse could have started exactly from the BIOS, and very likely to stand again after doing a clean install. I have a laptop HP seems like flashing procedures require to disconnect the disk hard - is this true for laptops?
Second, is how I format to ensure that clean the MBR? I have Vista and want to upgrade to Windows 7. I have Windows 7 upgrade ultimate disc that can do a custom install which should format entirely. Tell me if I think too old school here but should be low (or zero) format is required? From what I've read, the function of full format of Windows 7 should be as powerful as the low level. is that correct? I don't mind the overtime work as long as I don't have any problems (at least with this Trojan) later. I also fear that upgrading Windows 7 disk might not have all the features of formatting as a full version, which is a nonsense?
Thank you very much for your help!
(Tdsskiller Rootkit removal tool)
In addition, suggest that you scan your computer with MalwareBytes' to remove all traces that may still be present.
MalwareBytes Anti-Malware (MBAM)
The free version of MBAM is a scanner at the request and offer no protection "real time". Keep and use it as "second opinion" scan.
Windows 7 tools to format the drive should be sufficient:
Boot from the Windows 7 DVD
Click Install now
Accept the license agreement
When the option is displayed to select a type of installation, click (Custom advanced)
Click on drive Options
Select the disc/s click on Delete
Click on apply
Click Format, and then click next to proceed with the installation
Can anyone help? I need to know the keys to press to enter the bios and recovery screens. If I missed anything like splash screen, then I need to know this as well.
Buy laptop just left Saturday. Quite happy with it really.
Shut down the laptop - like you are on Windows 10, do this by holding down the key SHIFT left click Shutdown to temporarily prevent a boot hybrid.
Click next to the ESC key as soon as you press the power button to access the Start Menu.
From there, you can access by pressing f11 recovery options or the menu of the Bios by pressing f10.
DP - K
I'll put up a 'new' ThinkServer RD630 (2954A6U). It was purchased for a project that never happened, and we are now dry and reuse to replace an old Office Server. The current firmware versions are:
- BIOS: 2.05
- ME: 188.8.131.52
- BMC 1.7
- IPMI 2.0
Page 61 of the User Guide ThinkServer says, "update the BIOS on your server only if the new BIOS version specifically solves a problem you have. We don't recommend updates to the BIOS for servers that do not need. [...]"
As far as I know, we have no problems. The system starts fine and runs Windows Server 2012 well enough.
HERE'S MY QUESTION:
Should I update the BIOS and firmware IMM (remote management) to the current version? Are there hidden problems, security issues or other concerns that it is worth?
Other indicators of initial configuration that you can share with a new admin would be much appreciated, too! Thank you.
With the help of the Lenovo Support, I was able to fix my problem where I couldn't get to the menu of the BIOS of the 630 RD (in F1) and all I saw was a cursor on the screen. I describe the procedure in detail here:
Thank you to all those who commented above and especially to those who have sent me suggestions via PMs.
Hello there is a problem with this laptop, the work of keyboard in the bios and in safe mode and during my convalescence... but it does not work in normal mode. (F12 wifi light is white)
Thank you very much
model: 15-r203nv rev: 2213-120 products: L0E81EA #AB7
The fact that it does not work with a clean install starts to point to some kind of hardware problem, although it is strange that he will run in Mode without failure.
Click with the right button on the taskbar, select Manager tasks, click the Startup tab - right click on each entry in turn and select Disable. Once completed, restart the computer and see if there is no change.
An update of the bios (F.39 Rev.A) is also available on the Product Page , which can be useful if you have not already done it - if you decide to apply, make sure you unplug all the devices (including the usb keyboard) before starting the update.
DP - K
I have an acer gateway ne570 and it does not start and I tried the bios and it always detects the hard drive but first boot priority is boot windows which is the only thing on the menu Manager startup options when you press on enter where the box "no boot device, press a key" comes after starting the laptop and when the gateway logo appears. I've had for over a year and the hard drive still works and my laptop didn't come with a recovery or recovery usb drive. And I also used the alt + f10 button that linked me right back to square "no boot device, press a key. Anyway, what should I do?
you need a PC to use the tool of creation of the windows window.
to boot from the CD or USB, press F12 on startup and choose the correct boot device.
I recently had a hard drive fail because of the excessive heat in the computer case (he also took a memory too). When I plug the drive as a secondary drive in any computer it will appear in the Bios and the Manager of devices, but not in disk management, nor can it be considered be as ZAR and Spinrite disk utility.
The disc spins up and down when turned on and seems to work. Just trying to recover data from the disk, so I can put it on a new drive.
If its not shown in disk management I would use this bootable HD to the utility check disk (probably all riders is set correctly?)
HP DV6 - 3161EO
Hi, I bought a brand new HP with Intel I5 processor computer and GUI double, its been working well so far and I thought that I should upgrade the Bios and memory as well.
So I did, I bought memory 10600 and crusial 12600 and corsair, a single and two put in correspondence of the sticks, just to be in business, and I've updated the bios. of F.13 to F.29
The computer worked perfectly for about 4-5 hours, then there are allmost quite dead.
Ive tried to pass on different memorycabsm like the original samsungs that came with the computer.
Ive tried the famous "hard reset".
Nothing, the computer starts "boots" but don't approach the entered message turnes off.
Presedure same each time.
Any memory I put in, the same result.
Ive used different powerbricks, turned of the computer resets hard, between 10s 2 min, picked up the bios battery, has offered free energy.
Let the rest of the computer for half a day, put it all together exept cmos battery = exactly the same as before.
"take out all the memories and the computer works and get that caps lock flashing light.
So my question is this
Why you encourage people to update, when it's clearly the fault at hand.
Sell your computers with 8 GB of ram from the beginning so the people do not have upgraded later because your hardware is not able to manage different memorycaps of accepted and authorized as crusial or corsair providers.
Ive built perhaps 50-60 computers and had about 10 laptops and NEVER had a fault like this.
My laptop $1200 is useless, and I actually held you at HP responsible of it.
The computer is of course out of warranty, so its my own falult, as usual.
«A simple question, is there a way to 'force' a new bios on the Board, without memory of the computer, because it is the only time where it works and works welll.»
Thnx, 'a sick owner HP.
For later use, it's really kff upward, but I got it working again.
1 changed the original memorycabs for much faster, 1600 mhz, I know that this mobo doesn't support, but he did start the computer, so I could run the Windows + arrows Bios recover.
Installed the HP bios tools F10 + GIS and it worked.
so I guess I have to myself a thank you and a boost of the kudosbutton, hahah
Well, when your computer went down, don't give up and try everything you can, this prob took me about 3-4 days to eradicate, but now its working again.
See you soon
I have HP 3400 MT SERIES
motherboard: Foxconn 2ABF 1.20
Version of the BIOS FRIEND brand: 7.14
How to get into bios and disable (hardware or software (I don't know)) virtualization that I have to open mac osx 10.7 in vmware
Enter the BIOS and look in the Security section, as shown in the image below. If that's what you see, then activate the virtualization technology and it's done. You will be able to use Sun's VirtualBox and other virtualization programs later
How to access the BIOS and disable hype-threading on xpTHX
During the initial boot, you should see a brief message posted to press a specific key (usually the delete key) to access the BIOS. If there is an option to disable Hyper-Threading, you will need to find it. You can also see if there is a guide for your motherboard and the BIOS options.
Any reason, you need to disable?
J W Stuart: http://www.pagestart.com
In photoshop, how to change a file .ai (converted to a smart object)? I want to change the text and changed the text and graphics.
Total beginner, so need help.
Thank you very much.
That must be edited in Illustrator.
I have a laptop nc 6400 product number: RB518UT #ABA uses an ATI mobility Radeon x 1300 graphics card, as well as Intel (r) mobile express chipset available 965 G. I chose to use Classic desktop windows at the moment and no problem at all now. I don't know about Vsync or 2D with any partbut I disabled it Aero, windows 'themes' clear the text, mosaic with not a spec left shaows WHEREAS I could think of and still the text clears using my own slider like gum or disappears and leavesablank. Alsooccasionaly gibberish are more black lines not only any official language, but today I thought that almost a nonsense post script type to some... in some mobile tiles that can refresh, but even that does not work as it always has... I am at a loss I need a decent graphics that I use photoshop and dreamweaver allt/times a day and at least they need to exploit as much as possible. I had no problem with their execution on this computer for the past 4 years or more. It has been now 4 OS on this big machine that has not had any problems over the past 7 years. He 4gig memory and 750 GB hard drive and lack of wellis touchscreen but... not worry Windows when they checked all this to check. I am beyond my capabilities and need help. Even if I need to build my own divers I Although it will not be the fastest answer, but I can see the need to know how the alter pilots an asset right about now. Please you all the
suggestions will be an asset, as I am a "what to do now the level of frustration"and would like that much more about the reason for it. " I was just as lucky as my machine has never had issues that were close to that sort of thing.
TY for any help, answers, all possible assistance, you may think. I hope that I have provided a clear problem, and most of the information you need. I never used a service like other instances, that raising any issues that others have as well. Always helping if I wasn't sure but never as difficult a question as is happening now.
Ty for any possible assistance or suggestions that can point me in the right direction.
The only suggestion I can offer would be manually install the graphics driver Vista support for your laptop and driver, page and see if it works...
BTW, the nc6400 has the mobile Intel 945 chipset, not the 965. The 6910p has the 965 chipset.
Download and run this driver... You will probably get an error of unsupported operating system.
Conclusion of any windows error.
Go to Device Manager and click on the video controller (or Microsoft based Display Adapter) who need drivers.
Click the driver tab.
Click on set to update driver.
Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.
This file will be located in C:\SWSetup\sp38833.
Make sure that the include subfolders is selected and see if the pilot goes like this.
If your nc6400 has this problem with the SMSC Infrared driver with the! Marc, I went into the BIOS, found the menu of Ports and disabled the infrared port, saved and restarted.
That got rid of the problem of device.
I don't know of anyone who uses the infrared port anyway.
Maybe you are looking for
At the office, those who work with the Mac (El Capitan) keep having this problem when they try to access and work with files that are located on the NAS. First I thought it's because more people are trying to access the same file, but I'm assured thi
Lately every time I connected my iPhone to my computer to synchronize with iTunes I get an error message that "iPhone unusable because it requires a newer version of iTunes. Go to www.itunes.com/uk to download the latest version of iTunes. " I did th
Hi all I have a laptop A200-1 body weight, the problem is that the CD/DVD is not working. I have all the recovery 3 CD for Windows Vista (Ultimate) provided by Toshiba, but I can't restore my system. Is it possible to copy the recovery on USB CD and
Hello In fact, I need to send a code word (text file) from the program matlab through my data acquisition (OR-USB-6215). my program (transmitter.vi [case structure: page2]) attached below has a problem to do the task. whenever I run the program it gi
I have 3 laptops Aspire model 1830-3595, 11 "screen, bought in 2011. Two of them lost the screw that holds the hinge on the left side next to the switch. In addition, the nut supplied with the hinge holding the screw broke off. Where can I get a new